Rờ le tép Phoenix Contact PLC-RSC-230UC/21 - 2966207 | 1-PDT 250V AC/DC 6A Coil 230VAC 220VDC

819

Nhà sản xuất:

Phoenix Contact

;

Giá sỉ:

Thông tin nổi bật

Rờ le dạng tép mỏng, cặp tiếp điểm, 250V AC/DC 6A, Coil 230VAC 220VDC, kiểu đế cắm PLC-BSC.../21

Bao gồm 2 bộ phận:

Notes on operation	Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Relay Module
Application	Universal
Operating mode	100% operating factor
Mechanical service life	2x 10⁷ cycles
Insulation characteristics
Overvoltage category	III
Pollution degree	3

Maximum power dissipation for nominal condition	0.74 W
Test voltage Winding/contact	4 kV AC (50 Hz, 1 min., winding/contact)

Coil side
Nominal input voltage U_N	230 V AC
Nominal input voltage U_N	220 V DC
Input voltage range	179.4 V AC ... 264.5 V AC (20 °C)
Input voltage range	171.6 V DC ... 253 V DC (20 °C)
Typical input current at U_N	3.2 mA (at U_N = 230 V AC)
Typical input current at U_N	3 mA (at U_N = 220 V DC)
Typical response time	7 ms
Typical release time	15 ms
Protective circuit	Bridge rectifier; Bridge rectifier
Operating voltage display	Yellow LED

Switching
Contact type	1 changeover contact
Type of switch contact	Single contact
Drive and function	monostable
Drive (polarity)	bipolar
Contact material	AgSnO
Maximum switching voltage	250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage	5 V (100 mA)
Limiting continuous current	6 A
Maximum inrush current	10 A (4 s)
Min. switching current	10 mA (12 V)
Interrupting rating (ohmic load) max.	140 W (at 24 V DC)
	20 W (at 48 V DC)
	18 W (at 60 V DC)
	23 W (at 110 V DC)
	40 W (at 220 V DC)
	1500 VA (for 250 V AC)
Switching capacity	2 A (at 24 V, DC13)
	0.2 A (at 110 V, DC13)
	0.1 A (at 220 V, DC13)
	3 A (at 24 V, AC15)
	3 A (at 120 V, AC15)
	3 A (at 230 V, AC15)

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section solid	0.14 mm² ... 2.5 mm²
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
	0.2 mm² ... 2.5 mm² (Single ferrule)
	2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG	26 ... 14
Tightening torque	0.6 Nm ... 0.8 Nm

Flammability rating according to UL 94

V0 (Housing)

Ambient conditions
Degree of protection	IP20 (Relay base)
Ambient temperature (operation)	-40 °C ... 55 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C

Standards/regulations

IEC 60947-5-1

Item number	2966207
Packing unit	10 pc
Minimum order quantity	1 pc
Sales Key	08
Product Key	CK621A
Catalog Page	Page 364 (C-5-2019)
GTIN	4017918130695
Weight per Piece (including packing)	40.31 g
Weight per Piece (excluding packing)	37.037 g
Customs tariff number	85364900
Country of origin	DE