Rơle giám sát 1P 0-10A AC/DC 1CO Phoenix Contact EMD-SL-C-UC-10 - 2867937

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Phân biệt kiểu chuyển mạch NO và NC - Switching function Normally open NO vs Normally closed NC

• 

  Các model Rờ le giám sát tải DC Siemens SIRIUS 3UG5 monitoring relays for PROFINET

• Xem thêm

Rơle giám sát 1P 0-10A AC/DC 1CO Phoenix Contact EMD-SL-C-UC-10 - 2867937

Monitoring relay for monitoring 1-phase currents of 0…10 A AC/DC, undercurrent, supply voltage can be selected via power module, 1 changeover contact

 

 

Mô tả

Nhu cầu ngày càng cao hơn về độ an toàn và tính sẵn sàng của hệ thống - trên tất cả các lĩnh vực. Các quy trình ngày càng trở nên phức tạp hơn, không chỉ trong ngành cơ khí và công nghiệp hóa chất, mà còn trong công nghệ nhà máy và tự động hóa. Nhu cầu về kỹ thuật điện cũng ngày càng tăng không ngừng.

Hoạt động không có lỗi và do đó tiết kiệm chi phí chỉ có thể đạt được thông qua việc giám sát liên tục các thông số hệ thống và mạng quan trọng. Rơle giám sát điện tử thuộc dòng EMD có sẵn cho nhiều nhiệm vụ giám sát nhằm tránh hậu quả của lỗi hoặc giữ chúng trong giới hạn.

Các trạng thái hoạt động được biểu thị bằng đèn LED màu, các lỗi có thể xảy ra có thể được gửi đến hệ thống điều khiển thông qua một tiếp điểm nổi hoặc có thể tắt một phần của hệ thống. Một số phiên bản thiết bị được trang bị độ trễ khởi động và phản hồi để có thể chịu đựng được các giá trị đo được ngoài phạm vi giám sát đã đặt trong thời gian ngắn.

 

Thông số kỹ thuật

Product properties

Product type	Current monitoring relay
Operating mode	100% operating factor
Mechanical service life	approx. 2x 107 cycles
Insulation characteristics
Insulation	Basic insulation
Insulation characteristics
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2

 

Electrical properties

Service life electrical	2x 105 cycles at ohmic load, 1000 VA
Mains type	1-phase
Rated insulation voltage	300 V
Rated surge voltage	4 kV
Supply
Supply voltage range	24 V AC ... 230 V AC (see Power modules)
	24 V DC (see Power modules)
Nominal power consumption	2 VA (1.5 W)

 

Input data

Input name	Measuring input
Measured value	DC, AC sine
Input current range	0 mA ... 100 mA (Connection terminals: I1 and GND)
	0 A ... 1 A (Connection terminals: I2 and GND)
	0 A ... 10 A (Connection terminals: I3 and GND)
Overload capacity	800 mA (at IN = 100 mA)
	3 A (at IN = 1 A)
	12 A (at IN = 10 A)
Input resistance current input	470 mΩ (at IN = 100 mA)
	47 mΩ (at IN = 1 A)
	5 mΩ (at IN = 10 A)
Frequency range	48 Hz ... 63 Hz
Maximum temperature coefficient	< 0.1 %/K
Setting range for response delay	0.2 s ... 10 s
Min. setting range	5 % ... 95 % (from IN)
Max. setting range	10 % ... 100 % (from IN)
Function	Undercurrent
Basic accuracy	± 5 % (of scale end value)
Setting accuracy	≤ 5 % (of scale end value)
Repeat accuracy	≤ 2 %
Recovery time	500 ms

 

Output data

Switching
Contact switching type	1 floating changeover contact
Maximum switching voltage	250 V AC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max.	750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
	1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing)
Output fuse	5 A (fast-blow)

 

Connection data

Cross section AWG	(converted acc. to IEC)
Connection method	Screw connection
Stripping length	8 mm
Conductor cross section rigid	0.5 mm² ... 2.5 mm²
Conductor cross section flexible	0.25 mm² ... 2.5 mm²
Conductor cross section AWG	20 ... 14

 

Dimensions

Width	22.5 mm
Height	90 mm
Depth	113 mm

 

Material specifications

Housing insulation material

Polyamide PA, self-extinguishing

 

Environmental and real-life conditions

Ambient conditions
Degree of protection (Housing)	IP40 (Housing)
Degree of protection (Connection terminal blocks)	IP20 (Connection terminal blocks)
Ambient temperature (operation)	-25 °C ... 55 °C
	-25 °C ... 40 °C (corresponds to UL 508)
Ambient temperature (storage/transport)	-25 °C ... 70 °C
Climatic class	3K3 (in acc. with EN 60721)
Permissible humidity (operation)	15 % ... 85 %

 

Approvals

CE
Certificate	CE-compliant
UL, USA/Canada
Identification	UL/C-UL Listed UL 508

 

EMC data

Low Voltage Directive	Conformance with Low Voltage Directive
Noise immunity	EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-3

 

Standards and regulations

Standards/regulations

EN 50178

 

Mounting

Mounting type	DIN rail mounting
Assembly instructions	on standard DIN rail NS 35 in accordance with EN 60715
Mounting position	any

 

Commercial data

Item number	2867937
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	CK4121
Catalog page	Page 250 (C-5-2019)
GTIN	4046356046954
Weight per piece (including packing)	136.7 g
Weight per piece (excluding packing)	134.9 g
Customs tariff number	85364900
Country of origin	AT

 

Classifications

ECLASS

ECLASS-11.0	27371802
ECLASS-12.0	27371802
ECLASS-13.0	27371802

 

ETIM

ETIM 9.0

EC001440

 

UNSPSC

UNSPSC 21.0

41113600

 

Approvals

 

EAC

Approval ID: TR_TS_D_00573_c
 

EAC

Approval ID: RU*C-DE.*08.B.00010
 

UL Listed

Approval ID: FILE E 172140
 

cUL Listed

Approval ID: FILE E 172140
 

cULus Listed

 

Environmental product compliance

China RoHS	Environmentally friendly use period: unlimited = EFUP-e
	No hazardous substances above threshold values

- Tài liệu kỹ thuật Phoenix Contact EMD-SL-C-UC-10 - 2867937 ở đây.


Tham khảo thêm các model khác cùng loại:
EMD-SL-PH-400 - Monitoring relay
2866077
Monitoring relay for monitoring phase sequence, phase failure and asymmetry, 342…457 V AC, supply from the measurement voltage, 2 changeover contacts

EMD-BL-PH-480-PT - Monitoring relay
2903528
Monitoring relay for monitoring the phase sequence and asymmetry of 3-phase voltages at 208 ... 480 V AC / 120 ... 277 V AC, configurable asymmetry, 1 changeover contact, with Push-in connection

EMD-FL-3V-400 - Monitoring relay
2866064
Monitoring relay for monitoring 3-phase voltages of 280…520 V AC, undervoltage, window, phase sequence, phase failure, asymmetry, wide range power supply unit, 2 changeover contacts

EMD-BL-PH-480 - Monitoring relay
2903527
Monitoring relay for monitoring the phase sequence and asymmetry of 3-phase voltages at 208 ... 480 V AC / 120 ... 277 V AC, configurable asymmetry, 1 changeover contact, with screw connection

EMD-BL-C-10-PT - Monitoring relay
2903522
Monitoring relay for monitoring single-phase currents of 0 ... 5 A AC or 0 ... 10 A AC, overcurrent/undercurrent or window, 1 changeover contact, with Push-in connection

EMD-SL-PH-690 - Monitoring relay
2905597
Monitoring relay for monitoring the phase sequence, phase failure and asymmetry of 3-phase voltages at 208 V AC ... 690 V AC, 2 changeover contacts, with screw connection

EMD-FL-V-300 - Monitoring relay
2866048
Monitoring relay for monitoring 1-phase voltages of 0…300 V AC/DC, overvoltage/undervoltage or window, error memory, wide range power supply unit, 2 changeover contacts

EMD-SL-C-UC-10 - Monitoring relay
2867937
Monitoring relay for monitoring 1-phase currents of 0…10 A AC/DC, undercurrent, supply voltage can be selected via power module, 1 changeover contact

EMD-BL-V-230 - Monitoring relay
2903523
Monitoring relay for monitoring 1-phase voltages of 24 V AC/DC or 230 V AC, undervoltage or window, 1 changeover contact, with screw connection

EMD-SL-PS- 24DC - Power module
2885359
Power modules, pluggable, for EMD-SL-..., supply voltage: 20 V DC ... 30 V DC

EMD-SL-LL-230 - Monitoring relay
2885906
Monitoring relay for level monitoring of conductive fluids, minimum monitoring, maximum monitoring, 230 V AC supply voltage, 2 changeover contacts

EMD-BL-V-230-PT - Monitoring relay
2903524
Monitoring relay for monitoring 1-phase voltages of 24 V AC/DC or 230 V AC, undervoltage or window, 1 changeover contact, with Push-in connection

EMD-BL-3V-400 - Monitoring relay
2903525
Monitoring relay for monitoring 3-phase voltages of 400 V AC ±30%, window or window with phase sequence, 1 changeover contact, with screw connection

EMD-SL-PTC - Monitoring relay
2866093
Monitoring relay for temperature monitoring of the motor winding (maximum 6 PTC) with error memory for temperature sensors in acc. with DIN 44081, test function with integrated test/reset button, supply voltage can be selected via power module, 2 changeover contacts

EMD-BL-PTC-PT - Monitoring relay
2906253
Temperature monitoring of the motor winding (maximum 6 PTCs) for temperature sensors according to DIN 44081 and DIN 44082 with short-circuit monitoring of the thermistor circuit, with push-in connection.

EMD-SL-PS-230AC - Power module
2866129
Power modules, pluggable, for EMD-SL-..., supply voltage: 195...264 V AC

EMD-FL-C-10 - Monitoring relay
2866022
Monitoring relay for monitoring 1-phase currents of 0 … 10 A AC/DC, overcurrent/undercurrent or window, error memory, wide range power supply unit, 2 changeover contacts

MACX-MR-PH-690 - Monitoring relay
1336404
3-phase voltage monitoring relay, 24 V AC/DC … 240 V AC/DC wide range power supply, monitoring for phase sequence, phase failure and asymmetry (with adjustable asymmetry and response delay). It can be configured using smart phone app via NFC wireless communication function, 1x2 PDT dry contact outputs, closed circuit principle, auto reset, optional screw connection and plug-in connection.

EMD-BL-PTC - Monitoring relay
2906252
Temperature monitoring of the motor winding (maximum 6 PTCs) for temperature sensors according to DIN 44081 and DIN 44082 with short-circuit monitoring of the thermistor circuit, with screw connection.

EMD-BL-C-10 - Monitoring relay
2903521
Monitoring relay for monitoring single-phase currents of 0 ... 5 A AC or 0 ... 10 A AC, overcurrent/undercurrent or window, 1 changeover contact, with screw connection

MACX-MR-PH-690-PT - Monitoring relay
1336408
3-phase voltage monitoring relay, 24 V AC/DC … 240 V AC/DC wide range power supply, monitoring for phase sequence, phase failure and asymmetry (with adjustable asymmetry and response delay). It can be configured using smart phone app via NFC wireless communication function, 1x2 PDT dry contact outputs, closed circuit principle, auto reset, optional screw connection and plug-in connection.

EMD-FL-3V-690 - Monitoring relay
2885249
Monitoring relay for monitoring 3-phase voltages of 483…897 V AC, undervoltage, window, phase sequence, phase failure, asymmetry, supply voltage can be selected via power module, 2 changeover contacts

EMD-FL-PF-400 - Monitoring relay
2885809
Monitoring relay for load monitoring (cos ϕ = 0,1…1) in 1- and 3-phase networks, underload, overload, window, error memory, wide range power supply unit, 2 changeover contacts

EMD-FL-3V-230 - Monitoring relay
2885773
Monitoring relay for monitoring 3-phase voltages of 160…300 V AC, undervoltage, window, phase sequence, phase failure, asymmetry, wide range power supply unit, 2 changeover contacts

MACX-MR-3V-690 - Monitoring relay
1336410
3-phase voltage monitoring relay, with overvoltage, undervoltage, window monitoring as well as phase sequence, phase loss failure, asymmetry (adjustable asymmetry) and neutral monitoring functions. 24 V AC/DC … 240 V AC/DC wide range power supply, with adjustable threshold values, response delay, and supporting failure record storage and NFC communication. True RMS value test.

EMD-BL-3V-400-PT - Monitoring relay
2903526
Monitoring relay for monitoring 3-phase voltages of 400 V AC ±30%, window or window with phase sequence, 1 changeover contact, with Push-in connection

MACX-MR-C-10 - Monitoring relay
1336510
Current monitoring relay, 24 V AC/DC … 240 V AC/DC wide range power supply, with adjustable threshold values, response delay, and the functions can be selected by configuration.

EMD-SL-3V-400 - Monitoring relay
2866051
Monitoring relay for monitoring 3-phase voltages of 280…520 V AC, window, without neutral conductor connection, supply voltage can be selected via power module, 1 changeover contact

EMD-SL-PS45-500AC - Power module
2885317
Power modules, pluggable, for EMD-FL-..., supply voltage: 425...550 V AC

EMD-SL-V-UV-300 - Monitoring relay
2866035
Monitoring relay for monitoring 1-phase voltages of 0…300 V AC/DC, undervoltage, supply voltage can be selected via power module, 1 changeover contact

EMD-FL-3V-500 - Monitoring relay
2867979
Monitoring relay for monitoring 3-phase voltages of 350…650 V AC, undervoltage, window, phase sequence, phase failure, asymmetry, supply voltage can be selected via power module, 2 changeover contacts

EMD-SL-PS45-230AC - Power module
2885294
Power modules, pluggable, for EMD-FL-..., supply voltage: 195 V AC ... 264 V AC

EMD-SL-PS-120AC - Power module
2885731
Power modules, pluggable, for EMD-SL-..., supply voltage: 108 V AC ... 132 V AC

EMD-SL-PS45-400AC - Power module
2885304
Power modules, pluggable, for EMD-FL-..., supply voltage: 323...456 V AC

EMD-SL-C-OC-10 - Monitoring relay
2866019
Monitoring relay for monitoring 1-phase currents of 0…10 A AC/DC, overcurrent, supply voltage can be selected via power module, 1 changeover contact

MACX-MR-V-600-PT - Monitoring relay
1336507
1-phase voltage monitoring relay, 24 V AC/DC … 240 V AC/DC wide range power supply, with adjustable threshold values, response delay, and the functions can be selected by configuration.

MACX-MR-V-600 - Monitoring relay
1336426
1-phase voltage monitoring relay, 24 V AC/DC … 240 V AC/DC wide range power supply, with adjustable threshold values, response delay, and the functions can be selected by configuration.

MACX-MR-PTC-PT - Monitoring relay
1336527
Temperature monitoring relay of the motor winding (max. 2x3 PTCs) for temperature sensors according to DIN 44081 and DIN 44082 with short-circuit monitoring of the PTC thermistor circuit, dynamic line break monitoring, 2-channel detection circuit.
It can be read using smart phone app via NFC wireless communication function, 1x2 PDT dry contact outputs, closed circuit principle, manual reset, optional screw connection and plug-in connection.

MACX-MR-3V-690-R-PT - Monitoring relay
1487448
3-phase voltage monitoring relay with RS-485 interface（160…690V AC）, with overvoltage, undervoltage, window monitoring as well as phase sequence, phase loss failure, asymmetry (adjustable asymmetry) monitoring functions. 24…240VAC/DC wide range power supply, with adjustable threshold values and response delay. Supports failure record storage. Supports NFC communication and Modbus/RTU communication, with two configuration possibilities. 1 PDT dry contact output, plug-in connection.

EMD-SL-PS-110AC - Power module
2866116
Power modules, pluggable, for EMD-SL-..., supply voltage: 88...121 V AC

MACX-MR-3V-900-PT - Monitoring relay
1336547
3-phase voltage monitoring relay, with overvoltage, undervoltage, window monitoring as well as phase sequence, phase loss failure, asymmetry (adjustable asymmetry) and neutral monitoring functions. 24 V AC/DC … 240 V AC/DC wide range power supply, with adjustable threshold values, response delay, and supporting failure record storage and NFC communication. True RMS value test.

EMD-SL-PS- 24AC - Power module
2866103
Power modules, pluggable, for EMD-SL-..., supply voltage: 20.2...26.4 V AC

MACX-MR-PTC - Monitoring relay
1336523
Temperature monitoring relay of the motor winding (max. 2x3 PTCs) for temperature sensors according to DIN 44081 and DIN 44082 with short-circuit monitoring of the PTC thermistor circuit, dynamic line break monitoring, 2-channel detection circuit.
It can be read using smart phone app via NFC wireless communication function, 1x2 PDT dry contact outputs, closed circuit principle, manual reset, optional screw connection and plug-in connection.

EMD-SL-3V-400-N - Monitoring relay
2885278
Monitoring relay for monitoring 3-phase voltages of 280…520 V AC, window, with neutral conductor connection, supply voltage can be selected via power module, 1 changeover contact

MACX-MR-3V-690-PT - Monitoring relay
1336412
3-phase voltage monitoring relay, with overvoltage, undervoltage, window monitoring as well as phase sequence, phase loss failure, asymmetry (adjustable asymmetry) and neutral monitoring functions. 24 V AC/DC … 240 V AC/DC wide range power supply, with adjustable threshold values, response delay, and supporting failure record storage and NFC communication. True RMS value test.

MACX-MR-C-10-PT - Monitoring relay
1336512
Current monitoring relay, 24 V AC/DC … 240 V AC/DC wide range power supply, with adjustable threshold values, response delay, and the functions can be selected by configuration.

EMD-FL-RP-480 - Monitoring relay
2900177
Monitoring relay for active power monitoring in 1- and 3-phase networks of 0…7.2 kW, underload, overload, window, motor winding temperature, error memory, supply voltage can be selected via power module, 2 changeover contacts

EMD-SL-LL-110 - Monitoring relay
2901137
Monitoring relay for level monitoring of conductive fluids, minimum monitoring, maximum monitoring, 110 V AC supply voltage, 2 changeover contacts