Product type | Single relay |
Operating mode | 100% operating factor |
Mechanical service life | 3x 107 cycles |
Data management status | |
Date of last data management | 02.05.2024 |
Article revision | 02 |
Insulation characteristics | |
Insulation | Basic insulation |
Overvoltage category | III |
Pollution degree | 3 |
Service life electrical | see diagram |
Maximum power dissipation for nominal condition | 0.45 W |
Test voltage (Winding/contact) | 5 kV AC (50 Hz, 1 min., winding/contact) |
Test voltage (Contact/contact) | 2.5 kV AC (50 Hz, 1 min., contact/contact) |
Coil side | |
Nominal input voltage UN | 110 V DC |
Input voltage range | 71.5 V DC ... 272.8 V DC |
Drive and function | monostable |
Drive (polarity) | non-polarized |
Typical input current at UN | 4.1 mA |
Typical response time | 7 ms |
Typical release time | 3 ms |
Coil resistance | 26600 Ω ±15 % (at 20 °C) |
Switching | |
Contact switching type | 2 changeover contacts |
Type of switch contact | Single contact |
Contact material | AgNi |
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 5 V (at 10 mA) |
Limiting continuous current | 8 A |
Maximum inrush current | 25 A (20 ms) |
Min. switching current | 10 mA (At 5 V) |
Interrupting rating (ohmic load) max. | 190 W (at 24 V DC) |
85 W (at 48 V DC) | |
60 W (at 60 V DC) | |
44 W (at 110 V DC) | |
60 W (at 220 V DC) | |
2000 VA (for 250 V AC) | |
Switching capacity | 2 A (at 24 V, DC13) |
0.2 A (at 250 V, DC13) | |
3 A (at 24 V, AC15) | |
3 A (at 120 V, AC15) | |
3 A (at 250 V, AC15) | |
Motor load according to UL 508 | 1/4 HP, 120 V AC |
1/2 HP, 240 V AC |
Connection method | Plug / solder connection |
Dimensional drawing | |
Width | 12.7 mm |
Height | 29 mm |
Depth | 15.7 mm |
Color | white (RAL 9010) |
Ambient conditions | |
Degree of protection | RT III |
Ambient temperature (operation) | -40 °C ... 85 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Corrosive gas test | |
Identification | ISA-S71.04. G3 Harsh Group |
EN 60068-2-60 |
Standards/regulations | IEC 60664 |
EN 50178 | |
EN 61810-1 |
Assembly note | Can be aligned without spacing (> 70 °C ≥ 2.5 mm) |
Mounting position | any |
Item number | 2961202 |
Packing unit | 10 pc |
Minimum order quantity | 1 pc |
Sales key | 08 |
Product key | CK6935 |
Catalog page | Page 290 (C-5-2019) |
GTIN | 4017918158002 |
Weight per piece (including packing) | 15.96 g |
Weight per piece (excluding packing) | 15 g |
Customs tariff number | 85364900 |
Country of origin | AT |
ECLASS-11.0 | 27371601 |
ECLASS-12.0 | 27371601 |
ECLASS-13.0 | 27371601 |
ETIM 9.0 | EC001437 |
UNSPSC 21.0 | 39122300 |
EU RoHS | |
Fulfills EU RoHS substance requirements | Yes (No exemptions) |
China RoHS | |
Environment friendly use period (EFUP) | EFUP-E No hazardous substances above the limits |
EU REACH SVHC | |
REACH candidate substance (CAS No.) | No substance above 0.1 wt% |