Product type | Feed-through terminal block |
Number of connections | 2 |
Number of rows | 1 |
Potentials | 1 |
Insulation characteristics | |
Overvoltage category | III |
Degree of pollution | 3 |
Rated surge voltage | 6 kV |
Maximum power dissipation for nominal condition | 0.56 W |
Number of connections per level | 2 |
Nominal cross section | 1.5 mm² |
Level 1 above 1 below 1 | |
Screw thread | M2 |
Tightening torque | 0.22 ... 0.25 Nm |
Stripping length | 7 mm |
Internal cylindrical gage | A1 |
Conductor cross section solid | 0.14 mm² ... 1.5 mm² |
Cross section AWG | 26 ... 16 (converted acc. to IEC) |
Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
Conductor cross section, flexible [AWG] | 26 ... 16 (converted acc. to IEC) |
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) | 0.25 mm² ... 0.75 mm² |
Flexible conductor cross section (ferrule with plastic sleeve) | 0.25 mm² ... 0.75 mm² |
2 conductors with same cross section, solid | 0.14 mm² ... 0.75 mm² |
2 conductors with same cross section, flexible | 0.14 mm² ... 0.75 mm² |
2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² ... 0.34 mm² |
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 0.5 mm² |
Nominal current | 17.5 A |
Maximum load current | 17.5 A (with 1.5 mm² conductor cross section) |
Nominal voltage | 500 V |
Nominal cross section | 1.5 mm² |
Rated data (ATEX/IECEx) | |
ATEX certificate | KEMA 98 ATEX 1651 U |
IEC Ex certificate | IECEx KEM 06.0034 U |
Identification | II 2 GD Ex eb IIC Gb |
Operating temperature range | -60 °C ... 110 °C |
Ex-certified accessories | 3001022 D-UK 2,5 |
1205037 SZS 0,4X2,5 VDE | |
1201442 E/UK | |
Bridge data | 15.5 A / 1.5 mm² |
Ex temperature increase | 40 K (17.5 A / 1.5 mm²) |
Rated voltage | 352 V |
for bridging with bridge | 352 V |
- At bridging between non-adjacent terminal blocks | 69 V |
Rated insulation voltage | 320 V |
Ex level General | |
Rated current | 15.5 A |
Maximum load current | 15.5 A |
Contact resistance | 0.45 mΩ |
Ex connection data General | |
Torque range | 0.22 Nm ... 0.25 Nm |
Nominal cross section | 1.5 mm² |
Rated cross section AWG | 16 |
Connection capacity rigid | 0.14 mm² ... 1.5 mm² |
Connection capacity AWG | 26 ... 16 |
Connection capacity flexible | 0.14 mm² ... 1.5 mm² |
Connection capacity AWG | 26 ... 16 |
2 conductors with same cross section, solid | 0.14 mm² ... 0.75 mm² |
2 conductors with the same cross-section AWG rigid | 26 ... 18 |
2 conductors with same cross section, stranded | 0.14 mm² ... 0.75 mm² |
2 conductors with the same cross-section AWG flexible | 26 ... 18 |
Width | 4.2 mm |
End cover width | 1.5 mm |
Height NS 35/15 | 49.5 mm |
Height NS 35/7,5 | 42 mm |
Height | 1.654 " |
Height NS 32 | 47 mm |
Length | 42.5 mm |
Color | gray |
Flammability rating according to UL 94 | V0 |
Insulating material group | I |
Insulating material | PA |
Static insulating material application in cold | -60 °C |
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) | 130 °C |
Relative insulation material temperature index (Elec., UL 746 B) | 130 °C |
Fire protection for rail vehicles (DIN EN 45545-2) R22 | HL 1 - HL 3 |
Fire protection for rail vehicles (DIN EN 45545-2) R23 | HL 1 - HL 3 |
Fire protection for rail vehicles (DIN EN 45545-2) R24 | HL 1 - HL 3 |
Fire protection for rail vehicles (DIN EN 45545-2) R26 | HL 1 - HL 3 |
Calorimetric heat release NFPA 130 (ASTM E 1354) | 28 MJ/kg |
Surface flammability NFPA 130 (ASTM E 162) | passed |
Specific optical density of smoke NFPA 130 (ASTM E 662) | passed |
Smoke gas toxicity NFPA 130 (SMP 800C) | passed |
Surge voltage test | |
Test voltage setpoint | 7.3 kV |
Result | Test passed |
Temperature-rise test | |
Requirement temperature-rise test | Increase in temperature ≤ 45 K |
Result | Test passed |
Short-time withstand current 1.5 mm² | 0.18 kA |
Result | Test passed |
Power-frequency withstand voltage | |
Test voltage setpoint | 1.89 kV |
Result | Test passed |
Mechanical data | |
Open side panel | Yes |
Mechanical strength | |
Result | Test passed |
Attachment on the carrier | |
DIN rail/fixing support | NS 32/NS 35 |
Test force setpoint | 1 N |
Result | Test passed |
Test for conductor damage and slackening | |
Rotation speed | 10 rpm |
Revolutions | 135 |
Conductor cross section/weight | 0.14 mm² / 0.2 kg |
1.5 mm² / 0.4 kg | |
Result | Test passed |
Needle-flame test | |
Time of exposure | 30 s |
Result | Test passed |
Ambient conditions | |
Ambient temperature (operation) | -60 °C ... 105 °C (max. short-term operating temperature RTI Elec.) |
Ambient temperature (storage/transport) | -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
Ambient temperature (assembly) | -5 °C ... 70 °C |
Ambient temperature (actuation) | -5 °C ... 70 °C |
Permissible humidity (storage/transport) | 30 % ... 70 % |
Connection in acc. with standard | IEC 60947-7-1 |
Mounting type | NS 35/7,5 |
NS 35/15 | |
NS 32 |
Item number | 3005837 |
Packing unit | 1 pc |
Minimum order quantity | 1 pc |
Sales Key | B01 |
Product Key | BE1211 |
Catalog Page | Page 458 (C-1-2019) |
GTIN | 4017918139179 |
Weight per Piece (including packing) | 5.296 g |
Weight per Piece (excluding packing) | 4.29 g |
Customs tariff number | 85369010 |
Country of origin | CN |