CB điện tử 1P 24VDC 6A 1NC Phoenix Contact CB E1 24DC/6A NC P - 2800919

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• Xem thêm

CB điện tử 1P 24VDC 6A 1NC Phoenix Contact CB E1 24DC/6A NC P - 2800919

Electronic circuit breaker, 1-pos., active current limitation, 1 N/C contact, plug for base element.

 

 

Technical data

Notes

General

When mounted in rows without convection cooling, the nominal device current should only be led to a maximum of 80% due to the thermal effect during continuous operation (100% operating factor). Special precautionary measures must be taken in systems or machines, to prevent components from restarting (e.g., use of a safety PLC). Parallel connection of multiple circuit breakers is not permitted.

 

Product properties

Type	Male
Product type	Device circuit breakers
Product family	CB E
Number of positions	1
No. of channels	1
Insulation characteristics
Degree of pollution	2

 

Electrical properties

No. of channels	1
General
Operating voltage	24 V DC
	18 V DC ... 30 V DC
Nominal current IN	6 A
Rated surge voltage	0.5 kV
Tripping method	E (electronic)
Required backup fuse	not required, integrated failsafe element
Dielectric strength	max. 30 V DC (Load circuit)
Active current limitation	typ. 1.25 x IN
Fuse	electronic
Closed circuit current I0	typ. 8 mA (When switched on)
	typ. 17 mA (With alarm output)
Power dissipation	1.19 W (Nominal operation)
Temperature derating	5 A (at 50 °C)
MTBF (IEC 61709, SN 29500)	8320000 h (at 25 °C with 80 % load)
	7410000 h (at 40 °C with 80 % load)
Voltage drop	130 mV (at IN)
Fail-safe element	10 A DC
Load circuit
Shutdown time	130 ms (see time/current characteristic curve)
Undervoltage switch-off	< 14 V (typ. OFF)
	> 17 V (typ. ON)
Max. capacitive load	20000 µF
Auxiliary contact
Contact connection type	floating signal contact
Minimum operating voltage Umin DC	10 V DC
Maximum operating voltage Umax DC	30 V DC
Minimum operating current Imin	10 mA
Max. operating current Imax	0.5 A

 

Connection data

Connection method

pluggable

 

Dimensions

Dimensional drawing
Width	12.3 mm
Height	45 mm
Depth	52 mm
Complete module width	12.3 mm
Complete module height	90 mm
Complete module depth	77.3 mm

 

Material specifications

Flammability rating according to UL 94

V-0

 

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP30 (Actuation area)
Ambient temperature (operation)	-25 °C ... 50 °C (non-condensing)
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Humidity test	96 h, 95 % RH, 40 °C
Vibration (operation)	3g (according to IEC 60068-2-6, Test Fc)

 

Approvals

UL approval
Identification	UL Listed UL 508
	UL Recognized UL 2367
Shipbuilding approval
Identification	DNV GL

 

Standards and regulations

Standard designation	EMV
Standards/specifications	EN 61000-6-3
Note	Interference emission
Standard designation	EMV
Standards/specifications	EN 61000-6-2
Note	Noise immunity

 

Mounting

Mounting type

on base element

 

Commercial data

Item number	2800919
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	CLA
Product key	CLA134
Catalog page	Page 383 (C-4-2019)
GTIN	4046356690683
Weight per piece (including packing)	35.2 g
Weight per piece (excluding packing)	30.6 g
Customs tariff number	85362010
Country of origin	DE

 

Classifications

ECLASS

ECLASS-11.0	27140401
ECLASS-12.0	27140401
ECLASS-13.0	27140401

 

ETIM

ETIM 8.0

EC003538

 

UNSPSC

UNSPSC 21.0

39121400

 

Approvals

UL Recognized

Approval ID: FILE E 317172

 

DNV GL

Approval ID: TAE00003KA
 

UL Listed

Approval ID: FILE E 140324

 

cUL Listed

Approval ID: FILE E 140324
 

cULus Listed

 

Environmental product compliance

REACh SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 25;
	For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

- Tài liệu kỹ thuật Phoenix Contact CB E1 24DC/6A NC P - 2800919 ở đây.


Tham khảo thêm các model khác cùng loại:
CBM E4 24DC/0.5-10A NO-R - Electronic circuit breaker
2905743
Multi-channel, electronic circuit breaker with active current limitation for protecting four loads at 24 V DC in the event of overload and short circuit. With nominal current assistant and electronic locking of the set nominal currents. For installation on DIN rails.
CBMC E4 24DC/1-10A NO - Electronic circuit breaker
2906032
Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
CBM E8 24DC/0.5-10A NO-R - Electronic circuit breaker
2905744
Multi-channel, electronic circuit breaker with active current limitation for protecting eight loads at 24 V DC in the event of overload and short circuit. With nominal current assistant and electronic locking of the set nominal currents. For installation on DIN rails.
PTCB E1 24DC/1-8A NO - Electronic circuit breaker
2908262
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With electronic interlock of the set nominal currents. For installation on DIN rails.
PTCB E1 24DC/2A NO - Electronic circuit breaker
2909903
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.
CB 1/6-2/4 PT-BE - Base element
2800929
Base element with push-in connection technology for CB ... device circuit breakers
PTCB E1 24DC/0.2A SI-R - Electronic circuit breaker
1361049
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.2 A. With remote signaling, remote reset, and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
PTCB E1 24DC/0.1-0.63A NO - Electronic circuit breaker
1441495
Single-channel, electronic device protection for 12-24 V DC loads. Nominal current adjustable from 0.1-0.63 A. With remote signaling and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
PTCB E1 24DC/0.1-0.63A SI-R - Electronic circuit breaker
1441496
Single-channel, electronic device protection for 12-24 V DC loads. Nominal current adjustable from 0.1-0.63 A. With remote signaling, remote reset, and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
PTCB E1 24DC/0.5A NO - Electronic circuit breaker
1361051
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.5 A. With remote signaling and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
PTCB E1 24DC/0.5A SI-R - Electronic circuit breaker
1361043
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.5 A. With remote signaling, remote reset, and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
PTCB E1 24DC/0.1A SI-R - Electronic circuit breaker
1464483
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.1 A. With remote signaling, remote reset, and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
CAPAROC PM S-R EX - Power module
1344363
Power module with status output and reset input for supplying the CAPAROC circuit breaker system with 12 V DC or 24 V DC. EX e approval for zone 2. For DIN rail installation via the CAPAROC current rails.
PTCB E1 24DC/0.63A SI-R - Electronic circuit breaker
1464485
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.63 A. With remote signaling, remote reset, and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
PTCB E1 24DC/0.63A NO - Electronic circuit breaker
1464486
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.63 A. With remote signaling and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
PTCB E1 24DC/0.2A NO - Electronic circuit breaker
1361055
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.2 A. With remote signaling and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
CAPAROC E2 12-24DC/2-10A EX - Electronic circuit breaker
1344364
2-channel electronic circuit breaker module for protecting 12 V DC and 24 V DC loads against overload and short circuit. Nominal current adjustable from 2 A to 10 A via step switch. EX e approval for zone 2. For DIN rail installation via the CAPAROC current rails.
PTCB E1 24DC/0.1A NO - Electronic circuit breaker
1464484
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.1 A. With remote signaling and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
CAPAROC E2 12-24DC/1-4A EX - Electronic circuit breaker
1344361
2-channel electronic circuit breaker module for protecting 12 V DC and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 4 A via step switch. EX e approval for zone 2. For DIN rail installation via the CAPAROC current rails.
CBMC E4 24DC/1-4A NO - Electronic circuit breaker
2906031
Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
PTCB E1 24DC/1-3A NO - Electronic circuit breaker
2909909
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With electronic interlock of the set nominal currents. For installation on DIN rails.
CB E1 24DC/2A S-C P - Electronic circuit breaker
2800923
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
CB E1 24DC/1A S-C P - Electronic circuit breaker
2800922
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
CB 1/10-1/10 UT-BE - Base element
2801305
Base element with screw connection technology for CB... device circuit breakers
EC-E1 4A - Electronic circuit breaker
0903026
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 4 A
CB E1 24DC/6A S-C P - Electronic circuit breaker
2800926
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
CB E1 24DC/8A S-R P - Electronic circuit breaker
2800913
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
EC-E4 2A - Electronic circuit breaker
0903033
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 2 A
CB E1 24DC/2A S-R P - Electronic circuit breaker
2800909
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
CB E1 24DC/10A NO P - Electronic circuit breaker
2800907
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
PTCB E1 24DC/1-4A NO - Electronic circuit breaker
2908261
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With electronic interlock of the set nominal currents. For installation on DIN rails.
PTCB E1 24DC/1-8A SI-R - Electronic circuit breaker
1135752
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
CB E1 24DC/10A S-R P - Electronic circuit breaker
2800914
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
CBMC E4 24DC/1-10A S-R - Electronic circuit breaker
1065729
Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload or short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.
CBMC E4 24DC/1-10A IOL - Electronic circuit breaker
2910411
Multi-channel electronic circuit breaker with IO-Link interface for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
CB E1 24DC/2A NC P - Electronic circuit breaker
2800916
Electronic circuit breaker, 1-pos., active current limitation, 1 N/C contact, plug for base element.
EC-E1 3A - Electronic circuit breaker
0903025
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 3 A
PTCB E1 24DC/8A NO - Electronic circuit breaker
2909910
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.
CBB 08 2X4RC-PT - Potential distributors
2905240
Device circuit breaker boards for eight thermomagnetic (CB TM1...) or electronic (CB E1... NO) circuit breakers with group remote signaling, central supply, connection for relay contacts, and potential distribution for up to four loads per channel.
TMCP SOCKET M - Box mounting base
0916589
Modular socket element, 2-position, for holding two circuit breakers, each with a single position
CB E1 24DC/4A S-C P - Electronic circuit breaker
2800925
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
EC-E1 6A - Electronic circuit breaker
0903028
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 6 A
PTCB E1 24DC/1A NO - Electronic circuit breaker
2909902
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.
CB E1 24DC/6A NC P - Electronic circuit breaker
2800919
Electronic circuit breaker, 1-pos., active current limitation, 1 N/C contact, plug for base element.
CB E1 24DC/6A NO P - Electronic circuit breaker
2800905
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
CB E1 24DC/4A NO P - Electronic circuit breaker
2800904
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
CB E1 24DC/1A NO P - Electronic circuit breaker
2800901
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
CBMC E4 24DC/1-10A S-R-C - Electronic circuit breaker
1103875
Multi-channel electronic circuit breaker that can be preconfigured, for protecting four loads at 24 V DC in the event of overload and short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.
EC 1 12DC/3A S-C - Electronic circuit breaker
3000756
Electronic circuit breaker, on/off control input, nominal current: 3 A
CB E1 24DC/8A NO P - Electronic circuit breaker
2800906
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
EC-E4 12A - Electronic circuit breaker
0903039
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 12 A
CB E1 24DC/1A NC P - Electronic circuit breaker
2800915
Electronic circuit breaker, 1-pos., active current limitation, 1 N/C contact, plug for base element.
PTCB E1 24DC/1-8A NO2 - Electronic circuit breaker
1388391
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With electronic interlock of the set nominal currents. The signal contact opens if the channel has been switched off manually or due to a fault. For installation on DIN rails.
TMC 7/8 ALARM - Thermomagnetic device circuit breaker
2908220
Thermomagnetic device circuit breaker, number of positions: 1, connection method: Screw, cross section: 1 mm2- 35 mm2, AWG: 18 - 2, mounting type: Snaps on to side of circuit breaker
TMC 7/8 12VDC SHNT - Thermomagnetic device circuit breaker
2908221
Thermomagnetic device circuit breaker, number of positions: 1, connection method: Screw, cross section: 1 mm2- 35 mm2, AWG: 18 - 2, mounting type: Snaps on to side of circuit breaker
FBST 500 TMC-N GY - Continuous plug-in bridge
0901028
Continuous plug-in bridge, mounting type: Plug-in mounting
CB E1 24DC/4A S-R P - Electronic circuit breaker
2800911
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
EC-E 2A DC24V - Electronic circuit breaker
0903043
Electronic circuit breaker, 1 reset input, nominal current: 2 A
EC-E4 6A - Electronic circuit breaker
0903036
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 6 A
PTCB E1 24DC/1-4A SI-R - Electronic circuit breaker
1135753
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
EC-E4 1A - Electronic circuit breaker
0903032
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 1 A
EC-E 6A DC24V - Electronic circuit breaker
0903046
Electronic circuit breaker, 1 reset input, nominal current: 6 A
PTCB E1 24DC/3A NO - Electronic circuit breaker
2909904
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.
CAPAROC E4 12-24DC/1-10A - Electronic circuit breaker
1115658
Four-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 10 A via LED button. For DIN rail installation via the CAPAROC current rails.
CBB TM 12 2X6RC P-PT - Potential distributors
2801483
Device circuit breaker boards for twelve CB TM1... thermomagnetic circuit breakers with group remote signaling, central supply, and potential distribution for up to five loads per channel.
TMC 7/8 120VAC SHNT - Thermomagnetic device circuit breaker
2908226
Thermomagnetic device circuit breaker, number of positions: 1, connection method: Screw, cross section: 1 mm2- 35 mm2, AWG: 18 - 2, mounting type: Snaps on to side of circuit breaker
CAPAROC E4 12-24DC/1-4A - Electronic circuit breaker
1115657
Four-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 4 A via LED button. For DIN rail installation via the CAPAROC current rails.
CAPAROC CR 20 - Busbar
1110989
Busbar for CAPAROC system with 20 slots. For installation on a DIN rail.
CAPAROC E1 12-24DC/8A - Electronic circuit breaker
1157279
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
EC-E1 12A - Electronic circuit breaker
0903031
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 12 A

EC 1 12DC/6A S-C - Electronic circuit breaker
3000758
Electronic circuit breaker, on/off control input, nominal current: 6 A

CAPAROC E2 12-24DC/1-4A - Electronic circuit breaker
1115655
2-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 4 A via step switch. For DIN rail installation via the CAPAROC current rails.

CBB 04 2X2RC-PT - Potential distributors
2905238
Device circuit breaker boards for four thermomagnetic (CB TM1...) or electronic (CB E1... NO) circuit breakers with group remote signaling, central supply, connection for relay contacts, and potential distribution for up to four loads per channel.
EC-E4 4A - Electronic circuit breaker
0903035
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 4 A
FBST 21-PLC GY - Continuous plug-in bridge
0901015
Continuous plug-in bridge, length: 21 mm, color: gray
EC-E 0,5A DC24V - Electronic circuit breaker
0903041
Electronic circuit breaker, 1 reset input, nominal current: 0.5 A
EC-E1 1A - Electronic circuit breaker
0903023
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 1 A
CAPAROC PM IOL - Power module
1115670
Power module with IO-Link interface for supplying the CAPAROC circuit breaker system with 12 or 24 V DC for up to 20 channels. For DIN rail installation via the CAPAROC current rails.
EC 1 12DC/1A S-C - Electronic circuit breaker
3000754
Electronic circuit breaker, on/off control input, nominal current: 1 A
CAPAROC E1 12-24DC/4A - Electronic circuit breaker
1157285
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
CB E1 24DC/8A S-C P - Electronic circuit breaker
2800927
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
PTCB E1 24DC/6A SI-R - Electronic circuit breaker
1135740
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
EC-E 8A DC24V - Electronic circuit breaker
0903047
Electronic circuit breaker, 1 reset input, nominal current: 8 A
PTCB E1 24DC/1A SI-R - Electronic circuit breaker
1135751
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
EC 1 12DC/10A S-C - Electronic circuit breaker
3000759
Electronic circuit breaker, on/off control input, nominal current: 10 A
EC 1 12DC/1A S-R - Electronic circuit breaker
3000760
Electronic circuit breaker, reset input and status output, nominal current: 1 A
TMC 7/8 125VDC SHNT - Thermomagnetic device circuit breaker
2908225
Thermomagnetic device circuit breaker, number of positions: 1, connection method: Screw, cross section: 1 mm2- 35 mm2, AWG: 18 - 2, mounting type: Snaps on to side of circuit breaker
CB RC BRIDGE - Bridge
2801616
Bridge plug for bridging contacts 11 to 14 for CB base elements
PTCB E1 24DC/6A NO - Electronic circuit breaker
2909908
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.
EC-E 12A DC24V - Electronic circuit breaker
0903049
Electronic circuit breaker, 1 reset input, nominal current: 12 A
CBB TM 08 2X4RC P-PT - Potential distributors
2801482
Device circuit breaker boards for eight CB TM1... thermomagnetic circuit breakers with group remote signaling, central supply, and potential distribution for up to five loads per channel.
CBB 12 2X6RC-PT - Potential distributors
2905241
Device circuit breaker boards for twelve thermomagnetic (CB TM1...) or electronic (CB E1... NO) circuit breakers with group remote signaling, central supply, connection for relay contacts, and potential distribution for up to four loads per channel.
CBB TM 04 2X2RC P-PT - Potential distributors
2801481
Device circuit breaker boards for four CB TM1... thermomagnetic circuit breakers with group remote signaling, central supply, and potential distribution for up to five loads per channel.
TMC 7/8 277VAC SHNT - Thermomagnetic device circuit breaker
2908228
Thermomagnetic device circuit breaker, number of positions: 1, connection method: Screw, cross section: 1 mm2- 35 mm2, AWG: 18 - 2, mounting type: Snaps on to side of circuit breaker
EC-E 4A DC24V - Electronic circuit breaker
0903045
Electronic circuit breaker, 1 reset input, nominal current: 4 A
CBMC EG4 24DC/1-8A NO - Electronic circuit breaker
1065730
Multi-channel electronic circuit breaker with electrical isolation for protecting four loads at 24 V DC in the event of overload or short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
EC 1 12DC/2A S-R - Electronic circuit breaker
3000761
Electronic circuit breaker, reset input and status output, nominal current: 2 A
PTCB E1 24DC/4A NO - Electronic circuit breaker
2909906
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.
CBMC E4 24DC/1-4A NO-C - Electronic circuit breaker
2908713
Multi-channel electronic circuit breaker that can be preconfigured, for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
CAPAROC E1 12-24DC/10A - Electronic circuit breaker
1157284
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
TMC 7/8 240VAC SHNT - Thermomagnetic device circuit breaker
2908227
Thermomagnetic device circuit breaker, number of positions: 1, connection method: Screw, cross section: 1 mm2- 35 mm2, AWG: 18 - 2, mounting type: Snaps on to side of circuit breaker
FBST 500 TMCP - Plug-in bridge
0916615
Plug-in bridge
CAPAROC PD 0V - Potential distributors
1110987
Potential distributor with Push-in connections for directly connecting the 0 V return conductor in the CAPAROC system. For DIN rail installation via the CAPAROC current rails.
CB E1 24DC/4A NC P - Electronic circuit breaker
2800918
Electronic circuit breaker, 1-pos., active current limitation, 1 N/C contact, plug for base element.
CB PT BRIDGE - Bridge
2801014
Bridge plug for bridging contacts 1 to 2 for CB base elements
EC-E 3A DC24V - Electronic circuit breaker
0903044
Electronic circuit breaker, 1 reset input, nominal current: 3 A
CBMC EG4 24DC/1-8A NO-C - Electronic circuit breaker
1449883
Multi-channel electronic circuit breaker with electrical isolation for protecting four loads at 24 V DC in the event of overload or short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
TMCP SB - Bridge
0916602
Signal bridge, pluggable, for bridging group signaling when there is a free slot on the TMCP SOCKET M socket
EC 1 12DC/6A S-R - Electronic circuit breaker
3000765
Electronic circuit breaker, reset input and status output, nominal current: 6 A
CB E1 24DC/2A NO P - Electronic circuit breaker
2800902
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
PTCB E1 24DC/2A SI-R - Electronic circuit breaker
1135749
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
CAPAROC E1 12-24DC/1-10A - Electronic circuit breaker
1115649
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 10 A via LED button. For DIN rail installation via the CAPAROC current rails.
CAPAROC PM PN - Power module
1110986
Power module with PROFINET interface for supplying the CAPAROC circuit breaker system with 12 or 24 V DC. Additional system interface for communication with the power supply. For DIN rail installation via the CAPAROC current rails.
EC-E4 3A - Electronic circuit breaker
0903034
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 3 A
CAPAROC E1 12-24DC/1-4A - Electronic circuit breaker
1115415
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 4 A via LED button. For DIN rail installation via the CAPAROC current rails.
EC 1 12DC/4A S-R - Electronic circuit breaker
3000763
Electronic circuit breaker, reset input and status output, nominal current: 4 A
CBMC E4 24DC/1-10A NO-C - Electronic circuit breaker
2908716
Multi-channel electronic circuit breaker that can be preconfigured, for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
CB E1 24DC/3A S-C P - Electronic circuit breaker
2800924
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
CAPAROC E2 12-24DC/2-10A - Electronic circuit breaker
1110984
2-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 2 A to 10 A via step switch. For DIN rail installation via the CAPAROC current rails.
EC 1 12DC/10A S-R - Electronic circuit breaker
3000766
Electronic circuit breaker, reset input and status output, nominal current: 10 A
EC-E1 0,5A - Electronic circuit breaker
0903022
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 0.5 A
CAPAROC E1 12-24DC/6A - Electronic circuit breaker
1157286
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
CBMC E4 24DC/1-4A S-R - Electronic circuit breaker
1065727
Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload or short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.
EC-E1 10A - Electronic circuit breaker
0903030
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 10 A
EC 1 12DC/3A S-R - Electronic circuit breaker
3000762
Electronic circuit breaker, reset input and status output, nominal current: 3 A
TMC 7/8 48VDC SHNT - Thermomagnetic device circuit breaker
2908224
Thermomagnetic device circuit breaker, number of positions: 1, connection method: Screw, cross section: 1 mm2- 35 mm2, AWG: 18 - 2, mounting type: Snaps on to side of circuit breaker
CB E1 24DC/6A S-R P - Electronic circuit breaker
2800912
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
EC 1 12DC/4A S-C - Electronic circuit breaker
3000757
Electronic circuit breaker, on/off control input, nominal current: 4 A
EC-E4 10A - Electronic circuit breaker
0903038
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 10 A
CAPAROC PM S-R - Power module
1115661
Power module with status output and reset input for supplying the CAPAROC circuit breaker system with 12 or 24 V DC. For DIN rail installation via the CAPAROC current rails.
EC-E1 2A - Electronic circuit breaker
0903024
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 2 A
CAPAROC E1 12-24DC/2A - Electronic circuit breaker
1157290
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
CB E1 24DC/3A S-R P - Electronic circuit breaker
2800910
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
EC 1 12DC/2A S-C - Electronic circuit breaker
3000755
Electronic circuit breaker, on/off control input, nominal current: 2 A
CB E1 24DC/3A NC P - Electronic circuit breaker
2800917
Electronic circuit breaker, 1-pos., active current limitation, 1 N/C contact, plug for base element.
CBMC E4 24DC/1-4A+ IOL - Electronic circuit breaker
2910410
Multi-channel electronic circuit breaker with IO-Link interface for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
PTCB E1 24DC/4A SI-R - Electronic circuit breaker
1135745
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
CB E1 24DC/3A NO P - Electronic circuit breaker
2800903
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
CB S-BE - Base element
2905067
Solder base element for PCB mounting for accommodating CB TM... or CB E... device circuit breakers
EC-E1 8A - Electronic circuit breaker
0903029
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 8 A
CB E1 24DC/10A S-C P - Electronic circuit breaker
2800928
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
CAPAROC - Electronic circuit breaker
1290013
Customizable electronic circuit breaker system for protecting loads at 12 and 24 V DC. Configured from power modules, circuit breakers, and potential distributor modules. For DIN rail installation via the CAPAROC current rails.
EC-E4 8A - Electronic circuit breaker
0903037
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 8 A
EC-E 1A DC24V - Electronic circuit breaker
0903042
Electronic circuit breaker, 1 reset input, nominal current: 1 A
CB E1 24DC/1A S-R P - Electronic circuit breaker
2800908
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
CBMC E4 24DC/1-4A S-R-C - Electronic circuit breaker
1103876
Multi-channel electronic circuit breaker that can be preconfigured, for protecting four loads at 24 V DC in the event of overload and short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.
EC-E4 0,5A - Electronic circuit breaker
0903040
Electronic circuit breaker
EC-E 10A DC24V - Electronic circuit breaker
0903048
Electronic circuit breaker, 1 reset input, nominal current: 10 A
PTCB E1 24DC/8A SI-R - Electronic circuit breaker
1135734
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
TMC 7/8 AUX - Thermomagnetic device circuit breaker
2908219
Thermomagnetic device circuit breaker, number of positions: 1, connection method: Screw, cross section: 1 mm2- 35 mm2, AWG: 18 - 2, mounting type: Snaps on to side of circuit breaker
TMC 7/8 24VDC SHNT - Thermomagnetic device circuit breaker
2908222
Thermomagnetic device circuit breaker, number of positions: 1, connection method: Screw, cross section: 1 mm2- 35 mm2, AWG: 18 - 2, mounting type: Snaps on to side of circuit breaker
CAPAROC E1 12-24DC/1A - Electronic circuit breaker
1157288
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.