Chống sét lan truyền T3 230VAC 3kA 25ns Phoenix Contact PT 2-PE/S-230AC/FM - 2858357

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Full Video hiếm -Tìm hiểu chi tiết bên trong một Bộ thiết bị chống sét lan truyền SPD

• 

  5 Điều Quan Trọng Cần Biết Về Thiết Bị Chống Sét Lan Truyền

• Xem thêm

Chống sét lan truyền T3 230VAC 3kA 25ns Phoenix Contact PT 2-PE/S-230AC/FM - 2858357

Pluggable type 3 arrester (device protection) for single-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE) with remote indication contact.

No longer in product range, Replacement product:

PLT-SEC-T3-230-FM-UT - 2907919

Type 3 surge protection device
 

Technical data

Product properties

Product type	Device protection
IEC power supply system	TT
	TN-S
Type	DIN rail module, two-section, divisible
Number of positions	2
Surge protection fault message	Optical, remote indicator contact
Insulation characteristics
Overvoltage category	III
Pollution degree	2
Arrester can be tested with CHECKMASTER from software version:	From SW rev. 1.00
IEC test classification	III
	T3
EN type	T3

 

Electrical properties

Indicator/remote signaling
Connection name	Remote fault indicator contact
Switching function	N/C contact
Maximum operating voltage Umax. AC	250 V
Max. operating current Imax	3 A AC

 

Connection data

Connection method	Screw connection
Screw thread	M3
Tightening torque, min	0.8 Nm
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	4 mm²

Dimensions

Dimensional drawing
Width	17.7 mm
Height	90 mm
Depth	65.5 mm
Horizontal pitch	1 Div.
Complete module width	17.7 mm
Complete module height	90 mm
Complete module depth	65.5 mm

 

Material specifications

Flammability rating according to UL 94	V-0
Housing material	PA 6.6

 

Protective circuit

Direction of action	1L-N & N-PE
Nominal frequency fN	50 Hz
	60 Hz
Maximum continuous voltage UC	253 V AC
Rated load current IL	26 A (30 °C)
Residual current IPE	≤ 2.5 µA
Standby power consumption PC	≤ 350.00 mVA
Nominal discharge current In (8/20) µs	3 kA
	3 kA (in acc. with UL 1449)
Nominal discharge current In (8/20) µs (L-N)	3 kA
Nominal discharge current In (8/20) µs (L-PE)	3 kA
Voltage protection level Up (L-N)	≤ 1.1 kV
Voltage protection level Up (L-PE)	≤ 1.5 kV
	≤ 600 V (asymmetrical (PE) static)
Voltage protection level Up (N-PE)	≤ 1.5 kV
	≤ 600 V (asymmetrical (PE) static)
Residual voltage at In	≤ 1.1 kV
	≤ 600 V
	≤ 600 V
Response time tA (L-N)	≤ 25 ns
Response time tA (L-PE)	≤ 100 ns
Max. required back-up fuse	25 A (gL)
	25 A (MCB 25 A B/C)
Short-circuit withstand capability IP with max. backup fuse (r.m.s.)	1.5 kA

 

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
	IP20
Ambient temperature (operation)	-40 °C ... 85 °C

 

Standards and regulations

Air clearances and creepage distances
Standards/regulations	DIN VDE 0110-1 / IEC 60664-1
Standards
Standards/regulations	IEC 61643-1
	EN 61643-11/A11
	NF C61-740
	IEC 61643-1
	EN 61643-11/A11
	UL 1449
	NF C61-740
Standards/specifications	IEC 61643-1
Note	2005
Standards/specifications	EN 61643-11/A11
Note	2007
Standards/specifications	UL 1449

 

Mounting

Mounting type

DIN rail: 35 mm

 

Commercial data

Item number	2858357
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	CL1411
Catalog page	Page 56 (C-6-2013)
GTIN	4017918878955
Weight per piece (including packing)	81 g
Weight per piece (excluding packing)	70.44 g
Customs tariff number	85363090
Country of origin	DE

- Tài liệu kỹ thuật Phoenix Contact PT 2-PE/S-230AC/FM -  2858357 ở đây