Chi tiết thông tin đặc tính sản phẩm
Solid-state relay terminal block DEK-OE- 24DC/ 24DC/100KHZ - 2964283 Phoenix Contact - Rơ le 24VDC 4-30VDC 50mA 100kHz
Input solid-state relay, transmission frequency: 100 kHz, with LED and protective circuit in input and output circuits, input: 24 V DC, output: 4 - 30 V DC/50 mA
Bản vẽ kỹ thuật

Circuit diagram
Chú ý
Utilization restriction |
EMC: class A product, see manufacturer's declaration in the download area |
Type of note |
Note on application |
Note |
Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. |
Dimensions
Width |
6.2 mm |
Height |
80 mm |
Depth |
56 mm |
Ambient conditions
Ambient temperature (operation) |
-20 °C ... 60 °C |
Ambient temperature (storage/transport) |
-20 °C ... 70 °C |
Input data
Nominal input voltage UN |
24 V DC |
Input voltage range in reference to UN |
0.8 ... 1.2 |
Input voltage range |
19.2 V DC ... 28.8 V DC |
Switching threshold "0" signal in reference to UN |
≤ 0.4 |
Switching threshold "1" signal in reference to UN |
≥ 0.8 |
Typical input current at UN |
6 mA |
Typical response time |
1.5 µs |
Typical turn-off time |
2 µs |
Operating voltage display |
Yellow LED |
Type of protection |
Reverse polarity protection |
|
Surge protection |
Protective circuit/component |
Polarity protection diode |
Transmission frequency |
100 kHz |
Power dissipation for nominal condition |
3 mW |
Output data
Output voltage range |
4 V DC ... 30 V DC |
Limiting continuous current |
50 mA |
Quiescent current |
4.3 mA |
Voltage drop at max. limiting continuous current |
≤ 0.5 V DC |
Output circuit |
3-conductor, ground-referenced |
Type of protection |
Surge protection |
Protective circuit/component |
Suppressor diode |
General
Test voltage input/output |
2.5 kV AC |
Mounting position |
any |
Assembly instructions |
In rows with zero spacing |
Operating mode |
100% operating factor |
Connection data
Connection name |
Input side |
Connection method |
Screw connection |
Stripping length |
8 mm |
Screw thread |
M3 |
Conductor cross section solid |
0.2 mm² ... 4 mm² |
Conductor cross section flexible |
0.2 mm² ... 2.5 mm² |
Conductor cross section AWG |
24 ... 12 |
Torque |
0.5 Nm |
Connection data 2
Connection name |
Output side |
Connection method |
Screw connection |
Stripping length |
8 mm |
Screw thread |
M3 |
Conductor cross section solid |
0.2 mm² ... 4 mm² |
Conductor cross section flexible |
0.2 mm² ... 2.5 mm² |
Conductor cross section AWG |
24 ... 12 |
Torque |
0.5 Nm |
Standards and Regulations
Standards/regulations |
IEC 60664 |
|
EN 50178 |
Insulation |
Basic insulation |
Pollution degree |
2 |
Overvoltage category |
II |
Environmental Product Compliance
REACh SVHC |
Lead 7439-92-1 |
China RoHS |
Environmentally Friendly Use Period = 50 years |
|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Classifications
eCl@ss
eCl@ss 10.0.1 |
27371604 |
eCl@ss 4.0 |
27371100 |
eCl@ss 4.1 |
27371100 |
eCl@ss 5.0 |
27371000 |
eCl@ss 5.1 |
27371000 |
eCl@ss 6.0 |
27371600 |
eCl@ss 7.0 |
27371604 |
eCl@ss 8.0 |
27371604 |
eCl@ss 9.0 |
27371604 |
ETIM
ETIM 2.0 |
EC001504 |
ETIM 3.0 |
EC001504 |
ETIM 4.0 |
EC001504 |
ETIM 5.0 |
EC001504 |
ETIM 6.0 |
EC001504 |
ETIM 7.0 |
EC001504 |
UNSPSC
UNSPSC 6.01 |
30211916 |
UNSPSC 7.0901 |
39121542 |
UNSPSC 11 |
39121542 |
UNSPSC 12.01 |
39121542 |
UNSPSC 13.2 |
39122326 |
UNSPSC 18.0 |
39122326 |
UNSPSC 19.0 |
39122326 |
UNSPSC 20.0 |
39122326 |
UNSPSC 21.0 |
39122326 |