Rờ le an toàn 2-Kênh Phoenix Contact PSR-SPP- 24UC/ESA4/3X1/1X2/B - 2963941

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Full Video về Sự khác nhau giữa Contactor và Relay

• 

  Rờ le giám sát dòng Siemens SIRIUS 3RR24 cho 3RT2

• Xem thêm

Rờ le an toàn 2-Kênh 24VDC Phoenix Contact PSR-SPP- 24UC/ESA4/3X1/1X2/B - 2963941

Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 3 enabling current paths, nominal input voltage: 24 V DC, pluggable Push-in terminal block

 

Thông số kỹ thuật

Product properties

Product type	Safety relays
Product family	PSRclassic
Application	Emergency stop
	Safety door
Mechanical service life	approx. 107 cycles
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3

 

Electrical properties

Maximum power dissipation for nominal condition	16.44 W (US = 26.4 V, IL² = 72 A², PTotal max = 2.04 W + 14.4 W)
Nominal operating mode	100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V
Rated surge voltage/insulation	See section “Insulation coordination”

 

Input data

General
Rated control circuit supply voltage US	24 V DC -15 % / +10 %
Power consumption at US	typ. 1.68 W (DC)
Rated control supply current IS	typ. 70 mA
Input voltage range in reference to UN	0.85 ... 1.1
Typical input current at UN	70 mA DC (at US)
Inrush current	< 3.5 A (Δt = 3 ms at Us)
	< 100 mA (Δt = 500 ms, with Us/Ix at S12)
	> -100 mA (Δt = 300 ms, with Us/Ix at S22)
	< 6 mA (with Us/Ix to S34)
Current consumption	typ. 38 mA (S12)
	typ. -38 mA (S22)
	typ. 1 mA (with Us/Ix to S34)
Voltage at input/start and feedback circuit	approx. 24 V DC
Filter time	5 ms (at A1 in the event of voltage dips at Us)
	No test pulses permitted
Typical response time	150 ms (automatic start)
Typ. starting time with Us	250 ms (with Us when controlled via A1)
Typical release time	20 ms (on demand via the sensor circuit)
	45 ms (on demand via A1)
Concurrence	∞
Recovery time	1 s (following demand of the safety function)
	< 1 s (Boot time)
Protective circuit	Surge protection; Suppressor diode
Max. permissible overall conductor resistance	approx. 50 Ω (Input and start circuits at US)
Operating voltage display	Green LED
Status display	Green LED

 

Output data

Contact switching type	3 enabling current paths
	1 signaling current path
Contact material	AgSnO2, + 0.2 µm Au
Maximum switching voltage	250 V AC
Minimum switching voltage	10 V AC/DC
Limiting continuous current	6 A (N/O contact)
Maximum inrush current	6 A
Inrush current, minimum	10 mA
Sq. Total current	72 A2 (Enabling current paths)
	36 A2 (Signaling current path 31/32)
Switching capacity min.	100 mW
Switching capacity in accordance with IEC 60947-5-1	DC13, enabling current paths
	AC15, enabling current paths
	2 A (DC13, signaling current paths)
	1.5 A (AC15, signaling current paths)
Output fuse	10 A gL/gG (Enabling current paths)
	4 A gL/gG (Low-demand enabling current paths)
	6 A gL/gG (Signaling current path)

 

Connection data

Connection technology
pluggable	yes
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross-section AWG	24 ... 16
Stripping length	8 mm

 

Dimensions

Width	22.5 mm
Height	112 mm
Depth	114.5 mm

 

Material specifications

Housing material

Polyamide

 

Characteristics

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	4
Performance level (PL)	e (5 A DC13; 5 A AC15; 8760 switching cycles/year)
Safety data: IEC 61508 - High demand
Safety Integrity Level (SIL)	3
Safety data: IEC 61508 - Low demand
Safety Integrity Level (SIL)	3
Safety data: EN IEC 62061
Safety Integrity Level (SIL)	3

 

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-20 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g
Vibration (operation)	10 Hz ... 150 Hz, 2g

 

Standards and regulations

Air clearances and creepage distances between the power circuits
Standards/regulations	DIN EN 60947-1

 

Mounting

Mounting type	DIN rail mounting
Assembly instructions	See derating curve
Mounting position	vertical or horizontal
Connection method	Push-in connection

 

Commercial data

Item number	2963941
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	DNA113
Catalog page	Page 21 (IF-2009)
GTIN	4017918904784
Weight per piece (including packing)	192.3 g
Weight per piece (excluding packing)	159.02 g
Customs tariff number	85371098
Country of origin	DE

 

Classifications

ECLASS

ECLASS-11.0	27371819
ECLASS-13.0	27371819
ECLASS-12.0	27371819

 

ETIM

ETIM 9.0

EC001449

 

UNSPSC

UNSPSC 21.0

39122205

 

Approvals

EAC

Approval ID: EAC-Zulassung
 

EAC

Approval ID: TR_TS_D_00573_c
 

UL Listed

Approval ID: FILE E 140324
 

cUL Listed

Approval ID: FILE E 140324
 

cUL Listed

Approval ID: FILE E 140324
 

Functional Safety

Approval ID: 01/205/0652.05/22
 

Functional Safety

Approval ID: 01/205/0652.05/22
 

Functional Safety

Approval ID: 968/EZ 404.07/22
 

Environmental product compliance

REACh SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 50 years
	For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

- Tài liệu kỹ thuật Phoenix Contact PSR-SPP- 24UC/ESA4/3X1/1X2/B - 2963941 ở đây.