Rờ le an toàn Phoenix Contact PSR-SCP- 24UC/ESAM4/8X1/1X2 - 2963912
Thông số kỹ thuật
Đặc tính
Product type |
Safety relays |
Product family |
PSRclassic |
Application |
Emergency stop |
Safety door |
Mechanical service life |
approx. 107 cycles |
Relay type |
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
Thống số điện tính
Maximum power dissipation for nominal condition |
31.7 W (US = 26.4 V, IL² = 144 A², PTotal max = 2.9 W + 28.8 W) |
Nominal operating mode |
100% operating factor |
Air clearances and creepage distances between the power circuits |
Rated insulation voltage |
250 V |
Rated surge voltage/insulation |
Basic insulation 4 kV:
between all current paths and housing
Safe isolation, reinforced insulation 6 kV:
between A1/A2 and 63/64, 73/74, 83/84
between S10/S11/S12/S33/S34/S35 and 63/64, 73/74, 83/84
between 63/64, 73/74, 83/84 among one another |
Thông số đầu vào
General |
Rated control circuit supply voltage US |
24 V DC -15 % / +10 % |
Power consumption at US |
typ. 2.4 W (DC) |
Rated control supply current IS |
typ. 100 mA DC (at US) |
Inrush current |
3.5 A (Δt = 2 ms at Us) |
max. 150 mA (Δt = 1 ms, with Us/Ix at S10) |
max. 200 mA (Δt = 1 ms, with Us/Ix at S12) |
max. -180 mA (Δt = 1 ms, with Us/Ix at S22) |
< 10 mA (with Us/Ix to S34) |
< 10 mA (with Us/Ix to S35) |
Current consumption |
50 mA (with Us/Ix to S10) |
50 mA (with Us/Ix to S12) |
-50 mA (with Us/Ix to S22) |
0 mA (with Us/Ix to S34) |
1 mA (with Us/Ix to S35) |
Voltage at input/start and feedback circuit |
24 V DC -15 % / +10 % |
Filter time |
2 ms (at A1 in the event of voltage dips at Us) |
max. 1.5 ms (at S10, S12; test pulse width) |
7.5 ms (at S10, S12; test pulse rate) |
Test pulse rate = 5 x Test pulse width |
Typical response time |
< 120 ms (automatic start) |
< 140 ms (manual start) |
Typ. starting time with Us |
< 200 ms (when controlled via A1) |
Typical release time |
< 20 ms (when controlled via S11/S12 and S21/S22) |
< 50 ms (when controlled via A1) |
Concurrence |
∞ |
Recovery time |
< 500 ms (following demand of the safety function) |
< 1 s (Boot time) |
Maximum switching frequency |
0.5 Hz |
Protective circuit |
Surge protection; Suppressor diode |
Max. permissible overall conductor resistance |
11 Ω (Input sensor circuit S10,S12,S22) |
50 Ω (S34,S35 start circuit input) |
Operating voltage display |
1 x green LED |
Status display |
2 x green LEDs |
Thông số đầu ra
Contact type |
8 enabling current paths |
1 signaling current path |
Contact material |
AgSnO2 |
Maximum switching voltage |
250 V AC |
Minimum switching voltage |
5 V AC/DC |
Limiting continuous current |
6 A |
Maximum inrush current |
6 A |
Inrush current, minimum |
10 mA |
Sq. Total current |
144 A2 (Enabling current paths) |
36 A2 (Signaling current path) |
Switching capacity min. |
50 mW |
Switching capacity in accordance with IEC 60947-5-1 |
5 A (DC13) |
3 A (AC15) |
0.5 A (AC15) |
Output fuse |
10 A gL/gG (Enabling current paths) |
6 A gL/gG (Signaling current path) |
Thông số kết nối
Connection technology |
pluggable |
yes |
Conductor connection |
Connection method |
Screw connection |
Conductor cross section solid |
0.2 mm² ... 2.5 mm² |
Conductor cross section flexible |
0.2 mm² ... 2.5 mm² |
Conductor cross-section AWG |
24 ... 12 |
Stripping length |
7 mm |
Screw thread |
M3 |
Tightening torque |
0.5 Nm ... 0.6 Nm |
Kích thước
Width |
45 mm |
Height |
99 mm |
Depth |
114.5 mm |
Thông số cơ học
Housing material |
Polyamide |
Đặc trưng
Safety data |
Stop category |
0 |
Safety data: EN ISO 13849 |
Category |
4 |
Performance level (PL) |
e (3 A DC13; 3 A AC15; 8760 switching cycles/year) |
Safety data: IEC 61508 - High demand |
Equipment type |
Type A |
Safety Integrity Level (SIL) |
3 |
Probability of a hazardous failure per hour (PFHD) |
5.06 x 10-10 (3 A DC13; 3 A AC15; 8760 switching cycles/year) |
Proof test interval |
240 Months |
Duration of use |
240 Months |
Safety data: IEC 61508 - Low demand |
Designation |
The data is only valid if the demand rate is no more than once a year. |
Equipment type |
Type A |
Safety Integrity Level (SIL) |
3 |
Probability of a hazardous failure on demand (PFDAVG) |
1.48 x 10-4 |
Proof test interval |
77 Months |
Duration of use |
240 Months |
Điều kiện môi trường vận hành
Ambient conditions |
Degree of protection |
IP20 |
Min. degree of protection of inst. location |
IP54 |
Ambient temperature (operation) |
-20 °C ... 55 °C (observe derating) |
Ambient temperature (storage/transport) |
-40 °C ... 70 °C |
Maximum altitude |
≤ 2000 m (Above sea level) |
Max. permissible humidity (storage/transport) |
75 % (on average, 85% infrequently, non-condensing) |
Max. permissible relative humidity (operation) |
75 % (on average, 85% infrequently, non-condensing) |
Shock |
15g |
Vibration (operation) |
10 Hz ... 150 Hz, 2g |
Approval data
CE |
Certificate |
CE-compliant |
Quy-Chuẩn
Air clearances and creepage distances between the power circuits |
Standards/regulations |
DIN EN 60947-1 |
Lắp đặt
Mounting type |
DIN rail mounting |
Assembly instructions |
See derating curve |
Mounting position |
vertical or horizontal |
Thông số thương mại
Item number |
2963912 |
Packing unit |
1 pc |
Minimum order quantity |
1 pc |
Product Key |
DNA114 |
Catalog Page |
Page 229 (C-6-2019) |
GTIN |
4017918899707 |
Weight per Piece (including packing) |
423.99 g |
Weight per Piece (excluding packing) |
339.23 g |
Customs tariff number |
85371098 |
Country of origin |
DE |
- Tài liệu kỹ thuật Phoenix Contact PSR-SCP- 24UC/ESAM4/8X1/1X2 - 2963912
ở đây
Tham khảo thêm các model khác cùng loại:
Safety relays
PSR-SCP- 24UC/ESAM4/3X1/1X2/B - 2900509
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 3 enabling current paths, nominal input voltage: 24 V DC, plug-in screw terminal block
Safety relays
PSR-SCP- 24UC/ESL4/3X1/1X2/B - 2981059
Safety relay for emergency stop, safety door, and light grid monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, single- or two-channel operation, 3 enabling current paths, nominal input voltage: 24 V AC/DC, plug-in screw terminal blocks
Safety relays
PSR-SPP-24DC/ESD/5X1/1X2/300 - 2981431
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e (EN ISO 13849), one- or two-channel operation, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with dropout delay of 0.2 s ... 300 s, pluggable Push-in
Safety relays
PSR-SCP- 24DC/ESP4/2X1/1X2 - 2981020
Safety relay for SIL 3 high- and low-demand applications, also approved in accordance with EN 50156, Germanischer Lloyd, and EN ISO 13849, emergency stop and safety door monitoring, 1-channel, 2 enabling current paths, 1 signal contact, plug-in screw terminal
Safety relays
PSR-SPP- 24DC/SDC4/2X1/B - 2981499
Safety relay for emergency stop, safety door, and magnetic switches, as well as light grids, up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2 N/O contacts, TBUS interface, automatic or manual activation, pluggable Push-in terminal block
Safety relays
PSR-SCP- 24UC/ESA4/3X1/1X2/B - 2963763
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 3 enabling current paths, nominal input voltage: 24 V DC, plug-in screw terminal block
Safety relays
PSR-SCP- 24DC/ESD/4X1/30 - 2981800
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 2 N/O contacts with a dropout delay of 0.1 s ... 30 s, plug-in screw connection terminal block
Safety relays
PSR-SCP-24DC/ESD/5X1/1X2/300 - 2981428
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e (EN ISO 13849), one- or two-channel operation, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with dropout delay of 0.2 s ... 300 s, plug-in screw
Safety relays
PSR-SCP- 24UC/ESM4/2X1/1X2 - 2963718
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 2 enabling current paths, nominal input voltage: 24 V DC, plug-in screw terminal block
Safety relays
PSR-SCP-230AC/ESAM2/3X1/1X2/B - 2901430
Safety relay for emergency stop and safety door up to SIL 1, SIL CL 1, Cat. 1, PL c, depending on the application up to SIL 3, SIL CL 3, Cat. 4, PL e, single-channel operation, 3 enabling current paths, nominal input voltage of 230 V AC/DC, plug-in screw terminal blocks
Safety relays
PSR-SCP- 24UC/ESA2/4X1/1X2/B - 2963802
Safety relay for emergency stop and safety door up to SIL 1, SIL CL 1, Cat. 1, PL c, depending on the application up to SIL 3, SIL CL 3, Cat. 4, PL e, single-channel operation, 4 enabling current paths, US = 24 V AC/DC, plug-in screw terminal blocks
Safety relays
PSR-MC32-3NO-1NC-24-230UC-SC - 2700524
Safety relay for emergency stop, safety doors, and light grids up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, 3 enabling current paths, 1 signaling current path, US = 24 ... 230 V AC/DC, plug-in screw terminal block
Safety relays
PSR-SCP- 24UC/ESAM4/8X1/1X2 - 2963912
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 8 enabling current paths, US = 24 V DC, plug-in screw terminal block
DIN rail bus connectors
PSR-TBUS-TP - 2981716
Blind plug for the PSR-TBUS DIN rail connector used with the modular safety relay system (PSR-SDC4)
Safety relays
PSR-SCP- 24UC/THC4/2X1/1X2 - 2963721
Safety relay for two-hand control devices in accordance with ISO 13851 type IIIC to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, synchronous activation monitoring < 0.5 s, 2 N/O contacts, 1 N/C contact, safe isolation, width: 22.5 mm, pluggable
DIN rail bus connectors
PSR-TBUS - 2890425
DIN rail connector for safety switching devices, for supplying/controlling/monitoring (depending on the module)
Safety relays
PSR-SPP- 24UC/ESA2/4X1/1X2/B - 2963954
Safety relay for emergency stop and safety door up to SIL 1, SIL CL 1, Cat. 1, PL c, depending on the application up to SIL 3, SIL CL 3, Cat. 4, PL e, single-channel operation, 4 enabling current paths, US = 24 V AC/DC, pluggable Push-in terminal block
Safety relays
PSR-SCP- 24UC/ESM4/3X1/1X2/B - 2963776
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 3 enabling current paths, nominal input voltage: 24 V DC, plug-in screw terminal block
Safety relays
PSR-MS45-1NO-1DO-24DC-SC - 2904955
Safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, manual, monitored start, 1 enabling current path, US = 24 V DC, fixed screw terminal block
Safety relays
PSR-SPP- 24DC/ESP4/2X1/1X2 - 2981017
Safety relay for SIL 3 high and low-demand applications, also approved in accordance with EN 50156, Germanischer Lloyd, and EN ISO 13849, emergency stop and safety door monitoring, 1-channel, 2 enabling current paths, 1 signal contact, width: 22.5 mm, pluggable Push-in terminal block
Safety relays
PSR-SPP-24UC/ESAM4/8X1/1X2 - 2963996
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, single- or two-channel operation, 8 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-MS20-1NO-1DO-24DC-SC - 2904950
Safety relay for emergency stop and safety doors up to SIL 1, Cat. 1, PL c, depending on the application up to SIL 3, Cat. 4, PL e, 1-channel operation, automatic start, 1 enabling current path, US = 24 V DC, fixed screw terminal block
Extension module
PSR-MC82-5NO-1NC-1DO-24DC-SC - 2702382
Contact extension up to SIL 3, Cat. 4, PL e in conjunction with suitable evaluation device, 5 enabling current paths, US = 24 V DC, plug-in screw terminal block
Safety relays
PSR-MC30-2NO-1DO-24DC-SC - 2700498
Safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, cross-circuit detection, 2 enabling current paths, US = 24 V DC, plug-in screw terminal block
Safety relays
PSR-SCP- 24UC/ESA4/2X1/1X2 - 2963750
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 2 enabling current paths, nominal input voltage: 24 V DC, plug-in screw terminal block
Extension module
PSR-MC82-5NO-1NC-1DO-24DC-SP - 2702383
Contact extension up to SIL 3, Cat. 4, PL e in conjunction with suitable evaluation device, 5 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-SCP-230UC/ESAM4/3X1/1X2/B - 2901428
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 3 enabling current paths, nominal input voltage: 230 V AC/DC, plug-in screw terminal blocks
Safety relays
PSR-MC32-3NO-1NC-24-230UC-SP - 2700525
Safety relay for emergency stop, safety doors and light grids up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, 3 enabling current paths, 1 signaling current path, US = 24 ... 230 V AC/DC, pluggable Push-in terminal block
Safety relays
PSR-ME20-3NO-1NC-24DC-SC - 1301402
Safety relay for emergency stops, safety doors, and light grids up to SIL 2, Cat. 3, PL d, 1- or 2-channel operation, automatic or manual, monitored start, 3 enabling current paths, 1 signaling current path, US = 24 V DC, plug-in screw terminal block
Safety relays
PSR-SCP- 24UC/ESAM4/2X1/1X2 - 2900525
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 2 enabling current paths, nominal input voltage: 24 V DC, plug-in screw terminal block
Safety relays
PSR-MC30-2NO-1DO-24DC-SP - 2700499
Safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, 1- or 2-channel operation, automatic or manual, monitored start, cross-circuit detection, 2 enabling current paths, US = 24 V DC, plug-in Push-in terminal block
DIN rail bus connectors
ME 22,5 TBUS 1,5/ 5-ST-3,81 YE - 1PCS - 1225375
DIN rail connector, nominal current: 8 A (parallel contacts), rated voltage (III/2): 125 V, number of positions: 5, pitch: 3.81 mm, color: yellow, mounting: DIN rail, item with gold-plated contacts, bus connector for connecting to electronics housings, 5 parallel contacts
Safety relays
PSR-SPP-230AC/ESAM2/3X1/1X2/B - 2901431
Safety relay for emergency stop and safety door up to SIL 1, SIL CL 1, Cat. 1, PL c, depending on the application up to SIL 3, SIL CL 3, Cat. 4, PL e, single-channel operation, 3 enabling current paths, nominal input voltage of 230 V AC/DC, pluggable Push-in terminal block
Safety relays
PSR-SPP- 24UC/ESAM4/2X1/1X2 - 2900526
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 2 enabling current paths, nominal input voltage: 24 V DC, plug-in Push-in terminal block
Safety relays
PSR-SPP- 24UC/ESL4/3X1/1X2/B - 2981062
Safety relay for emergency stop, safety door, and light grid monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 3 enabling current paths, nominal input voltage: 24 V AC/DC, plug-in Push-in terminal block
Safety relays
PSR-SPP- 24DC/ESD/4X1/30 - 2981813
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 2 N/O contacts with a fixed dropout delay of 0.1 s ... 30 s, pluggable Push-in terminal block
Safety relays
PSR-MC50-3NO-1DO-24DC-SC - 2700553
Safety relay for monitoring non-equivalent signal generators up to SIL 3, Cat. 4, PL e, 2-channel, non-equivalent operation, automatic or manual, monitored start, 3 enabling current paths, US = 24 V DC, plug-in screw terminal block
Safety relays
PSR-MS60-2NO-24DC-SC - 2904958
Safety relay for emergency stop, safety doors, and light grids up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic start, 2 enabling current paths (1-channel), US = 24 V DC, fixed screw terminal block
Safety relays
PSR-SCP-24DC/ESD/4X1/30-SET35 - 1217839
Set of 35 safety relays for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 2 N/O contacts with a dropout delay of 0.1 s to 30 s, plug-in screw connection terminal block
Safety relays
PSR-MC37-3NO-1NC-24DC-SC - 2702411
Safety relay for emergency switching off and safety doors as well as for elevator applications up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual start, cross-circuit detection, 3 enabling current paths, US = 24 V DC, plug-in screw terminal block
Safety relays
PSR-MS55-1NO-1DO-24DC-SC - 2904957
Safety relay for monitoring non-equivalent signal generators up to SIL 3, Cat. 4, PL e, 2-channel, non-equivalent operation, manual, monitored start, 1 enabling current path, US = 24 V DC, fixed screw terminal block
Safety relays
PSR-MC42-2NO-1DO-24DC-SP - 2702902
Safety relay with IO-Link for emergency stop, safety doors and light grids, up to SIL 3, Cat. 4, PL e, 2 sensor circuits, automatic or manual, monitored start, 2 enabling current paths, 1 signal output, US = 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-MS30-1NO-24DC-SC - 2904952
Safety relay for emergency stop and safety doors up to SILCLSIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic start, cross-circuit detection, 1 enabling current path, US = 24 V DC, fixed screw terminal block
Safety relays
PSR-MC72-2NO-1DO-24DC-SP - 2702097
Safety relay for emergency stop, safety doors, light grid up to SIL 3, Cat. 4, PL e, 1- or 2-channel operation, cross-circuit detection, can be retriggered, fall back/on delay 0.2 s ... 60 s, 2 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-MC37-3NO-1NC-24DC-SP - 2702412
Safety relay for emergency switching off and safety doors as well as for elevator applications up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual start, cross-circuit detection, 3 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-MS35-1NO-24DC-SC - 2904953
Safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, manual, monitored start, cross-circuit detection, 1 enabling current path, US = 24 V DC, fixed screw terminal block
Safety relays
PSR-SPP- 24UC/ESA4/3X1/1X2/B - 2963941
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 3 enabling current paths, nominal input voltage: 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-MC45-3NO-1DO-24DC-SP - 1082029
Safety relay for emergency stop, safety doors and light grids up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, 3 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-MS25-1NO-1DO-24DC-SC - 2904951
Safety relay for emergency stop and safety doors up to SIL 1, Cat. 1, PL c, depending on the application up to SIL 3, Cat. 4, PL e, 1-channel operation, manual, monitored start, 1 enabling current path, US = 24 V DC, fixed screw terminal block
Safety relays
PSR-SPP- 24DC/ESD/5X1/1X2/T10S - 2981509
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 10 s, pluggable Push-in terminal block
Safety relays
PSR-MC40-3NO-1DO-24DC-SC - 2700569
Safety relay for emergency stop, safety doors, and light grids up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, 3 enabling current paths, US = 24 V DC, plug-in screw terminal block
Safety relays
PSR-SPP- 24UC/ESM4/2X1/1X2 - 2963705
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 2 enabling current paths, nominal input voltage: 24 V DC, plug-in Push-in terminal block
Safety relays
PSR-MC38-2NO-1DO-24DC-PI - 1009832
Safety relay for emergency stop, safety doors and light grids up to SIL 3, Cat. 4, PL e, 1- or 2-channel operation, automatic or manual, monitored start, 2 enabling current paths, 1 signal output, TBUS interface, US = 24 V DC, pluggable push-in terminal
Filter terminal block
PSR-FTB/1.5/11.5 - 2904476
Terminal block for filtering test pulses from safe semiconductor outputs with adjustable filter values (1.5 µF/11.5 µF), as well as for EMC filtering of 24 V signals up to an amperage of 2 A.
Safety relays
PSR-MC50-3NO-1DO-24DC-SP - 2700564
Safety relay for monitoring non-equivalent signal generators up to SIL 3, Cat. 4, PL e, 2-channel, non-equivalent operation, automatic or manual, monitored start, 3 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-MS40-1NO-1DO-24DC-SC - 2904954
Safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic start, 1 enabling current path, US = 24 V DC, fixed screw terminal block
Safety relays
PSR-MS21-1NO-1DO-24DC-SC - 2702192
Safety relay for failsafe controllers up to SILCL 3, Cat. 4, PL e, 1-channel operation, autostart, 1 enabling current path, US = 24 V DC in accordance with IEC 61131-6, fixed screw terminal block
Safety relays
PSR-SPP- 24UC/ESM4/3X1/1X2/B - 2963925
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 3 enabling current paths, nominal input voltage: 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-SPP-230UC/ESAM4/3X1/1X2/B - 2901429
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 3 enabling current paths, nominal input voltage: 230 V AC/DC, pluggable Push-in terminal block
Safety device
PSR-MC43-2SDO-1DO-24DC-SC - 1087561
Safety relay module with IO-Link for emergency stop, safety doors, and light grids, to SIL 3, cat. 4, PL e, 2 sensor circuits, automatic or manual, monitored start, 2 safe digital outputs, 1 signal output, US = 24 V DC, pluggable screw terminal block
Safety relays
PSR-MC70-2NO-1DO-24DC-SP - 2702095
Safety relay for emergency stop, safety doors, light grid up to SIL 1, Cat. 1, PL e, 1- or 2-channel operation, cross-circuit detection, can be retriggered, fall back/on delay 0.2 s ... 60 s, 2 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-MC73-5NO-1DO-24DC-SC - 1015533
Safety relay for emergency stop, safety doors, light grids up to SIL 3, Cat. 4, PL e, 1- or 2-channel operation, cross-circuit detection, can be retriggered, off-/on delay of 0.2 s to 300 s, 5 enabling current paths, US = 24 V DC, plug-in screw terminal block
DIN rail bus connectors
PSR-TBUS - 1PCS - 1326060
DIN rail connector for safety switching devices, for supplying/controlling/monitoring (depending on the module)
Safety relays
PSR-MC40-3NO-1DO-24DC-SP - 2700570
Safety relay for emergency stop, safety doors and light grids up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, 3 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-MC38-2NO-1DO-24DC-SC - 1009831
Safety relay for emergency stop, safety doors and light grids up to SIL 3, Cat. 4, PL e, 1- or 2-channel operation, automatic or manual, monitored start, 2 enabling current paths, 1 signal output, TBUS interface, US = 24 V DC, pluggable screw terminal block
Safety relays
PSR-MC45-3NO-1DO-24DC-SC - 1082024
Safety relay for emergency stop, safety doors, and light grids up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, 3 enabling current paths, US = 24 V DC, plug-in screw terminal block
Safety relays
PSR-MC34-3NO-1DO-24DC-SC - 2700540
Safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, cross-circuit detection, 3 enabling current paths, US = 24 V DC, plug-in screw terminal block
Safety device
PSR-MC31-2SDO-1DO-24DC-SP - 1015503
Safety relay module for safety shut-off mats, switching strips, emergency stop, safety doors, and light grids up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual start, 2 safe HL outputs, 1 signal output, US = 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-MC20-3NO-1DO-24DC-SC - 2700466
Safety relay for emergency stop and safety doors up to SIL 1, Cat. 1, PL c, depending on the application up to SIL 3, Cat. 4, PL e, 1-channel operation, automatic/manual start, 3 enabling current paths, US = 24 V DC, plug-in screw terminal block
Safety device
PSR-MC31-2SDO-1DO-24DC-SC - 1015520
Safety relay module for safety shut-off mats, switching strips, emergency stop, safety doors, and light grids up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual start, 2 safe HL outputs, 1 signal output, US = 24 V DC, plug-in screw terminal block
Safety relays
PSR-MC34-3NO-1DO-24DC-SP - 2700548
Safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, cross-circuit detection, 3 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-SPP- 24UC/ESA4/2X1/1X2 - 2963938
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 2 enabling current paths, nominal input voltage: 24 V DC, plug-in Push-in terminal block
Safety relays
PSR-SPP- 24DC/SIM4 - 2981949
Interface module for connecting several safety sensors or switches with N/C / N/O contacts to the PSR-SDC4 safety relay, plug-in Push-in terminal blocks
Filter terminal block
PSR-FTB/20/86 - 2904477
Terminal block for filtering test pulses from safe semiconductor outputs with adjustable filter values (20 µF/86 µF), as well as for EMC filtering of 24 V signals up to an amperage of 2 A.
Safety relays
PSR-SPP- 24UC/ESAM4/3X1/1X2/B - 2900510
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 3 enabling current paths, nominal input voltage: 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-SCP- 24DC/SDC4/2X1/B - 2981486
Safety relay for emergency stop, safety door, and solenoid switches and for light grids, up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2 N/O contacts, TBUS interface, automatic or manual activation, plug-in screw connection terminal blocks
Safety relays
PSR-MC72-2NO-1DO-24DC-SC - 2702096
Safety relay for emergency stop, safety doors, light grid up to SIL 3, Cat. 4, PL e, 1- or 2-channel operation, cross-circuit detection, can be retriggered, fall back/tightening delay 0.2 s ... 60 s, 2 enabling current paths, US = 24 V DC, plug-in screw terminal block
Safety relays
PSR-SPP- 24UC/THC4/2X1/1X2 - 2963983
Safety relay for two-hand control devices in accordance with ISO 13851 type IIIC to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, synchronous activation monitoring < 0.5 s, 2 N/O contacts, 1 N/C contact, safe isolation, width: 22.5 mm, pluggable Push-in terminal block
Safety relays
PSR-SCP- 24DC/SIM4 - 2981936
Interface module for the connection of several safety sensors or switches with NC/NO contacts to the safety relay PSR-SDC4, with screw connection
Safety relays
PSR-MC70-2NO-1DO-24DC-SC - 2702094
Safety relay for emergency stop, safety doors, light grid up to SIL 1, Cat. 1, PL c, 1- or 2-channel operation, cross-circuit detection, can be retriggered, off delay/on delay 0.2 s ... 60 s, 2 enabling current paths, US = 24 V DC, plug-in screw terminal block
Safety relays
PSR-MC42-2NO-1DO-24DC-SC - 2702901
Safety relay with IO-Link for emergency stop, safety doors, and light grids, up to SIL 3, Cat. 4, PL e, 2 sensor circuits, automatic or manual, monitored start, 2 enabling current paths, 1 signal output, US = 24 V DC, plug-in screw terminal block
Safety relays
PSR-MC73-5NO-1DO-24DC-SP - 1015526
Safety relay for emergency stop, safety doors, light grids up to SIL 3, Cat. 4, PL e, 1- or 2-channel operation, cross-circuit detection, can be retriggered, off-/on delay of 0.2 s to 300 s, 5 enabling current paths, US = 24 V DC, plug-in Push-in terminal block
Safety relays
PSR-ME20-3NO-1NC-24DC-SC-SET35 - 1301404
Set comprised of 35 safety relays for emergency stops, safety doors, and light grids up to SIL 2, Cat. 3, PL d, 1- or 2-channel operation, automatic or manual, monitored start, 3 enabling current paths, 1 signaling current path, US = 24 V DC, plug-in screw terminal block
Safety relays
PSR-MC20-3NO-1DO-24DC-SP - 2700467
Safety relay for emergency stop / safety doors up to SIL 1, Cat. 1, PL c, depending on the application up to SIL 3, Cat. 4, PL e, 1-channel operation, automatic / manual start, 3 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
Safety device
PSR-MC43-2SDO-1DO-24DC-SP - 1087569
Safety relay module with IO-Link for emergency stop, safety doors, and light grids, to SIL 3, Cat. 4, PL e, 2 sensor circuits, automatic or manual, monitored start, 2 safe digital outputs, 1 signal output, US = 24 V DC, pluggable Push-in terminal block
Safety relays
PSR-MS50-1NO-1DO-24DC-SC - 2904956
Safety relay for monitoring non-equivalent signal generators up to SIL 3, Cat. 4, PL e, 2-channel, non-equivalent operation, automatic start, 1 enabling current path, US = 24 V DC, fixed screw terminal block
Safety relays
PSR-SCP-42-48UC/ESAM4/3X1/1X2B - 2901416
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 3 enabling current paths, nominal input voltage: 42 V AC/DC ... 48 V AC/DC, plug-in screw terminal blocks
Safety relays
PSR-SPP-42-48UC/ESAM4/3X1/1X2B - 2901417
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 3 enabling current paths, nominal input voltage: 42 V AC/DC ... 48 V AC/DC, plug-in Push-in terminal block
Coupling relay
PSR-SCF- 24UC/URM/2X21 - 2981363
Safe coupling relay with force-guided contacts, 2 changeover contacts, 1-channel, fixed screw terminal block, width: 17.5 mm
Coupling relay
PSR-SCP- 24DC/FSP/1X1/1X2 - 2981978
Safe coupling relay for SIL 3 high- and low-demand applications, couples digital output signals to the periphery, one enabling current path, one signal contact, module for safe state off applications, test pulse filter, fuse, plug-in screw connection, width: 17.5 mm
Extension module
PSR-SPP- 24DC/URD3/4X1/2X2/3 - 2981745
1-channel contact extension with TBUS interface, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, the contacts have an off-delay (0.3 ... 3 s), Cat. 3, PL e in accordance with EN ISO 13849, width: 22.5 mm, pluggable Push-in terminal block
Safety relays
PSR-SCP- 24DC/FSP/2X1/1X2 - 2986960
Safe coupling relay for SIL 3 high- and low-demand applications, couples digital output signals to the periphery, two enabling current paths, one signal contact, module for safe state off applications, integrated test pulse filter, plug-in screw connection, width: 17.5 mm
Coupling relay
PSR-SCP- 24DC/FSP2/2X1/1X2 - 2986575
Safe coupling relay for SIL 2 high- and low-demand applications, couples digital output signals to the periphery, two enabling current paths, one signal contact, module for safe state off applications, integrated test pulse filter, plug-in screw connection, width: 17.5 mm
Coupling relay
PSR-PS20-1NO-1NC-24DC-SC - 2700356
Coupling relay for SIL 3 high and low-demand applications, couples digital output signals to the I/O, 1 enabling current path, 1 confirmation current path, 1 digital signal output, safe state off applications, test pulse filter, fixed screw terminal block
Extension module
PSR-SCP- 24UC/URM4/5X1/2X2/B - 2981033
Single or two-channel contact extension, 5 N/O contacts, 1 N/C contact, 1 confirmation current path, plug-in screw terminal blocks, width: 22.5 mm
Extension module
PSR-SPP- 24UC/URM4/5X1/2X2/B - 2981046
Single or two-channel contact extension, 5 N/O contacts, 1 N/C contact, 1 confirmation current path, width: 22.5 mm, pluggable Push-in terminal block
Coupling relay
PSR-SCP- 24UC/URM/5X1/2X2 - 2963747
Safe coupling relay with force-guided contacts, 5 N/O contacts, 2 N/C contacts, 1-channel, plug-in screw terminal block, width: 22.5 mm
Extension module
PSR-SCP- 24UC/URM4/5X1/2X2 - 2963734
Single-channel or two-channel contact extension, 5 N/O contacts, 1 N/C contact, 1 confirmation current path, together with basic device up to Cat. 4 PL e in accordance with EN ISO 13849 safe isolation, width: 35 mm, pluggable screw terminal block
Coupling relay
PSR-PS21-1NO-1NC-24DC-SC - 2700357
Coupling relay for SIL 2 high- and low-demand applications, couples digital output signals to the I/O, 1 enabling current path, 1 confirmation current path, 1 digital signal output, safe state off applications, test pulse filter, fixed screw terminal block
Coupling relay
PSR-SPP- 24DC/FSP/1X1/1X2 - 2981981
Safe coupling relay for SIL 3 high- and low-demand applications, couples digital output signals to the periphery, one enabling current path, one signal contact, module for safe state off applications, test pulse filter, fuse, plug-in Push-in connection, width: 17.5 mm
Coupling relay
PSR-SCF- 24UC/URM/4X1/2X2 - 2981444
Safe coupling relay with force-guided contacts, 4 N/O contacts, 2 N/C contacts, fixed screw terminal block, width: 40 mm
Coupling relay
PSR-PS22-1NO-1NC-24VDC-SC - 2702524
Coupling relay for SIL 3 high and low-demand applications, couples digital output signals to the I/O, 1 enabling current path, 1 confirmation current path, safe state off applications, test pulse filter, fixed screw terminal block
Extension module
PSR-SCP-24DC/URML4/3X1/1X2/B - 2903583
Single- or two-channel contact extension for OSSD signals (e.g., light grid), 3 N/O contacts, 1 N/C contact, up to Cat. 4 PL e in accordance with EN ISO 13849, SIL 3 in accordance with EN 62061, plug-in screw terminal blocks, width: 22.5 mm
Coupling relay
PSR-PC50-1NO-1DO-24DC-SC - 2904664
Coupling relay for SIL 3 low demand applications, couples digital output signals to the periphery, 1 enabling current path, module for F&G applications, test pulse filter, plug-in screw connection, 17.5 mm width
Coupling relay
PSR-SPF-24UC/URM/4X1/2X2 - 2981457
Safe coupling relay with force-guided contacts, 4 N/O contacts, 2 N/C contacts, fixed spring-cage terminal block, width: 40 mm
Coupling relay
PSR-SPP- 24UC/URM/5X1/2X2 - 2963970
Safe coupling relay with force-guided contacts, 5 N/O contacts, 2 N/C contacts, 1-channel, width: 22.5 mm, pluggable Push-in terminal block
Coupling relay
PSR-SPP- 24DC/FSP/2X1/1X2 - 2986957
Safe coupling relay for SIL 3 high and low demand applications, coupled digital output signals to the I/O, 2 enabling current paths, 1 signal contact, module for safe state off applications, integrated test pulse filter, width: 17.5 mm, pluggable Push-in terminal block
Coupling relay
PSR-PE20-1NO-24DC-SC - 1119573
Coupling relay for SIL 3 low-demand applications, couples digital output signals to the I/O, 1 independently controllable enabling current path, safe state off applications, test pulse filter, plug-in screw terminal block
Coupling relay
PSR-PS23-1NO-1NC-24VDC-SC - 2702663
Coupling relay for SIL 3 high and low-demand applications, couples digital output signals to the I/O, 1 enabling current path, 1 confirmation current path, safe state off applications, test pulse filter, fixed screw terminal block
Coupling relay
PSR-PC40-2NO-1DO-24DC-SP - 2700589
Coupling relay for SIL 3 high and low-demand applications, couples digital output signals to the I/O, 2 enabling current paths, 1 digital signal output, safe state off applications, test pulse filter, pluggable Push-in terminal block
Coupling relay
PSR-SPP- 24UC/URM/5X1/1X2 - 2981965
Safe coupling relay with force-guided contacts, 5 N/O contacts, 1 N/C contact, width: 22.5 mm, pluggable Push-in terminal block
Extension module
PSR-SCP- 24DC/URM4/4X1/2X2/B - 2981677
1-channel contact extension with TBUS interface, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, undelayed, Cat. 4, PL e in accordance with EN ISO 13849, plug-in screw terminal blocks, width: 22.5 mm
Coupling relay
PSR-PC21-2NO-2NC-24DC-SP - 1086946
Coupling relay for SIL 3 high and low-demand applications, coupled digital output signals to the I/O, 2 independently controllable enabling current paths, 2 confirmation current paths, safe state off applications, test pulse filter, pluggable Push-in terminal block
Extension module
PSR-SPP-24DC/URML4/3X1/1X2/B - 2903584
One or two-channel contact extension for OSSD signals (e.g., light grid), 3 N/O contacts, 1 N/C contact, up to Cat. 4 PL e in accordance with EN ISO 13849, SIL 3 in accordance with EN 62061, pluggabl