Type | MOS 24VDC/5-33VDC 10A |
Order No. | 8937940000 |
Version | MICROOPTO, solid-state relais, 1 NO contact (POWER MOS-FET), Rated control voltage: 24 V DC ±20 % , Rated switching voltage: 5...33 V DC, Continuous current: 10 A, Screw connection |
GTIN (EAN) | 4032248716173 |
Qty. | 1 pc(s). |
Availability | Stock article |
Width | 6.1 mm |
Width (inches) | 0.24 inch |
Height | 88.1 mm |
Height (inches) | 3.468 inch |
Depth | 97.8 mm |
Depth (inches) | 3.85 inch |
Net weight | 38.81 g |
Humidity | 5 - 93% rel. humidity, Tu = 40°C, no condensation |
Operating temperature, max. | 60 °C |
Operating temperature, min. | -25 °C |
Storage temperature, max. | 60 °C |
Storage temperature, min. | -40 °C |
Operating temperature | -25 °C...60 °C |
Storage temperature | -40 °C...60 °C |
MTTF | 399 Years |
REACH SVHC | Lead 7439-92-1 |
Rated control voltage | 24 V DC ±20 % |
Power rating | 400 mW |
Cut-in / dropout voltage | 18 V / 13 V DC |
Status indicator | Green LED |
Protective circuit | Varistor, Reverse polarity protection |
Rated switching voltage | 5...33 V DC |
Continuous current | 10 A |
Rated switching current | 10 A |
Load category | LC A |
Pulse load, max. current | ≤ 11 A (≤ 200 µs) |
Switch-on delay | typical. 250 µs |
Switch-off delay | typical. 700 µs |
Voltage drop at max. load | approx. 100 mV |
Leakage current | < 1 mA |
Min. switching current | 10 mA |
Short-circuit-proof | Yes (limited for 4 h / current limitation external < 200 A) |
Load side status indicator | LED red, short-circuit /overload at the output |
Protective circuit, load side | Current sensor, Varistor, Free-wheel diode |
max. switching frequency (DC control voltage) | 50 Hz |
Solid-state type | Bipolar transistor |
Nominal switching voltage | 24 VDC ±20% |
Continuous current | 50 mA |
Switch-off delay | 5 s |
Contact type | 1 NO contact (POWER MOS-FET) |
Mounting rail | TS 35 |
Colour | Black |
UL 94 flammability rating | V-0 |
Rated voltage | 300 V |
Pollution severity | 2 |
Surge voltage category | III |
Clearance and creepage distances for control side - load side | > 3 mm |
Dielectric strength for control side - load side | 3 KVeff / 1 min. |
Dielectric strength to mounting rail | 4 kVeff / 1 min. |
Impulse withstand voltage | 4 kV (1.2/50 µs) |
Protection degree | IP20 |
Standards | DIN EN 50178, GL 2003-Vl-Abs. 9, IEC 62314, UL508 |
Certificate No. (GERMLLOYD) | 54853-08 |
Certificate no. (cULus) | E141197 |
Wire connection method | Screw connection |
Stripping length, rated connection | 7 mm |
Tightening torque, min. | 0.4 Nm |
Tightening torque, max. | 0.6 Nm |
Clamping range, rated connection | 2.5 mm² |
Clamping range, min. | 0.5 mm² |
Clamping range, max. | 4 mm² |
Wire cross-section, solid, min. | 0.5 mm² |
Wire cross-section, solid, max. | 4 mm² |
Wire connection cross-section, finely stranded, min. | 0.5 mm² |
Wire connection cross section, finely stranded, max. | 2.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 0.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 1.5 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), min. | 0.5 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), max. | 1.5 mm² |
Blade size | 0.6 x 3.5 mm |
Product information | The cable lengths must not exceed 30 m. |
Descriptive text technical data | Suppressor circuitry for inductive loads, 10 cm installation clearance to inductive switching devices. |
Instructions for accessories | Accessories and dimensioned drawings: refer to the MICROOPTO Accessories page. |
ETIM 3.0 | EC001504 |
ETIM 4.0 | EC001504 |
ETIM 5.0 | EC001504 |
ETIM 6.0 | EC001504 |
UNSPSC | 30-21-18-01 |
eClass 5.1 | 27-27-09-90 |
eClass 6.2 | 27-27-09-90 |
eClass 7.1 | 27-27-09-90 |
eClass 8.1 | 27-27-09-90 |
eClass 9.0 | 27-27-09-90 |
eClass 9.1 | 27-37-16-04 |
Approvals | |
ROHS | Conform |
UL File Number Search | E141197 |