MAIN | |
---|---|
Range of product | OsiSense XM |
Product or component type | Electromechanical pressure sensor |
Pressure sensor type | Electromechanical pressure sensor |
Device short name | XMLA |
Pressure rating | 300 bar |
Controlled fluid | Hydraulic oil (0…160 °C) |
Fluid connection type | G 1/4 (female) conforming to ISO 228 |
Electrical connection | Screw-clamps terminals, 1 x 0.5...2 x 2.5 mm² 1 connector Pg 13 |
AWG gauge | AWG 20...AWG 14 |
Cable entry | Cable gland 9…13 mm |
Contacts type and composition | 1 C/O |
Product specific application | - |
Pressure switch type of operation | Detection of 1 single threshold |
Electrical circuit type | Control circuit |
Scale type | Fixed differential |
Local display | With |
Adjustable range of switching point on rising pressure | 20…300 bar |
Adjustable range of switching point on falling pressure | 3.5…265 bar |
Maximum permissible accidental pressure | 675 bar |
Destruction pressure | 1350 bar |
Pressure actuator | Piston |
Materials in contact with fluid | Steel Brass PTFE FPM, FKM |
Enclosure material | Zinc alloy |
[In] rated current | 3 A, B300, AC-15 (Ue = 120 V) conforming to EN/IEC 60947-5-1 1.5 A, B300, AC-15 (Ue = 240 V) conforming to EN/IEC 60947-5-1 0.1 A, R300, DC-13 (Ue = 250 V) conforming to EN/IEC 60947-5-1 |
COMPLEMENTARY | |
Natural differential at low setting | 16.5 bar (+/- 3 bar) |
Natural differential at high setting | 35 bar (+/- 6 bar) |
Maximum permissible pressure - per cycle | 375 bar |
Terminal block type | 4 terminals |
Maximum operating rate | 60 cyc/mn |
Repeat accuracy | 2 % |
[Ui] rated insulation voltage | 300 V conforming to UL 508 500 V conforming to EN/IEC 60947-1 300 V conforming to CSA C22.2 No 14 |
[Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-1 |
Auxiliary contacts operation | Snap action |
Contacts material | Silver contacts |
Maximum resistance across terminals | 25 mOhm conforming to IEC 255-7 category 3 25 mOhm conforming to NF C 93-050 method A |
Short-circuit protection | 10 A cartridge fuse, type gG (gl) |
Mechanical durability | 3000000 cycles |
Setting | External |
Height | 113 mm |
Depth | 75 mm |
Width | 35 mm |
Product weight | 0.75 kg |
ENVIRONMENT | |
Standards | UL 508 IEC 60947-5-1 CSA C22.2 No 14 CE EN/IEC 60947-5-1 EN 60947-5-1 |
Product certifications | UL CSA BV LROS (Lloyds register of shipping) CCC EAC |
Protective treatment | TC standard version |
Ambient air temperature for operation | -25…70 °C |
Ambient air temperature for storage | -40…70 °C |
Operating position | Any position |
Vibration resistance | 4 gn conforming to IEC 60068-2-6 (f = 30…500 Hz) |
Shock resistance | 50 gn conforming to IEC 60068-2-27 |
Electrical shock protection class | Class I conforming to IEC 1140 Class I conforming to IEC 536 Class I conforming to NF C 20-030 |
IP degree of protection | IP66 conforming to EN/IEC 60529 |
PACKING UNITS | |
Unit Type of Package 1 | PCE |
Number of Units in Package 1 | 1 |
Package 1 Weight | 749 g |
Package 1 Height | 4 cm |
Package 1 width | 8.5 cm |
Package 1 Length | 12.2 cm |
Unit Type of Package 2 | S02 |
Number of Units in Package 2 | 13 |
Package 2 Weight | 9.981 kg |
Package 2 Height | 15 cm |
Package 2 width | 30 cm |
Package 2 Length | 40 cm |
OFFER SUSTAINABILITY | |
Sustainable offer status | Green Premium product |
REACh Regulation | REACh Declaration |
EU RoHS Directive | EU RoHS Declaration |
Mercury free | Yes |
RoHS exemption information | Yes |
Environmental Disclosure | Product Environmental Profile |
California proposition 65 | WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
CONTRACTUAL WARRANTY | |
Warranty | 18 months |