Bộ lưu điện UPS 1AC 24DC 5A Phoenix Contact TRIO-UPS-2G/1AC/24DC/5 - 2907160

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Tất cả các Model Bộ lưu điện UPS DC của Phoenix Contact

• 

  Tất cả các model Lưu điện DC UPS Siemens | SITOP DC UPS uninterruptible power supplies

• Xem thêm

Bộ lưu điện UPS 1AC 24DC 5A Phoenix Contact TRIO-UPS-2G/1AC/24DC/5 - 2907160

TRIO UPS - UPS with integrated power supply, USB (Modbus/RTU), DIN rail mounting, Push-in connection, input: 1-phase, output: 24 V DC / 5 A
 

 

Product description

Supply DC loads reliably and save space with the TRIO uninterruptible power supplies. An input grid is no longer necessary for startup. Connected industrial PCs can be shut down easily via the integrated USB interface.

 

Technical data

Input data

Input voltage range	100 V AC ... 240 V AC -15 % ... +10 %
Voltage type of supply voltage	AC
Inrush current	< 16 A
Inrush current integral (I2t)	< 0.43 A2s
Frequency range (fN)	50 Hz ... 60 Hz (±10 %)
Mains buffering time	≥ 15 ms (120 V AC)
Switch-on time	typ. 60 ms
Typical current consumption	3.3 A (100 V AC)
Input fuse	6.3 A (slow-blow, internal)
Signal Bat.-Start
Connection labeling	3.6
Signalization designation	Bat.-Start
Low signal	Connection to SGnd with < 2.7 kΩ
High signal	Open (> 200 kΩ between Bat.-Start and SGnd)
Signal Remote
Connection labeling	3.5
Signalization designation	Remote
Low signal	Connection to SGnd with < 2.7 kΩ
High signal	Open (> 35 kΩ between Remote and SGnd)

 

Output data

Efficiency	typ. 85 % (120 V AC)
	typ. 87 % (230 V AC)
	typ. 96 % (Battery operation)
Derating	> 60 °C (2.5%/K of POut nom.)
Crest factor	2.7 (120 V AC)
	3.2 (230 V AC)
Switch-over time	< 75 ms
UPS connection in parallel	yes, with diode module uncoupled
UPS connection in series	no
Energy storage device connection in parallel	yes
Feedback voltage resistance	≤ 35 V DC
Protection against overvoltage at the output (OVP)	< 30 V DC
Residual ripple	< 20 mV
Control deviation	< 0.75 % (change in load, static 10 % ... 90 %)
	< 1.25 % (Dynamic load change 10 % ... 90 %, 10 Hz)
	< 0.1 % (change in input voltage ±10 %)
Rise time	< 15 ms
Permissible backup fuse	B10
Mains operation
Output voltage	24 V DC
Output voltage range	24 V DC ... 28 V DC (> 24 V constant capacity)
Output current IN	5 A
Dynamic Boost (IDyn.Boost)	7.5 A
Output power POUT (UN, IOUT = IN)	120 W
Maximum no-load power dissipation	< 3 W (230 V AC)
Power loss nominal load max.	< 19 W (230 V AC)
Battery operation
Output voltage	UBAT -0.1 V DC
Output voltage range	18 V DC ... 30 V DC
Output current IN	5 A
Dynamic Boost (IDyn.Boost)	7.5 A
Signal Alarm
Connection labeling	3.2
Signalization designation	Alarm
Type of signaling	LED red
Switching output	Transistor output, active
Output voltage	24 V DC
Continuous load current	20 mA
LED status indicator	red
Signal Battery mode
Connection labeling	3.3
Signalization designation	Battery mode
Type of signaling	Yellow LED
Switching output	Transistor output, active
Output voltage	24 V DC
Continuous load current	20 mA
LED status indicator	yellow
Signal DC OK
Connection labeling	3.1
Signalization designation	DC OK
Type of signaling	Green LED
Switching output	Transistor output, active
Output voltage	24 V DC
Continuous load current	20 mA
LED status indicator	green
Signal Ready
Connection labeling	3.4
Signalization designation	Ready
Switching output	Transistor output, active
Output voltage	24 V DC
Continuous load current	20 mA
Signal supply 24 V DC, 20 mA, SGnd
Connection labeling	3.7

 

Energy storage

Nominal voltage UN	24 V DC
End-of-charge voltage	max. 30 V DC
Charging current (Configurable)	0.2 A ... 1.5 A (-25 °C ... 40 °C)
Charging current (Reduced)	1.5 A ... 0 A (40 °C ... 65 °C)
Charging current (Preset)	1.2 A (-25 °C ... 40 °C)
Charging current ()	1.5 A
Nominal capacity range	1.2 Ah ... 12 Ah
Battery technology	VRLA-AGM
Charge characteristic curve	IU0U

 

Connection data

Conductor connection
Connection method	Push-in connection
rigid	0.2 mm² ... 4 mm²
flexible	0.2 mm² ... 2.5 mm²
flexible with ferrule without plastic sleeve	0.25 mm² ... 2.5 mm²
flexible with ferrule with plastic sleeve	0.25 mm² ... 1.5 mm²
rigid (AWG)	24 ... 12
Stripping length	10 mm
Conductor connection
Connection method	Push-in connection
rigid	0.2 mm² ... 4 mm²
flexible	0.2 mm² ... 2.5 mm²
flexible with ferrule without plastic sleeve	0.25 mm² ... 2.5 mm²
flexible with ferrule with plastic sleeve	0.25 mm² ... 1.5 mm²
rigid (AWG)	24 ... 12
Stripping length	10 mm
Conductor connection
Connection method	Push-in connection
rigid	0.2 mm² ... 1.5 mm²
flexible	0.2 mm² ... 1.5 mm²
flexible with ferrule without plastic sleeve	0.2 mm² ... 1.5 mm²
flexible with ferrule with plastic sleeve	0.2 mm² ... 0.75 mm²
rigid (AWG)	24 ... 16
Stripping length	8 mm
Conductor connection
Connection method	Push-in connection
rigid	0.2 mm² ... 10 mm²
flexible	0.2 mm² ... 6 mm²
flexible with ferrule without plastic sleeve	0.25 mm² ... 6 mm²
flexible with ferrule with plastic sleeve	0.25 mm² ... 4 mm²
rigid (AWG)	24 ... 8
Stripping length	15 mm

 

Interfaces

Interface	USB (Modbus/RTU)
Number of interfaces	1
Connection method	MINI-USB Type B
Locking	Screw

 

Electrical properties

Number of phases	1.00
Insulation voltage input/output	3 kV AC (type test)
	1.5 kV AC (routine test)
Insulation voltage output / PE	500 V AC (type test)
	500 V AC (routine test)
Insulation voltage input / PE	1.5 kV AC (type test)
	1.5 kV AC (routine test)

 

Product properties

Product type	DC UPS with integrated power supply
Product family	TRIO UPS
MTBF (IEC 61709, SN 29500)	> 1395470 h (230 V AC, at 25 °C)
	> 825726 h (230 V AC, at 40 °C)
	> 388314 h (230 V AC, at 60 °C)
Insulation characteristics
Protection class	I
Degree of pollution	2
Life expectancy (electrolytic capacitors)
Current	5 A
Temperature	40 °C
Additional text	230 V AC

 

Dimensions

Item dimensions
Width	115 mm
Height	130 mm
Depth	60 mm
Installation dimensions
Installation distance right/left	0 mm / 0 mm
Installation distance top/bottom	50 mm / 50 mm

 

Mounting

Mounting type	DIN rail mounting
Assembly instructions	alignable: horizontally 0 mm, vertically 50 mm
Mounting position	horizontal DIN rail NS 35, EN 60715

 

Material specifications

Flammability rating according to UL 94 (housing / terminal blocks)	V0
Housing material	Metal
Hood version	PC
Side element version	Aluminum

 

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Ambient temperature (start-up type tested)	-40 °C
Maximum altitude	≤ 4000 m (> 2000 m, observe derating)
Climatic class	3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)	≤ 95 % (At +25°C, non-condensing)
Shock	30g, 18 ms in accordance with IEC 60068-2-27
Vibration (operation)	< 12 ... 13.2 Hz, amplitude ±1 mm, 13.2 ... 100 Hz, 0.7g in accordance with IEC 60068-2-6

 

Standards and regulations

Overvoltage category
EN 61010-1	II
Safety for measurement, control, and laboratory equipment
Standard designation	Safety for equipment for measurement, control, and laboratory use
Standards/specifications	IEC 61010-1
Protective extra-low voltage
Standard designation	Protective extra-low voltage
Standards/specifications	IEC 61010 (SELV) / (PELV)
Safe isolation
Standard designation	Safe isolation
Standards/specifications	DIN VDE 0100-410
Low-voltage power supplies, DC output
Standard designation	Low-voltage power supplies, DC output
Standards/specifications	EN 61204-3
Ship’s bridge
Standard designation	Ship’s bridge
Standards/specifications	IEC/EN 60945

 

Approvals

UL
Identification	UL Listed UL 61010
UL
Identification	UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C
Shipbuilding
Identification	DNV
Shipbuilding
Identification	LR

 

EMC data

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
EMC requirements for noise emission	EN 61000-6-3
	EN 61000-6-4
EMC requirements for noise immunity	EN 61000-6-1
	EN 61000-6-2
Noise immunity	Immunity in accordance with EN 61000-6-2 (industrial)
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Conducted noise emission	EN 61000-6-3
Noise emission	EN 61000-6-3
DNV GL conducted interference	Class B
Additional text	Area power distribution
DNV GL noise radiation	Class B
Additional text	Bridge and deck area
Harmonic currents
Standards/regulations	EN 61000-3-2
Flicker
Standards/regulations	EN 61000-3-3
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	6 kV (Test Level 3)
Discharge in air	8 kV (Test Level 3)
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 6 GHz
Test field strength	10 V/m
Frequency range	1.4 GHz ... 6 GHz
Test field strength	3 V/m
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	4 kV
Output	2 kV
Signal	2 kV
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Input	2 kV (Test Level 4 - symmetrical)
	4 kV (Test Level 4 - asymmetrical)
Output	1 kV (Test Level 3 - symmetrical)
	2 kV (Test Level 3 - asymmetrical)
Signal	1 kV (Test Level 2 - asymmetrical)
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz
Voltage	10 V

 

Commercial data

Item number	2907160
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	CMUO13
Catalog page	Page 354 (C-4-2019)
GTIN	4055626166575
Weight per piece (including packing)	957.8 g
Weight per piece (excluding packing)	741 g
Customs tariff number	85044083
Country of origin	CN

 

Classifications

ECLASS

ECLASS-11.0	27040705
ECLASS-13.0	27040705
ECLASS-12.0	27040705

 

ETIM

ETIM 8.0

EC000382

 

UNSPSC

UNSPSC 21.0

39121000

 

Approvals

DNV

Approval ID: TAA00002DW
 

IECEE CB Scheme

Approval ID: DK-63811-UL

EAC

Approval ID: RU S-DE.BL08.W.00764

LR

Approval ID: LR2002877TA

EAC

Approval ID: RU-DE.B.00184/20

UL Listed

Approval ID: FILE E 123528

cUL Listed

Approval ID: FILE E 123528

BSH

Approval ID: 1025a

KC

Approval ID: R-R-PCK-2907160

cUL Listed

Approval ID: FILE E 199827

UL Listed

Approval ID: FILE E 199827
 

cULus Listed

 

cULus Listed

 

Environmental product compliance

REACh SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 25;
	For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

- Tài liệu kỹ thuật Phoenix Contact TRIO-UPS-2G/1AC/24DC/5 - 2907160 ở đây.

 

Compatible products

Energy storage
UPS-BAT/PB/24DC/1.2AH - 1274520
Energy storage
UPS-BAT/PB/24DC/4AH - 1274117
Energy storage
UPS-BAT/PB/24DC/7AH - 1274118
Energy storage
UPS-BAT/PB/24DC/12AH - 1274119
Energy storage
UPS-BAT/PB/24DC/20AH - 1348516
Energy storage
UPS-BAT/PB/24DC/40AH - 1354641
Energy storage
UPS-BAT/VRLA-WTR/24DC/26AH - 2320429
Energy storage
UPS-BAT/VRLA-WTR/24DC/13AH - 2320416
Data cable
MINI-SCREW-USB-DATACABLE - 2908217
Mounting adapter
UWA 130 - 2901664
Mounting adapter
UWA 182/52 - 2938235