Bộ nguồn lưu điện UPS DC 24vDC 10A -Phoenix Contact - Uninterruptible power supply - QUINT-DC-UPS/24DC/10 - 2866226

Bộ nguồn lưu điện UPS DC 24vDC 10A -Phoenix Contact - Uninterruptible power supply - QUINT-DC-UPS/24DC/10 - 2866226

6,107
Nhà sản xuất:

Phoenix Contact

;   

Xuất xứ: Germany

Giá sỉ:

Giá tốt nhất xem...0909186879 dienelectrics@gmail.com

Khuyến mãi:có discount
Bảo hành:12 Tháng (Chính hãng)
Thanh toán:C.O.D / Bảo lãnh TT / Linh hoạt
Vận chuyển:Miễn phí Tp.HCM, và vùng phụ cận
Thông tin nổi bật

Chi tiết thông tin đặc tính sản phẩm

Bộ nguồn lưu điện UPS Bộ nguồn lưu điện UPS DC 24vDC 10A -Phoenix Contact - Uninterruptible power supply - QUINT-DC-UPS/24DC/10 - 2866226


Chú ý: This product is no longer available (but have stocked). It has been replaced by:

Uninterruptible power supply - QUINT-UPS/ 24DC/ 24DC/10 - 2320225

(Uninterruptible power supply with IQ technology for DIN rail mounting, input: 24 V DC, output: 24 V DC/10 A, including mounted universal DIN rail adapter UTA 107/30)


 

Ưu điểm nổi bật

- UPS tự động: Trong trường hợp mất điện DC, thiết bị, máy móc vẫn tiếp tục hoạt động mà không bị gián đoạn;
- Tiết kiệm thời gian: Khi điện áp cung cấp được khôi phục, thiết bị máy móc sẽ tự động khởi động
 

Ứng dụng

Duy trì tiếp tục năng lượng ngay cả khi mất điện, bảo vệ hệ thống thiết bị, máy móc  khỏi sai sót của hệ thống cấp điện. Là giải pháp tích hợp với nguồn điện hoặc lưu trữ năng lượng tiết kiệm không gian, phần mềm cho phép cấu hình và giám sát hệ thống UPS. Có thể sử dụng các mô đun bộ đệm để mở rộng hệ thống UPS và cũng có thể cầu thời gian ngắn thất bại kéo dài đến 30 giây.

Các giải pháp UPS cho mọi yêu cầu và ứng dụng: sử dụng trong công nghiệp, xây dựng tự động hóa hoặc kỹ thuật cũng như cung cấp tải DC.


 

Hướng dẫn lắp đặt

Vui lòng xem hướng dẫn chi tiết bến dưới. Xin cám ơn!

 

Bản vẽ

Block diagram Bộ nguồn lưu điện UPS DC 24vDC 10A -Phoenix Contact - Uninterruptible power supply - QUINT-DC-UPS/24DC/10 - 2866226
Block diagram


Diagram Block diagram Bộ nguồn lưu điện UPS DC 24vDC 10A -Phoenix Contact - Uninterruptible power supply - QUINT-DC-UPS/24DC/10 - 2866226
Diagram


 

Kích thước tiêu chuẩn

Width 100 mm
Height 130 mm
Depth 125 mm



 

Điều kiện môi trường hoạt động

Degree of protection IP20
Ambient temperature (operation) 0 °C ... 50 °C
Ambient temperature (storage/transport) 0 °C ... 40 °C
Max. permissible relative humidity (operation) 95 % (at 25 °C, non-condensing)



 

Dữ liệu đầu vào

Nominal input voltage 24 V DC
Input voltage range 22.5 V DC ... 30 V DC
Current consumption approx. 0.1 A
  0.5 A (charging process)
  10.5 A (max.)
Current consumption (maximum) 10.5 A (max.)
Current consumption (idle) approx. 0.1 A
Current consumption (charging process) 0.5 A (charging process)
Buffer period 1.5 min. (10 A)
  20 min. (2 A)
Input fuse 15 A (slow-blow, internal)



 

Dữ liệu đầu ra

Nominal output voltage 24 V DC (Normal operation: Uin- 0.5 V DC, buffer mode: 27.9 to 19.2 V DC)
Nominal output current (IN) 10 A
Connection in parallel No
Connection in series yes
Output power 240 W



 

Thông tin chung

Disposal Used batteries must not be thrown away with household waste, they should instead be disposed of in accordance with applicable national regulations. They can also be returned to Phoenix Contact or the manufacturer.
Net weight 1.8 kg
Memory medium Internal, battery 1.3 Ah
Operating voltage display Green LED
Efficiency > 91 %
Insulation voltage input/output 2 kV (routine test)
  4 kV (type test)
Protection class II (in closed control cabinet)
Degree of protection IP20
MTBF (IEC 61709, SN 29500) > 500000 h
Mounting position horizontal DIN rail NS 35, EN 60715
Assembly instructions alignable: horizontally 0 mm, vertically 50 mm



 

Tiêu chuẩn kết nối dữ liệu đầu vào

Connection method Pluggable screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Stripping length 7 mm
Screw thread M3



 

Dữ liệu kết nối đầu ra

Connection method Pluggable screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Stripping length 7 mm
Screw thread M3



 

Tín hiệu truyền

Output description Power OK
Status display LED "Power OK" green
Note on status display Power OK: LED permanently lit
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Screw thread M3
Output name floating
Output description Alarm
Maximum switching voltage ≤ 30 V AC/DC
Continuous load current ≤ 1 A
Status display LED red
Note on status display Alarm: LED permanently lit
Output name floating
Output description Battery Charge
Maximum switching voltage ≤ 30 V AC/DC
Continuous load current ≤ 1 A
Status display LED yellow, flashing
Note on status display Battery charge: LED flashing
Output name floating
Output description Battery Mode
Type of signaling LED, relay contact
Maximum switching voltage ≤ 30 V AC/DC
Continuous load current ≤ 1 A
Status display Yellow LED
Note on status display Battery mode: LED permanently lit



 

Tiêu chuẩn và Quy định

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Noise emission EN 55011 (EN 55022)
Noise immunity EN 61000-6-2:2005
Connection in acc. with standard CUL
Low Voltage Directive Conformance with LV directive 2006/95/EC
Standard - Safety of transformers EN 61558-2-17
Standard - Electrical safety EN 60950-1/VDE 0805 (SELV)
  EN 61558-2-17
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV)
Standard - Safe isolation DIN VDE 0100-410
Shipbuilding approval DNV GL (EMC A), ABS
UL approvals UL/C-UL listed UL 508
  UL/C-UL Recognized UL 60950-1
  UL/C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D



 

Tiêu chuẩn thân thiện môi trường

China RoHS Environmentally Friendly Use Period = 3
  For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”



 

Tiêu chuẩn phân lớp

 

eCl@ss

eCl@ss 4.0 27040603
eCl@ss 4.1 27040603
eCl@ss 5.0 27040603
eCl@ss 5.1 27040603
eCl@ss 6.0 27040603
eCl@ss 7.0 27040603
eCl@ss 8.0 27040603
eCl@ss 9.0 27040705



 

ETIM

ETIM 2.0 EC000382
ETIM 3.0 EC000382
ETIM 4.0 EC000382
ETIM 5.0 EC000382
ETIM 6.0 EC000382



 

UNSPSC

UNSPSC 6.01 30211510
UNSPSC 7.0901 39121011
UNSPSC 11 39121011
UNSPSC 12.01 39121011
UNSPSC 13.2 39121011


 

Chứng chỉ được chứng nhận

Chứng chỉ được chứng nhận

 

- Download Tài liệu chi tiết Bộ nguồn lưu điện UPS DC 24vDC 10A -Phoenix Contact - Uninterruptible power supply - QUINT-DC-UPS/24DC/10 - 2866226

 

- Download Tài liệu hướng dẫn sử dụng Bộ nguồn lưu điện UPS DC 24vDC 10A -Phoenix Contact - Uninterruptible power supply - QUINT-DC-UPS/24DC/10 - 2866226



- Download Tài liệu kỹ thuật Bộ nguồn lưu điện UPS DC 24vDC 10A -Phoenix Contact - Uninterruptible power supply - QUINT-DC-UPS/24DC/10 - 2866226


 
- Download Tài liệu lắp đặt Bộ nguồn lưu điện UPS DC 24vDC 10A -Phoenix Contact - Uninterruptible power supply - QUINT-DC-UPS/24DC/10 - 2866226
 


Sản phẩm cùng loại
SẢN PHẨM XEM NHIỀU
Gọi điện thoại