Bộ lưu điện UPS DC 12V 4A Phoenix Contact MINI-DC-UPS/12DC/4 - 2866598

Bộ lưu điện UPS DC 12V 4A Phoenix Contact MINI-DC-UPS/12DC/4 - 2866598

576
Nhà sản xuất:

Phoenix Contact

;   

Xuất xứ: Germany

Giá sỉ:

Giá tốt nhất xem...0909186879 dienelectrics@gmail.com

Khuyến mãi:Có Discount
Bảo hành:12 Tháng (Chính hãng)
Thanh toán:C.O.D / Bảo lãnh TT / Link hoạt
Vận chuyển:Miễn phí Tp.HCM, vùng lân cận
Thông tin nổi bật

Bộ lưu điện UPS DC 12V 4A Phoenix Contact MINI-DC-UPS/12DC/4 - 2866598

Uninterruptible power supply with integrated power supply unit, 4 A, in combination with MINI-BAT/12/DC 1.6 Ah or 2.6 Ah

 

 

Product description

The MINI UPS modules with integrated power supply are particularly space-saving: UPS module and power supply in one housing. Only one energy storage is required to complete the UPS system.
Energy storage with lead AGM technology enables buffer times of up to 2 hours under nominal load for output voltages of 24 V DC or 12 V DC.

 

Technical data

Input data

DC operation
Input voltage 12 V DC
Input voltage range 100 V DC ... 350 V DC (UL508: 100...250 V DC)
Voltage type of supply voltage DC
Inrush current < 34 A
Inrush current integral (I2t) < 1.1 A2s
Mains buffering time see diagram
Buffer period 20 min. (4 A)
Rotary selector switch Can be set to: 0.5 min; 1 min; 2 min; 3 min; 5 min; 10 min; 15 min; 20 min; 30 min; permanent
Current consumption 0.5 A
0.65 A (230 V AC)
1.15 A
1.35 A (120 V AC)
Protective circuit Varistor
Power factor (cos phi) approx. 0.5
Typical response time 100 ms
Input fuse 3.15 A (slow-blow, internal)
Permissible backup fuse B6 B10 B16
Recommended breaker for input protection 6 A ... 16 A (Characteristics B, C, D, K)
AC operation
Nominal input voltage range 100 V AC ... 240 V AC
Input voltage range 85 V AC ... 264 V AC
Voltage type of supply voltage AC
 

Output data

Efficiency > 82 %
Nominal output voltage 12 V DC (AC input voltage available: 10 to 16 V DC, AC input voltage not available: 13.6 to 9.6 V DC)
Setting range of the output voltage (USet) 10 V DC ... 16 V DC (AC input voltage available, AC input voltage not available: Output voltage depending on the battery voltage: 13.6 V DC ... 9.6 V DC)
Nominal output current (IN) 4 A
Output current limit max. 7 A
Bridging time 1200 s
Derating 60 °C ... 70 °C (2.5%/K)
Feedback voltage resistance 35 V DC
Protection against overvoltage at the output (OVP) < 35 V DC
Max. capacitive load unlimited
Control deviation < 1 % (change in load, static 10 % ... 90 %)
Residual ripple < 50 mVPP
Output power 48 W
Peak switching voltages nominal load < 100 mVPP
Maximum no-load power dissipation 3.8 W
Power loss nominal load max. 10.5 W
Power dissipation battery operation 2.9 W
Power dissipation 1.6 W
10.5 W
2.6 W
Rise time < 100 ms
Connection in parallel yes
Connection in series No
Mains operation
Nominal output voltage 12 V DC
Output voltage range 22.5 V DC ... 29.5 V DC
Nominal output current (IN) 4 A
Battery operation
Nominal output voltage 12 V DC
Output voltage range 19.2 V DC ... 27.6 V DC (UOUT = UBAT - 0,5 V DC)
Nominal output current (IN) 4 A
Signal
Continuous load current ≤ 20 mA
Signal: Alarm
Output description Relay output
Maximum switching voltage ≤ 12 V
Output voltage 12 V
Continuous load current ≤ 200 mA
Signal: Battery charge
Output description Relay output
Maximum switching voltage ≤ 12 V
Output voltage 12 V
Continuous load current ≤ 200 mA
Signal: Battery mode
Output description Relay output
Maximum switching voltage ≤ 12 V
Output voltage 12 V
Continuous load current ≤ 200 mA
 

Energy storage

Charging current 1 A
Memory medium external, rechargeable battery 1.6 Ah / 2.6 Ah
IQ technology no
Network management No
 

Connection data

Input
Connection method Pluggable COMBICON screw connections
Conductor cross section, rigid min. 0.2 mm²
Conductor cross section, rigid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Stripping length 8 mm
Screw thread M3
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Output
Connection method Pluggable COMBICON screw connections
Conductor cross section, rigid min. 0.2 mm²
Conductor cross section, rigid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Stripping length 8 mm
Screw thread M3
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Signal
Conductor cross section, rigid min. 0.2 mm²
Conductor cross section, rigid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Screw thread M3
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
 

Signaling

Types of signaling LED
Signal output
Status display LED "Power Good", green
Note on status display Buffer module is loaded: LED ON
Signal output: Alarm
Status display LED red
Note on status display Malfunction/alarm: LED permanently lit
Signal output: Battery charge
Status display LED flashing yellow
Note on status display Battery charge/battery is being charged: LED flashing
Signal output: Battery mode
Status display Yellow LED
Note on status display Battery mode/buffer mode: LED permanently lit
 

Electrical properties

Insulation voltage input/output 4 kV (type test)
2 kV (routine test)
 

Product properties

Product type DC UPS with integrated power supply
Product family MINI UPS – UPS with integrated power supply
IQ technology no
MTBF (IEC 61709, SN 29500) > 728000 h (40 °C)
Insulation characteristics
Protection class II (in closed control cabinet)
Degree of pollution 2
 

Dimensions

Width 67.5 mm
Height 99 mm
Depth 107 mm
Installation dimensions
Installation distance right/left 0 mm / 0 mm
Installation distance top/bottom 30 mm / 30 mm
 

Mounting

Mounting type DIN rail mounting
Assembly instructions alignable: horizontally 0 mm, vertically 50 mm
Mounting position horizontal DIN rail NS 35, EN 60715
 

Material specifications

Housing material Plastic
Type of housing Polyamide PA, color: green
 

Environmental and real-life conditions

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport) -40 °C ... 80 °C
Climatic class 3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation) 95 % (at 25 °C, non-condensing)
Shock 18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation) < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
15 Hz ... 150 Hz, 2.3g, 90 min.
 

Standards and regulations

Rail applications EN 50121-4
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV)
Standard - Electrical safety EN 60950-1/VDE 0805 (SELV)
EN 61558-2-17
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment EN 50178
Standard – Safety extra-low voltage EN 60950-1 (SELV)
EN 60204 (PELV)
Standard - Safe isolation DIN VDE 0100-410
 

Approvals

UL approvals UL Listed UL 508
UL/C-UL Recognized UL 60950-1
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
 

EMC data

Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
EMC requirements for noise emission EN 61000-6-3
EN 61000-6-4
EMC requirements for noise immunity EN 61000-6-1
EN 61000-6-2
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Noise emission EN 55011 (EN 55022)
Electrostatic discharge
Standards/regulations EN 61000-4-2
Housing Level 3
Electrostatic discharge
Contact discharge 6 kV
Discharge in air 8 kV
Comments Criterion B
Electromagnetic HF field
Standards/regulations EN 61000-4-3
Electromagnetic HF field
Frequency range 80 MHz ... 2 GHz
Test field strength 10 V/m
Comments Criterion A
Fast transients (burst)
Standards/regulations EN 61000-4-4
Fast transients (burst)
Input 4 kV (level 4 - asymmetrical: conductor to ground)
Output 2 kV (level 3 - asymmetrical: conductor to ground)
Signal 1 kV (level 2 - asymmetrical: conductor to ground)
Comments Criterion B
Surge voltage load (surge)
Standards/regulations EN 61000-4-5
Conducted interference
Standards/regulations EN 61000-4-6
Conducted interference
I/O/S Level 3
Frequency range 10 kHz ... 80 MHz
Comments Criterion A
Voltage 10 V
Voltage dips
Standards/regulations EN 61000-4-11
Emitted interference
Standards/regulations EN 61000-6-3
Radio interference voltage in acc. with EN 55011 EN 55011 (EN 55022) Class B, area of application: Industry and residential
Emitted radio interference in acc. with EN 55011 EN 55011 (EN 55022) Class B, area of application: Industry and residential
 

Commercial data

Item number 2866598
Packing unit 1 pc
Minimum order quantity 1 pc
Product key CMUM12
Catalog page Page 350 (C-4-2019)
GTIN 4046356418522
Weight per piece (including packing) 494 g
Weight per piece (excluding packing) 491 g
Customs tariff number 85371091
Country of origin CN
 

Classifications

ECLASS

ECLASS-11.0 27040705
ECLASS-13.0 27040705
ECLASS-12.0 27040705
 

ETIM

ETIM 8.0 EC000382
 

UNSPSC

UNSPSC 21.0 39121000
 

Approvals

 

cUL Recognized

Approval ID: FILE E 211944
 

UL Recognized

Approval ID: FILE E 211944
 

EAC

Approval ID: EAC-Zulassung
 

EAC

Approval ID: RU S-DE.BL08.W.00764
 

UL Listed

Approval ID: FILE E 123528
 

EAC

Approval ID: RU-DE.B.00184/20
 

cUL Listed

Approval ID: FILE E 199827
 

UL Listed

Approval ID: FILE E 199827
 

cULus Recognized

 

cULus Listed

 

Environmental product compliance

 
REACh SVHC Lead 7439-92-1
 
China RoHS Environmentally Friendly Use Period = 25;
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”


- Tài liệu kỹ thuật Phoenix Contact MINI-DC-UPS/12DC/4 - 2866598 ở đây.

 

Compatible products

Energy storage
MINI-BAT/12DC/1.6AH - 2866572
Energy storage
MINI-BAT/12DC/2.6AH - 2866569
 
Sản phẩm cùng loại
SẢN PHẨM XEM NHIỀU
Gọi điện thoại