Bộ nguồn 24vDC 5A 1AC 120/230V - Siemens - SITOP PSU100S 24 V/5 A - 6EP1333-2BA20

Product

SITOP PSU100S

Power supply, type

24 V/5 A

Input

Input

1-phase AC

Supply voltage

• ● 1 at AC Rated value

120 V

• ● 2 at AC Rated value

230 V

• ● Note

Automatic range selection

Input voltage

• ● 1 at AC

85 ... 132 V

• ● 2 at AC

170 ... 264 V

Wide-range input

No

Overvoltage resistance

2.3 × Vin rated, 1.3 ms

Mains buffering at Iout rated, min.

20 ms; at Vin = 93/187 V

Rated line frequency 1

50 Hz

Rated line frequency 2

60 Hz

Rated line range

47 ... 63 Hz

Input current

• ● at rated input voltage 120 V

2.34 A

• ● at rated input voltage 230 V

1.36 A

Switch-on current limiting (+25 °C), max.

40 A

I²t, max.

1 A²·s

Built-in incoming fuse

T 3,15 A/250 V (not accessible)

Protection in the mains power input (IEC 898)

Recommended miniature circuit breaker: from 6 A characteristic C

Output

Output

Controlled, isolated DC voltage

Rated voltage Vout DC

24 V

Total tolerance, static ±

3 %

Static mains compensation, approx.

0.1 %

Static load balancing, approx.

1 %

Residual ripple peak-peak, max.

150 mV

Residual ripple peak-peak, typ.

30 mV

Spikes peak-peak, max. (bandwidth: 20 MHz)

240 mV

Spikes peak-peak, typ. (bandwidth: 20 MHz)

140 mV

Adjustment range

22.8 ... 28 V

Product function Output voltage adjustable

Yes

Output voltage setting

via potentiometer

Status display

Green LED for 24 V OK

Signaling

Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK"

On/off behavior

Overshoot of Vout < 3 %

Startup delay, max.

0.3 s

Voltage rise, typ.

15 ms

Voltage increase time of the output voltage maximum

Rated current value Iout rated

5 A

Current range

0 ... 6 A

• ● Note

6 A up to +45°C; +60 ... +70 °C: Derating 1.6%/K

Supplied active power typical

144 W

Short-term overload current

• ● on short-circuiting during the start-up typical

18 A

• ● at short-circuit during operation typical

18 A

Duration of overloading capability for excess current

• ● on short-circuiting during the start-up

800 ms

• ● at short-circuit during operation

800 ms

Parallel switching for enhanced performance

Yes

Numbers of parallel switchable units for enhanced performance

2

Efficiency

Efficiency at Vout rated, Iout rated, approx.

88 %

Power loss at Vout rated, Iout rated, approx.

16 W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %), max.

0.3 %

Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.

Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.

3 %

Load step setting time 10 to 90%, typ.

1 ms

Load step setting time 90 to 10%, typ.

1 ms

Setting time maximum

Protection and monitoring

Output overvoltage protection

protection against overvoltage in case of internal fault Vout < 33 V

Current limitation

6 ... 7.1 A

Current limitation, typ.

Property of the output Short-circuit proof

Yes

Short-circuit protection

Constant current characteristic

Enduring short circuit current RMS value

• ● maximum

• ● typical

7.1 A

Overcurrent overload capability in normal operation

overload capability 150 % Iout rated up to 5 s/min

Overload/short-circuit indicator

-

Safety

Primary/secondary isolation

Yes

Galvanic isolation

Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178

Protection class

Class I

Leakage current

• ● maximum

3.5 mA

• ● typical

0.4 mA

CE mark

Yes

UL/cUL (CSA) approval

cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259, cCSAus (CSA C22.2 No. 60950-1, UL 60950-1, UL 1604)

Explosion protection

IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2, Group ABCD, T4

FM approval

-

CB approval

Yes

Marine approval

GL, BV

Degree of protection (EN 60529)

IP20

EMC

Emitted interference

EN 55022 Class B

Supply harmonics limitation

EN 61000-3-2

Noise immunity

EN 61000-6-2

Operating data

Ambient temperature

• ● during operation

-25 ... +70 °C

• — Note

with natural convection

• ● during transport

-40 ... +85 °C

• ● during storage

-40 ... +85 °C

Humidity class according to EN 60721

Climate class 3K3, no condensation

Mechanics

Connection technology

screw-type terminals

Connections

• ● Supply input

L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² single-core/finely stranded

• ● Output

+, -: 2 screw terminals each for 0.5 ... 2.5 mm²

• ● Auxiliary

Alarm signals: 2 screw terminals for 0.5 ... 2.5 mm²

Connections signaling contact

2 screw terminals for 0.5 ... 2.5 mm²

Width of the enclosure

50 mm

Height of the enclosure

125 mm

Depth of the enclosure

120 mm

Required spacing

• ● top

50 mm

• ● bottom

50 mm

• ● left

0 mm

• ● right

0 mm

Weight, approx.

0.5 kg

Product feature of the enclosure housing for side-by-side mounting

Yes

Installation

Snaps onto DIN rail EN 60715 35x7.5/15

Electrical accessories

Buffer module

Mechanical accessories

MTBF at 40 °C

1 998 441 h

Other information

Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

SITOP PSE202U redundancy module

6EP1961-3BA21

Input/output: 24 V DC/40 A 
suitable for decoupling two SITOP power supplies with a maximum of 20 A output current

SITOP PSE202U redundancy module

6EP1962-2BA00

Input/output: 24 V DC/NEC Class 2 
suitable for decoupling two SITOP power supplies output power limited < 100 VA

SITOP PSE202U redundancy module

6EP1964-2BA00

Input/output: 24 V DC/10 A 
suitable for decoupling two SITOP power supplies with a maximum of 5 A output current

SITOP PSE200U 3 A selectivity module

4-channel selectivity module 
Input: 24 V DC 
Output: 24 V DC/3 A per channel 
Adjustable response threshold 0.5 … 3 A

• With common alarm signal

6EP1961-2BA11

• With single-channel signaling

6EP1961-2BA31

SITOP PSE200U 3 A NEC Class 2 selectivity module

4-channel selectivity module 
Input: 24 V DC 
Output: 24 V DC/3 A per channel 
Adjustable response threshold 0.5 … 3 A

• With common alarm signal

6EP1961-2BA51

• With single-channel signaling

6EP1961-2BA61

SITOP PSE200U 10 A selectivity module

4-channel selectivity module 
Input: 24 V DC 
Output: 24 V DC/10 A per channel 
Adjustable response threshold 3 … 10 A

• With common alarm signal

6EP1961-2BA21

• With single-channel signaling

6EP1961-2BA41

SITOP PSE201U buffer module

6EP1961-3BA01

For SITOP smart and SITOP modular
buffer time 100 ms to 10 s 
dependent on load current