Bộ truyền động van khí Siemens SKP55.001E2

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm SIEMENS

• Xem thêm

Siemens SKP55.001E2 là Bộ truyền động van khí, có chỉnh chênh áp, DIN EN 175301-803, kiểu A, end-switch (đóng hoàn toàn), AC 230V, 50/60Hz, On/Off 1 cấp

Bộ truyền động cho van khí, công tắc cuối, 1 cấp, AC230V. Bộ truyền động cho van khí, đóng/mở, có bộ điều chỉnh áp suất chênh lệch, tiêu chuẩn, đầu nối theo DIN EN 175301-803, thiết kế A, có công tắc cuối (van đóng hoàn toàn), AC 230 V, 50/60 Hz, đóng mở 1 cấp (EU).
 

- Tài liệu kỹ thuật của Bộ truyền động van khí Siemens SKP55.001E2 ở đây

     

Tham khảo thêm các model khác cùng loại với Siemens SKP55.001E2:

LME21.230C2
Burner control, 2-stage, ion, t1=20s, TSA=3s, AC230V

LME21.330C2
Burner control, 2-stage, ion, t1=30s, TSA=3s, AC230V

LME21.350C2
Burner control, 2-stage, ion, t1=30s, TSA=5s, AC230V

LME22.131C2
Burner control, 2-stage, ion, t1=7s, TSA=3s, actuator 12s, AC230V

LME22.232C2
Burner control, 2-stage, ion, t1=20s, TSA=3s, actuator 20s, AC230V

LME22.233C2
Burner control, 2-stage, ion, t1=20s, TSA=3s, actuator 30s, AC230V

LME22.331C2
Burner control, 2-stage, ion, t1=30s, TSA=3s, actuator 12s, AC230V

LMO14.111C2
Oil burner control, 1-stage, QRB/QRC, up to 30kg/h, TSA=10s, t3n=10s, AC230V

LMO24.111C2
Oil burner control, 2-stage, QRB/QRC, TSA=10s, t3n=10s, AC230V

LMO44.255C2
Oil burner control, stationary air heaters, 2-stage, QRB/QRC, 30kg/h, AC230V

AGG3.710
Plug set, for LME7/LME8, RAST5 and RAST3,5

AGG3.720
10 plug sets, for LME7/LME8, RAST5 and RAST3,5

AGK11
Plug-in base, for phase-controlled burner controls, black

AGK25
PTC resistor, AC230V

AGK65
Cable gland holder, for small capacity burner controls, Pg11

AGQ1.1A27
Auxiliary unit, for LGB, for UV supervision, cable length 500mm

ARC466890660
RC unit, for LMG/LGD1/LGB/LGA/LME/LMO82/LMO11

OCI412.10
Mobus interface (RS-485), between burner control and Modbus system

LMV26.300A2
Oil/gas burner control, ratio control, intermittent, fuel selection, AC230V

LMV27.100A2
Oil/gas burner control, ratio control, intermittent, AC230V

LMV37.400A2
Oil/gas burner control, ratio control, continuous, AC230V

LMV37.420A1
Oil/gas burner control, ratio control, continuous, AC120V (US)

AGG3.131
Complete plug set, for LMV3, RAST2,5/RAST3,5/RAST5

AGG3.151
Plug set, for AGM60.1A9, RAST5 (EU)

AGG5.110
CAN bus connection shield, for LMV5, CAN bus to basic unit

AGG5.210
Mains transformer, for LMV5 system (US)

AGG5.220
Mains transformer, for LMV5 system

AGG5.310
Inductive sensor, for LMV5, signal disk (70mm external dia)

AGG5.315
Inductive sensor, for LMV5, signal disk (95mm external dia)

AGG5.635
CAN bus cable, for LMV5, length 3m

AGG5.641
CAN bus cable, for LMV5, length 100m, 8mm dia

AGG5.720
Standard connector, for LMV5 system

AGG5.721
Extension connector, for LMV5 connector

AGM60.1A9
Dual-fuel switch box, for LMV26/LMV36 (EU)

SQM50.381A2
Actuator, 10Nm, 90°/15s, 8 switches, shaft 10mm+key, CE, AC230V

SQM50.481A2
Actuator, 15Nm, 90°/30s, 8 switches, shaft 10mm+key, CE, AC230V

SQM50.681A2
Actuator, 15Nm, 90°/60s, 8 switches, shaft 10mm+key, CE, AC230V

SQM56.687A2
Actuator, 40Nm, 90°/60s, 8 switches, shaft 14mm+key, CE, AC230V

SQN30.111A2700
Actuator, 90°/4.5s, 1Nm, 1 relay, 2 auxiliary switches, AC230V

SQN30.401A2700
Actuator, 90°/30s, 3Nm, 3 auxiliary switches, AC230V

SQN31.101A2700
Actuator, 90°/4.5s, 1Nm, 3 auxiliary switches, AC230V

SQN31.251A2700
Actuator, 90°/12s, 1.8Nm, 2 relays, 1 auxiliary switch, AC230V

SQN31.401A2700
Actuator, 90°/30s, 3Nm, 3 auxiliary switches, AC230V

AGA09
Potentiometer fixing ASZxx.7xx/ASZxx.8xx, for SQN9

AGA32
Conversion kit, for retrofitting potentiometer ASZxx.7xx/ASZxx.8xx to SQN3/4

AGA34
Cover, to retrofit potentiometer ASZxx3x to SQN70/SQN71

AGA55.5
Nema 4-kit, for SQM5, doule-sided drive shaft seal

AGA56.41A17
Electronic function module, for SQM5, analog control 4...20mA, AC110V

AGA56.41A27
Electronic function module, for SQM5, analog control 4...20mA, AC230V

AGA56.41A87
Electronic function module, for SQM5, analog control 4...20mA, AC24V

AGA56.9A17
Electronic function module, for SQM5, fully electronic, AC110V

AGA56.9A27
Electronic function module, for SQM5, fully electronic, AC230V

AGA56.9A87
Electronic function module, for SQM5, fully electronic, AC24V

AGA57.1
Spacer, adapter for SQM10/SQM20

AGA57.2
Adapter, for ME8

AGA57.3
Adapter, for Honeywell actuator Mod. 3

AGA58.1
Drive shaft, 10mm dia, one-sided, Woodruff key, max. 10Nm

AGA58.2
Drive shaft, 12mm dia, one-sided, Woodruff key, max. 20Nm

AGA58.3
Drive shaft, Ø9mm, double-sided, max. 25Nm

AGA58.4
Drive shaft, Ø9.5mm, double-sided, (Honeywell), max. 30 Nm

AGA58.7
Drive shaft, 14mm dia, one-sided, key, max. 40Nm

ASZ12.703
Single potentiometer, wire, 90°, 1000Ω

ASZ12.803
Single potentiometer, conductive plastic, 90°, 1000Ω

ASZ22.803
Double potentiometer, conductive plastic, 90°, 2x1000Ω

QRA10.C
UV flame detector, normal sensitivity, housing made of die-cast-aluminium

QRA10M.C
UV flame detector, high sensitivity, housing made of die-cast-aluminium

QRA2(1)
UV flame detector, normal sensitivity, with flange/clamp

QRA2.9
QRA2.9 UV flame detector

QRA2M(1)
UV flame detector, high sensitivity, with flange/clamp

QRA4.U
UV flame detector, for pipe mounting, normal sensitivity (US)

QRA53.E17
UV flame detector, continuous operation, normal sensitivity, 125mm, AC110V

QRA53.E27
UV flame detector, continuous operation, normal sensitivity, 125mm, AC230V

QRA53.G17
UV flame detector, continuous operation, high sensitivity, 125mm, AC110V

QRA53.G27
UV flame detector, continuous operation, high sensitivity, 125mm, AC230V

QRA55.E27
UV flame detector, continuous operation, normal sensitivity, 69mm, AC230V

QRA55.G27
UV flame detector, continuous operation, high sensitivity, 69mm, AC230V

QRC1A2.104C27
QRC1A2.104C27 Blue-flame detector

QRC1C2.103
C27Blue-flame detector, cable 500mm, medium, lateral, plexiglass, with ferrules

RAR9(1)
Silicone photocell detector, length max. 100m, with flange, rounded and clamp

AGG02
Heat-insulating glass, for QRA, with spring washer and O-ring

AGG03
Quartz-glass lens, for QRA10.C/AGG16.C, with spring washer and O-ring

AGG04
Fixing adapter 1", for QRA4.U

AGG05
Nipple 1", for QRA

AGG06
Glass or quartz-glass lens holder, for QRA, with intermediate ring

AGG07
Ball head for QRA.., 1" internally threaded, travel 13°.

AGG16.C
Adapter, for mounting QRA53/55/7, replaces AGG16/AGG16.B

AGG2.110
Adapter, for mounting QRI/QRA, for frontal illumination, ¾" NPSM thread

AGG2.120
Mounting kit with conduit fixing, for QRI, Pg9 x ½" NPT thread

AGM19
Connecting cable, 2m, with plug, for QRA53/QRA55

AGM23
Connecting cable, 2m, with plug, for QRA7 (EU)

AGO20.001A
Flue gas collector, for QGO20, for stack dia up to 400mm

AGO20.002A
Flue gas collector, for QGO20, for stack dia above 400mm

AGR450211310
UV replacement cell, for QRA2/QRA2(1)/QRA2.9/QRA10.C

AGR450240650
UV replacement cell, for QRA2M/QRA2M(1)/QRA10M.C/QRA51M/QRA53/QRA55

ACS450
PC software, for LMV5

AGV50.300
10 connecting cables, for AZL2, with RJ11 connector, cable length 3m

OCI400
Optical interface, between burner control and PC tool ACS400 or ACS410

OCI410.30
Gateway BCI-PC tool ACS410, access level heating engineer

OCI410.40
Gateway BCI-PC tool ACS410, access level OEM

RWF55.50A9
Universal controller, 96x48mm, 3-pos output, analog output and Modbus

SKP15.000E2
Actuator for gas valves, without stroke indication, 1-stage, AC230V

SKP15.001E2
Actuator for gas valves, end switch, 1-stage, AC230V

SKP25.001E2
Actuator for gas valves, end switch, 1-stage, AC230V

SKP25.003E2
Actuator for gas valves, stroke indication, AC230V

SKP25.403E2
Actuator for gas valves, high-pressure, stroke indication, AC230V

SKP55.001E2
Actuator for gas valves, end switch, 1-stage, AC230V

SKP75.001E2
Actuator for gas valves, end switch, 1-stage, AC230V

SKP75.003E2
Actuator for gas valves, stroke indication, AC230V

VGD20.403
Double gas valve, DN1½", 85m³/h, choice of 3 different connections

VGD40.065
Double gas valve, DN65, 160m³/h

VGD40.080
Double gas valve, DN80, 250m³/h

VGF10.654P
Gas valve, DN65, 74m³/h, 2xRp¼", 2xG¾", contoured disk

VGF10.804P
Gas valve, DN80, 85.4m³/h, 2xRp¼", 2xG¾", contoured disk

VGG10.154P
Gas valve, ½", 1200mbar, 4.8m³/h, 4xRp¼", contoured disk

VGG10.204P
Gas valve, ¾", 1200mbar, 8.9m³/h, 4xRp¼", contoured disk

VGG10.254P
Gas valve, 1", 1200mbar, 13.3m³/h, 4xRp¼", contoured disk

VGG10.404P
Gas valve, 1½", 600mbar, 32.3m³/h, 4xRp¼", contoured disk

VGG10.504P
Gas valve, 2", 600mbar, 47.4m³/h, 4xRp¼", contoured disk

VGG10.804P
Gas valve, 3", 600mbar, 85.4m³/h, 2xRp¼", 2xG¾", contoured disk

VRF10.504
Valve for biogas and recycling gas, DN50, 600mbar, 47.4m³/h, 4xRp¼"

VRF10.654
Valve for biogas and recycling gas, DN65, 600mbar, 74m³/h, 2xRp¼", 2xG¾

VRF10.804
Valve for biogas and recycling gas, DN80, 600mbar, 85.4m³/h, 2xRp¼", 2xG¾"

AGA22
Setpoint spring, for SKP25, yellow, optionally 15...120mbar, SKP25.4 (70…700mbar)

AGA23
Setpoint spring, for SKP25, red, optionally 100...250mbar, SKP25.4 (150…1500mbar)

AGA25.2
Damping throttle, for SKP25/26, optionally

AGA61
Manual adjuster, for VG as a differential pressure actuating device for SKP50

AGA62.000A000
Connecting cable, for SKPx5/SKPx6

AGA64
Connector, for SKPx5/SKPx6, power supply

AGA65
Connector, for SKPx5/SKPx6, end switch

AGA66
Gasket set, for SKP/SKLx5, from IP54 to IP65

AGA67
Plug, for SKP25.2/SKP26.2, power supply, bridge rectifier

AGA78
Pressure-reducing T-piece, for SKP75/SKP76, optional

AGF10.40
Connecting flanges, for VGD2/VKP, internally threaded

AGF10.50
Connecting flanges, for VGD2/VKP, internally threaded