Mô-đun Vào-Ra | I/O Systems

Các model Mô-đun I/O thuộc dòng SIMATIC ET 200M cho tủ điều khiển của Siemens | SIMATIC ET 200M for the control cabinet

Bao gồm mô-đun giao diện PROFIBUS DP hoặc PROFINET IM 153, tối đa 8 hoặc 12 mô-đun I/O của hệ thống tự động hóa S7-300 (cấu trúc với kết nối bus hoặc với mô-đun bus hoạt động) và nguồn điện nếu có. Có thể được mở rộng với các mô-đun tín hiệu, truyền thông và chức năng của hệ thống tự động S7-300..
Các model Mô-đun I/O thuộc dòng SIMATIC ET 200M cho tủ điều khiển của Siemens | SIMATIC ET 200M for the control cabinet
SIMATIC ET 200M
Interface modules
IM 153-1/153-2

6ES7153-1AA03-0XB0

SIMATIC DP, Connection IM 153-1, for ET 200M, for max. 8 S7-300 modulesShow prices

6ES7153-2AR04-0XA0

SIMATIC DP, ET 200M Red. Bundle Consisting of: 2x IM 153-2HF (6ES7153-2BA10-0XB0), 1x bus module in/in (6ES7195-7HD10-0XA0)Show prices

6ES7153-2BA10-0XB0

SIMATIC DP, Connection ET 200M IM 153-2 High Feature for max. 12 S7-300 modules with redundancy capability, Timestamping suitable for isochronous mode New features: up to 12 modules can be used Slave INITIATIVE for Drive ES and Switch ES Expanded quantity structure for HART auxiliary variables Operation of the 64-channel modules 32 signals/slot +++Observe compatibility notes in manual+++Show prices

6ES7153-2BA70-0XB0

SIMATIC DP, interface DP/PA-Link and ET200M IM153-2 HF for extended temperature range for max. 12 S7-300 modules with redundancy capability, Timestamping suitable for isochronous mode New features: up to 12 modules can be used Slave Initiative for Drive ES and Switch ES Expanded quantity structure for HART auxiliary variables Operation of the 64-channel modules 32 signals / slot +++ Observe compatibility instructions in manual +++Show prices

6ES7195-7HA00-0XA0

SIMATIC DP, bus module f. ET200M for holding a PS and an IM153 for the function Pulling and plugging during RUN operating mode incl. bus module coverShow prices

6ES7195-7HB00-0XA0

SIMATIC DP, Bus module for ET 200M for holding two 40 mm wide I/O modules for removal and insertion functionShow prices

6ES7195-7HC00-0XA0

SIMATIC DP, Bus module for ET 200M for holding an 80 mm wide I/O module for removal and insertion functionShow prices

6ES7195-7HD10-0XA0

SIMATIC DP, Bus module for ET 200M for holding 2 IM153-2 red. for removal and insertion function during RUN operating time

IM 153-4 PN

6ES7153-4AA01-0XB0

SIMATIC DP, Connection ET 200M IM 153-4 PN IO for max. 12 S7-300 modules, extended functions: Isochronous real-time Communication Class 1 and 2, module replacement without PG operation without MMC, maintenance Support of new IO modulesShow prices

6ES7153-4BA00-0XB0

SIMATIC DP, Connection ET 200M IM 153-4 PN IO High Feature for max. 12 S7-300 modules, supports fail-safe module, HART modules, shared device, Medium Redundancy ProtocolShow prices

6ES7195-7HA00-0XA0

SIMATIC DP, bus module f. ET200M for holding a PS and an IM153 for the function Pulling and plugging during RUN operating mode incl. bus module coverShow prices

6ES7195-7HB00-0XA0

SIMATIC DP, Bus module for ET 200M for holding two 40 mm wide I/O modules for removal and insertion functionShow prices

6ES7195-7HC00-0XA0

SIMATIC DP, Bus module for ET 200M for holding an 80 mm wide I/O module for removal and insertion function

SIPLUS Interface modules
SIPLUS ET 200M IM 153-1/153-2

6AG1153-1AA03-2XB0

SIPLUS DP ET200M IM153-1 -40...+70°C start up Temp -25°C with conformal coating based on 6ES7153-1AA03-0XB0 . INTERFACE FOR ET 200M, FOR MAX. 8 S7-300 MODULESShow prices

6AG1153-2BA10-7XB0

SIPLUS ET 200M IM 153-2 (*BA02) -40...+70°C start up temperature:-25°C with conformal coating based on 6ES7153-2BA10-0XB0 . Connection ET 200M IM 153-2 High Feature for max. 12 S7-300 modules with redundancy capability, Time stamp. suitable for isochronous mode New features: up to 12 modules can be used Slave Initiative for Drive ES and Switch ES Expanded quantity structure for HART auxiliary variables Operation of the 64-channel modules 32 signals/slotShow prices

6AG1195-7HA00-2XA0

SIPLUS ET 200M active bus module 1x ps+1x IM 153 -40...+70°C based on 6ES7195-7HA00-0XA0Show prices

6AG1195-7HB00-7XA0

SIPLUS ET 200M active bus module 2x 40 mm modules -40...+70°C based on 6ES7195-7HB00-0XA0Show prices

6AG1195-7HC00-2XA0

SIPLUS ET 200M active bus module for holding an 80 mm wide I/O module -40...+70°C with conformal coating based on 6ES7195-7HC00-0XA0 . for removal and insertion functionShow prices

6AG1195-7HD10-2XA0

SIPLUS ET 200M active bus module For holding 2 IM 153-2 Red -40...+70°C with conformal coating based on 6ES7195-7HD10-0XA0 . for removal and insertion function during RUN operating time

SIPLUS ET 200M IM 153-4 PN IO

6AG1153-4AA01-7XB0

SIPLUS ET 200M IM 153-4 PN IO -25...+70°C with conformal coating based on 6ES7153-4AA01-0XB0 . for max. 12 S7-300 modules, extended functions: Isochronous real-time Communication Class 1 and 2, module replacement without PG operation without MMC, maintenance Support of new IO modulesShow prices

6AG1153-4BA00-7XB0

SIPLUS ET 200M IM 153-4 PN IO HF -40...+70°C start up temperature:-25°C with conformal coating based on 6ES7153-4BA00-0XB0 . DP, Connection ET 200M for max. 12 S7-300 modules, supports fail-safe module, HART modules, shared device, Medium Redundancy Protocol

I/O modules
Digital modules
SM 321 digital input modules

6ES7321-1BH02-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 16 DI, 24 V DC, 1x 20-poleShow prices

6ES7321-1BH10-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 16 DI, 24 V DC, 1x 20-pole, 0.05 ms input delayShow prices

6ES7321-1BH50-0AA0

SIMATIC S7-300, Digital input SM 321, Isolated 16 DI, 24 V DC, Source input, 1x 20-poleShow prices

6ES7321-1BL00-0AA0

SIMATIC S7-300, Digital input SM 321, Isolated 32 DI, 24 V DC, 1x 40-poleShow prices

6ES7321-1BP00-0AA0

SIMATIC S7-300 digital input SM 321, Isolated in groups of 16, 64 DI, 24 V DC, 3ms, Sink/source input Terminal blocks 6ES7392-1.N00-0AA0 and cable 6ES7392-4...0-0AA0 requiredShow prices

6ES7321-1CH00-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 16 DI, 24-48 V AC/DC with single rooting, 1x 40-poleShow prices

6ES7321-1CH20-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 16 DI, 48-125 V DC, 1x 20-poleShow prices

6ES7321-1EL00-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 32 DI, 120 V AC, 1x 40-poleShow prices

6ES7321-1FF01-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 8 DI, 120 V/230 V AC, 1x 20-poleShow prices

6ES7321-1FF10-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 8 DI, 120 V/230 V AC, 1x 40-pole, with single rooting/channel

6ES7321-1FH00-0AA0

SIMATIC S7-300, Digital input SM 321, Isolated 16 DI, 120/230 V AC, 1x 20-poleShow prices

6ES7321-7BH01-0AB0

SIMATIC S7-300, Digital input SM 321, isolated, 16 DI; 24 V DC, 1x 20-pole, process interrupt, diagnostics, suitable for isochronous mode

SM 322 digital output modules

6ES7322-1BF01-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 24 V DC, 2A, 1x 20-poleShow prices

6ES7322-1BH01-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 16 DO, 24 V DC, 0.5A, 1x 20-pole, Total current 4 A/group (8 A/module)Show prices

6ES7322-1BH10-0AA0

SIMATIC S7-300, Digital output SM 322 High Speed, isolated, 16 DO, 24 V DC, 0.5A, 1x 20-poleShow prices

6ES7322-1BL00-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 32 DO, 24 V DC, 0.5A, 1x 40-pole, Total current 4 A/group (16 A/module)Show prices

6ES7322-1BP00-0AA0

SIMATIC S7-300 digital output SM 322, Isolated in groups of 16, 64DO, 24 V DC, 0.3A sink output Total current 2 A/group, 8 A/module Terminal blocks 6ES7392-1.N00-0AA0 and cable 6ES7392-4...0-0AA0 requiredShow prices

6ES7322-1BP50-0AA0

SIMATIC S7-300 digital output SM 322, Isolated in groups of 16, 64DO, 24 V DC, 0.3A sinking output Total current 2 A/group, 8 A/module Terminal blocks 6ES7392-1.N00-0AA0 and cable 6ES7392-4...0-0AA0 requiredShow prices

6ES7322-1CF00-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 48-125 V DC, 1.5A, 1x 20-poleShow prices

6ES7322-1FF01-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 120/230 V AC, 1 A, 1x 20-poleShow prices

6ES7322-1FH00-0AA0

SIMATIC S7-300, Digital output SM 322, Isolated 16 DO, 120/230 V AC, 1 A, 1x 20-poleShow prices

6ES7322-1FL00-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 32 DO, 120 V/230 V AC, 1 A, double-width, 2x 20-pole

6ES7322-1HF01-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO (relay), 1x 20-pole, 24 V DC, 2 A or 230 V AC, 2AShow prices

6ES7322-1HF10-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO (relay), 1x 40-pole, 24 V DC, 5 A or 230 V AC, 5 A, connectors with spring-loaded terminal can be used as of 6ES7392-1BM01-0AA0Show prices

6ES7322-1HH01-0AA0

SIMATIC S7-300, Digital output SM 322, Isolated 16 DO, relay contacts, 1x 20-poleShow prices

6ES7322-5FF00-0AB0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 120/230 V AC, 2A, with single rooting/channel and selectable failure mode, 1x 40-poleShow prices

6ES7322-5GH00-0AB0

SIMATIC S7-300, Digital output SM 322, isolated, 16 DO (solid-state relay), 24-48 V AC/DC; 0.5 A with single rooting, 1x 40-poleShow prices

6ES7322-5HF00-0AB0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO (relay), 1x 40-pole, 24 V DC, 120-230 V AC, 5 A with RC filter overvoltage protectionShow prices

6ES7322-8BF00-0AB0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 24 V DC, 0.5A (1x 8 DO), Short-circuit protection diagnostics, 1x 20-pole

SM 323/SM 327 digital input/output modules

6ES7323-1BH01-0AA0

SIMATIC S7-300, Digital module SM 323, isolated, 8DI and 8DO, 24 V DC, 0.5 A Total current 2A, 1x 20-poleShow prices

6ES7323-1BL00-0AA0

SIMATIC S7-300, Digital module SM 323, isolated, 16 DI and 16 DO, 24 V DC, 0.5 A, Total current 4A, 1x 40-poleShow prices

6ES7327-1BH00-0AB0

SIMATIC S7-300, Digital module SM 327, isolated, 8DI and 8DX, 24 V DC, 0.5 A 1x 20-pole; 8DX by individual channels Can be parameterized as DI or DO

SIPLUS S7-300 digital modules
SIPLUS S7-300 SM 321

6AG1321-1BH02-2AA0

SIPLUS S7-300 SM 321-20-pole -40...+70 °C With conformal coating based on 6ES7321-1BH02-0AA0 . Digital input Isolated 16 DI, 24 V DC, 1x 20-poleShow prices

6AG1321-1BL00-2AA0

SIPLUS S7-300 SM 321-40-pole -40...+70 °C With conformal coating based on 6ES7321-1BL00-0AA0 . Digital input Isolated 32 DI, 24 V DC, 1x 40-poleShow prices

6AG1321-1CH20-2AA0

SIPLUS S7-300 SM 321 -25...+70 °C With conformal coating based on 6ES7321-1CH20-0AA0 . Digital input Isolated 16 DI, 48-125 V DC, 1x 20-poleShow prices

6AG1321-1FF01-2AA0

SIPLUS S7-300 SM 321-20-pole -40...+70 °C With conformal coating based on 6ES7321-1FF01-0AA0 . Digital input Isolated 8 DI, 120 V/230 V ACShow prices

6AG1321-1FF10-7AA0

SIPLUS S7-300 SM321 8DI/120/230 -25...+70°C with conformal coating based on 6ES7321-1FF10-0AA0 . Digital input isolated, 8 DI, 120 V/230 V AC, 1x 40-pole, with single rooting/channelShow prices

6AG1321-1FH00-7AA0

SIPLUS S7-300 SM321 16DE/120/23 -40...+70°C with conformal coating based on 6ES7321-1FH00-0AA0 . Digital input isolated 16 DI, 120/230 V AC, 1x 20-poleShow prices

6AG1321-7BH01-2AB0

SIPLUS S7-300 SM 321-20-pole -25...+70 °C With conformal coating based on 6ES7321-7BH01-0AB0 . Digital input Isolated "16 DI; 24 V DC, 1x 20-pole" Process interrupt, diagnostics, suitable for isochr. modeShow prices

6AG1321-7TH00-4AB0

SIPLUS PCS 7 SM 321 16DI for medial exposure with conformal coating based on 6ES7321-7TH00-0AB0 . Digital "input ""16 DI; 24 V DC, 1x" "40-pole,"" diagnostics-capable," for contacts (wired/ not wired), NAMUR encoder, 3/4-wire "BERO, with chatter ""monitoring;" "Pulse"" extension, Open-circuit" detection Connection IM 153-2 requiredShow prices

SIPLUS S7-300 SM 322

6AG1322-1BF01-2XB0

SIPLUS S7-300 SM 322 (-1BF01) -25...+70°C with conformal coating based on 6ES7322-1BF01-0AA0. Digital output SM 322, isolated, 8 DO, 24 V DC, 2A, 1x 20-poleShow prices

6AG1322-1BH01-2AA0

SIPLUS S7-300 SM 322-20-pole -25...+70 °C With conformal coating based on 6ES7322-1BH01-0AA0 . Digital output Isolated 16 DQ, 24 V DC, 0.5 A, total current 4 A/group (8 A/module)Show prices

6AG1322-1BL00-2AA0

SIPLUS S7-300 SM 322 32 DQ 40-pole -25...+70 °C With conformal coating based on 6ES7322-1BL00-0AA0 . Digital output Isolated, 32 DQ, 24 V DC, 0.5 A, 1x 40-pole, total current 4 A/group (16 A/module)Show prices

6AG1322-1CF00-7AA0

SIPLUS S7-300 SM 322 8DO 48-125V -25...+70°C with conformal coating based on 6ES7322-1CF00-0AA0 . Digital output isolated, 8 DO, 48-125 V DC, 1.5A, 1x 20-poleShow prices

6AG1322-1FF01-7AA0

SIPLUS S7-300 SM 322 8DO 120/ 220 -40...+70°C with conformal coating based on 6ES7322-1FF01-0AA0 . Digital output isolated, 8 DO, 120/230 V AC, 1 A, 1x 20-poleShow prices

6AG1322-1FH00-7AA0

SIPLUS S7-300 SM 322 16DO -40...+70°C with conformal coating based on 6ES7322-1FH00-0AA0 . Digital output Isolated 16 DO, 120/230 V AC, 1 A, 1x 20-poleShow prices

6AG1322-1HF10-2AA0

SIPLUS S7-300 SM 322-40-pole -25...+60 °C With conformal coating based on 6ES7322-1HF10-0AA0 . Digital output Isolated 8 DQ (relay), 1x 40-pole, 24 V DC, 5 A or 230 V AC, 5 A, connectors with spring-loaded terminal can be used as of 6ES7392-1BM01-0AA0Show prices

6AG1322-1HH01-2AA0

SIPLUS S7-300 SM 322-20-pole -40...+70 °C With conformal coating based on 6ES7322-1HH01-0AA0 . Digital output optically isolated 16 DQ, relay contactsShow prices

6AG1322-5FF00-4AB0

SIPLUS S7-300 SM 322 8DO with conformal coating based on 6ES7322-5FF00-0AB0 . Digital output isolated, 8 DO, 120/230 V AC, 2A, with single rooting/channel and selectable failure mode, 1x 40-poleShow prices

6AG1322-5HF00-4AB0

SIPLUS S7-300 SM 322 8RO 40pol with conformal coating based on 6ES7322-5HF00-0AB0 . Digital output isolated, 8 DO (relay), 1x 40-pole, 24 V DC, 120-230 V AC, 5 A with RC filter overvoltage protection

6AG1322-8BF00-2AB0

SIPLUS S7-300 SM 322-20-pole -25...+60 °C based on 6ES7322-8BF00-0AB0

SIPLUS S7-300 SM 323

6AG1323-1BH01-2AA0

SIPLUS S7-300 SM 323-20-pole -40...+70 °C With conformal coating based on 6ES7323-1BH01-0AA0 . Digital module Isolated 8 DI and 8 DQ, 24 V DC, 0.5 A Total current 2 A

Analog modules
SM 331 analog input modules

6ES7331-1KF02-0AB0

SIMATIC S7-300, Analog input SM 331, Isolated 8 AI, resolution 13 bits U/I/resistor/Pt100, NI100, NI1000, LG-NI1000, PTC/KTY, 66 ms conversion time; 1x 40-poleShow prices

6ES7331-7HF01-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI, resolution 14 bit, 0.052 ms/channel current, Voltage alarm, diagnostics, 1x 20-pole, suitable for isochronous mode Improved bus cycle time for isochronous modeShow prices

6ES7331-7KB02-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 2 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole, Removing/inserting with active backplane busShow prices

6ES7331-7KF02-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole Removing/inserting with active backplane busShow prices

6ES7331-7NF00-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI; +/-5/10V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit (55ms), Single rooting (50 V COM.), 1x 40-poleShow prices

6ES7331-7NF10-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI; +/-5/10V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit, Single rooting (60 V COM.), 4-channel operation: 10 ms, 8-channel operation: 23-95ms, 1x 40-poleShow prices

6ES7331-7PE10-0AB0

SIMATIC S7-300, Analog input SM 331, single channel Isolated 250 V AC, 6 AI thermocouples Type B, E, J, K, L, N, R, S, T Voltage: +/-25MV to +/-1V 16 bit, 50ms, 1x 40-poleShow prices

6ES7331-7PF01-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 2/3/4-wire, 8 AI, Resistor, Pt100/200/1000 NI100/120/200/500/1000, CU10, characteristics according to GOST 16 (internal 24) bit, 50ms, 1x 40-poleShow prices

6ES7331-7PF11-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI thermocouples Type B, E, J, K, L, N, R, S, T TXK/TXK (L) according to GOST 16 bit, 50ms, 1x 40-pole

SM 332 analog output modules

6ES7332-5HB01-0AB0

SIMATIC S7-300, Analog output SM 332, isolated, 2 AO, U/I; resolution 11/12 bits, 20-pole, Removing/inserting with active backplane bus possibleShow prices

6ES7332-5HD01-0AB0

SIMATIC S7-300, Analog output SM 332, isolated, 4 AO, U/I; diagnostics; resolution 11/12 bits, 20-pole, removing and inserting possible with active backplane busShow prices

6ES7332-5HF00-0AB0

SIMATIC S7-300, Analog output SM 332, isolated, 8 AO, U/I; diagnostics; resolution 11/12 bits, 40-pole, removing and inserting possible with active backplane busShow prices

6ES7332-7ND02-0AB0

SIMATIC S7-300, Analog output SM 332, isolated by channel, 4 AI, Resolution 16 bit, 0-10 V, 1-5 V, +/-10 V, +/-20 mA, 0/4-20mA, 20-pole, suitable for isochronous mode improved bus cycle times for the isochronous mode

SM 334 analog input/output modules

6ES7334-0CE01-0AA0

SIMATIC S7-300, Analog module SM 334, Non-isolated 4 AI/2 AO, 1x 20-pole, Removing and inserting possible with active backplane busShow prices

6ES7334-0KE00-0AB0

SIMATIC S7-300, Analog module SM 334, isolated, 4 AI/2 AO, 12 bit, 0-10 V f. Pt100 (climatic range -120-155 degrees) and 10 kOhm measuring range, 1x 20-pole

SIPLUS S7-300 analog modules
SIPLUS S7-300 SM 331

6AG1331-1KF02-7AB0

SIPLUS S7-300 SM331 8AE -25 ... +70°C with conformal coating based on 6ES7331-1KF02-0AB0 . OPTICALLY ISOLATED, 8 AI, 13 BIT RESOLUTION, U/I/RESISTANCE/PT100, NI100, NI1000, LG-NI1000, PTC / KTY, 66 MS MODULE UPDATE, 1 X 40 PINShow prices

6AG1331-7KB02-2AB0

SIPLUS S7-300 SM 331-20-pole -25...+70°C with conformal coating based on 6ES7331-7KB02-0AB0 . Analog input isolated 2 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole, Removing/inserting with active backplane busShow prices

6AG1331-7KF02-2AB0

SIPLUS S7-300 SM 331 20-pole -25...+70 °C With conformal coating Based on 6ES7331-7KF02-0AB0 . Analog input isolated 8 AI, resol. 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole Removing/inserting with active backplane busShow prices

6AG1331-7NF00-2AB0

SIPLUS S7-300 SM 331 40-pole -25...+70 °C With conformal coating based on 6ES7331-7NF00-0AB0 . Analog input isolated "8 AI; +/-5/10 V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit (55 ms), single rooting (50 V com.)Show prices

6AG1331-7NF10-2AB0

SIPLUS S7-300 SM 331 8AI 40-pole -25...+60°C with conformal coating based on 6ES7331-7NF10-0AB0 . Analog "input isolated, ""8 AI; +/-5/10" V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit, Single rooting (60 V COM.), 4-channel operation: 10 ms, 8-channel operation: 23-95ms, 1x 40-poleShow prices

6AG1331-7PF01-4AB0

SIPLUS S7-300 SM 331 8AI with conformal coating based on 6ES7331-7PF01-0AB0 . Analog input isolated, 2/3/4-wire, 8 AI, Resistor, Pt100/200/1000 NI100/120/200/500/1000, CU10, characteristics according to GOST 16 (internal 24) bit, 50ms, 1x 40-poleShow prices

6AG1331-7PF11-4AB0

SIPLUS S7-300 SM 331 8AI 40-pole with conformal coating based on 6ES7331-7PF11-0AB0. Analog input isolated, 8 AI thermocouples Type B, E, J, K, L, N, R, S, T TXK/TXK (L) according to GOST 16 bit, 50ms, 1x 40-pole

SIPLUS S7-300 SM 332

6AG1332-5HB01-2AB0

SIPLUS S7-300 SM 332-20-pole -25...+70 °C With conformal coating based on 6ES7332-5HB01-0AB0 . Analog output Isolated, "2 AQ, U/I; Resolution 11/12 bit 20-pole, removing/inserting with active backplane bus possibleShow prices

6AG1332-5HD01-7AB0

SIPLUS S7-300 SM 332 4AO U/I -25...+70°C with conformal coating based on 6ES7332-5HD01-0AB0 . Analog "output SM 332, isolated, ""4 AO," "U/I; diagnostics;"" resolution" 11/12 bits, 20-pole, removing and inserting possible with active backplane busShow prices

6AG1332-5HF00-2AB0

SIPLUS S7-300 SM332 40POLE -25...+70°C with conformal coating based on 6ES7332-5HF00-0AB0 . ANALOG OUTPUT OPTICALLY ISOLATED, 8 "AO, U/I; DIAGNOSTICS;" RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUSShow prices

6AG1332-7ND02-4AB0

SIPLUS S7-300 SM 332 4AO with conformal coating based on 6ES7332-7ND02-0AB0 . Analog output isolated by channel, 4 AI, Resolution 16 bit, 0-10 V, 1-5 V, +/-10 V, +/-20 mA, 0/4-20mA, 20-pole, suitable for isochronous mode operation improved bus cycle times for+ the isochronous mode

SIPLUS S7-300 SM 334

6AG1334-0KE00-7AB0

SIPLUS S7-300 SM 334 4AI 2AO -25...+70°C with conformal coating based on 6ES7334-0KE00-0ab0 . Analog module isolated, 4 AI/2 AO, 12 bit, 0-10 V for Pt100 (climatic range -120-155°C) and 10 kOhm measuring range, 1x 20-pole

Analog modules with HART
Analog input module with HART

6ES7331-7TF01-0AB0

SIMATIC DP, HART analog input SM 331, 8 AI, 0/4 - 20 mA HART, for ET200M with IM153-2, 1 x 20-pole, Functions: FW update, HART auxiliary variables, redundancy, local diagnostic buffer with time stamping,

Analog output module with HART

6ES7332-8TF01-0AB0

SIMATIC DP, HART analog output, SM 332, 8 AO, 0/4 - 20 mA HART, for ET200M with IM153-2, IM 153-2, 20-pole Functions: FW update, HART auxiliary variables, redundancy, local diagnostic buffer with time stamping,

Ex-analog input module with HART

6ES7331-7TB10-0AB0

SIMATIC DP, HART analog input SM 331, 2 AI, 0/4 - 20 mA HART, as of HART Rev. 5.0, for ET200M with IM 153-2, 1 x 20-pole

Ex-analog output module with HART

6ES7332-5TB10-0AB0

SIMATIC DP, HART analog output, SM 332, 2 AO, 0/4 - 20 mA HART, as of HART Rev. 5.0, for ET200M with IM 153-2, 1 x 20-pole

SIPLUS analog modules with HART
SIPLUS S7-300 analog input module with HART

6AG1331-7TF01-7AB0

SIPLUS SM 331 AI 8x0/4...20 mA -25...+70°C with conformal coating based on 6ES7331-7TF01-0AB0

SIPLUS S7-300 analog output module with HART

6AG1332-8TF01-2AB0

SIPLUS S7-300 SM 332 8AO HART -25...+60°C with conformal coating based on 6ES7332-8TF01-0AB0 . Analog output 8 AO 0/4-20 mA HART, for ET 200M with IM 153-2, IM 153-2, 20-pole Functions: FW update, HART auxiliary variables, redundancy, local diagnostic buffer with time stamping, Requirement: PCS 7 V7.0, SP1

SIPLUS S7-300 Ex analog input module with HART

6AG1331-7TB00-7AB0

SIPLUS DP SM 331 2AE HART -25...+70 °C with conformal coating based on 6ES7331-7TB00-0AB0

F-digital/analog modules
SM 326 F-digital input modules - Safety Integrated

6ES7326-1BK02-0AB0

SIMATIC S7, Digital input SM 326, F-DI 24x24 V DC, Fail-safe digital input for SIMATIC S7 F-systems with diagnostic alarm, up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1x 40-poleShow prices

6ES7326-1RF01-0AB0

SIMATIC S7, Digital input SM 326, 8 DI; 24 V DC, NAMUR, fail-safe NAMUR input for SIMATIC S7 F-systems, up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1x 40-pole

SM 326 F-digital output modules - Safety Integrated

6ES7326-2BF10-0AB0

SIMATIC S7, digital output SM 326, F-DO10x 24 V DC/2A PP, fail-safe digital output for SIMATIC S7F systems, with diagnostic alarm, LVV, up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1x 40-poleShow prices

6ES7326-2BF41-0AB0

SIMATIC S7, Digital output SM 326, F-DO 8x24 V DC/2A PM fail-safe digital output Switching to P-M potential up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1x 40-pole

SM 336 F-analog input modules - Safety Integrated

6ES7336-4GE00-0AB0

SIMATIC S7, Analog input SM 336, 6 AI; 15 bit; fail-safe analog inputs for SIMATIC Safety, with HART support, up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1x 20-pole

Safety protector

6ES7195-7KF00-0XA0

SIMATIC S7, Safety protector between F and standard modules With redundant ET 200M interface modules, use only with partition

SIPLUS S7-300 F-digital/analog modules
SIPLUS S7-300 SM 326 - Safety Integrated

6AG1326-1BK02-2AB0

SIPLUS S7-300 SM 326F DI24 40-pole -25...+60°C (70°C with forced convection) with conformal coating based on 6ES7326-1BK02-0AB0 . Digital input F-DI 24x24 V DC Fail-safe digital input for SIMATIC S7 F-systems with diagnostic alarmShow prices

6AG1326-1RF01-4AB0

SIPLUS S7-300 SM 326F DI8 NAMUR for medial exposure with conformal coating based on 6ES7326-1RF01-0AB0 . Digital "input ""SM 326, 8 DI; 24 V DC," "NAMUR,"" fail-safe NAMUR input" for SIMATIC S7 F-systems, up to Category 4 (EN 954-1)/ SIL3 (IEC 61508)/PLE (ISO 13849), 1x 40-pole

SIPLUS S7-300 SM 326 - Safety Integrated

6AG1326-2BF10-2AB0

SIPLUS S7-300 SM 326 10F-DO -25...+60°C (70°C with forced convection) with conformal coating based on 6ES7326-2BF10-0AB0 . Digital output 24 V DC/2A PP, fail-safe digital output for SIMATIC S7F systems, with diagnostic alarm, LVV, 1x 40-poleShow prices

6AG1326-2BF41-2AB0

SIPLUS S7-300 SM 326F DO8 -25...+60°C with conformal coating based on 6ES7326-2BF41-0AB0 . Digital output F-DO 8x 24 V DC/2A PM fail-safe digital output Sinking-sourcing up to Category 4 (EN 954-1), SIL 3 (IEC 61508)

SIPLUS S7-300 SM 336 - Safety Integrated

6AG1336-4GE00-2AB0

SIPLUS S7-300 SM336 F 6AI 15 bit -25...+60 °C (70 °C with forced convection) With conformal coating Based on 6ES7336-4GE00-0AB0 . Fail-safe analog inputs For SIMATIC Safety, with HART support, up to Category 4 (EN 954-1) /SIL3 (IEC 61508)/ PLE (ISO 13849), 1x 20-pole

SIPLUS S7-300 safety protector

6AG1195-7KF00-2XA0

SIMATIC S7-300 safety protector -25...+60°C with conformal coating based on 6ES7195-7KF00-0XA0 . Safety protector between F and standard modules With redundant ET 200M interface modules, use only with partition

Ex digital modules
Ex digital input modules

6ES7321-7RD00-0AB0

SIMATIC S7, digital input SM 321, isolated, 4 DI; 24 V DC, NAMUR/DIN 19234, for signals from the hazardous area, diagnostics-capable, PTB tested

Ex digital output modules

6ES7322-5RD00-0AB0

SIMATIC S7, digital output SM 322, isolated, 4 DO, 15 V / 20 mA 1 x 20-pole, for signals from the hazardous area, diagnostics-capable, PTB testedShow prices

6ES7322-5SD00-0AB0

SIMATIC S7, digital output SM 322, isolated, 4 DO, 24 V DC, 10 mA, 1 x 20-pole, for signals from the hazardous area, diagnostics-capable, PTB tested

Ex analog modules
Ex analog input modules

6ES7331-7RD00-0AB0

SIMATIC S7, analog input SM 331, isolated, 4 AE; 0/4 to 20 mA, 1 x 20-pole, for signals from the hazardous area, diagnostics-capable, PTB testedShow prices

6ES7331-7SF00-0AB0

SIMATIC S7, analog input SM 331, isolated, 8 AI thermocouples/4 AI Pt100, for signals from the hazardous area, diagnostics-capable, PTB tested 1 x 20-pole

Ex analog output modules

6ES7332-5RD00-0AB0

SIMATIC S7, analog output SM 332, isolated, 4 AA; 0/4 to 20 mA, 20-pole, for signals from the hazardous area, diagnostics-capable, PTB tested

Function modules
FM 350-1 counter module

6ES7350-1AH03-0AE0

SIMATIC S7-300, Counter module FM 350-1 for S7-300, Counter functions up to 500 kHz 1 channel for connection of 5 V and 24 V incremental encoders Isochronous mode; Measuring range types incl. configuration package on CD

FM 350-2 counter module

6ES7350-2AH01-0AE0

SIMATIC S7-300, Counter module FM 350-2, 8 channels, 20 kHz, 24 V encoder for counting, frequency measurement, speed measurement, period duration measurement, dosing incl. configuration package and electronic documentation on CD-ROM

FM 351 positioning module

6ES7351-1AH02-0AE0

SIMATIC S7-300, positioning module FM 351 for rapid/slow traverse Drives incl. configuration package on CD

FM 352 cam controllers

6ES7352-1AH02-0AE0

SIMATIC S7-300, cam controller, FM 352, electronic incl. configuration package on CD

FM 352-5 high-speed Boolean processor

6ES7352-5AH01-0AE0

SIMATIC S7-300, FM352-5 with NPN output, High Speed Boolean Processor, for high-speed linking, 12 DI, 8 DO, 1 encoder interface for RS422 incr./SSI encoderShow prices

6ES7352-5AH11-0AE0

SIMATIC S7-300, FM352-5 with PNP output, High Speed Boolean Processor, for high-speed linking, 12 DI, 8 DO, 1 encoder interface for RS422 incr./SSI encoder

FM 355 controller module

6ES7355-0VH10-0AE0

SIMATIC S7-300, Control Unit FM 355 C, 4 channels, continuous, 4 AI+8 DI+4 AO incl. multi-language configuration package, Manual and Getting Started (de, de, fr, en fr, it) on CD-ROMShow prices

6ES7355-1VH10-0AE0

SIMATIC S7-300, Control Unit FM 355 S, 4 channels, Step and pulse, 4 AI+8 DI+8 DO incl. multi-language configuration package, Manual and Getting Started (de, de, fr, en fr, it) on CD-ROM

FM 355-2 temperature controller module

6ES7355-2CH00-0AE0

SIMATIC S7-300, temperature Control Unit FM 355-2 C, 4 channels, continuous, 4 AI+8 DI+4 AO incl. multi-language configuration package, Manual and Getting Started (de, de, fr, en it) on CD-ROMShow prices

6ES7355-2SH00-0AE0

SIMATIC S7-300, temperature Control Unit FM 355-2S, 4 channels, Step and pulse, 4 AI+8 DI+8 DO incl. multi-language configuration package, Manual and Getting Started (de, de, fr, en it) on CD-ROM

SM 338 POS input module

6ES7338-4BC01-0AB0

SIMATIC S7-300, Signal module for 3 SSI encoders for reading in the position value with 2 FREEZE inputs, 1x 20-pole Supports isochronous mode

SIPLUS function modules
SIPLUS S7-300 FM 350-1

6AG1350-1AH03-2AE0

SIPLUS S7-300 FM350-1 -25...+60 °C with conformal coating based on 6ES7350-1AH03-0AE0. Counter module Counter functions up to 500 kHz 1 channel for connection of 5 V and 24 V incremental encoders "Isochronous mode; Measuring" range types incl. configuration package auf CD-ROM

SIPLUS S7-300 FM 350-2

6AG1350-2AH01-4AE0

SIPLUS S7-300 FM350-2 8 channels for medial exposure with conformal coating based on 6ES7350-2AH01-0AE0 . Counter module FM 350-2, 8 channels, 20 kHz, 24 V encoder for counting, frequency measurement, speed measurement, period duration measurement, dosing incl. configuration package and Electronic documentation on CD-ROM

SIPLUS SIWAREX U

6AG1950-2AA01-4AA0

SIPLUS SIWAREX U electronic weighing system for medial exposure based on 7MH4950-2AA01

Special modules
SM 374 simulator

6ES7374-2XH01-0AA0

SIMATIC S7-300, Simulator module SM 374, for simulation of 16 inputs or 16 outputs or 8 inputs and 8 outputs 16 switches, 16 LEDs

DM 370 dummy module

6ES7370-0AA01-0AA0

SIMATIC S7-300, dummy module DM 370, Dummy module Use for module replacement

Communication
CP 340

6ES7340-1AH02-0AE0

SIMATIC S7-300, CP 340 Communications processor with RS232C interface (RS-232-C) incl. configuration package on CDShow prices

6ES7340-1BH02-0AE0

SIMATIC S7-300, CP 340 Communications processor with 20 mA interface (TTY) incl. configuration package on CDShow prices

6ES7340-1CH02-0AE0

SIMATIC S7-300, CP 340 Communications processor with RS 422/485 interface incl. configuration package on CD

CP 341

6ES7341-1AH02-0AE0

SIMATIC S7-300, CP 341 Communications processor with RS232C interface (RS-232-C) incl. configuration package on CDShow prices

6ES7341-1BH02-0AE0

SIMATIC S7-300, CP 341 Communications processor with 20 mA interface (TTY) incl. configuration package on CDShow prices

6ES7341-1CH02-0AE0

SIMATIC S7-300, CP 341 Communications processor with RS422/485 interface incl. configuration package on CD

ASM 475

6GT2002-0GA10

MOBY communication module ASM475 for SIMATIC S7 300 and ET200M parameterizable (without front connector)

SIPLUS S7-300 communication
SIPLUS S7-300 CP 340

6AG1340-1AH02-2AE0

SIPLUS S7-300 CP 340 RS232 -25...+70°C based on 6ES7340-1AH02-0AE0 . Communications processor with RS232C interface (RS-232-C) incl. configuration package auf CD-ROMShow prices

6AG1340-1CH02-2AE0

SIPLUS S7-300 CP 340 RS422/485 -25...+60°C conformal coating based on 6ES7340-1CH02-0AE0. Communications processor with RS 422/485 interface incl. configuration package auf CD-ROM

SIPLUS S7-300 CP 341

6AG1341-1AH02-7AE0

SIPLUS S7-300, CP 341 -25...+70 °C with conformal coating based on 6ES7341-1AH02-0AE0 . Communications processor with RS232C interface (RS-232-C) incl. configuration package auf CD-ROMShow prices

6AG1341-1CH02-7AE0

SIPLUS S7-300 CP 341 RS422/485 -25...+70°C with conformal coating based on 6ES7341-1CH02-0AE0

SIPLUS S7-300 CP 343-1 Lean

6AG1343-1CX10-2XE0

SIPLUS NET CP 343-1 Lean -25...+60°C with conformal coating based on 6GK7343-1CX10-0XE0 . Communications processor for connection of SIMATIC S7-300 to Ind. Ethernet via TCP/IP and UDP, MULTICAST, Send/Receive with and without RFC1006, fetch/ write, S7 communication (server) PROFINET IO device integrated 2-port switch ERTEC 200, Size exchange without PG, SNMP diagnostics, Initialization via LAN, 2x RJ45 connection for LAN with 10/100 Mbit/sShow prices

SIPLUS S7-300 CP 343-1

6AG1343-1EX30-7XE0

SIPLUS NET CP 343-1 -25...+70 °C with conformal coating based on 6GK7343-1EX30-0XE0 . Communications processor for connection of SIMATIC S7-300 to Industrial Ethernet via ISO and TCP/IP, PROFINET IO controller or PROFINET IO device, Integrated 2-port switch ERTEC 200, S7 communication, fetch/write, Send/Receive with and without RFC1006, MULTICAST DHCP, NTC-CPU Sync, diagnostics, initialization via LAN, 2x RJ45 connection for LAN with 10/100 Mbit/s

SIPLUS S7-300 CP 343-1 Advanced

6AG1343-1GX31-4XE0

SIPLUS NET CP 343-1 Advanced with conformal coating based on 6GK7343-1GX31-0XE0 . for connection of the SIMATIC "S7-300 CPU to Ind. Ethernet;" PROFINET IO controller and/or "IO Device; RT and RT and IRT" "IRT, MRP, PROFINET CBA; TCP/IP" ISO, UDP, S7 COM, S5-comp. com., (send/receive) with Fetch/Write with and without RFC 1006, MULTICAST Diagnostic extension,SNMP,DHCP, FTP client/server, e-mail, Gigabit-SS1X RJ45 (10/100/1000) PROFINET-SS 2x RJ45(10/100 "Mbit) ""PROFINET CBA; security""" "(firewall/VPN); PROFIenergy"

Connection system
Front connectors

6ES7392-1AJ00-0AA0

SIMATIC S7-300, Front connector for signal modules with screw contacts, 20-poleShow prices

6ES7392-1AJ00-1AB0

SIMATIC S7-300, Front connector for signal modules with screw contacts, 20-pole, 100 units per packing unitShow prices

6ES7392-1AM00-0AA0

SIMATIC S7-300, Front connector with screw contacts, 40-poleShow prices

6ES7392-1AM00-1AB0

SIMATIC S7-300, Front connector with screw contacts, 40-pole, 100 units per packing unitShow prices

6ES7392-1BJ00-0AA0

SIMATIC S7-300, Front connector for signal modules with spring-loaded contacts, 20-poleShow prices

6ES7392-1BJ00-1AB0

SIMATIC S7-300, Front connector for signal modules with spring-loaded contacts, 20-pole 100 units per packing unitShow prices

6ES7392-1BM01-0AA0

SIMATIC S7-300, Front connector for signal modules with spring-loaded contacts, 40-poleShow prices

6ES7392-1BM01-1AB0

SIMATIC S7-300, Front connector for signal modules with spring-loaded contacts, 40-pole 100 units per packing unit

System cabling for SIMATIC S7-300 and ET 200M
Fully modular connection
Front connector modules

6ES7921-3AA00-0AA0

Front connector module with flat ribbon Cable connection for digital 16 I/O modules of the S7-300, Power supply over Spring terminalsShow prices

6ES7921-3AA20-0AA0

Front connector module with flat ribbon Cable connection for digital 32 I/O modules of the S7-300, Power supply over Spring terminalsShow prices

6ES7921-3AB00-0AA0

Front connector module with flat ribbon Cable connection for digital 16 I/O modules of the S7-300, Power supply over Screw terminalShow prices

6ES7921-3AB20-0AA0

Front connector module with flat ribbon Cable connection for digital 32 I/O modules of the S7-300, Power supply over Screw terminalsShow prices

6ES7921-3AC00-0AA0

Front connector module with flat ribbon Cable connection for 2 A Digital output modules Power supply over Spring terminalsShow prices

6ES7921-3AD00-0AA0

Front connector module with flat ribbon Cable connection for 2 A Digital output modules Power supply over Screw contactsShow prices

6ES7921-3AF00-0AA0

Front connector module with flat ribbon Cable connection for analog Modules of the S7-300, Power supply over Spring terminalsShow prices

6ES7921-3AF20-0AA0

Front connector module with flat ribbon Cable connection for analog (40 pins) Modules of the S7-300 Power supply over Spring terminalsShow prices

6ES7921-3AG00-0AA0

Front connector module with flat ribbon Cable connection for analog Modules of the S7-300, Power supply over Screw terminalsShow prices

6ES7921-3AG20-0AA0

Front connector module with flat ribbon Cable connection for analog (40 pins) Modules of the S7-300 Power supply over Screw terminals

6ES7921-3AK20-0AA0

Front connector module with flat ribbon Cable connection for compact CPU 312C for connection X1 Power supply over Screw terminalsShow prices

6ES7921-3AM20-0AA0

Front connector module with flat ribbon Cable connection for compact CPU 313C/314C-2PTP/314C-2DP for connection X1 Power supply over Screw terminals

Connecting cables

6ES7923-0BA50-0CB0

Connecting cable unshielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14mm2 with IDC connectors, L = 0.5 mShow prices

6ES7923-0BB00-0CB0

Connecting cable unshielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14mm2 with IDC connectors, L = 1.0 mShow prices

6ES7923-0BB00-0DB0

Connecting cable shielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14mm2 with IDC connectors, L = 1.0 mShow prices

6ES7923-0BB50-0CB0

Connecting cable unshielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 1.5 mShow prices

6ES7923-0BC00-0CB0

Connecting cable unshielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 2.0 mShow prices

6ES7923-0BC00-0DB0

Connecting cable shielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 2.0 mShow prices

6ES7923-0BC50-0CB0

Connecting cable unshielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 2.5 mShow prices

6ES7923-0BC50-0DB0

Connecting cable shielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 2.5 mShow prices

6ES7923-0BD00-0CB0

Connecting cable unshielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 3.0 mShow prices

6ES7923-0BD00-0DB0

Connecting cable shielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 3.0 m

6ES7923-0BE00-0CB0

Connecting cable unshielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 4.0 mShow prices

6ES7923-0BE00-0DB0

Connecting cable shielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 4.0 mShow prices

6ES7923-0BF00-0CB0

Connecting cable unshielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 5.0 mShow prices

6ES7923-0BF00-0DB0

Connecting cable shielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 5.0 mShow prices

6ES7923-0BG50-0CB0

Connecting cable unshielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 6.5 mShow prices

6ES7923-0BG50-0DB0

Connecting cable shielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 6.5 mShow prices

6ES7923-0BJ00-0CB0

Connecting cable unshielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 8.0 mShow prices

6ES7923-0BJ00-0DB0

Connecting cable shielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 8.0 mShow prices

6ES7923-0CB00-0CB0

Connecting cable unshielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 10.0 mShow prices

6ES7923-0CB00-0DB0

Connecting cable shielded for SIMATIC S7-300/1500 between front connector module and Connection module 16x0.14 mm2 with IDC connectors, Length = 10.0 m

6ES7923-5BA50-0EB0

Connecting cable unshielded f. SIMATIC S7-300/1500 0.14 mm2 between front connector module 4 x 16 pole and connection module 1 x 50 pole with IDC connectors, L = 0.5 mShow prices

6ES7923-5BB00-0EB0

Connecting cable unshielded f. SIMATIC S7-300/1500 0.14 mm2 between front connector module 4 x 16 pole and connection module 1 x 50 pole with IDC connectors, L = 1.0 mShow prices

6ES7923-5BB50-0EB0

Connecting cable unshielded f. SIMATIC S7-300/1500 0.14 mm2 between front connector module 4 x 16 pole and connection module 1 x 50 pole with IDC connectors, Length = 1.5 mShow prices

6ES7923-5BC00-0EB0

Connecting cable unshielded f. SIMATIC S7-300/1500 0.14 mm2 between front connector module 4 x 16 pole and connection module 1 x 50 pole with IDC connectors, L = 2.0 mShow prices

6ES7923-5BC50-0EB0

Connecting cable unshielded f. SIMATIC S7-300/1500 0.14 mm2 between front connector module 4 x 16 pole and connection module 1 x 50 pole with IDC connectors, L = 2.5 mShow prices

6ES7923-5BD00-0EB0

Connecting cable unshielded f. SIMATIC S7-300/1500 0.14 mm2 between front connector module 4 x 16 pole and connection module 1 x 50 pole with IDC connectors, L = 3.0 mShow prices

6ES7923-5BE00-0EB0

Connecting cable unshielded f. SIMATIC S7-300/1500 0.14 mm2 between front connector module 4 x 16 pole and connection module 1 x 50 pole with IDC connectors, L = 4.0 mShow prices

6ES7923-5BF00-0EB0

Connecting cable unshielded f. SIMATIC S7-300/1500 0.14 mm2 between front connector module 4 x 16 pole and connection module 1 x 50 pole with IDC connectors, L = 5.0 mShow prices

6ES7923-5BG50-0EB0

Connecting cable unshielded f. SIMATIC S7-300/1500 0.14 mm2 between front connector module 4 x 16 pole and connection module 1 x 50 pole with IDC connectors, L = 6.5 mShow prices

6ES7923-5BJ00-0EB0

Connecting cable unshielded f. SIMATIC S7-300/1500 0.14 mm2 between front connector module 4 x 16 pole and connection module 1 x 50 pole with IDC connectors, L = 8.0 m

6ES7923-5CB00-0EB0

Connecting cable unshielded f. SIMATIC S7-300/1500 0.14 mm2 between front connector module 4 x 16 pole and connection module 1 x 50 pole with IDC connectors, L = 10.0 m

Connection modules

6ES7924-0AA20-0AA0

Connection module TP1 8 channels u. 2x2 terminals f. Potential supply Type: Screw terminal without LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0AA20-0AC0

Connection module TP1 8 channels u. 2x2 terminals f. Potential supply Type: Push-in terminal without LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0AA20-0BA0

Connection module TP1 8 channels u. 2x2 terminals f. Potential supply Type: Screw terminal with LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0AA20-0BC0

Connection module TP1 8 channels u. 2x2 terminals f. Potential supply Type: Push-in terminal with LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0BB20-0AA0

Terminal block TP2 8 channels f. 2 A digital output and 2x6 multiplication terminals Type: Screw terminal without LED, VPE=1 unit 16 pole IDC connection for cableShow prices

6ES7924-0BB20-0AC0

Connection module TP2 8 channels f. 2 A digital output and 2x6 multiplication terminals Type: Push-in terminal without LED, VPE=1 unit 16 pole IDC connection for cableShow prices

6ES7924-0BD20-0BA0

Connection module TPRO with relay 24 V DC, Output 8 NO contacts 230V AC/3 A 30 V DC/3 A, Type: Screw terminal with LED, VPE=1 unit 16 pole IDC connection for cableShow prices

6ES7924-0BD20-0BC0

Connection module TPRO with relay 24 V DC, Output 8 NO contacts 230V AC/3 A 30 V DC/3 A, Type: Push-in terminal with LED, VPE=1 unit 16 pole IDC connection for cableShow prices

6ES7924-0BE20-0BA0

Connection module TPRI with relay 230 V AC, Output 8 NO contacts 24V DC/0.05 A Type: Screw terminal with LED, VPE=1 unit 16 pole IDC connection for cableShow prices

6ES7924-0BE20-0BC0

Connection module TPRI with relay 230 V AC, Output 8 NO contacts 24V DC/0.05 A Type: Push-in terminal with LED, VPE=1 unit 16 pole IDC connection for cable

6ES7924-0BF20-0BA0

Connection module TPOO w. optocoupler 24 V DC, Output 8 NO contacts 24V DC/4 A Overload and short circuit-proof, with LED Push-in terminal VPE = 1 unit 16 pole IDC connection for cableShow prices

6ES7924-0BF20-0BC0

Connection module TPOO with optocoupler 24 VDC, Output 8 NO contacts 24V DC/4 A Overload and short circuit-proof, with LED Push-in terminal VPE = 1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0BG20-0BA0

Connection module TPRI with relay 110 V AC, Output 8 NO contacts 24V DC/0.05 A Type: Screw terminal with LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0BG20-0BC0

Connection module TPRI with relay 110 V AC, Output 8 NO contacts 24V DC/0.05 A Type: Push-in terminal with LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0CA20-0AA0

Connection module TP3 8 channels u. 2x10 terminals f. Potential supply Type: Screw terminal without LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0CA20-0AC0

Connection module TP3 8 channels u. 2x10 terminals f. Potential supply Type: Push-in terminal without LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0CA20-0BA0

Connection module TP3 8 channels u. 2x10 terminals f. Potential supply Type: Screw terminal with LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0CA20-0BC0

Connection module TP3 8 channels u. 2x10 terminals f. Potential supply Type: Push-in terminal with LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0CC21-0AA0

Connection module TPA 3-tier for analog Modules of the SIMATIC S7-300 Type: Screw terminal without LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0CC21-0AC0

Connection module TPA 3-tier for analog Modules of the SIMATIC S7-300 Type: Push-in terminal without LED, VPE=1 unit 16 pole IDC connector f. cable

6ES7924-0CH20-0BA0

Connection module TP3 with isolating terminal per channel 8 channels and 2x10 terminals for Potential supply Type: Screw terminal with LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0CH20-0BC0

Connection module TP3 with isolating terminal per channel 8 channels and 2x10 terminals for Potential supply Type: Push-in terminal with LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0CL20-0BA0

Connection module TP3 with fuse per channel 8 channels and 2x10 terminals for Potential supply Type: Screw terminal with LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-0CL20-0BC0

Connection module TP3 with fuse per channel 8 channels and 2x10 terminals for Potential supply Type: Push-in terminal with LED, VPE=1 unit 16 pole IDC connector f. cableShow prices

6ES7924-2AA20-0AA0

Connection module TP1 32 channels a. 4x2 terminals f. Potential supply Type: Screw terminal without LED, VPE=1 unit 50 pole IDC connector f. cableShow prices

6ES7924-2AA20-0AC0

Connection module TP1 32 channels a. 4x2 terminals f. Potential supply Type: Push-in terminal without LED, VPE=1 unit 50 pole IDC connector f. cableShow prices

6ES7924-2AA20-0BA0

Connection module TP1 32 channels a. 4x2 terminals f. Potential supply Type: Screw terminal with LED, VPE=1 unit 50 pole IDC connector f. cableShow prices

6ES7924-2AA20-0BC0

Connection module TP1 32 channels a. 4x2 terminals f. Potential supply Type: Push-in terminal with LED, VPE=1 unit 50 pole IDC connector for cableShow prices

6ES7924-2CA20-0AA0

Connection module TP3 32 channels a. 2x33 terminals f. Potential supply Type: Screw terminal without LED, VPE=1 unit 50 pole IDC connector for cableShow prices

6ES7924-2CA20-0AC0

Connection module TP3 32 channels a. 2x33 terminals f. Potential supply Type: Push-in terminal without LED, VPE=1 unit 50 pole IDC connector for cable

6ES7924-2CA20-0BA0

Connection module TP3 32 channels a. 2x33 terminals f. Potential supply Type: Screw terminal with LED, VPE=1 unit 50 pole IDC connector for cableShow prices

6ES7924-2CA20-0BC0

Connection module TP3 32 channels a. 2x33 terminals f. Potential supply Type: Push-in terminal with LED, VPE=1 unit 50 pole IDC connector for cable

Configuration and wiring
Wiring of S7-300 analog modules
Wiring of S7-400 analog modules


Flexible connection
Front connector with single wires

6ES7922-3BC50-0AB0

Front connector for SIMATIC S7-300 20 pole (6ES7392-1AJ00-0AA0) with 20 single cores 0.5 mm2, Single cores H05V-K, Screw version VPE=1 unit L = 2.5 mShow prices

6ES7922-3BC50-0AC0

Front connector for SIMATIC S7-300 40 pole (6ES7392-1AM00-0AA0) with 40 single cores 0.5 mm2, Single cores H05V-K, Screw version VPE=1 unit L = 2.5 mShow prices

6ES7922-3BC50-0AF0

Front connector for SIMATIC S7-300 20 pole (6ES7921-3AH00-0AA0) with 20 single cores 0.5 mm2, Single cores H05V-K, Crimp version VPE=1 unit L = 2.5 mShow prices

6ES7922-3BC50-0AG0

Front connector for SIMATIC S7-300 40 pole (6ES7921-3AH20-0AA0) with 40 single cores 0.5 mm2, Single cores H05V-K, Crimp version VPE=1 unit L = 2.5 mShow prices

6ES7922-3BC50-5AB0

Front connector for SIMATIC S7-300 20 pole (6ES7392-1AJ00-0AA0) with 20 single cores 0.5 mm2, Single cores H05V-K, Screw version VPE=5 units L = 2.5 mShow prices

6ES7922-3BC50-5AC0

Front connector for SIMATIC S7-300 40 pole (6ES7392-1AM00-0AA0) with 40 single cores 0.5 mm2, Single cores H05V-K, Screw version VPE=5 units L = 2.5 mShow prices

6ES7922-3BD20-0AB0

Front connector for SIMATIC S7-300 20 pole (6ES7392-1AJ00-0AA0) with 20 single cores 0.5 mm2, Single cores H05V-K, Screw version VPE=1 unit L = 3.2 mShow prices

6ES7922-3BD20-0AC0

Front connector for SIMATIC S7-300 40 pole (6ES7392-1AM00-0AA0) with 40 single cores 0.5 mm2, Single cores H05V-K, Screw version VPE=1 unit L = 3.2 mShow prices

6ES7922-3BD20-0AF0

Front connector for SIMATIC S7-300 20 pole (6ES7921-3AH00-0AA0) with 20 single cores 0.5 mm2, Single cores H05V-K, Crimp version VPE=1 unit L = 3.2 mShow prices

6ES7922-3BD20-0AG0

Front connector for SIMATIC S7-300 40 pole (6ES7921-3AH20-0AA0) with 40 single cores 0.5 mm2, Single cores H05V-K, Crimp version VPE=1 unit L = 3.2 m

6ES7922-3BD20-0UB0

Front connector for SIMATIC S7-300 20 pole (6ES7392-1AJ00-0AA0) with 20 single cores AWG 20, Single cores UL / CSA AWM Style 1007/1569 FT2 TR64 Screw version VPE=1 unit L = 3.2 mShow prices

6ES7922-3BD20-0UC0

Front connector for SIMATIC S7-300 40 pole (6ES7392-1AM00-0AA0) with 40 single cores AWG 20, Single cores UL / CSA AWM Style 1007/1569 FT2 TR64 Screw version VPE=1 unit L = 3.2 mShow prices

6ES7922-3BD20-5AB0

Front connector for SIMATIC S7-300 20 pole (6ES7392-1AJ00-0AA0) with 20 single cores 0.5 mm2, Single cores H05V-K, Screw version VPE=5 units L = 3.2 mShow prices

6ES7922-3BD20-5AC0

Front connector for SIMATIC S7-300 40 pole (6ES7392-1AM00-0AA0) with 40 single cores 0.5 mm2, Single cores H05V-K, Screw version VPE=5 units L = 3.2 mShow prices

6ES7922-3BF00-0AB0

Front connector for SIMATIC S7-300 20 pole (6ES7392-1AJ00-0AA0) with 20 single cores 0.5 mm2, Single cores H05V-K, Screw version VPE=1 unit L = 5.0 mShow prices

6ES7922-3BF00-0AC0

Front connector for SIMATIC S7-300 40 pole (6ES7392-1AM00-0AA0) with 40 single cores 0.5 mm2, Single cores H05V-K, Screw version VPE=1 unit L = 5.0 mShow prices

6ES7922-3BF00-0AF0

Front connector for SIMATIC S7-300 20 pole (6ES7921-3AH00-0AA0) with 20 single cores 0.5 mm2, Single cores H05V-K, Crimp version VPE=1 unit L = 5.0 mShow prices

6ES7922-3BF00-0AG0

Front connector for SIMATIC S7-300 40 pole (6ES7921-3AH20-0AA0) with 40 single cores 0.5 mm2, Single cores H05V-K, Crimp version VPE=1 unit L = 5.0 mShow prices

6ES7922-3BF00-0UB0

Front connector for SIMATIC S7-300 20 pole (6ES7392-1AJ00-0AA0) with 20 single cores AWG 20, Single cores UL / CSA AWM Style 1007/1569 FT2 TR64 Screw version VPE=1 unit L = 5.0 mShow prices

6ES7922-3BF00-0UC0

Front connector for SIMATIC S7-300 40 pole (6ES7392-1AM00-0AA0) with 40 single cores AWG 20, Single cores UL / CSA AWM Style 1007/1569 FT2 TR64 Screw version VPE=1 unit L = 5.0 m

6ES7922-3BF00-5AB0

Front connector for SIMATIC S7-300 20 pole (6ES7392-1AJ00-0AA0) with 20 single cores 0.5 mm2, Single cores H05V-K, Screw version VPE=5 units L = 5.0 mShow prices

6ES7922-3BF00-5AC0

Front connector for SIMATIC S7-300 40 pole (6ES7392-1AM00-0AA0) with 40 single cores 0.5 mm2, Single cores H05V-K, Screw version VPE=5 units L = 5.0 m

Front connectors with crimp connections

6ES7921-3AH00-1AA0

SIMATIC S7-300, Front connector for crimp contacts, without crimp contacts 20 pole, VPE=100 unitsShow prices

6ES7921-3AH20-1AA0

SIMATIC S7-300, Front connector for crimp contacts, without crimp contacts 40 pole, VPE=100 units

Power supplies
1-phase, 24 V DC (for S7-300 and ET200M)

6ES7305-1BA80-0AA0

SIMATIC S7-300 with Regulated power supply PS305 input: 24-110 V DC output: 24 V DC/2 AShow prices

6ES7307-1BA01-0AA0

SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V DC/2 AShow prices

6ES7307-1EA01-0AA0

SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V/5 A DCShow prices

6ES7307-1EA80-0AA0

SIMATIC S7-300 Outdoor Regulated power supply PS307 input: 120/230 V AC, output: 24 V/5 A DCShow prices

6ES7307-1KA02-0AA0

SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V / 10 A DC

SIPLUS power supplies
1-phase, 24 V DC (for S7-300 and ET200M)

6AG1305-1BA80-2AA0

SIPLUS S7-300 PS 305 -25...+70°C with conformal coating based on 6ES7305-1BA80-0AA0 . Stabilized power supplies Input: 24-110 V DC Output: 24 V DC/2 AShow prices

6AG1307-1EA01-7AA0

SIPLUS S7-300 PS 307 -25 ... +70°C with conformal coating based on 6ES7307-1EA01-0AA0 . STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V DC/5 A.Show prices

6AG1307-1KA02-7AA0

SIPLUS S7-300 PS 307 10 A -25...+70°C with conformal coating based on 6ES7307-1KA02-0AA0 . Stabilized power supply PS 307 Input: 120/230 V AC Output: 24 V DC/10 A

Overview
- Modular I/O system with IP20 degree of protection, particularly suitable for user-specific and complex automation tasks
- Consists of a PROFIBUS DP or PROFINET interface module IM 153, up to 8 or 12 I/O modules of the S7-300 automation system (structure with bus connection or with active bus modules), and a power supply if applicable
- Can be expanded with S7-300 automation system signal, communication and function modules
- Applicable Ex analog input or output modules with HART optimize the ET 200M for use in process engineering
- Can be used in redundant systems (S7-400H, S7-400F/FH)
- Modules can be replaced during operation (hot swapping) with the bus modules active
- Transmission rates up to 12 Mbps
- Ex approval to Cat. 3 for Zone 2 acc. to ATEX 100 a
- Fail-safe digital in/outputs as well as analog inputs for safety-oriented signal processing in accordance with PROFIsafe
- Supports modules with expanded user data, e.g. HART modules with HART minor variables

Availability
As part of our established product portfolio, the SIMATIC S7-300 / ET 200M system families will generally be available until 2023.
Following the product phase-out declaration, products will be available as spare parts for another ten years.

Design
The ET 200M modular I/O device comprises:
- One IM 153 interface module
- Up to 12 I/O modules of the S7-300 automation system and
- If required, one power supply.

There are no slot rules for the I/O modules. Any combination is permissible.

The ET 200M is connected via an interface module IM 153 to PROFIBUS DP or PROFINET. A connection to PROFIBUS DP using fiber-optic technology is additionally possible by means of additional optical link modules (OLM) or the optical bus terminal (OBT).

Depending on the quantity structure of the interface module (IM), different numbers and types of I/O modules can be inserted.

The full address space of the ET 200M can only be used with a suitable master.
 

IM 153-1 (Standard)

IM 153-2 (High Feature)

Function

  • - PROFIBUS DP standard slave, DP V1 slave with expanded functionality
  • - PROFIBUS DP standard DP V1 slave with full S7 functionality for FM/CP
  • - Redundancy through 2 x IM 153-2
  • - Time stamp function and time-of-day synchronization
  • - Routing of parameter settings to intelligent field devices (e.g. HART)
  • - Isochronous mode
  • - Configuration changes in RUN in the non-redundant system
  • - Identification functions
  • - Firmware update via bus

Address volume

128 bytes for inputs and 128 bytes for outputs each

244 bytes for inputs and 244 bytes for outputs each

Modules that can be used

SM; simple, non-parameterizable CPs and FMs

All SM/FM/CP/F modules without restriction

 
 

IM153-4 PN (Standard)

IM 153-4 PN (High Feature)

Function

  • - Up to 12 modules can be plugged-in
  • - Integrated 2-port switch
  • - Module replacement possible without PG (LLDP); optional: Saving the IP address and name on MMC
  • - Shared Device on up to two IO controllers
  • - Media redundancy (MRP)
  • - Isochronous real-time communication
  • - IRT option "high performance"
  • - Up to 12 modules can be plugged-in
  • - Integrated 2-port switch
  • - Module replacement possible without PG (LLDP); optional: Saving the IP address and name on MMC
  • - Shared Device on up to two IO controllers
  • - Media redundancy (MRP)
  • - Isochronous real-time communication
  • - IRT option "high performance"
  • - F modules (PROFIsafe)
  • - Connection to S7-400 H CPUs with system redundancy

Address volume

192 bytes for inputs and 192 bytes for outputs each

672-byte inputs (for expanded HART user data)
192-byte outputs

Modules that can be used

SM; simple, non-parameterizable CPs and FMs

All SM/FM/CP/F modules without restriction


Configuration using bus connectors
The simple design with S7-300 bus connectors makes the ET 200M flexible and easy to service:
- Module assembly;
simply attach the modules to the DIN rail, pivot them and screw them down.
- Integrated backplane bus;
the backplane bus is integrated into the modules. The modules are connected through bus connectors that are plugged into the back of the housings.

Assembly using active bus modules
The active bus modules allow reaction-free module replacement during operation:
- Time-saving module replacement;
operation is not interrupted on module replacement, it continues with the remaining modules. When the new module is inserted, it is automatically brought into operation again. With S7-400 as master, pull/plug operations for distributed modules and central modules are handled in the same way. The relevant interrupt is generated in the CPU. For all other DP standard masters, a signal is sent to the master via DP diagnostics. Hot-swap operations are not supported with S7-300 as master

Various modules are available for assembling the ET 200M that are mounted on a special DIN rail.
- BM PS/IM bus module to hold the power supply and IM 153
- BM IM 153/IM 153 bus module for receiving two IM 153-2 modules for redundant operation (PROFIBUS only)
- BM 2x40 bus module to hold 2 I/O modules of 40 mm in width
- BM 1x80 bus module to hold 1 I/O module of 80 mm in width

To achieve the specified thread length, an explosion-proof partition is available as spare part; it can be inserted between two bus modules.
- Easy assembly;
the bus modules are pivoted in the DIN rail, arranged end-to-end and fixed using side connectors. The modules can then be inserted in the bus modules and screwed down so that they contact the bus module connector. Connectors of unused slots must be protected with backplane bus covers. A bus module cover must be plugged into the side of the last bus module.

Power supply
For ET 200M, single-phase power supplies are available with 2 A, 5 A and 10 A as special variants.

Function
How it works
The user program of the automation system can access the inputs/outputs of the modular ET 200M I/O devices as well as the inputs/outputs of the central controller.

Communication over the bus system is fully handled by the master interface in the central controller and by the IM 153 interface.
The diagnostics functions verify the proper operation of the ET 200M.

The ET 200M can diagnose:
- Module errors
- Short-circuits (outputs)
- Bus faults, i.e. incorrect data transmission
- 24 V DC load voltage supply
- Hot-swapping of I/O modules

The diagnostics data is evaluated as follows:
- Decentralized, with diagnostics LEDs on the ET 200M
- Centrally, in the central module (CPU) of the programmable controller.

Configuration and parameterization PROFIBUS

Configuration message frame

Parameter assignment frame

Length

15 bytes + 5 bytes per S7-300 I/O module

10 bytes + 20 bytes per programmable S7-300 I/O module


Calculation of the required message frame length for the configuration and parameterization message frames

The DP master must provide the required amount of configuration and parameterization data. A few masters offer a shorter configuration and parameterization message frame length. For example, the maximum lengths of the configuration and parameterization message frames in the S5-95U/DP are 32 bytes each. This means in this example that a maximum of 3 modules can be plugged into the ET 200M, where one of them may be parameterizable.

When connecting the device to master modules which have not been configured with COM PROFIBUS or STEP 7 (operated on master modules of other manufacturers), a fixed pre-allocated GSD file may be created by COM PROFIBUS as of version 3. This is then loaded into the configuration tool of the other vendor and can be used for simple configuration of the station.

This allows use of the convenient plain text parameterization of COM PROFIBUS, eliminating the hexadecimal code entries in the configuration tool of the vendor.

A suitable master is required to use the full addressing range of the IM 153.

Technical specifications

General technical data ET 200M

Cables and connections

Screw and spring-loaded connections in permanent wiring

Degree of protection

IP20

Ambient temperature on vertical wall (preferred mounting position)

 
  • - with horizontal assembly

0 to +60 °C

  • - with other assembly

0 to +40 °C

Relative humidity

5 to 95% (RH stress level 2 according to IEC 1131-2)

Atmospheric pressure

795 to 1080 hPa

Mechanical stress

 
  • - Vibrations

IEC 68, parts 2 – 6:
10 - 57 Hz (const.amplitude 0.075 mm) 57 - 150 Hz (constant acceleration 1 g)

  • - Shock

IEC 68, parts 2 – 27
half-sine, 15 g, 11 ms

Gọi điện thoại