Thiết kế nhỏ gọn, khả năng kết nối linh hoạt và tính sẵn sàng của hệ thống cao với các kết nối PROFINET dự phòng: hệ thống I/O phân tán SIMATIC ET 200SP HA hoàn toàn phù hợp với các yêu cầu của ngành công nghiệp chế biến. Thiết kế mới cho phép lên đến 56 mô-đun I/O trên mỗi trạm. Khả năng tập trung cao ấn tượng lên đến 32 kênh trên một mô-đun chỉ rộng 22,5 mm cho phép tiết kiệm tối đa trong tủ điều khiển...
SIMATIC ET 200SP HA
Interface module
6DL1133-6CV50-0AM0
SIMATIC ET 200SP HA, 5 IM covers, 50 mm, for protection of IM empty slotsShow prices
6DL1155-6AU00-0PM0
SIMATIC ET 200SP HA, PROFINET interface module IM155-6 PN max. 56 I/O modules, multi-hot swap, without server module
Digital I/O modules
6DL1131-6BH00-0PH1
SIMATIC ET 200SP HA, digital input module, DI 16X24VDC HA, suitable for terminal block H1, M1, color code CC01, channel diagnosticsShow prices
6DL1131-6BL00-0PH1
SIMATIC ET 200SP HA, digital input module, DI 32X24VDC HA, suitable for terminal block, H1, P0, color code CC00, channel diagnosticsShow prices
6DL1131-6DF00-0PK0
SIMATIC ET 200SP HA, digital input module, DI 8X24 ... 125VDC HA suitable for terminal block K0, color code CC42, channel diagnosticsShow prices
6DL1131-6GF00-0PK0
SIMATIC ET 200SP HA, digital input module, DI 8X230VAC HA suitable for terminal block K0, color code CC41, Module diagnosticsShow prices
6DL1131-6TH00-0PH1
SIMATIC ET 200SP HA, digital input module, DI 16XNAMUR HA, suitable for terminal block H1, M1, color code CC01, channel diagnosticsShow prices
6DL1132-6BH00-0PH1
SIMATIC ET 200SP HA, digital output module, DQ 16X24VDC/0,5A HA, suitable for terminal block, H1, M1, color code CC02, channel diagnosticsShow prices
6DL1132-6BL00-0PH1
SIMATIC ET 200SP HA, digital output module, DQ 32X24VDC/0.5A HA, suitable for terminal block, H1, N0, color code CC00, channel diagnosticsShow prices
6DL1132-6HD50-0PK0
SIMATIC ET 200SP HA, Signal relay module changeover contact, RQ 4x120VDC-230VAC/5A CO HA suitable for terminal block K0, color code CC40, module diagnostics
Analog I/O modules
6DL1134-6JH00-0PH1
SIMATIC ET 200SP HA, analog input module, AI 16XTC/8XRTD 2-/3-/4-wire HA, suitable for terminal block H1, M1, color code CC00, channel diagnostics, 16-bit, +/-0.05%, 2-/3-/4-wireShow prices
6DL1134-6TH00-0PH1
SIMATIC ET 200SP HA, analog HART input module, AI 16XI 2-wire HART HA, suitable for terminal block H1, M1, color code CC01, channel diagnostics, 16-bit, +/-0.1%,Show prices
6DL1134-6UD00-0PK0
SIMATIC ET 200SP HA, analog HART input module, AI 4XI 2-/4-Wire HART isol, suitable for terminal block K0, L0, color code CC01, channel diagnostics, 16-bit, +/-0.1%,Show prices
6DL1135-6TF00-0PH1
SIMATIC ET 200SP HA, analog output module, AQ 8XI HART HA suitable for terminal block H1, M1, color code CC00, channel diagnostics, 16-bit, +/-0.1%Show prices
6DL1135-6UD00-0PK0
SIMATIC ET 200SP HA, analog output module, AQ 4XI HART isol suitable for terminal block K0, L0, color code CC00, channel diagnostics, 16-bit, +/-0.1%
Analog/digital module
6DL1133-6EW00-0PH1
SIMATIC ET 200SP HA, configurable I/O module, AI-DI16/DQ16X24VDC HART, suitable for terminal block H1, M1, color code CC00, channel diagnostics, 16-bit, +/-0.1%,
Fail-safe I/O-modules
6DL1136-6BA00-0PH1
SIMATIC ET 200SP HA, digital input module, safety-oriented F-DI 16X24VDC HA, SIL3 (IEC 61508), up to PL E (ISO 13849-1) suitable for terminal block H1, M1, color code CC01, channel diagnosticsShow prices
6DL1136-6DA00-0PH1
SIMATIC ET 200SP HA, digital output module, safety-oriented F-DQ 10X24VDC/2A HA, SIL3 (IEC 61508), up to PL E (ISO 13849-1) suitable for terminal block H1, M1, color code CC01, channel diagnostics
Ex I/O modules
6DL1131-6TD00-0HX1
SIMATIC ET 200SP HA, ET 200SP, digital ex-i input module, DI 4xNAMUR, suitable for BaseUnit type X1, channel diagnosticsShow prices
6DL1132-6CB00-0HX1
SIMATIC ET 200SP HA, ET 200SP, digital ex-i output module, Ex-DQ 2x17,4VDC/27mA suitable for BaseUnit type X1, channel diagnosticsShow prices
6DL1132-6EB00-0HX1
SIMATIC ET 200SP HA, ET 200SP, digital ex-i output module, Ex-DQ 2x23,1VDC/20mA suitable for BaseUnit type X1, channel diagnosticsShow prices
6DL1133-6PX00-0HW0
SIMATIC ET 200SP HA, ET 200SP, Power module Ex-PM E, 24V 0.8A, WxH: 50mm x 117mm, suitable for BaseUnit type W0Show prices
6DL1134-6JD00-0HX1
SIMATIC ET 200SP HA, ET 200SP, analog ex-i input module, Ex-AI 4xTC/2xRTD 2-/3-/4-wire, suitable for BaseUnit type X1, channel diagnostics, 16bit, +/-0.05%Show prices
6DL1134-6TB00-0HX1
SIMATIC ET 200SP HA, ET 200SP, analog ex-i HART input module, Ex-AI 2xI 2-Wire HART, suitable for BaseUnit type X1, channel diagnostics, 16bit, +/-0.3%Show prices
6DL1135-6TB00-0HX1
SIMATIC ET 200SP HA, ET 200SP, analog Ex-i HART output module, Ex-AQ 2xI HART, suitable for BaseUnit type X1, channel diagnostics, 16-bit, +/-0.3%Show prices
6DL1193-6BP00-0BX1
SIMATIC ET 200SP HA, ET 200SP, BaseUnit type X1, for Ex electronic modules, push-in terminals, WxH: 20 mm x 117 mmShow prices
6DL1193-6BP00-0DW0
SIMATIC ET 200SP HA, ET 200SP, BaseUnit type W0, for power module Ex-PM E, WxH: 50 mm x 117 mm
Carrier modules
6DL1193-6BH00-0RM0
SIMATIC ET 200SP HA, Carrier module in redundant carrier for holding 2 interface modules of the ET 200SP HA incl. server moduleShow prices
6DL1193-6BH00-0SM0
SIMATIC ET 200SP HA, Carrier module in single carrier for holding one interface module of the ET 200SP HA incl. server moduleShow prices
6DL1193-6GA00-0NN0
SIMATIC ET 200SP HA, carrier module 2-fold carrier for holding 2 I/O modules of the ET 200SP HAShow prices
6DL1193-6GC00-0NN0
SIMATIC ET 200SP HA, carrier module 8-fold carrier for holding 8 I/O modules of the ET 200SP HAShow prices
6DL1193-6GC00-8NN0
SIMATIC ET 200SP HA, 8-fold carrier without Power Bus can only be operated with light-gray or black terminal blocks, for holding 8 I/O modules of the ET 200SP HAShow prices
6DL1193-6MC00-0AA0
ET 200SP HA mounting rail 482 mm (approx. 19 inch) incl. grounding screw, integrated DIN rail for mounting of incidentals such as terminals, automatic circuit breakers and relaysShow prices
6DL1193-6MD00-0AA0
ET 200SP HA mounting rail 1500 mm (approx. 59 inch) incl. grounding screw, integrated DIN rail for mounting of incidentals such as terminals, automatic circuit breakers and relaysShow prices
6DL1193-6PA00-0AA0
SIMATIC ET 200SP HA, spare part Server module for ET 200SP HAShow prices
6ES7590-5AA00-0AA0
SIMATIC S7-1500, grounding screw for connection of PE to S7-1500 mounting rail; mandatory for 2000 mm mounting rail 20 units per packing unit
Terminal blocks
6DL1193-6TP00-0BH1
SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature Width: 22.5 mm,Show prices
6DL1193-6TP00-0BK0
SIMATIC ET 200SP HA, Terminal block, type K0, 16 push-in terminals, width: 22.5 mm,Show prices
6DL1193-6TP00-0BM1
SIMATIC ET 200SP HA, Terminal block, type M1, 32 push-in terminals, internal reference temperature width: 45 mm,Show prices
6DL1193-6TP00-0BN0
SIMATIC ET 200SP HA, terminal block, type N0, 64 push-in terminals, Width: 45 mmShow prices
6DL1193-6TP00-0BP0
SIMATIC ET 200SP HA, terminal block, type P0, 64 push-in terminals, Width: 45 mmShow prices
6DL1193-6TP00-0DH1
SIMATIC ET 200SP HA, Terminal block, Type H1, 32 push-in terminals, internal reference temperature New load group, width: 22.5 mm,Show prices
6DL1193-6TP00-0DK0
SIMATIC ET 200SP HA, Terminal block, type K0 16 push-in terminals, New load group, width: 22.5 mm,Show prices
6DL1193-6TP00-0DL0
SIMATIC ET 200SP HA, terminal block, type L0, 16 push-in terminals, new load group, width: 45 mmShow prices
6DL1193-6TP00-0DM1
SIMATIC ET 200SP HA, Terminal block, type M1, 32 push-in terminals, internal reference temperature New load group, width: 45 mm,Show prices
6DL1193-6TP00-0DN0
SIMATIC ET 200SP HA, terminal block, type N0, 64 push-in terminals, Width: 45 mm
6DL1193-6TP00-0DP0
SIMATIC ET 200SP HA, terminal block, type P0, 64 push-in terminals, Width: 45 mm
Terminal blocks
6DL1193-6TP00-0DP0
SIMATIC ET 200SP HA, terminal block, type P0, 64 push-in terminals, Width: 45 mm
BusAdapter
6DL1193-6AF00-0AA0
SIMATIC ET 200SP HA, bus adapter BA 2XFC, 2x Fast Connect connection for PROFINETShow prices
6DL1193-6AG00-0AA0
SIMATIC ET 200SP HA, bus adapter BA 2XLC 2 x LC glass FOC connections, for PROFINETShow prices
6DL1193-6AG20-0AA0
SIMATIC ET 200SP HA, bus adapter BA LC/RJ45, Media converter FOC/CU 1x LC FO connection and, 1x RJ45 connection for PROFINETShow prices
6DL1193-6AG40-0AA0
SIMATIC ET 200SP HA, bus adapter BA LC/FC, Media converter FOC/CU 1x LC FO connection and, 1x FastConnect (FC) connection for PROFINETShow prices
6DL1193-6AR00-0AA0
SIMATIC ET 200SP HA, bus adapter BA 2xRJ45, 2 RJ45 sockets for PROFINETShow prices
6GK5991-2VA00-8AA2
BA 2xRJ45VD HA, Bus adapter VD (Variable Distance), for Ethernet- Communication about 2-,4- or 8 wire copper cables, 2xRJ45 conn. For Industrial Ethernet and PROFINET, extended Temperature range -40°C to +70°C, Conformal Coating, installation height up to 4000m Distance up to 2 wire to 1000m at 10 Mbit/s 2 wire to 100m at 100 Mbit/s 4 wire to 300m at 100 Mbit/s
Tóm lược về
Compact design, flexible connection possibilities and high system availability with redundant PROFINET connections: the SIMATIC ET 200SP HA distributed I/O system is perfectly suited to the requirements of the process industry. The new design allows up to 56 I/O modules per station. An impressively high concentration of up to 32 channels on a module that is only 22.5 mm wide allows for maximum economy in the control cabinet.
Redundant PROFINET connections allow the connection of high-availability controllers via two independent networks, with a choice of copper or fiber-optic cables. The system can be scaled and extended in small steps using a variety of available modules, for example with digital and analog I/Os as well as NAMUR, HART, and other protocols. All 24 V standard signals are connected via an identical terminal block type, which allows a high degree of standardization for the control cabinets.
SIMATIC ET 200SP HA is designed for use in the control cabinet as well as for hazardous areas up to Ex zone 2. The extended temperature range from -40 to +70 °C and the conformal coating of all components allow direct installation in the field.
You also benefit in engineering from seamless integration in SIMATIC PCS 7. The SIMATIC ET 200SP HA in combination with the Advanced Process Library also offers flexible and simple online parameter assignment and selection of up to four HART variables per channel.
Benefits
Highlights at a glance
- Availability
Redundancy at the PROFINET interface (S2 or R1)
Terminal block with integrated I/O redundancy
Hot swapping during runtime
Station expansion possible during runtime
- Easy to use
Compact modules with permanent wiring
One terminal block for all 24 V standard signals
Tool-free connection system with push-in terminals
- Compact design
Compact with up to 56 I/O modules per station
High concentration of up to 32 channels on a module that is only 22.5 mm wide
System-integrated power bus
- Seamless integration in SIMATIC PCS 7
- PROFINET IO communication standard
Design
Easy handling and high availability
The SIMATIC ET 200SP HA impresses with its particularly simple installation and assembly. The new terminal layout and push-in technology make tool-free wiring possible. Control cabinet configuration is particularly flexible, as the separation of mechanical and electronic components allows the station to be pre-wired without I/O modules. Empty modules can be inserted in the integrated terminal blocks and easily replaced at any time. Station extension during operation offers additional advantages for plant flexibility and availability.
In addition to the option of operating the SIMATIC ET 200SP HA station redundantly over the PROFINET interface, you can also operate the I/O modules redundantly. This option is implemented using a terminal block for integrated I/O redundancy, which is very cost-effective and saves a lot of space. The new design with standardized terminal blocks makes redundant wiring as simple as single operation.
Main components of the SIMATIC ET 200SP HA distributed I/O system
The SIMATIC ET 200SP HA distributed I/O system consists of the following components:
Mounting rail
The mounting rail is required for fitting an ET 200SP HA station in the control cabinet. The IM carrier modules for interface modules, the carrier modules for the I/O modules and the server module are attached to the mounting rail.
IM carrier module for interface modules
Two versions of the IM carrier modules are available:
- IM single carrier module for 1 interface module, for single connection to PROFINET
- IM redundant carrier module for 2 interface modules, for redundant connection to PROFINET
IM 155‑6 PN interface module and BusAdapter
The interface module ensures communication between the ET 200SP HA station and the SIMATIC PCS 7 automation system (controller) over PROFINET. A BusAdapter as a separate component allows a free choice of connection technology:
- BA 2×RJ45: 2 electrical connections for bus cable with standard RJ45 connector
- BA 2×FC: 2 electrical connections for direct connection of FastConnect bus cable
- BA 2×LC: 2 optical ports for fiber-optic cables
Carrier module and terminal blocks for I/O modules
The slots for the I/O modules are created by connecting carrier modules and terminal blocks. The carrier modules provide the electrical and mechanical connections for the individual modules; the terminal blocks contain the process terminals for connecting sensors, actuators and other devices.
Two versions of the carrier modules are available, one with 2 slots and one with 8 slots for I/O modules.
The selection of available terminal blocks determines the following properties:
- Type of load voltage supply
- Formation of potential groups
- Type of required I/O module
- Redundant configuration of I/O modules
I/O modules
Modules with 8 or 16 digital channels (DI, DQ) and with 8 or 16 analog channels (AI, AQ) are available as I/O modules. A relay module (RQ) and a universal analog/digital module (AI-DI/DQ) can also be supplied.
All I/O modules with a signal voltage of up to 24 V DC can also be used redundantly.
Slot covers can be attached if I/O modules are not to be inserted in slots or slots are to be reserved for later expansion. You can insert a label strip for the planned I/O module on the front of the slot cover.
Server module and power bus cover
The server module and power bus cover complete the configuration of the ET 200SP HA station. The power bus cover protects the power bus contacts.
Function
Main functions
Compact I/O modules
- Up to 32 channels on a module that is 22.5 mm wide
- Up to 56 modules per station
Perfectly suited for applications in the field
- Installation up to hazardous zone 2
- Extended temperature range: -40 to +70 °C
- Enhanced interference immunity in accordance with NAMUR recommendation NE21
- Conformal coating on all components
- Can be used at altitudes of up to 4 000 meters
Wide range of supported module types
- 16×AI, 8×AO HART, 16×DI, 16×DO etc.
Standard I/O terminal block
- For all 24 V signals AI, AO, DI, DO
Redundant configurations
SIMATIC ET 200SP HA, basic redundant configurations
The availability of the ET 200SP HA distributed I/O can if necessary be increased with redundant configurations. A number of different configurations are possible (the individual redundant configurations can also be combined):
Media redundancy
ET 200SP HA stations with 1 interface module each are connected to an automation system in a ring topology. At least one device in the ring takes on the role of the redundancy manager; the other devices in the rin are redundancy clients. The automation system is configured as MRP manager.
If the ring topology is interrupted, the ET 200SP HA stations in the system remain available.
One of the following functions is possible in runtime:
- Connecting and removing ET 200SP HA stations
- Replacing PROFINET cables
System redundancy
ET 200SP HA stations are connected to a redundant automation system. All components used redundantly are in continuous operation. If a redundancy partner fails, the function is maintained by transferring the master role or selecting a different communication path.
The ET 200SP HA stations remain available in the PROFINET IO system if a CPU or a PROFINET cable fails.
One of the following functions is possible in runtime:
- Connecting and removing ET 200SP HA stations
- Replacing PROFINET cables
- Replacing a CPU
I/O redundancy
To configure I/O redundancy, 2 I/O modules of the same type are inserted beside each other in a terminal block for redundant configuration (width: 45 mm). This terminal block connects the process signals of the two modules to a common process terminal. The advantages are:
- There is less wiring work than for connecting separate I/O modules, as interconnection of the process signals is integrated in the system.
- Redundant signal processing of the sensors and actuators at a module level increases the availability of the system.
The following applies if an I/O module or a channel of one of the two I/O modules fails:
- Error-free inputs remain available in the system.
- Error-free outputs continue to be controlled in the system.
One of the following functions is possible for an I/O module in a module pair in error-free operation:
- Firmware update
- Replacing a module
dienelectrics@gmail.com
0909186879 
