Cảm biến chuyển động IP65 Merrytek ATY-MC609VRCV10ABCDXXX | Đèn LED, Kháng nước

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm MERRYTEK

• 

  Hướng dẫn sử dụng Bộ điều khiển cảm biến từ xa Merrytek Remote control MH10

• 

  Wiki: DALI (Digital Addressable Lighting Interface) là gì? Nguyên lý hoạt động và Ứng dụng

• Xem thêm

Cảm biến chuyển động IP65 Merrytek ATY-MC609VRCV10ABCDXXX |  Đèn LED, Kháng nước

Waterproof UL Motion Sensor / Led Security Lights Motion Sensor

 

Basic Information

Place of Origin: China
Brand Name: Merrytek
Certification: UL
Model Number: ATY-MC609VRCV10ABCDXXX
 

Detail Information

Product Name: ATY-MC609VRCV10ABCDXXX
Rated Input Voltage: 120/277/347Vac
Operating Mode: ON/OFF 1-10V
Stand-by Power: <1.0W
Hold Time: 5S/ 30S/ 1min/ 3min/ 20min/ 30min (Remote Control：5S/ 30S/ 1min/ 3min/ 5min/ 10min/ 20min/ 30min）
Detection Area:100%/ 5 0%（Remote Control: 100%/ 50%）
Operating Temperature: -35℃~+55℃
IP Rating: IP65
Mounting Height: Max. Mounting Height：12m Max.
Load Power: 800W Inductive 1200W Resistive @347VAC 1200W Inductive 1600W Resistive @480VAC
Life: 50000h
High Light: microwave motion sensor, high bay motion sensor
 

Product Description

North American Version Microwave Motion Sensor for linear & batten and high bay IP65 ATY-MC609VRCV10ABCDXXX
 

Features

ATY-MC609VRCV10AXXX


ATY-MC609VRCV10CXXX


ATY-MC609VRCV10DXXX

 - Rated input voltage 120/277/347Vac
- Large detection zone, IP65
- 12m Max. Mounting height
- Stand-by Power: ≤1.0W
- On/ off, 3-step dimming function
- North American version for linear & batten and high bay & low bay.
- Functions such as detection area, hold time, stand-by level, stand-by dim level etc can be set via DIP or infrared remote control MH01.
- 5 Years Guarantee
 

Parameters:

Input	Rated Input Voltage	120/ 277/ 347V AC
	Stand-by Power	≤1.0W
	Wiring Method	Wiring connection Wire diameter:18AWG
Output	Operating Mode	ON/OFF 1-10V
	Load Power	800W Inductive 1200W Resistive @347VAC 1200W Inductive 1600W Resistive @480VAC
	1-10V Dimming	< 50mA (Non constant current source)
	Wiring Method	Wiring connection Wire diameter:18AWG
Sensor Parameters	HF Operating frequency	5.8 GHz ±75 MHz,ISM wave band
	HF Radiated power	0.5mW Max.
	Detection Area	100%/ 50% (Remote control:100%/ 50%)
	Hold time	5S/ 30S/ 1min/ 3min/ 20min/ 30min (Remote control: 5S/ 30S/ 1min/ 3min/ 5min/ 10min/ 20min/ 30min)
	Stand-by Level	0s/ 1min/ 3min/ 10min/ 30min/ Disable (Remote control: 0s/ 10S/ 1min/ 3min/ 5min/ 10min/ 30min/ Disable)
	Daylight Sensor	5lux/ 15Lux/ 30Lux/ 50Lux/ 100lux/ 150lux/ Disable (Remote control: 5lux/ 15Lux/ 30Lux/ 50Lux/ 100lux/ 150lux/ Disable)
	Stand-by Dim Level	10%/ 20%/ 30%/ 50% (Remote control: 10%/ 20%/ 30%/ 50%)
	Mounting Height	Max. Mounting height:12m Max.
	Detection Angel	150°(wall mounting), 360°(ceiling mounting)
Operating Environment	Operating temperature	-35℃~+55℃
	Storage temperature	-40℃~+80℃
Safety & EMC	Isolation pressurization	N/A
	EMC	N/A
Others	Certificate requirement	UL
	IP rating	IP65
	Protection Class	N/A
	Installation requirement	Independent Installation
	Installation size	¢72*59mm
	Packaging requirement	Bubble bag + Clapboard +Outer Carton (K=A)
	Life	50000h

 

Dimension (Unit:mm)

1) Bottom hole mounting : ATY-MC609VRCV10AXXX，ATY-MC609VRCV10CXXX



2) Side screw mounting: ATY-MC609VRCV10DXXX

 

Wiring Diagram

ATY-MC609VRCV10AXXX



ATY-MC609VRCV10CXXX



ATY-MC609VRCV10DXXX

 

 

Function

1) On/OFF Function (stand-by period be set to “0”s)









2) 2-step dimming function (stand-by period be set to “+∞”)









3) 3-step dimming function (stand-by period be set to “10s/1min/3min/5min/10min/30min”)











 

Structure

 

Radiation Pattern

Ceiling mounting

 

Wall mounting

Remote Control

Vui lòng xem Hướng dẫn sử dụng Remote MH10 ở đây
 

DIP Switch Setting

Detection Area (Sensitivity)

 

Hold Time

 

Stand-by Period

 

Stand-by Dim Level

 

Daylight Sensor

*Disable means the daylight sensor does not work. The sensor will turn on light once motion is detected regardless of ambient light level.
 

Initialization

On/Off function /3-step dimming function

After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it turns off the light. During the initialization, the sensor is not able to detect movement.
 

2-step dimming function

After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it dims the light to a low light level (set by stand-by dim level). During the initialization, the sensor is not able to detect movement.
 

Factory Setting

Detection area: 100%, Hold Time: 5S, Stand-by Period: 0s, Stand-by dim level: 10%, Daylight Sensor: Disable.
 

Application Notice

1/ The sensor is designed for indoor use only. Outdoor use for a long time may reduce the waterproof effects. The raining or wind blowing may trigger the microwave sensor even if without human motion when outdoor use.

2/ The distance between any two sensors should be at least 3m to avoid interference with each other.

3/ When the microwave sensor is installed in a metal lighting fixture or space with large reflector, for example a warehouse with metal roof, the microwave will be reflected and cause the lights permanently illuminated even if without motion signal. Please reduce the detection area (sensitivity) to solve the problems, or contact the microwave sensor manufacturer to provide technical support.

4/ Make sure the sensor not close to or be blocked by high density material, such as metal, glass, concrete walls etc. The materials will reduce or block microwave and cause false trigger.

5/ Make sure there are no fans or other vibrating objects in installation area. The movements will trigger sensor as well.
 

Version Change

Version: A0
Date: April 11, 2017
Description: Released new product

Version: A1
Date: March 28, 2018
Description: 1. Add voltage of 1-10V interface; 2. Change 5C cable to 3C + 2C cable.