Place of Origin | China |
---|---|
Brand Name | Merrytek |
Certification | CE , R&TTE |
Model Number | MC003V/CP + MW01 |
Dimming Mode: | 3 Step Dimming | Product Name: | MC003V/CP + MW01 |
---|---|---|---|
IP Rating: | IP20 | Rated Load: | 800w (Inductive) 1200w (Resistive) |
Operating Voltage: | 220~240Vac, 50/60HZ (MC003V/CP) 12VDC (MW01) | Detection: | Max(D×H):16m × 10m (MC003V/CP) |
HF System: | 5.8GHz ±75MHz, ISM Wave Band | Size (L×W×H): | 92x52x 25.5mm ( MC003V/CP) |
Approval: | CE & R&TTE | Operation Temperature: | -35℃~70℃ (MC003V/CP) -20℃ ~ 70℃ (MW01) |
Clustered Control RF Wireless Motion Sensor MC003V/CP + MW01 CE
Stairwell, corridor, balcony, pathway, warehouse,etc
With sufficient ambient light, all lamps switch off even if there is motion in the detection zone
With insufficient ambient light and the person walks to the 2nd floor, the 2nd lamp switches on at 100% and the 1st and 3rd lamps switch on at a low light level (Preset in the sensor)
The person walks to the 3rd floor, the 3rd lams lights up to 100%, and the 4th lamp swiches on at a low light level. The 2nd lamp dims to a low light level after hold time
The person walks to the 4th floor, the 4th lamp lights up at 100%, and the 5th lamp switches on at a low light level. The 3rd lamp dims to a low light level after hold time. The 2nd lamp switches off after a standby period
Chức năng điều khiển cường độ ánh sáng hệ thống đèn LED hành lang
1. When no motion is detected, all lamps switch off.
2. With insufficient ambient light, if any motion is detected in exit or entrance, all lamps switch on at the same time
3. After hold time, all lamps dim to a low light level if no new motion trigger
4. After stand-by period, the lamps switch off if no movement detected in the detection zone
Same as the wiring scheme any-to-any communication
MC003V/CP
Operating voltage |
220-240Vac, 50/60Hz |
Rated load |
800W (inductive), 1200W (resistive) |
HF system |
5.8GHz ±75MHz, ISM wave band |
Power consumption |
≤0.5W (standby), <1W (operation) |
Transmitting power |
<0.5mW |
Detection zone Max.(D x H) |
16m x 10m |
Motion detection |
0.5~3m/s |
Detection angle |
150° (wall installation) 360° (ceiling installation) |
IP rating |
IP20 |
Operation Temperature |
-35℃~70℃ |
Hold time |
10s/ 30s/ 90s/ 3min/ 20min/ 30min |
Detection sensitivity |
10%/ 25%/ 50%/ 75%/ 100% |
Daylight sensor |
5lux/ 10lux/ 30lux/ 50lux/ Disable |
Stand-by dimming level |
10%/ 20%/ 30%/ 50% |
Stand-by period |
5s/ 5min/ 10min/ 30min/ 1h/ Disable |
Life time |
50,000 hours |
Guaranty |
5 years |
MW01
Operating voltage |
12VDC |
Transmitting power |
≤20mW |
Frequency range |
433MHz |
Standby-power |
<0.3W |
Operating principle |
Radio transmission |
Transmission distance |
Max:100m in the free field Max:30m inside buildings |
Operating temperature |
-20℃~70℃ |
IP rating |
IP20 |