Cảm biến chuyển động Merrytek ATY-MC054VRC3V30XXXABCD | Kho-Xưởng, Thu sáng

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm MERRYTEK

• 

  Wiki về DALI (Digital Addressable Lighting Interface) là gì? Nguyên lý hoạt động và Ứng dụng

• 

  Hướng dẫn sử dụng Bộ điều khiển cảm biến từ xa Merrytek Remote control MH10

• Xem thêm

Cảm biến chuyển động Merrytek ATY-MC054VRC3V30XXXABCD | Kho-Xưởng, Thu sáng

120 - 277Vac High Bay Dimmable Motion Sensor Merrytek For Metal Ceilings
 

Basic Information

Place of Origin: China
Brand Name: Merrytek
Certification: cULus, CE, SAA, FCC, RED
Model Number: ATY-MC054VRC3V30XXXABCD
 

Detail Information

Operating Voltage: 108-305V AC, 60Hz
Rated Voltage: 120/277Vac, 60Hz
Stand-by Power: <1W
Working Mode: ON/OFF Function, 1-10V Dimming
Operating Temperature: -35℃~55℃
Certificate: CULus, CE, SAA, FCC, RED
IP Rating: P65
Dimension: (ΦxH) 72*59mm
Lifetime: 50,000h @ Ta Full Load
High Light: indoor light motion sensor, motion detection sensor


Product Description
ATY-MC054VRC3V30XXXABCD Stand Alone Microwave Dimmable Motion Sensor IP65 120-277Vac For Warehouse
 

Features

 1. Operating voltage 120~277V AC, suitable to Euro & North American market.
 
2. Patented microwave antenna, mounting height is 15m Max, suitable to install in most of warehouses.
 
3. Supports high-sensitivity and low-sensitivity modes (for metal ceilings, metal reflector mounting environments)
 
4. Work with 1-10V dimmable LED driver, easy to achieve 2-step or 3-step dimming function.
 
5. New patented remote control to adjust the launch angle to avoid misuse.
 

Parameter

Input
Operating Voltage Rage: 108-305VAC 60Hz
DC Input Voltage: N/A
Rated Voltage: 120-277VAC 60Hz
No-load Power: N/A
Stand-by Power: <1W
Surge Test: L N: 1kV

Output
Working Mode: ON-OFF, 1-10VDimming
Type of Load: Inductive or resistive Load
Load Capacity: 120VAC: 4A; 277VAC: 3A
Current of Load: N/A
Max. Surge Capacity: 50A (50% Ipeak, twidth =500uS, 230Vac full load, cold start); 80A (50% Ipeak, twidth =200uS, 230Vac, full load, cold start)
Dim Interface: 1-10V Dimming< 50mA (Non-constant source); 10%, 20%, 30%, 50%
Synchronous Control: N/A
High Low-level: N/A
PWM Control: N/A

Sensor Parameters
Operating Frequency: 5.8 GHz ±75 MHz, ISM band
Transmitting power: 0.5mW Max.
Hold time: 5s/ 30s/ 1min/ 3min/ 5min/ 10min/ 20min/ 30min
Stand-by dim Level: 10%/ 20%/ 30%/ 50%
Stand-by Period: 0s/ 10s/ 1min/ 3min/ 5min/ 10min/ 30min/ +∞
Detection Area: 25%/ 50%/ 75%/ 100%
Daylight Sensor: Daylight threshold: 5lux/ 15lux/ 30lux/ 50lux/ 100lux/ 150lux/ Disable (no shadow or ambient light diffuse reflection); Daylight priority: (5lux/ 15Lux/ 30Lux/ 50Lux)/ 150Lux; 100Lux/ 200Lux; 150Lux/ 300Lux
Detecting Range: See detection pattern
Mounting Height: 15m Max.
Detection Angle: 150° (wall mount), 360° (ceiling mount)

Operating Environment
Operating Temperature: -35℃…+55℃
Storage Temperature: -40℃…+80℃; humidity:10%-95% (non-condensing)

Certificate Standards
Safety standards: IEC60669-2-1, IEC60669-1; AS/NZS 60669.1, AS/NZS 60669.2.1; UL60730-1; EMC standardsEN55015, EN61000-3-2, EN61000-3-3, EN61547; AS/NZS CISPR 15, AS/NZS 4268 FCC Part 15C, Part 15B; EN 60950-1, EN301489-1, EN 201489-3, EN300440
Environment Request: Compliant to RoHS
Certificate: cULus, CE, SAA, FCC, RED

Others
Wiring: SJTW,5*18AWG (USA); H05RR-F,5*18AWG (Europe,Australi a); exposed line length: 810-830mm
Wiring color: Sheath: Black Core: Red, White, Black, Gray, Purple (US); Blue, Brown, Red, Gray, Purple (Europe, Australia)
IP Rating: IP65
Protection Class: Class II
Installation: Independent
Dimension: (ΦxH) 72*59mm
Package: Instruction+ White box+ White box tags+ Clapboard+ Carton (K=A)
Net Weight: MC054V RC A: 190g, MC054V RC C: 190g , MC054V RC D:165g
Lifetime: 50000h @ Ta full load

Note
1. “N/A” means not available.
2. Detection area is effected on volume of motion object and motion speed. The detection area is tested by a 165cm height person and walking speed is 0.5m/s.
 

Function

1) ON-OFF function, (stand-by period be set to "0"S)










2) 2-step dimming function (stand-by period be set to “+∞”)










3) 3-step dimming function (stand-by period be set to “10s/1min/3min/5min/10min/30min”)













4) Daylight priority(stand-by period set to +∞)











 

Dimension (mm)

1) MC054V RC 3 A, MC054V RC 3 C


2) MC054V RC 3 D

Wiring

 

Function Diagram

 

Radiation Pattern

Ceiling mounting                  
*Only 100%/75%/50% detection sensitivity is workable when installed at 10m & 15m mounting height. 25% sensitivity is not able to detect motion signal.

Wall mounting  

Remote Control

 

Vui lòng xem Hướng dẫn sử dụng Remote MH10 ở đây

 

Initialization

1/ On/Off function /3-step dimming function: After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it turns off the light. During the initialization, the sensor is not able to detect movement.

2/ 2-step dimming function: After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it dims the light to a low light level (set by stand-by dim level). During the initialization, the sensor is not able to detect movement.
 

Factory setting

Detection area:100%,Hold time:5s,Stand-by Period:0s,Stand-by dim level:10%,Daylight Sensor: Disable
 

Application Notice

1) The sensor should be installed by a professional electrician. Please turn off the power before installing, wiring, changing the setting of the DIP switch.

2)The sensor which installed in the plastic and glass lampshade will reduce the sensitivity.For every 3mm increase in thickness, the sensitivity will be reduced by 20%.

3) The dimming performance could be different from different 1-10v drivers.

4) The light sensitivity threshold is in a sunny environment, no shadow and ambient light diffuse reflection..Lux level detected by sensor could be different in different environment, weather, climate, time-of-day and season.

5)The parameters of the sensor may need to be reconfigured in different installation environments. Please refer to the following instructions or contact the manufacturer.

6)This sensor is for indoor use only. It will affect the waterproof effect for outdoor use. Wind, rain, and moving objects around will cause false triggering.

7) The distance between any inductive sensors should be greater than 3m.

8) Do not place the sensor close to high-density objects such as metal, glass,concrete walls, etc, false triggering could happen. When the sensor is installed in a metal lamp, metal reflective surface, or a narrow enclosed environment, the microwave will be reflected repeatedly and cause false triggering. Please reduce the sensitivity or contact the manufacturer for technical support.

9) Please ensure that there are no moving signals around the sensor, such as fan,DC motor, sewer pipe, air outlet, etc., the sensor may generate false trigger.

10) You are advised to test 5 samples before mass application of sensor in a new lighting project.

11) Due to continuous improvement, the contents of this instruction could be changed without prior notice.