Place of Origin | China |
Brand Name | Merrytek |
Certification | CE & R&TTE |
Model Number | MC003V/R |
Detection Zone: | Max(D×H): 8m × 6m |
Rated Load: | 800w (Inductive) 1200w (Resistive) |
IP Rating: | IP20 |
Transmitting Power: | <0.5mW |
HF System: | 5.8GHz ±75MHz, ISM Wave Band |
Operating Voltage | 220-240Vac, 50Hz/ 60Hz |
Function | 2 Step/ 3 Step Dimming |
Product Name | Microwave Motion Sensor |
Working Principle | Dopple Effect |
Size | 92x 52x 25.5 Mm |
Enhance veriosn MC003V/ R 800w 1-10v Corridor Dimming Function Microwave Motion Sensor for Stairwell Application
MC003V R basically has the same specification with MC003V, except the higher mounting height 12m Max. It is innovative and active motion detectors with HF system 5.8GHz. Motion can be detected through plastic, glass and thin non-metal materials.
The sensor allows energy saving without compromising comfort. When used in combination with 1-10V dimmable LED drivers or ballasts, they can achieve 3-step dimming function, which is perfect for use in some areas that requires a light change notice before totally switch off.
Also, the 1-10V interface in the sensors can match up with Merrytek stand-alone daylight sensor MS01, and implement daylight harvesting, means the lighting system has automated controls that either turn off or dim artificial light in response to the available daylight in the space.
Chức năng điều chỉnh độ sáng 3 bước (3 -step dimming function)
With aufficient ambient light, the sensor does not switch on the lamp
With insufficient light, the sensor switches on the lamp when motion is detected
After hold time, the sensor dims the lamp at a low light level if no new motion trigger
After stand-by period, the sensor switches off the lamp if no motion is detectde in its detection zone
Chức năng điều chỉnh độ sáng 2 bước (2- Step dimming function)
No motion detected, the lamp remains at a low light level all the time
When notion is detectd, the sensor brightens the lamp to 100% illumination
After the hold time, the sensor dims the lamp at the preset low light level if no motion is detected
MC003V+1-10V driver
MC003V+daylight sensor MS01+1-10V driver
Điện áp hoạt động | 220-240Vac, 50Hz |
Định mức tải | 800W (inductive), 1200W (resistive) |
Hệ thống tần số HF system | 5.8GHz ±75MHz, ISM wave band |
Mức tiêu thụ điện năng | ≤0.5W (standby), <1W (operation) |
Mức truyền tải điện năng Transmitting power | <0.5mW |
Vùng phát hiện chuyển động Detection zone Max.(D x H) | 8m x 6m |
Tốc độ phát hiện chuyển động Motion detection | 0.5~3m/s |
Góc phát hiện chuyển động Detection angle | 150° (wall installation) 360° (ceiling installation) |
Mức bảo vệ IP rating | IP20 |
Nhiệt độ hoạt động Operation Temperature | -35℃~70℃ |
Thời gian giữ trạng thái Hold time | 10s/ 30s/ 90s/ 3min/ 20min/ 30min |
Độ nhạy phát hiện chuyển động Detection sensitivity | 10%/ 25%/ 50%/ 75%/ 100% |
Cảm biến ánh sáng ban ngày Daylight sensor | 5lux/ 15lux/ 30lux/ 50lux/ Disable |
Thời gian chờ Stand-by period | 5s/ 5min/ 10min/ 30min/ 1h/ Disable |
Cấp độ điều chỉnh cường độ sáng Stand-by dimming level | 10%/ 20%/ 30%/ 40%/ 50% |
Vòng đời Life time | 50,000 hours |
Chết độ bảo hành Guaranty | 5 years |
Detection area
Detection area can be reduced by selecting the combination on the DIP switches to fit precisely each application
Hold time
Refers to the time period the lamp remains at 100% illumination after no motion detected
Stand-by period
Refers to the time period the lamp remains at a low light level befor it completely switches off in the long absense of people. When set to Disable mode, the low light is maintained until motion is detected
Stand-by dimming level
The low light level you would like to have after the hold time in the long absence of people
Daylight sensor
The sensor can be set to only allow the lamp to illuminate velow a defined ambient brightness threshold.
When set to Disable mode, the daylight sensor will switch on the lamp when motion is detected regardless of ambient light level
50lux, 30lux: twilight operation 10lux: darkness operation only.
Note that day light sensor is active only when lap totally swiches off
Stairwell
Corridor
Balcony
Pathway
Washroom
Kitchen
Gas stations
Parking lot
Warehouse
,etc ...