Cảm biến chuyển động vi sóng Merrytek ATY-MC083VXXX (MC083S RC) | 5.8GHz, Điều khiển đèn, thiết bị HVAC

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm MERRYTEK

• 

  Wiki về DALI (Digital Addressable Lighting Interface) là gì? Nguyên lý hoạt động và Ứng dụng

• 

  Hướng dẫn sử dụng Bộ điều khiển cảm biến từ xa Merrytek Remote control MH10

• Xem thêm

Cảm biến chuyển động vi sóng Merrytek ATY-MC083VXXX (MC083S RC) |  5.8GHz, Điều khiển đèn, thiết bị HVAC

 

Basic Information

Place of Origin: China
Brand Name: Merrytek
Certification: CE & RED
Model Number: ATY-MC083VXXX

 

Detail Information

Product Name: Microwave Motion Sensor
Operating Voltage:198-264V AC 50/60Hz
Transmitting Power: 1mW Max.Rated Load:800W@230Vac (Inductive),1000W@230Vac(Resistive)
HF System: 5.8GHz ±75MHz, ISM Wave Band
Approval: CE, RED
Operation Temperature: -25℃…+60℃
Function:ON/OFF Function, 2-step Dimming Function, 3-step Dimming Function
IP Rating: IP20
Detecting Radius: 4-7m(mounting Height 8m)

High Light: 1mW Microwave Motion Sensor, 264V Lights Dimmable Motion Sensor, High Frequency Dimmable Motion Sensor

 

Product Description

European Style Dimmable Motion Sensor, Microwave Motion Sensor for Lights ATY-MC083VXXX
 

Description

- High installation for car parks, etc.
- Work with 1-10V dimmable LED driver, easy to achieve 2-step or 3-step dimming function.
- 5.8GHz high frequency microwave(C-Band license-free operation)
- DIP setting allows the user easy to adjust sensor parameters.
 

Function

ON-OFF function

1) Với đủ ánh sáng xung quanh, đèn sẽ không được bật ngay cả khi có tín hiệu chuyển động/ With sufficient ambient light, the light will not be switched on even if with motion signal.

2) Khi không đủ ánh sáng xung quanh, cảm biến sẽ bật đèn khi phát hiện chuyển động/ With insufficient ambient light, the sensor switches on the light when motion is detected.

3) Sau khi hết thời gian giữ, cảm biến sẽ tắt đèn khi không phát hiện thấy chuyển động/ After elapse of hold time, the sensor switches off the light when no motion is detected.

2-step dimming function

1) Nếu không có chuyển động nào được phát hiện, đèn sẽ luôn ở mức sáng yếu/ If there is no motion detected, the light will be remained at a low light level all the time.

2) Khi phát hiện chuyển động, cảm biến sẽ bật đèn sang độ sáng 100%/ When motion is detected, the sensor will switch on the light to 100% brghteness.

3) Sau khi hết thời gian giữ, cảm biến sẽ làm mờ ánh sáng ở mức ánh sáng yếu hiện tại nếu không phát hiện thấy chuyển động/ After elapse of hold time, the sensor dims the light at the present low light level if no motion is detected.


3-step dimming function

1) Với đủ ánh sáng xung quanh, đèn sẽ không được bật ngay cả khi có tín hiệu chuyển động/ With sufficient ambient light, the light will not be switched on even if with motion signal.

2) Khi không đủ ánh sáng xung quanh, cảm biến sẽ bật đèn khi phát hiện chuyển động/ With insufficient ambient light, the sensor switches on the light when motion is detected.

3) Sau khi hết thời gian giữ, cảm biến làm mờ ánh sáng ở mức ánh sáng yếu nếu không phát hiện thấy chuyển động mới/ After elapse of hold time, the sensor dims the light at a low light level if no new motion is detected.

4) Sau khi hết thời gian chờ, cảm biến sẽ tắt đèn nếu không phát hiện thấy chuyển động nào trong vùng phát hiện/ After elapse of standby period, the sensor switches off the light if no motion is detected in the detection zone.
 

Detection Pattern

Ceiling mounting        
*Only 100%/75%/50% detection sensitivity is workable when installed at 15m mounting height. 10% sensitivity is not able to detect motion signal.

Wall mounting    

Specifications

Operating voltage	198-264V AC 50/60Hz
Rated load	800W (Inductive), 1000W (Resistive) @230V AC
HF system	5.8GHz ±75MHz, ISM wave band
Stand-by Power	≤0.5W
Transmitting power	0.5mW Max.
Detection zone Max.(D x H)	6m x 15m
Motion detection	0.3~3m/s
Detection angle	150°(wall installation) 360°(ceiling installation)
IP rating	IP20
Operation temperature	-25℃…+60℃
Hold time	5S/ 30S/ 90S/ 3min/ 20min/ 30min
Detection Area	100%/ 75%/ 50%/ 10%
Daylight sensor	2Lux/ 5Lux/ 10Lux/ 25Lux/ 50Lux/ 100Lux/ Disable
Stand-by DIM Level	25% (2.2-2.5V)/ 35% (3.0-3.5V)/ 50% (5.0-5.5V)
Life time	50,000 hours
Guaranty	5 years

 

DIP Switch Setting

Detection Area

	1	2
Ⅰ	ON	ON	100%
Ⅱ	ON	-	75%
Ⅲ	-	ON	50%
Ⅳ	-	-	10%

 

Hold Time

	3	4	5
Ⅰ	ON	ON	ON	5s
Ⅱ	-	ON	ON	30s
Ⅲ	ON	-	ON	90s
Ⅳ	-	-	ON	3min
Ⅴ	ON	ON	-	20min
VI	-	-	-	30min

 

Stand-by Period

	6	7	8
Ⅰ	ON	ON	ON	0s
Ⅱ	-	ON	ON	5s
Ⅲ	ON	-	ON	5min
Ⅳ	-	-	ON	10min
Ⅴ	ON	ON	-	30min
VI	-	ON	-	60min
VII	-	-	-	+∞

 

Stand-by Dim Level

	1	2
Ⅰ	ON	ON	50%
Ⅱ	ON	-	35%
Ⅲ	-	-	25%

 

Daylight Sensor

	1	2	3	4	5	6
Ⅰ	ON	ON	ON	ON	ON	ON	2lux
Ⅱ	-	ON	ON	ON	ON	ON	5lux
Ⅲ	ON	-	ON	ON	ON	ON	15lux
Ⅳ	ON	ON	-	ON	ON	ON	25lux
Ⅴ	ON	ON	ON	-	ON	ON	50lux
VI	ON	ON	ON	ON	-	ON	100lux
VII	ON	ON	ON	ON	ON	-	Disable*

*Disable means the daylight sensor does not work. The sensor will turn on light once motion is detected regardless of ambient light level.

 

Đối với Model 

Merrytek MC083S RC

.. thì điều khiển bằng Remote MH10. Hướng dẫn điều khiển Remote MH10 ở đây.
 

Wiring diagram

*The sensor is designed to connect one load only. Connect more than one load may damage the sensor.
 

Function Diagram

 

Initialization

1/ On/Off function
After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it turns off the light. During the initialization, the sensor is not able to detect movement.

2/ 2-step dimming function
After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it dims the light to a low light level (set by stand-by dim level). During the initialization, the sensor is not able to detect movement.

3/ 3-step dimming function
After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it turns off the light. During the initialization, the sensor is not able to detect movement.
 

Factory Setting

Detection area: 100%, Hold Time: 5S,Daylight sensor: Disable, Detection mode: HS

Application Notice

1) The product can work with any kinds of control grear..

2) The sensor should be installed by a professional electrician. Please turn off the power before installing, wiring, High installation sensor MC083S RC Version: A0

3) The sensor mounted in a plastic, glass lampshade would reduce the sensitivity of the sensor. For every 3 mm increase in thickness, the sensitivity would reduce by 20%.

4) The sensing distance will be affected by the height of the sensor installation, the size of the object being detected, and the speed of movement.

5) Daylight the value is in a sunny environment with no shadows and ambient light diffuse reflection conditions. The values illumination detected by sensor may vary in different environment, at different times, in different seasons, and in different climates.

6) The parameters of the sensor may need to be reconfigured in different installation environments. Please refer to the following instructions or contact the manufacturer.

7) This sensor is for indoor use only. Outdoor use will affect the waterproof effect, wind and moving objects around would cause false triggering.

8) The distance between any inductive sensors should be greater than 3m.

9) When the sensor is installed in a metal illuminance , a metal reflective surface, or a narrow enclosed environment, the microwave will be reflected repeatedly and cause false triggering. Please reduce the sensitivity or contact the manufacturer for technical support.

10) Do not place the sensor close to high-density objects such as metal, glass, mixed-use walls, etc. The sensor may be triggered by mistake.

11) Please ensure that there are no moving signals around the sensor, such as fan, DC motor, sewer, air outlet, etc., the sensor may generate false triggers.
 

Applications

Car park, etc