Merrytek MC085S | IP65 microwave motion sensor -Cảm biến chuyển động kháng nước điều khiển đèn ngoài trời

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm MERRYTEK

• 

  Hướng dẫn sử dụng Bộ điều khiển cảm biến từ xa Merrytek Remote control MH10

• 

  Wiki: DALI (Digital Addressable Lighting Interface) là gì? Nguyên lý hoạt động và Ứng dụng

• Xem thêm

Cảm biến chuyển động kháng nước chống nhiễu Merrytek MC085S | IP65 microwave motion sensor

 

Basic Information

Place of Origin: China
Brand Name: Merrytek
Certification: CE, RED
Model Number: MC085S RA (Needle connector)
Model Number: MC085S RB (Lead connector)
Warranty: 5 years
 

Detail Information

Product Name: Microwave Motion Sensor
Operating Voltage Rage: 198-264V AC, 50Hz/60Hz
Rated Voltage: 220-240V AC, 50Hz/60Hz
Transmitting Power: 0.5mW Max.
Operating Frequency: 5.8 GHz ±75 MHz, ISM Band.
IP Rating: IP65
Detecting Radius: 4-6m (mounting Height 3m)
High Light: microwave sensors for lighting, floodlight motion sensor
 

Product Description

IP65 Needle / Lead Connector Microwave Motion Sensor ON / OFF Function
 
1. Needle connector or lead connector selectable, suitable for variety of fixture

2. Adopt patent RS antenna, RED approval, anti-interference for breeze & raindrop

3. Detection area, hold time and daylight sensor can be set by DIP switch

4. Two modes optional: Photocell function and Motion function

5. Detecting angle adjustable by horizontal and vertical

6. Quick switch ON/OFF 3 times within 2s to override sensor function

7. Anti-interference for breeze and raindrop

8. IP65 Rating for Water-proof. suitable for outdoor use

MC085S RA (Needle connector)



MC085S RB (Lead connector)

- Two connector can be selected: needle connector or lead connector, easy for installation.

- Detection area, hold time and daylight sensor can be set by DIP switch.

- Adopt Patent RS antenna ,RED approval ,Anti-interference for breeze & raindrop.

- Two modes optional: Photocell function and Motion function.

- Quick switch ON/OFF 3 times to override sensor function. Lights will switch on all the time.

- Water-proof housing with IP65 rating for outdoor use.

- 5 years warranty.
 

Parameter

Input
Operating Voltage Rage: 198-264V AC, 50Hz/60Hz
DC Input Voltage: N/A
Rated Voltage: 220-240V AC, 50Hz/60Hz
No-load Power: N/A
Stand-by Power: ≤0.5W
Surge Test: L--N: 1kV

Output
Working Mode: Photocell function or Motion function
Type of Load: Inductive or Resistive
Load Capacity: 400W (Inductive) ; 800W (Resistive)
Current of Load: N/A
Max. Surge Capacity: - 10A: 30A (50% Ipeak, twidth =500uS, 230Vac full load, cold start), 60A (50% Ipeak, twidth =200uS, 230Vac, full load, cold start); - 17A: 50A (50% Ipeak, twidth =500uS, 230Vac full load, cold start), 80A (50% Ipeak, twidth =200uS, 230Vac, full load, cold start) Wiring Method Needle Connector or Lead Connector

Sensor Parameters
Operating Frequency: 5.8 GHz ±75 MHz, ISM Band.
Transmitting power: 0.5mW Max.
Hold time: 5s/ 30s/ 1min/ 3min/ 20min/ 30min
Detection Sensitivity: 100%/ 75%/ 50%/ 25%
Daylight Sensor: 2Lux/ 10Lux/ 25Lux/ 50Lux/ 100Lux/ Disable
Daylight: open/ close: 10Lux/ 50Lux ; 25Lux/ 75Lux; 50Lux/ 100Lux; 100Lux/ 200Lux; 150Lux/ 300Lux; Disable
Detecting Radius: 4-6m (mounting height 3m) , see note 2
Mounting Height: 6m Max.
Detecting Angle: 150° (Wall mounted), 360° (Ceiling mounted)

Operating Environment
Operating Temperature: -20℃…+60℃
Storage Temperature: -40℃…+80℃(Humidity: 10%-95%)

Certificate Standards
Safety standards: EN61058-1
EMC standards: EN300440; EN301489-1; EN55015; EN61547; EN61000-3-2; EN61000-3-3; EN62479
Environmental Requirement: Compliant to RoHS
Certificate: CE

Others
Wiring: MC085S A Needle connector; MC085S B Lead connector with 260mm cable out
IP Rating: IP65
Protection Class: Class II
Installation: Independent installation
Dimension: Φ16mm
Package: Bubble bag+Clapboard + Carton（K=A）
Net Weight: 77.7g
Lifetime: 5 years warranty @Ta 230V full load

Note
1. “N/A”means not available.

2. Detection area is effected on volume of motion object and motion speed. The detection area is tested by a 165cm height person and walking speed is 0.5m/s.
 

Function

1)Motion ON-OFF Function

 With sufficient ambient light, the light will not be switched on. 


With insufficient ambient light, the sensor switches on the light when moion is detected


After elapse of hold time, the sensor switches off the light when no motion is detected
 

2) Photocell Night/Light Function

Automatically swtches on the light at dusk


Stays continuously illuminated throughout the light.


Switches off the lights at dawn
 

Dimension (mm)

MC085S RA (Needle Connector)



MC085S RB (Lead Connector)

 

Wiring

MC085S RA



MC085S RB


* The sensor is designed to connect one load only. Connect more than one load may damage the sensor.
 

Structure

 

Detection pattern

1）Ceiling mounting

Height：3m
Sensitivity：100%/ 75%/ 50%/ 25%


Normal moving (Speed：1m/s)


Slow moving (Speed 0.3m/s)

Height：6m
Sensitivity：100%/ 75%/ 50%


Normal moving (Speed：1m/s)


Slow moving (Speed 0.3m/s)
 

2) Walling mounting

Horizontal installation：2m
Sensor range setting：100%/ 75%/ 50%/ 25%


Normal walking (walking speed：1m/s)


Slow walking (walking speed：0.3m/s)
 

DIP Switch Setting

Detection Area (Sensitivity)


Hold Time


Daylight Threshold

* Disable means the daylight sensor does not work. The sensor will turn on light once motion is detected regardless of
ambient light level.

Photocell

*Disable means the daylight sensor does not work. The sensor will turn on light once motion is detected regardless of
ambient light level.

Mode Settings

 

Override Function

Quick switch ON/OFF 3 times within 2sec to override sensor function. Lights will switch on all the time.

Power off and on again to recover sensor function.
 

Factory Setting

Detection Area: 100%, Hold Time: 5S, Daylight Sensor: Disable, Mode Settings: Motion
 

Application Notice

When switch between the Photocell function and the Motion function , Please turn off the power first before change the mode.