ORDERING CODES
|
ATR244-12ABC
|
Power supply |
24..230 V AC / DC ±15% 50/60 Hz - galvanic isolation 2,5KV |
Power consumption |
6 Watt/VA |
Display |
4 digits 0,52'', 5 digits 0,30'' |
Analogue inputs |
1 x Ris. 16bit, programmable for thermocouples K, S, R, J, T, N, B (automatic compensation of cold junction-25..85°C, ±0,2% F.S. ±1 digit F.S.), Thermoresistances PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (β 3435K), process signals 0..10 V (50000 points), 0/4..20mA (40000 points), 0..60 mV (25000 points), potentiometer 1..150 KΩ (50000 points) |
Sampling time |
Programmable up to 2,1 ms (frequency up to 470 Hz) |
TA input |
- |
Digital inputs |
2x PNP |
Digital outputs |
2x SSR 12 / 24 V DC - 25 mA max |
Auxiliary Outputs |
12/24 VDC - 30mA max for sensor supply |
Relay Output |
2x 2 A - 250 V AC resistive load |
Analogue outputs |
1x Selection 4..20 mA (40000 points ± 0,2% F.S.) o 0..10 V DC (40000 points ± 0,2% F.S.) for command or retransmission PV / SPV |
Serial communication |
- |
USB |
1x micro USB for programming via PC with MyPixsysLab |