Phoenix Contact QUINT4-UPS/24DC/24DC/10 - 2907066 | Uninterruptible power supply -Bộ lưu điện UPS 24VDC 24VDC 10A

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Tất cả các Model Bộ lưu điện UPS DC của Phoenix Contact

• 

  Tất cả các model Lưu điện DC UPS Siemens | SITOP DC UPS uninterruptible power supplies

• Xem thêm

Bộ lưu điện UPS Phoenix Contact QUINT4-UPS/24DC/24DC/10 - 2907066 | Uninterruptible power supply 24VDC 24VDC 10A

 

Product Description

The intelligent QUINT UPS for integration into established industrial networks: your systems continue to be supplied with uninterrupted power, even in the event of a mains failure. The battery management system with IQ Technology and a powerful battery charger ensures superior system availability.
 

Your advantages

- Easy integration into networks using PROFINET, EtherNet/IP, EtherCAT® and USB interfaces
- Evaluation of state of health (SOH) and state of charge (SOC), thanks to the intelligent battery management system (BMS)
- Automatic recognition of the battery capacities and technologies (VRLA-WTR, LI-ION)
- Monitoring of output current and voltage, as well as manual connection and disconnection of the system
- SFB Technology selectively trips standard miniature circuit breakers. Loads connected in parallel continue working.
 

Drawings

Block diagram


Pictogram

 

Dimensions

Width	35 mm
Height	130 mm
Depth	125 mm
Width with alternative assembly	123 mm
Height with alternative assembly	130 mm
Depth with alternative assembly	37 mm
Installation distance right/left (active, passive)	0 mm / 0 mm (POut ≤50 %)
Installation distance right/left (passive)	0 mm / 0 mm (POut ≥50% )
Installation distance right/left (active)	5 mm / 5 mm (POut ≥50% )
Installation distance top/bottom (active, passive)	40 mm / 20 mm (POut ≤50 %)
Installation distance top/bottom (passive)	40 mm / 20 mm (POut ≥50% )
Installation distance top/bottom (active)	50 mm / 50 mm (POut ≥50% )

 

Ambient conditions

Degree of protection	IP20
Inflammability class in acc. with UL 94 (housing / terminal blocks)	V0
Ambient temperature (operation)	-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (start-up type tested)	-40 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Climatic class	3K3 (EN 60721)
Degree of pollution	2
Installation height	≤ 4000 m

 

Input data

Input voltage	24 V DC
Input voltage range	18 V DC ... 30 V DC
Electric strength, max.	35 V DC (Protected against polarity reversal)
Internal input fuse	no
Inrush current	≤ 7 A (≤ 4 ms)
Current consumption IN (UN, IOUT = IN, Icharge = 0)	10.1 A
Current consumption Imax (UN, IOUT = IStat.Boost, Icharge = max)	16.2 A
Current consumption INo-Load(UN, IOUT = 0, Icharge = 0)	48 mA
Current consumption Icharge (UN, IOUT = 0, Icharge = max)	3.5 A
Power consumption PN (UN, IOUT = IN, Icharge = 0)	241 W
Power consumption Pmax (UN, IOUT = IStat.Boost, Icharge = max)	384 W
Power consumption PNo-Load (UN, IOUT = 0, Icharge = 0)	1.2 W
Power consumption Pcharge (UN, IOUT = 0, Icharge = max)	90 W
Reverse polarity protection	yes
Fixed backup threshold	22 V DC
Switch-on time	max. 3 s
Voltage drop, input/output	0.4 V DC

 

Output data (general)

Short-circuit-proof	yes
No-load proof	yes
Switch-over time	0 ms
UPS connection in parallel	no
UPS connection in series	no
Energy storage device connection in parallel	Yes, 5 (observe line protection)
Energy storage device connection in series	no
Efficiency	typ. 98 %

 

Output data (mains operation)

Output voltage range	18 V DC ... 30 V DC (UOUT = UIN - 0.4 V DC)
	18 V DC ... 32 V DC
Static Boost (IStat.Boost)	12.5 A
Dynamic Boost (IDyn.Boost)	20 A (5 s)
Selective Fuse Breaking (ISFB)	60 A (15 ms)

 

Output data (battery operation)

Output voltage range	19 V DC ... 28 V DC (UOUT = UBAT - 0.4 V DC)
Static Boost (IStat.Boost)	12.5 A
Dynamic Boost (IDyn.Boost)	20 A (5 s)
Selective Fuse Breaking (ISFB)	60 A (15 ms)

 

Energy storage (battery)

Battery technology	VRLA, VRLA-WTR, LI-ION
Nominal voltage UN	24 V DC
End-of-charge voltage (temperature-compensated)	25 V DC ... 32 V DC
Max. capacity	80 Ah
Nominal capacity (without additional charger)	1.2 Ah ... 80 Ah
Charging current (configurable)	max. 3 A
Charging time	160 min. (7.2 Ah)
Buffer time	25 min. (7.2 Ah)
Temperature compensation (configurable)	42 mV/K
Temperature sensor	yes
Charge characteristic curve	IU0U
IQ-Technology	yes

 

General data

Inflammability class in acc. with UL 94 (housing / terminal blocks)	V0
MTBF (IEC 61709, SN 29500)	> 2065000 h (25 °C)
	> 1184000 h (40 °C)
	> 522600 h (60 °C)
Life expectancy (electrolytic capacitors)	137895 h
Weight	0.5 kg
Environmental protection directive	RoHS Directive 2011/65/EU
	WEEE
	Reach

 

Connection data, input

Connection method	Screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Single conductor/terminal point, stranded, with ferrule, min.	0.2 mm²
Single conductor/terminal point, stranded, with ferrule, max.	2.5 mm²
Conductor cross section AWG min.	30
Conductor cross section AWG max.	12
Stripping length	6.5 mm
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm

 

Connection data output

Connection method	Screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Single conductor/terminal point, stranded, with ferrule, min.	0.2 mm²
Single conductor/terminal point, stranded, with ferrule, max.	2.5 mm²
Conductor cross section AWG min.	30
Conductor cross section AWG max.	12
Stripping length	6.5 mm
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm

 

Connection data for battery

Connection method	Screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	30
Conductor cross section AWG max.	12
Stripping length	6.5 mm
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm

 

Standards

EMC requirements for noise immunity	EN 61000-6-1
	EN 61000-6-2
EMC requirements for noise emission	EN 61000-6-3
	EN 61000-6-4
Standard designation	Protective extra-low voltage
Standards/regulations	IEC 61010-1 (SELV)
	IEC 61010-2-201 (PELV)
Overvoltage category EN 61010-1	II (≤ 4000 m)
Overvoltage category EN 61010-2-201	II (≤ 4000 m)

 

Conformance/approvals

Designation	UL approval
Identification	UL/C-UL Listed UL 61010-1
Designation	UL approval
Identification	UL/C-UL Listed UL 61010-2-201
Designation	UL approval
Identification	UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
Designation	CSA
Identification	CAN/CSA-C22.2 No. 61010-1-12
Designation	CSA
Identification	CAN/CSA-IEC 61010-2-201
Designation	CSA
Identification	CAN/CSA-C22.2 No. 213 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
Designation	CB scheme
Identification	IEC 61010-1
	IEC 61010-2-201
Designation	DNV
Identification	Class Guideline DNVGL-CG-0339
Additional text	Location classes: Temperature D (see Application/Limitation), Humidity B, Vibration A/C, EMC B

 

EMC data

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge	EN 61000-4-2
Contact discharge	8 kV (Test Level 4)
Discharge in air	15 kV (Test Level 4)
Electromagnetic HF field	EN 61000-4-3
Frequency range	80 MHz ... 1 GHz
Test field strength	20 V/m (Test Level 3)
Frequency range	1 GHz ... 6 GHz
Test field strength	10 V/m (Test Level 3)
Frequency range	1 GHz ... 6 GHz
Test field strength	10 V/m (Test Level 3)
Comments	Criterion A
Fast transients (burst)	EN 61000-4-4
Input	4 kV (Test Level 4 - asymmetrical)
Output	4 kV (Test Level 4 - asymmetrical)
Signal	4 kV (Test Level 4 - asymmetrical)
Comments	Criterion B
Surge voltage load (surge)	EN 61000-4-5
Input	1 kV (Test Level 3 - symmetrical)
	2 kV (Test Level 3 - asymmetrical)
Output	1 kV (Test Level 3 - symmetrical)
	2 kV (Test Level 3 - asymmetrical)
Signal	1 kV (Test Level 2 - asymmetrical)
Comments	Criterion B
Conducted interference	EN 61000-4-6
I/O/S	asymmetrical
Frequency range	0.15 MHz ... 80 MHz
Voltage	10 V (Test Level 3)
Comments	Criterion A
Power frequency magnetic field	EN 61000-4-8
Frequency	16.67 Hz
	50 Hz
	60 Hz
Test field strength	100 A/m
Additional text	60 s
Comments	Criterion A
Frequency	50 Hz
	60 Hz
Frequency range	50 Hz ... 60 Hz
Test field strength	1 kA/m
Additional text	3 s
Frequency	0 Hz
Test field strength	300 A/m
Additional text	DC, 60 s
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.

 

Environmental Product Compliance

REACh SVHC	Lead 7439-92-1

 

Classifications

 

ECLASS

ECLASS 10.0.1	27040705
ECLASS 11.0	27040705
ECLASS 5.1	27242213
ECLASS 9.0	27040705

 

ETIM

ETIM 6.0	EC000382
ETIM 7.0	EC000382

 

UNSPSC

UNSPSC 13.2	39121004
UNSPSC 18.0	39121011
UNSPSC 19.0	39121011
UNSPSC 20.0	39121011
UNSPSC 21.0	39121011

 

- Xem chi tiết Tài liệu kỹ thuật/ Datasheet Phoenix Contact QUINT4-UPS/24DC/24DC/10 - 2907066

Tham khảo thêm các Model của dòng sản phẩm tương tự:

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/5 - 2906990

QUINT UPS with IQ Technology, for DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/5/USB - 2906991

QUINT UPS with IQ Technology, USB communication interface (Modbus/RTU), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/5/PN - 2906993

QUINT UPS with IQ Technology, RJ45 communication interfaces (PROFINET), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/5/EIP - 2906994

QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherNet/IP™), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/5/EC - 2906996

QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherCAT®), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/10 - 2907066

QUINT UPS with IQ Technology, for DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/10/USB - 2907067

QUINT UPS with IQ Technology, USB communication interface (Modbus/RTU), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/10/PN - 2907068

QUINT UPS with IQ Technology, RJ45 communication interfaces (PROFINET), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/10/EIP - 2907069

QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherNet/IP™), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/10/EC - 2907070

QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherCAT®), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/20 - 2907071

QUINT UPS with IQ Technology, for DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/20/USB - 2907072

QUINT UPS with IQ Technology, USB communication interface (Modbus/RTU), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/20/PN - 2907073

QUINT UPS with IQ Technology, RJ45 communication interfaces (PROFINET), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/20/EIP - 2907074

QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherNet/IP™), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/20/EC - 2907076

QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherCAT®), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/40 - 2907077

QUINT UPS with IQ Technology, for DIN rail mounting, input: 24 V DC, output: 24 V DC / 40 A, charging current: 5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/40/USB - 2907078

QUINT UPS with IQ Technology, USB communication interface (Modbus/RTU), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 40 A, charging current: 5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/40/PN - 2907079

QUINT UPS with IQ Technology, RJ45 communication interfaces (PROFINET), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 40 A, charging current: 5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/40/EIP - 2907080

QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherNet/IP™), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 40 A, charging current: 5 A
 

Uninterruptible power supply - QUINT4-UPS/24DC/24DC/40/EC - 2907081

QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherCAT®), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 40 A, charging current: 5 A
 

Uninterruptible power supply - QUINT-UPS/24DC/24DC/5 - 2320212

Uninterruptible power supply with IQ technology for DIN rail mounting, input: 24 V DC, output: 24 V DC/5 A, including mounted universal DIN rail adapter UTA 107/30
 

Uninterruptible power supply - QUINT-UPS/ 24DC/ 24DC/10 - 2320225

Uninterruptible power supply with IQ technology for DIN rail mounting, input: 24 V DC, output: 24 V DC/10 A, including mounted universal DIN rail adapter UTA 107/30
 

Uninterruptible power supply - QUINT-UPS/ 24DC/ 24DC/20 - 2320238

Uninterruptible power supply with IQ technology for DIN rail mounting, input: 24 V DC, output: 24 V DC/20 A, including mounted universal DIN rail adapter UTA 107/30
 

Uninterruptible power supply - QUINT-UPS/ 24DC/ 24DC/40 - 2320241

Uninterruptible power supply with IQ technology for DIN rail mounting, input: 24 V DC, output: 24 V DC/40 A, including mounted universal DIN rail adapter UTA 107/30
 

Uninterruptible power supply - QUINT-UPS/ 24DC/12DC/5/24DC/10 - 2320461

Uninterruptible power supply with IQ technology for DIN rail mounting, input: 24 V DC, output: 24 V DC/10 A and 12 V DC/5 A, including mounted universal DIN rail adapter UTA 107/30