Bộ cấp nguồn tín hiệu Pepperl+Fuchs S1SD-1AI-1C.H | 24VDC 2/3-Wire 0/4-20mA

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PEPPERL-FUCHS

• 

  Tìm hiểu về điều hòa, lọc nhiểu, khuếch đại, chuyển đổi tín hiệu điều khiển và đo lường MCR

• Xem thêm

Pepperl+Fuchs S1SD-1AI-1C.H là Bộ Smart transmitter power supply, 1-kênh signal conditioner, 24VDC, Input 2-wire 3-wire, Output 0-20mA/ 4-20mA

Technical data của Bộ cấp nguồn tín hiệu Pepperl+Fuchs S1SD-1AI-1C.H

General specifications
Signal type		Analog input
Operation time		MTBF: 339 a acc. to SN 29500 stationary continuous operating, average ambient temperature 40 °C (104 °F)
Supply
Connection		Power Bus or terminals 1-, 2+
Rated voltage		16.8 ... 31.2 V DC
Power dissipation		0.9 W
Power consumption		1.3 W
Input
Connection side		field side
Connection		terminals 5+, 6, 7-
Input signal		0/4 ... 20 mA
Open circuit voltage/short-circuit current		≤ 22 V / 30 mA
Input resistance		max. 50 Ω
Transmission range		linearity range: -1 ... 110 %
Available voltage		16 V at 20 mA
Output
Connection side		control side
Connection		terminals 3-, 4+
Analog current output		0/4 ... 20 mA, load ≤ 600 Ω
Ripple		≤ 10 mV eff
Transfer characteristics
Accuracy		max. 0.1 % of full-scale value
Influence of ambient temperature		< 100 ppm/K of full-scale value
Rise time/fall time		≤ 3.5 ms
Galvanic isolation
Output/power supply		safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Input/Other circuits		safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Indicators/settings
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529:2001
Protection against electrical shock		EN 61010-1:2010
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Damaging gas		designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Core cross-section		0.5 ... 2.5 mm2 (20 ... 14 AWG)
Mass		approx. 70 g
Dimensions		6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
Certificate		DEMKO 16 ATEX 1750X
	Marking	II 3G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-15:2010
International approvals
UL approval		E106378
IECEx approval		IECEx UL 16.0116X
	Approved for	Ex nA IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

- Xem chi tiết Tài liệu kỹ thuật/ Datasheet S1SD-1AI-1C.H Pepperl+Fuchs SMART Transmitter power supply