Bộ khởi động động cơ hybrid Phoenix Contact ELR W3- 24DC/500AC- 2I - 2297031

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Model các mô-đun khởi động động cơ Siemens ET 200S IM151

• 

  Khởi động động cơ Siemens ET 200pro -Thông số kỹ thuật và Tất cả models

• Xem thêm

Bộ khởi động động cơ hybrid Phoenix Contact ELR W3- 24DC/500AC- 2I - 2297031

 

 

Thông số kỹ thuật

Thuộc tính sản phẩm

Product type	Hybrid motor starter
Operating mode	100% operating factor

 

Thuộc tính về điện

Number of phases	3
Motor starter type	Reversing starter
Maximum power dissipation for nominal condition	2.2 W
Switching frequency	≤ 2 Hz (Load-dependent)
Maximum power dissipation	3.3 W
Minimum power dissipation	1.1 W
Supply
Rated control circuit supply voltage US	24 V DC
Control supply voltage range	19.2 V DC ... 30 V DC
Rated control supply current IS	40 mA
Protective circuit	Surge protection
	Reverse polarity protection
Insulation characteristics
Rated insulation voltage	500 V
Rated surge voltage	6 kV
Overvoltage category	III
Degree of pollution	2
Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit	Safe isolation (IEC 60947-1) at operating voltage ≤ 300 V AC
	Basic insulation (IEC 60947-1) at operating voltage 300 V AC ... 500 V AC
Isolation characteristics between the control input and control supply voltage to auxiliary circuit	Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC

 

Thông số đầu vào

Control
Input name	Control input right/left
Rated actuating voltage UC	24 V DC
Triggering voltage range	19.2 V DC ... 30 V DC
Rated actuating current IC	5 mA
Switching threshold	9.6 V (“0” signal)
	19.2 V (“1” signal)
Switching level	< 5 V DC (For EMERGENCY STOP)
Typical response time	< 35 ms
Typical turn-off time	< 40 ms

 

Thông số đầu ra

AC output
Rated operating voltage Ue	500 V AC
Operating voltage range	42 V AC ... 550 V AC
Rated operating current Ie	2.4 A (AC-51)
	2.4 A (AC-53a)
Mains frequency	50/60 Hz
Load current range	180 mA ... 2.4 A (see to derating)
Trigger characteristic in acc. with IEC 60947-4-2	Class 10A
Cooling time	20 min. (for auto reset)
Leakage current	0 mA
Residual voltage	< 0.3 V
Surge current	100 A (t = 10 ms)
Protective circuit	Surge protection
Acknowledge output
Note	Confirmation: floating change-over contact, signal contact
Contact type	1 changeover contact
Switching capacity according to IEC 60947-5-1	3 A (230 V, AC15)
	2 A (24 V, DC13)
Residual voltage	< 0.5 V

 

Thông số kết nối

Control circuits
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section solid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm
	5 lbf-in. ... 7 lbf-in.
Load circuit
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section solid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm
	5 lbf-in. ... 7 lbf-in.

 

Thông số LED tín hiệu

Status display	Yellow LED
Operating voltage display	Green LED
Error indication	Red LED

 

Thông số kích thước

Width	22.5 mm
Height	107 mm
Depth	114 mm

 

Thông số vật liệu

Flammability rating according to UL 94

V0 (Housing)

 

Điều kiện môi trường vận hành và Mức bảo vệ

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m

 

Approval data

UKCA
Certificate	UKCA-compliant
ATEX
Identification	 II (2) G [Ex e] [Ex d] [Ex px]
	 II (2) D [Ex t] [Ex p]
Certificate	PTB 07 ATEX 3145
UL approval
Certificate	NLDX.E228652
Safety Integrity Level (SIL, IEC 61508)
Identification	≤ 3
Note	Safe shutdown
Safety Integrity Level (SIL, IEC 61508)
Identification	2
Note	Motor protection
Performance Level (ISO 13849)
Identification	≤ e
Note	Safe shutdown
Category (ISO 13849)
Identification	≤ 3
Note	Safe shutdown
UL data
SCCR	100 kA (500 V AC (fuse: 30 A class CC/30 A class J (high fault)))
	5 kA (500 V AC (fuse: 20 A RK5 (standard fault)))
FLA	2.4 A (500 V AC)
Group installation	20 A (class RK5, SCCR 5kA, #24 - 14 AWG max. solid and stranded)
	30 A (class CC or J, SCCR 100kA, #24 - 14 AWG max, solid and stranded)
Category code	NLDX

 

Quy-Chuẩn

Standards/regulations
Standards/regulations	EN 60947
	IEC 61508
	ISO 13849

 

Thông số lắp đặt

Mounting type	DIN rail mounting
Assembly instructions	Can be aligned with spacing = 20 mm
Mounting position	Vertical (horizontal DIN rail)

 

Thông số thương mại

Item number	2297031
Packing unit	1 pc
Minimum order quantity	1 pc
Product Key	CK7412
Catalog Page	Page 18 (C-7-2013)
GTIN	4046356167864
Weight per Piece (including packing)	315.4 g
Weight per Piece (excluding packing)	282.7 g
Customs tariff number	85371098
Country of origin	DE

- Tài liệu kỹ thuật Phoenix Contact ELR W3- 24DC/500AC- 2I - 2297031 ở đây.


Tham khảo thêm các model khác cùng loại:
Hybrid motor starters
ELR W3- 24DC/500AC- 2I - Hybrid motor starter
2297031
"4 in 1" three-phase semiconductor reversing contactor with 24 V DC input, 2 A output current, emergency stop function, and adjustable overload shutdown.

ELR H5-I-SC- 24DC/500AC-2 - Hybrid motor starter
2900574
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown, and screw connection.

ELR W3- 24DC/500AC- 9I - Hybrid motor starter
2297057
"4 in 1" three-phase semiconductor reversing contactor with 24 V DC input, 9 A output current, emergency stop function, and adjustable overload switching.

ELR H5-IES-SC- 24DC/500AC-2 - Hybrid motor starter
2900414
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3 / PL e and screw connection

ELR H5-IES-SC- 24DC/500AC-9 - Hybrid motor starter
2900421
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and screw connection.

ELR H3-I-SC- 24DC/500AC-2 - Hybrid motor starter
2900543
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown, and screw connection.

ELR H5-IES-PT- 24DC/500AC-9 - Hybrid motor starter
2903906
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e and push-in connection

ELR H5-IES-PT- 24DC/500AC-2 - Hybrid motor starter
2903904
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e and push-in connection

ELR H3-I-PT- 24DC/500AC-2 - Hybrid motor starter
2903922
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown, and push-in connection.

ELR H3-IES-PT- 24DC/500AC-2 - Hybrid motor starter
2903916
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and push-in connection.

ELR W3-230AC/500AC- 9I - Hybrid motor starter
2297060
"4 in 1" three-phase semiconductor reversing contactor with 230 V AC input, 9 A output current, emergency stop function, and adjustable overload switching.

ELR H3-I-SC- 24DC/500AC-9 - Hybrid motor starter
2900545
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, and screw connection.

ELR H5-IES-PT/500AC-3-IFS - Hybrid motor starter
2905139
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 3 A output current, with adjustable overload shutdown, emergency stop function to SIL 3 / PL e and push-in connection, DIN rail connector provided.

ELR H5-I-SC- 24DC/500AC-9 - Hybrid motor starter
2900576
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, and screw connection.

ELR H5-IES-PT-24DC/500AC-2-T - Hybrid motor starter
2906059
Hybrid motor starter; functions: Start motor, Reverse motor, Motor protection, Emergency stop, Higher resistance to transient voltages; input: 24 V DC; output: 3~, 500 V AC, 2.4 A; connection method: Push-in connection

ELR H5-IES-PT/500AC-9-IFS - Hybrid motor starter
2905140
Networkable hybrid motor starter for reversing of 3~ AC motors up to 500 V AC and 9 A output current, with adjustable overload shutdown, emergency stop function to SIL 3 / PL e and push-in connection, DIN rail connector provided.

ELR H3-IES-SC- 24DC/500AC-9 - Hybrid motor starter
2900569
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL3 /PL e, and screw connection.

ELR H5-I-PT- 24DC/500AC-2 - Hybrid motor starter
2903910
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown, and push-in connection.

ELR H5-IES-SC-230AC/500AC-9 - Hybrid motor starter
2900422
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 230 V AC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e

ELR H3-IES-SC- 24DC/500AC-2 - Hybrid motor starter
2900567
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e and, screw connection.

ELR H3-IES-PT- 24DC/500AC-9 - Hybrid motor starter
2903918
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and push-in connection.

ELR H3-I-PT- 24DC/500AC-9 - Hybrid motor starter
2903924
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, and push-in connection.

ELR H3-IES-PT/500AC-9-IOL - Hybrid motor starter
2908672
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and Push-in connection. Connection to IO-Link.

ELR H3-IES-SC-230AC/500AC-9 - Hybrid motor starter
2900570
Hybrid motor starter for starting 3~ AC motors up to 550 V AC, with 230 V AC input, 9 A output current, emergency stop function, and adjustable overload shutdown.

ELR H5-SC- 24DC/500AC-9 - Hybrid motor starter
2900538
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, and screw connection.

ELR H5-IES-PT-24DC/500AC-9-T - Hybrid motor starter
2906060
Hybrid motor starter; functions: Start motor, Reverse motor, Motor protection, Emergency stop, Higher resistance to transient voltages; input: 24 V DC; output: 3~, 500 V AC, 9 A; connection method: Push-in connection

ELR W3-230AC/500AC- 2I - Hybrid motor starter
2297044
"4 in 1" three-phase semiconductor reversing contactor with 230 V AC input, 2 A output current, emergency stop function, and adjustable overload shutdown.

ELR H3-IES-SC-230AC/500AC-2 - Hybrid motor starter
2900568
Hybrid motor starter for starting 3~  AC motors up to 550 V AC, with 230 V AC input, 2.4 A output current, emergency stop function, and adjustable overload shutdown.

ELR H3-IES-PT-24DC/500AC-06-T - Hybrid motor starter
2906061
Hybrid motor starter; functions: Start motor, Motor protection, Emergency stop, Higher resistance to transient voltages; input: 24 V DC; output: 3~, 500 V AC, 600 mA; connection method: Push-in connection

ELR H5-IES-PT/500AC-06-IFS - Hybrid motor starter
2905138
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 0.6 A output current, with adjustable overload shutdown, emergency stop function to SIL 3 / PL e and push-in connection, DIN rail connector provided.

ELR H5-IS-SC- 24DC/500AC-3-P - Hybrid motor starter
2908699
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 3 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.

ELR H5-IES-PT-24DC/500AC-06-T - Hybrid motor starter
2906058
Hybrid motor starter; functions: Start motor, Reverse motor, Motor protection, Emergency stop, Higher resistance to transient voltages; input: 24 V DC; output: 3~, 500 V AC, 600 mA; connection method: Push-in connection

ELR H3-IS-PT- 24DC/500AC-3-P - Hybrid motor starter
2909570
Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 3 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.

ELR H3-IES-PT-24DC/500AC-9-T - Hybrid motor starter
2906064
Hybrid motor starter; functions: Start motor, Motor protection, Emergency stop, Higher resistance to transient voltages; input: 24 V DC; output: 3~, 500 V AC, 9 A; connection method: Push-in connection

ELR H5-IES-SC-230AC/500AC-2 - Hybrid motor starter
2900420
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2.4 A output current, with 230 V AC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e

ELR H5-IS-PT- 24DC/500AC-9-P - Hybrid motor starter
2909567
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 9 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.

ELR H3-IES-PT/500AC-3-IOL - Hybrid motor starter
2908671
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC and 3 A output current, with adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and Push-in connection. Connection to IO-Link.

ELR H5-I-SC- 24DC/500AC-0,6 - Hybrid motor starter
2900573
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown, and screw connection.

ELR H5-IES-SC/500AC-3-IFS - Hybrid motor starter
2905152
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC, and 3 A output current, with adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and screw connection, DIN rail connector provided.

ELR H3-SC- 24DC/500AC-9 - Hybrid motor starter
2900530
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage and screw connection.

ELR H5-IS-SC- 24DC/500AC-9-P - Hybrid motor starter
2908697
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 9 A, provides motor protection and emergency stop up to SIL 3 / PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.

ELR H3-I-PT- 24DC/500AC-0,6 - Hybrid motor starter
2903920
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown, and push-in connection.

ELR H5-IES-PT- 24DC/500AC-0,6 - Hybrid motor starter
2903902
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e and push-in connection

ELR H5-IES-SC/500AC-06-IFS - Hybrid motor starter
2905151
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC, and 0.6 A output current, with adjustable overload shutdown, emergency stop function to SIL 3/PL e and screw connection, DIN rail connector provided.

ELR H5-I-SC-24DC/500AC-2-L - Hybrid motor starter
2905513
Hybrid motor starter, for reversing 3~ AC motors up to 550 V AC/2.4 A, 24 V DC input, class 10 tripping characteristic, overload function, without symmetry monitoring, and without phase failure and underload detection. 1-phase motors can be switched.

ELR H5-IES-SC- 24DC/500AC-0,6 - Hybrid motor starter
2900582
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and screw connection.

ELR H5-ES-SC- 24DC/500AC-2 - Hybrid motor starter
2900559
Hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 2.4 A output current, and emergency stop function.

ELR H5-I-PT- 24DC/500AC-9 - Hybrid motor starter
2903912
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, and push-in connection.

ELR H3-IES-PT/500AC-3-IFS - Hybrid motor starter
2905142
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC, output current: 3 A, emergency stop function, adjustable overload shutdown, and Push-in connection, DIN rail connector provided.

ELR H3-IES-PT- 24DC/500AC-0,6 - Hybrid motor starter
2903914
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and push-in connection.

ELR H3-I-SC- 24DC/500AC-0,6 - Hybrid motor starter
2900542
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown, and screw connection.

ELR H5-I-PT- 24DC/500AC-0,6 - Hybrid motor starter
2903908
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown, and push-in connection.

ELR H3-IES-SC- 24DC/500AC-0,6 - Hybrid motor starter
2900566
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL3 /PL e, and screw connection.

ELR H3-I-PT- 24DC/500AC-9-P - Hybrid motor starter
2909561
Hybrid motor starter as an alternative to a conventional contactor circuit. Starts 3~ AC motors up to 9 A and offers motor protection. Possible supply and relay extension via DIN rail connector.

ELR H5-ES-SC- 24DC/500AC-9 - Hybrid motor starter
2900561
Hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 9 A output current, and emergency stop function.

ELR H3-I-SC- 24DC/500AC-3-P - Hybrid motor starter
2908696
Hybrid motor starter as an alternative to a conventional contactor circuit. Starts 3~ AC motors up to 3 A and offers motor protection. Possible supply and relay extension via DIN rail connector.

ELR H5-I-SC- 24DC/500AC-3-P - Hybrid motor starter
2908695
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 3 A and offers motor protection. Possible supply and relay extension via DIN rail connector.

ELR H5-IES-PT/500AC-9-IOL - Hybrid motor starter
2908670
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and Push-in connection. Connection to IO-Link.

ELR H3-IS-PT- 24DC/500AC-9-P - Hybrid motor starter
2909568
Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 9 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.

ELR H3-IES-PT- 24DC/500AC-9-P - Hybrid motor starter
2909555
Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 9 A, provides motor protection, ATEX, and emergency stop up to SIL 3. Group shut-down, supply, and relay extension possible via DIN rail connector.

ELR H3-IES-PT/500AC-9-IFS - Hybrid motor starter
2905143
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC, output current: 9 A, emergency stop function, adjustable overload shutdown, and Push-in connection, DIN rail connector provided.

ELR H3-IES-PT- 24DC/500AC-3-P - Hybrid motor starter
2909557
Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 3 A, provides motor protection, ATEX, and emergency stop up to SIL 3. Group shut-down, supply, and relay extension possible via DIN rail connector.

ELR H5-IES-SC/500AC-9-IFS - Hybrid motor starter
2905153
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and screw connection, DIN rail connector provided.

ELR H5-I-PT-24DC/500AC-2-L - Hybrid motor starter
1199926
Hybrid motor starter, for reversing 3~ AC motors up to 550 V AC/2.4 A, 24 V DC input, class 10 tripping characteristic, overload function, without symmetry monitoring, and without phase failure and underload detection. 1-phase motors can be switched.

ELR H5-IES-PT- 24DC/500AC-3-P - Hybrid motor starter
2909556
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 3 A, provides motor protection, ATEX, and emergency stop up to SIL 3. Group shut-down, supply, and relay extension possible via DIN rail connector.

ELR H3-IES-PT-24DC/500AC-2-T - Hybrid motor starter
2906062
Hybrid motor starter; functions: Start motor, Motor protection, Emergency stop, Higher resistance to transient voltages; input: 24 V DC; output: 3~, 500 V AC, 2.4 A; connection method: Push-in connection

ELR H3-IES-SC/500AC-9-IFS - Hybrid motor starter
2905156
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC, output current: 9 A, emergency stop function, adjustable overload shutdown, and screw connection, DIN rail connector provided.

ELR H5-IES-PT- 24DC/500AC-9-P - Hybrid motor starter
2909554
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 9 A, provides motor protection, ATEX, and emergency stop up to SIL 3. Group shut-down, supply, and relay extension possible via DIN rail connector.

ELR H5-IES-PT/500AC-3-IOL - Hybrid motor starter
2908669
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 3 A output current, with adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and Push-in connection. Connection to IO-Link.

ELR H3-I-PT- 24DC/500AC-3-P - Hybrid motor starter
2909563
Hybrid motor starter as an alternative to a conventional contactor circuit. Starts 3~ AC motors up to 3 A and offers motor protection. Possible supply and relay extension via DIN rail connector.

ELR H5-I-PT- 24DC/500AC-9-P02 - Hybrid motor starter
1160740
Modular hybrid motor starter for starting and reversing motors incl. motor protection and rotary field monitoring, input: 24 V DC, output: 3~, 500 V AC, 9 A, connection method: Push-in connection

EM-2RSC/21AU-R/L-P - Extension module
2908701
Relay extension module for ELR-...-P hybrid motor starters, feedback of forward and reverse running when control signal is present, screw connection, DIN rail connector included

ELR H5-IS-PT- 24DC/500AC-3-P - Hybrid motor starter
2909569
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 3 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.

ELR H5-I-PT- 24DC/500AC-9-P - Hybrid motor starter
2909560
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 9 A and offers motor protection. Possible supply and relay extension via DIN rail connector.

ELR H5-I-SC- 24DC/500AC-9-P - Hybrid motor starter
2908693
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 9 A and offers motor protection. Possible supply and relay extension via DIN rail connector.

ELR H5-I-PT- 24DC/500AC-3-P - Hybrid motor starter
2909562
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 3 A and offers motor protection. Possible supply and relay extension via DIN rail connector.

EM-2RPT/21AU-R/L-P - Extension module
2909573
Relay extension module for ELR-...-P hybrid motor starters, feedback of forward and reverse running when control signal is present, Push-in connection, DIN rail connector included

ELR H3-IS-SC- 24DC/500AC-3-P - Hybrid motor starter
2908700
Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 3 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.

ELR H3-IES-SC/500AC-3-IFS - Hybrid motor starter
2905155
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC, output current: 3 A, emergency stop function, adjustable overload shutdown, and screw connection, DIN rail connector provided.

ELR H3-IS-SC- 24DC/500AC-9-P - Hybrid motor starter
2908698
Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 9 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.

ELR H3-I-SC- 24DC/500AC-9-P - Hybrid motor starter
2908694
Hybrid motor starter as an alternative to a conventional contactor circuit. Starts 3~ AC motors up to 9 A and offers motor protection. Possible supply and relay extension via DIN rail connector.

ELR H3-I-PT/500AC-3-IFS - Hybrid motor starter
2905149
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC, output current: 3 A, adjustable overload shutdown, and Push-in connection, DIN rail connector provided.

ELR H5-I-PT/500AC-3-IFS - Hybrid motor starter
2905146
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC, output current: 3 A, adjustable overload shutdown, and Push-in connection, DIN rail connector provided.

ELR H3-I-PT/500AC-9-IFS - Hybrid motor starter
2905150
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC, output current: 9 A, adjustable overload shutdown, and Push-in connection, DIN rail connector provided.

ELR H3-I-SC/500AC-3-IFS - Hybrid motor starter
2905163
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC, output current: 3 A, adjustable overload shutdown, and screw connection, DIN rail connector provided.

ELR H5-I-SC/500AC-3-IFS - Hybrid motor starter
2905159
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC, output current: 3 A, adjustable overload shutdown, and screw connection, DIN rail connector provided.

ELR H3-I-SC/500AC-9-IFS - Hybrid motor starter
2905164
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC, output current: 9 A, adjustable overload shutdown, and screw connection, DIN rail connector provided.

ELR H5-I-SC/500AC-9-IFS - Hybrid motor starter
2905160
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC, output current: 9 A, adjustable overload shutdown, and screw connection, DIN rail connector provided.

ELR H5-I-PT/500AC-9-IFS - Hybrid motor starter
2905147
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC, output current: 9 A, adjustable overload shutdown, and Push-in connection, DIN rail connector provided.

Motor starters for DC motors
ELR W1/ 6-24DC - Reversing load relay
2982090
Electronic reversing load relay, for controlling DC motors, with LED display and protective circuit, output: 10 - 30 V DC/6 A with a switch-over time of 80 ms

PLC-SC-ELR W1/ 2-24DC - Reversing load relay
2980539
PLC-INTERFACE as an electronic reversing load relay, consisting of PLC-BSC.../21 basic terminal block with screw connection and integrated circuit, for driving DC motors, with LED and protective circuit, output: 10 ... 30 V DC/2 A

ELR W1/ 6-24DC/RDT - Reversing load relay
2982757
Electronic reversing load relay, for controlling DC motors, with LED display and protective circuit, output: 10 - 30 V DC/6 A with a switch-over time of 1 ms

PLC-PT-ELR W1/ 2-24DC - Reversing load relay
1069556
PLC-INTERFACE as an electronic reversing load relay, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and integrated circuit, for driving DC motors, with LED display and protective circuit, output: 10 ... 30 V DC/2 A

ELR W1/ 2-24DC - Reversing load relay
2963598
Electronic reversing load relay, for driving DC motors, with light indicator and protection circuit, output: 10-30 V DC/2 A

Solid-state contactors
ELR W3/ 9-500 - Reversing load relay
2964186
Electronic reversing load relay, for direct driving of equipment in the 3-phase network, with light indicator and protection circuit, output: 110-550 V AC/3 x 9 A

ELR 1-SC-24DC/600AC-30 - Solid-state contactor
1032921
Single-phase solid-state contactor, input voltage: 24 V DC, output current: 30 A, zero voltage switch

ELR 1-SC-24DC/600AC-50 - Solid-state contactor
1032926
Single-phase solid-state contactor, input voltage: 24 V DC, output current: 50 A, zero voltage switch

ELR 1-SC-24DC/600AC-20 - Solid-state contactor
1032919
Single-phase solid-state contactor, input voltage: 24 V DC, output current: 20 A, zero voltage switch

ELR 1-SC-230AC/600AC-30 - Solid-state contactor
1032922
Single-phase solid-state contactor, input voltage: 230 V AC, output current: 30 A, zero voltage switch

ELR W3- 24DC/500AC- 9 - Solid-state reversing contactor
2297316
Three-phase solid-state reversing contactor with 24 V DC input, 9 A output current, zero voltage switch, optionally with thermal fuse

ELR W3- 24DC/500AC- 2 - Solid-state reversing contactor
2297293
Three-phase solid-state reversing contactor with 24 V DC input, 2 A output current, zero voltage switch, optionally with thermal fuse

ELR W2+1- 24DC/500AC-37 - Solid-state reversing contactor
2297374
Three-phase solid-state reversing contactor with 24 V DC input, 37 A output current, zero voltage switch, optionally with thermal fuse

ELR 1-SC-230AC/600AC-20 - Solid-state contactor
1032920
Single-phase solid-state contactor, input voltage: 230 V AC, output current: 20 A, zero voltage switch

ELR 1-SC-230AC/600AC-50 - Solid-state contactor
1032927
Single-phase solid-state contactor, input voltage: 230 V AC, output current: 50 A, zero voltage switch

Speed Starters with intuitive operation
CSS 1.5-1/3-EMC - Speed starter
1201642
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 1.5 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, single-phase load input, with integrated EMC filter

EM-CSS-MOTORSHIELD-45 - Shield connection
1276916
Shroud for motor lines for 45 mm wide CONTACTRON Speed Starters

EM-CSS-FAN-35 - Fan
1276911
Replaceable fan for 35 mm wide CONTACTRON Speed Starters

EM-CSS-MOTORSHIELD-35 - Shield connection
1276914
Shroud for motor lines for 35 mm wide CONTACTRON Speed Starters

EM-CSS-SHIELDING-SET-SCC-45 - Shield connection
1451208
Accessories set for easy and reliable connection of cable shields to the CONTACTRON Speed Starter, consisting of a 45 mm shroud, two shield-connection clamps for the signal lines, and one shield-connection clamp for the motor cable.

EM-CSS-SHIELDING-SET-SCC-35 - Shield connection
1451206
Accessories set for easy and reliable connection of cable shields to the CONTACTRON Speed Starter, consisting of a 35 mm shroud, two shield-connection clamps for the signal lines, and one shield-connection clamp for the motor cable.

EM-CSS-CONTROLSHIELD-35 - Shield connection
1276904
Shroud for control lines for 35 mm wide CONTACTRON Speed Starters

EM-CSS-CONTROLSHIELD-45 - Shield connection
1276909
Shroud for control lines for 45 mm wide CONTACTRON Speed Starters

EM-CSS-FAN-45 - Fan
1276912
Replaceable fan for 45 mm wide CONTACTRON Speed Starters

CSS 1.5-3/3-EMC - Speed starter
1201696
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 1.5 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input, with integrated EMC filter

CSS 0.25-1/3 - Speed starter
1201132
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 0.25 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, single-phase load input

CSS 0.37-1/3 - Speed starter
1201135
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 0.37 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, single-phase load input

CSS 0.25-3/3-EMC - Speed starter
1201713
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 0.25 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input, with integrated EMC filter

CSS 1.5-1/3 - Speed starter
1201511
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 1.5 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, single-phase load input

CSS 0.25-1/3-EMC - Speed starter
1201520
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 0.25 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, single-phase load input, with integrated EMC filter

CSS 0.75-3/3 - Speed starter
1201695
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 0.75 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input

CSS 1.5-3/3 - Speed starter
1201650
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 1.5 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input

CSS 0.55-3/3 - Speed starter
1201694
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 0.55 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input

CSS 0.55-3/3-EMC - Speed starter
1201828
Speed starter with soft start and configurable speed for starting and reversing motors up to 480 V AC and 0.55 kW, configurable motor protection, STO function up to SIL 3 / PL e, Push-in connection, three-phase load input, with integrated EMC filter

CSS 0.37-1/3-EMC