Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414 | 3AC-500V 2.4A 24VDC SIL3-PL

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Khởi động động cơ Siemens ET 200pro -Thông số kỹ thuật và Tất cả models

• 

  khởi động động cơ Siemens SIRIUS M200D

• Xem thêm

Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414 là Khởi động động cơ 3AC-500V 2.4A 24VDC SIL3-PL

- Tài liệu kỹ thuật Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414 ở đây.

 

Technical data của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

Product properties của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

Product type	Hybrid motor starters
Product family	CONTACTRON
Operating mode	100% operating factor

 

Electrical properties của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

Number of phases	3
Motor starter type	Reversing starter
Switching frequency	≤ 2 Hz (Load-dependent)
Maximum power dissipation for nominal condition	2.2 W
Switching frequency	≤ 2 Hz (Load-dependent)
Maximum power dissipation	3.3 W
Minimum power dissipation	1.1 W
Coordination type	1
Supply
Rated control circuit supply voltage US	24 V DC
Control supply voltage range	19.2 V DC ... 30 V DC
Rated control supply current IS	40 mA
Protective circuit	Surge protection
	Reverse polarity protection
Insulation characteristics
Rated insulation voltage	500 V
Rated surge voltage	6 kV
Overvoltage category	III
Degree of pollution	2
Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit	Safe isolation (IEC 60947-1) at operating voltage ≤ 300 V AC
	Basic insulation (IEC 60947-1) at operating voltage 300 V AC ... 500 V AC
Isolation characteristics between the control input and control supply voltage to auxiliary circuit	Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC

 

Input data của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

Control
Input name	Control input right/left
Rated actuating voltage UC	24 V DC
Triggering voltage range	19.2 V DC ... 30 V DC
Rated actuating current IC	5 mA (Input type 1)
Switching threshold	9.6 V (“0” signal)
	19.2 V (“1” signal)
Switching level	< 5 V DC (For EMERGENCY STOP)
Typical turn-off time	< 30 ms
Protective circuit	Reverse polarity protection

 

Output data của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

AC output
Rated operating voltage Ue	500 V AC
Operating voltage range	42 V AC ... 550 V AC
Rated operating current Ie	2.4 A (AC-51)
	2.4 A (AC-53a)
Mains frequency	50/60 Hz
Load current range	180 mA ... 2.4 A (see to derating)
Trigger characteristic in acc. with IEC 60947-4-2	Class 10A
Cooling time	20 min (for auto reset)
Leakage current	0 mA
Protective circuit	Surge protection
Acknowledge output
Note	Confirmation: floating change-over contact, signal contact
Contact switching type	1 changeover contact
Switching capacity in accordance with IEC 60947-5-1	3 A (230 V, AC15)
	2 A (24 V (DC13))

 

Connection data của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

Control circuits
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm
	5 lbf-in. ... 7 lbf-in.
Load circuit
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm
	5 lbf-in. ... 7 lbf-in.

 

Signaling của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

Status display	LED (yellow)
Operating voltage display	Green LED
Error indication	Red LED

 

Dimensions của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

Width	22.5 mm
Height	107 mm
Depth	114 mm

 

Material specifications của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

Flammability rating according to UL 94

V0 (Housing)

 

Environmental and real-life conditions của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m

 

Approvals của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

UKCA
Certificate	UKCA-compliant
ATEX
Identification	 II (2) G [Ex e] [Ex d] [Ex px]
	 II (2) D [Ex t] [Ex p]
Certificate	PTB 07 ATEX 3145
UL approval
Certificate	NLDX.E228652
Safety Integrity Level (SIL, IEC 61508)
Identification	≤ 3
Note	Safe shutdown
Safety Integrity Level (SIL, IEC 61508)
Identification	2
Note	Motor protection
Performance Level (ISO 13849)
Identification	≤ e
Note	Safe shutdown
Category (ISO 13849)
Identification	≤ 3
Note	Safe shutdown
UL data
SCCR	100 kA (500 V AC (fuse: 30 A class CC/30 A class J (high fault)))
	5 kA (500 V AC (fuse: 20 A RK5 (standard fault)))
FLA	2.4 A (500 V AC)
Group installation	20 A (class RK5, SCCR 5kA, #24 - 14 AWG max. solid and stranded)
	30 A (class CC or J, SCCR 100kA, #24 - 14 AWG max, solid and stranded)
Category code	NLDX

 

Standards and regulations của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

Standards/regulations
Standards/regulations	IEC 60947-1
	IEC 60947-4-2
	IEC 61508
	ISO 13849

 

Mounting của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

Mounting type	DIN rail mounting
Assembly note	alignable, for spacing see derating
Mounting position	vertical (horizontal DIN rail, motor output below)

 

Commercial data của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

Item number	2900414
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	DK7412
Catalog page	Page 28 (C-5-2019)
GTIN	4046356504058
Weight per piece (including packing)	323.1 g
Weight per piece (excluding packing)	269.6 g
Customs tariff number	85371098
Country of origin	DE

 

Classifications của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

ECLASS

ECLASS-12.0	27370905
ECLASS-13.0	27370905

ETIM

ETIM 9.0

EC001037

UNSPSC

UNSPSC 21.0

25173900

 

Approvals của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

IECEE CB Scheme

Approval ID: DE1-55728
 

EAC

Approval ID: RU*C-DE.*08.B.00520*
 

DNV GL

Approval ID: TAA00002HK
 

UL Listed

Approval ID: FILE E 323771
 

CCC

Approval ID: 2016010304871315
 

cUL Listed

Approval ID: FILE E 323771
 

cUL Listed

Approval ID: E228652
 

UL Listed

Approval ID: E228652
 

ATEX

Approval ID: PTB 07 ATEX 3145
 

Environmental product compliance của Khởi động động cơ Phoenix Contact ELR H5-IES-SC- 24DC/500AC-2 - 2900414

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	da3d2eb7-11ad-4a29-b238-1d9ed791a85f

---

 

Tham khảo thêm các model khác cùng loại với :

Bộ khởi động động cơ hybrid
Bộ khởi động động cơ lai (hybrid) của Phoenix Contact thay thế contactor đảo chiều thông thường và bảo vệ động cơ bằng một thiết bị duy nhất. Chuyển đổi động cơ một cách an toàn và đáng tin cậy bằng bộ khởi động động cơ lai. Sử dụng các thiết bị ở bất cứ nơi nào cần đảo chiều và bảo vệ động cơ không đồng bộ ba pha. Dòng sản phẩm bộ khởi động động cơ lai bao gồm bộ khởi động trực tiếp và đảo chiều, có nhiều chức năng khác nhau như dừng khẩn cấp.

ELR W3- 24DC/500AC- 2I - Hybrid motor starter
2297031
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and screw connection

ELR H5-IES-SC- 24DC/500AC-2 - Hybrid motor starter
2900414
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3 / PL e and screw connection

ELR H5-I-SC- 24DC/500AC-2 - Hybrid motor starter
2900574
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown, and screw connection.

ELR H3-I-SC- 24DC/500AC-2 - Hybrid motor starter
2900543
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown, and screw connection.

ELR W3- 24DC/500AC- 9I - Hybrid motor starter
2297057
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and screw connection.

ELR H3-IES-SC- 24DC/500AC-2 - Hybrid motor starter
2900567
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e and, screw connection.

ELR H5-IES-SC- 24DC/500AC-9 - Hybrid motor starter
2900421
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and screw connection.

ELR W3-230AC/500AC- 2I - Hybrid motor starter
2297044
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2 A output current, with 230 V AC control voltage, adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and screw connection

ELR H5-IES-PT- 24DC/500AC-9 - Hybrid motor starter
2903906
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e and push-in connection

ELR H5-I-PT- 24DC/500AC-2 - Hybrid motor starter
2903910
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown, and push-in connection.

ELR H5-IES-PT/500AC-3-IFS - Hybrid motor starter
2905139
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 3 A output current, with adjustable overload shutdown, emergency stop function to SIL 3 / PL e and push-in connection, DIN rail connector provided.

ELR W3-230AC/500AC- 9I - Hybrid motor starter
2297060
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 230 V AC control voltage, adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and screw connection

ELR H5-IES-PT- 24DC/500AC-2 - Hybrid motor starter
2903904
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e and push-in connection

EM-PSAFE-GATEWAY-IFS - Data interface
1188207
Gateway for the connection of up to 15 Interface system devices to a higher-level safe controller via PROFIsafe. The system devices are connected to the gateway via DIN rail connectors. The DIN rail connectors are provided.

ELR H3-IES-SC- 24DC/500AC-9 - Hybrid motor starter
2900569
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL3 /PL e, and screw connection.

ELR H5-ES-SC- 24DC/500AC-2 - Hybrid motor starter
2900559
Hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 2.4 A output current, and emergency stop function.

ELR H5-I-SC- 24DC/500AC-9 - Hybrid motor starter
2900576
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, and screw connection.

ELR H3-I-PT- 24DC/500AC-2 - Hybrid motor starter
2903922
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown, and push-in connection.

ELR H3-IES-PT- 24DC/500AC-2 - Hybrid motor starter
2903916
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and push-in connection.

ELR H5-IES-PT-24DC/500AC-2-T - Hybrid motor starter
2906059
Hybrid motor starter; functions: Start motor, Reverse motor, Motor protection, Emergency stop, Higher resistance to transient voltages, ATEX; input: 24 V DC; output: 3~, 500 V AC, 2.4 A; Push-in connection
ELR H3-I-SC- 24DC/500AC-9 - Hybrid motor starter
2900545
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, and screw connection.
ELR H5-SC- 24DC/500AC-9 - Hybrid motor starter
2900538
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, and screw connection.
EM-PNET-GATEWAY-IFS - Data interface
2904472
Gateway for the connection of up to 32 Interface system devices to a higher-level controller via PROFINET. The Interface system devices are connected to the gateway via DIN rail connectors. The DIN rail connectors are provided.
ELR H3-I-PT- 24DC/500AC-9 - Hybrid motor starter
2903924
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, and push-in connection.
ELR H3-IES-PT- 24DC/500AC-9 - Hybrid motor starter
2903918
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and push-in connection.
ELR H51-IESSC-24DC500AC-9 - Hybrid motor starter
2902745
Short-circuit-proof hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 9 A output current, emergency stop function, and adjustable overload shutdown. Can only be used with EM-RD adapter, EM-RI adapter or power distribution board.
ELR H5-I-PT- 24DC/500AC-9 - Hybrid motor starter
2903912
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, and push-in connection.
EM-MODBUS-GATEWAY-IFS - Data interface
2901528
Gateway for the connection of up to 32 Interface system devices to a higher-level controller via Modbus/TCP. The Interface system devices are connected to the gateway via DIN rail connectors. The DIN rail connectors are provided.
ELR H3-IES-PT/500AC-3-IOL - Hybrid motor starter
2908671
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC and 3 A output current, with adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and Push-in connection. Connection to IO-Link.
ELR H5-IES-PT-24DC/500AC-9-T - Hybrid motor starter
2906060
Hybrid motor starter; functions: Start motor, Reverse motor, Motor protection, Emergency stop, Higher resistance to transient voltages, ATEX; input: 24 V DC; output: 3~, 500 V AC, 9 A; Push-in connection
ELR H5-IES-PT/500AC-9-IFS - Hybrid motor starter
2905140
Networkable hybrid motor starter for reversing of 3~ AC motors up to 500 V AC and 9 A output current, with adjustable overload shutdown, emergency stop function to SIL 3 / PL e and push-in connection, DIN rail connector provided.
ELR H3-IES-SC- 24DC/500AC-0,6 - Hybrid motor starter
2900566
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL3 /PL e, and screw connection.
ELR H3-IES-SC-230AC/500AC-9 - Hybrid motor starter
2900570
Hybrid motor starter for starting 3~ AC motors up to 550 V AC, with 230 V AC input, 9 A output current, emergency stop function, and adjustable overload shutdown.
ELR H3-IS-PT- 24DC/500AC-3-P - Hybrid motor starter
2909570
Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 3 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.
ELR H3-IES-PT-24DC/500AC-9-T - Hybrid motor starter
2906064
Hybrid motor starter; functions: Start motor, Motor protection, Emergency stop, Higher resistance to transient voltages, ATEX; input: 24 V DC; output: 3~, 500 V AC, 9 A; Push-in connection
ELR H5-I-SC- 24DC/500AC-0,6 - Hybrid motor starter
2900573
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown, and screw connection.
ELR H5-IES-SC-230AC/500AC-9 - Hybrid motor starter
2900422
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 230 V AC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e
ELR H3-SC- 24DC/500AC-9 - Hybrid motor starter
2900530
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage and screw connection.
ELR H3-IES-PT-24DC/500AC-06-T - Hybrid motor starter
2906061
Hybrid motor starter; functions: Start motor, Motor protection: (class 10A), Emergency stop to SIL 3/PL e, Underload detection, Higher resistance to transient voltages, ATEX; input: 24 V DC; output: 3~, 500 V AC, 600 mA; Push-in connection
ELR H5-IES-PT/500AC-06-IFS - Hybrid motor starter
2905138
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 0.6 A output current, with adjustable overload shutdown, emergency stop function to SIL 3 / PL e and push-in connection, DIN rail connector provided.
ELR H51-IESSC-24DC500AC-2 - Hybrid motor starter
2902744
Short-circuit-proof hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 2.4 A output current, emergency stop function, and adjustable overload shutdown. Can only be used with EM-RD and EM-RI adapters or power distribution board.
ELR H5-ES-SC- 24DC/500AC-9 - Hybrid motor starter
2900561
Hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 9 A output current, and emergency stop function.
ELR H5-IES-PT-24DC/500AC-06-T - Hybrid motor starter
2906058
Hybrid motor starter; functions: Start motor, Reverse motor, Motor protection, Emergency stop, Higher resistance to transient voltages, ATEX; input: 24 V DC; output: 3~, 500 V AC, 600 mA; Push-in connection
EM-ETH-GATEWAY-IFS - Data interface
2901988
Gateway for the connection of up to 32 Interface system devices to a higher-level controller via EtherNet/IP™. The Interface system devices are connected to the gateway via DIN rail connectors. The DIN rail connectors are provided.
ELR H5-IES-PT/500AC-9-IOL - Hybrid motor starter
2908670
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and Push-in connection. Connection to IO-Link.
ELR H5-IES-SC-230AC/500AC-2 - Hybrid motor starter
2900420
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2.4 A output current, with 230 V AC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e
ELR H5-IS-PT- 24DC/500AC-9-P - Hybrid motor starter
2909567
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 9 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.
ELR H5-IES-PT- 24DC/500AC-3-P - Hybrid motor starter
2909556
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 3 A, provides motor protection, ATEX, and emergency stop up to SIL 3. Group shut-down, supply, and relay extension possible via DIN rail connector.
ELR H3-IES-PT/500AC-9-IOL - Hybrid motor starter
2908672
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and Push-in connection. Connection to IO-Link.
ELR H5-IES-PT/500AC-3-IOL - Hybrid motor starter
2908669
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 3 A output current, with adjustable overload shutdown, emergency stop function up to SIL 3/PL e, and Push-in connection. Connection to IO-Link.
ELR H5-I-PT- 24DC/500AC-0,6 - Hybrid motor starter
2903908
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown, and push-in connection.
ELR H5-IS-PT- 24DC/500AC-3-P - Hybrid motor starter
2909569
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 3 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.
ELR H3-I-PT- 24DC/500AC-0,6 - Hybrid motor starter
2903920
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown, and push-in connection.
EM-PB-GATEWAY-IFS - Data interface
2297620
Gateway for the connection of up to 32 Interface system devices to a higher-level controller via PROFIBUS DP. The Interface system devices are connected to the gateway via DIN rail connectors. The DIN rail connectors are provided.
ELR H5-IES-PT- 24DC/500AC-0,6 - Hybrid motor starter
2903902
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e and push-in connection
ELR H5-I-SC-24DC/500AC-2-L - Hybrid motor starter
2905513
Hybrid motor starter, for reversing 3~ AC motors up to 550 V AC/2.4 A, 24 V DC input, class 10 tripping characteristic, overload function, without symmetry monitoring, and without phase failure and underload detection. 1-phase motors can be switched.
ELR H5-IES-SC- 24DC/500AC-0,6 - Hybrid motor starter
2900582
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and screw connection.
ELR H3-IES-SC-230AC/500AC-2 - Hybrid motor starter
2900568
Hybrid motor starter for starting 3~  AC motors up to 550 V AC, with 230 V AC input, 2.4 A output current, emergency stop function, and adjustable overload shutdown.
ELR H3-IES-PT/500AC-3-IFS - Hybrid motor starter
2905142
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC, output current: 3 A, emergency stop function, adjustable overload shutdown, and Push-in connection, DIN rail connector provided.
ELR H3-IES-PT- 24DC/500AC-0,6 - Hybrid motor starter
2903914
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown, emergency stop function to SIL 3/PL e, and push-in connection.
ELR H3-I-SC- 24DC/500AC-0,6 - Hybrid motor starter
2900542
Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown, and screw connection.
ELR H51-IES-24DC500AC-9-IFS - Hybrid motor starter
1151587
Hybrid motor starter; functions: start motor, reverse motor, motor protection, emergency stop, network capable, short-circuit protection; input: 24 V DC; output: 3~, 500 V AC, 9 A; connection method: screw and Push-in connection; connection to the Interface system
ELR H3-I-PT- 24DC/500AC-9-P - Hybrid motor starter
2909561
Hybrid motor starter as an alternative to a conventional contactor circuit. Starts 3~ AC motors up to 9 A and offers motor protection. Possible supply and relay extension via DIN rail connector.
EM-CAN-GATEWAY-IFS - Data interface
2901504
Gateway for the connection of up to 32 Interface system devices to a higher-level controller via CANopen®. The Interface system devices are connected to the gateway via DIN rail connectors. The DIN rail connectors are provided.
ELR H3-IS-PT- 24DC/500AC-9-P - Hybrid motor starter
2909568
Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 9 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.
ELR H3-IES-PT- 24DC/500AC-9-P - Hybrid motor starter
2909555
Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 9 A, provides motor protection, ATEX, and emergency stop up to SIL 3. Group shut-down, supply, and relay extension possible via DIN rail connector.
ELR H51-IES-24DC500AC-9-IOL - Hybrid motor starter
1151610
Hybrid motor starter; functions: start motor, reverse motor, motor protection, emergency stop, network capable, short-circuit protection; input: 24 V DC; output: 3~, 500 V AC, 9 A; connection method: screw and Push-in connection; connection to the IO-Link system
ELR H3-IES-PT/500AC-9-IFS - Hybrid motor starter
2905143
Networkable hybrid motor starter for starting 3~ AC motors up to 500 V AC, output current: 9 A, emergency stop function, adjustable overload shutdown, and Push-in connection, DIN rail connector provided.
ELR H3-IES-PT- 24DC/500AC-3-P - Hybrid motor starter
2909557
Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 3 A, provides motor protection, ATEX, and emergency stop up to SIL 3. Group shut-down, supply, and relay extension possible via DIN rail connector.
ELR H5-I-PT-24DC/500AC-2-L - Hybrid motor starter
1199926
Hybrid motor starter, for reversing 3~ AC motors up to 550 V AC/2.4 A, 24 V DC input, class 10 tripping characteristic, overload function, without symmetry monitoring, and without phase failure and underload detection. 1-phase motors can be switched.
ELR H3-IES-PT-24DC/500AC-2-T - Hybrid motor starter
2906062
Hybrid motor starter; functions: Start motor, Motor protection, Emergency stop, Higher resistance to transient voltages, ATEX; input: 24 V DC; output: 3~, 500 V AC, 2.4 A; Push-in connection
ELR H5-IES-PT- 24DC/500AC-9-P - Hybrid motor starter
2909554
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 9 A, provides motor protection, ATEX, and emergency stop up to SIL 3. Group shut-down, supply, and relay extension possible via DIN rail connector.
ELR H51-IES-24DC500AC-3-IOL - Hybrid motor starter
1151617
Hybrid motor starter; functions: start motor, reverse motor, motor protection, emergency stop, network capable, short-circuit protection; input: 24 V DC; output: 3~, 500 V AC, 3 A; connection method: screw and Push-in connection; connection to the IO-Link system
ELR H3-I-PT- 24DC/500AC-3-P - Hybrid motor starter
2909563
Hybrid motor starter as an alternative to a conventional contactor circuit. Starts 3~ AC motors up to 3 A and offers motor protection. Possible supply and relay extension via DIN rail connector.
ELR H51-IES-24DC500AC-3-IFS - Hybrid motor starter
1151618
Hybrid motor starter; functions: start motor, reverse motor, motor protection, emergency stop, network capable, short-circuit protection; input: 24 V DC; output: 3~, 500 V AC, 3 A; connection method: screw and Push-in connection; connection to the Interface system
ELR H5-I-PT- 24DC/500AC-9-P02 - Hybrid motor starter
1160740
Modular hybrid motor starter for starting and reversing motors incl. motor protection and rotary field monitoring, input: 24 V DC, output: 3~, 500 V AC, 9 A, connection method: Push-in connection
ELR H5-I-PT- 24DC/500AC-9-P - Hybrid motor starter
2909560
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 9 A and offers motor protection. Possible supply and relay extension via DIN rail connector.
ELR H5-I-PT- 24DC/500AC-3-P - Hybrid motor starter
2909562
Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 3 A and offers motor protection. Possible supply and relay extension via DIN rail connector.
EM-2RPT/21AU-R/L-P - Extension module
2909573
Relay extension module for ELR-...-P hybrid motor starters, feedback of forward and reverse running when control signal is present, Push-in connection, DIN rail connector included
ELR H51-IESSC-24DC500AC-06 - Hybrid motor starter
2902746
Short-circuit-proof hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 0.6 A output current, emergency stop function, and adjustable overload shutdown. Can only be used with EM-RD and EM-RI adapters or power distribution board.