Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

86
Nhà sản xuất:

Phoenix Contact

;   

Xuất xứ: Germany

Giá sỉ:

Giá tốt nhất xem...0909186879 dienelectrics@gmail.com

Khuyến mãi:Có Discount
Bảo hành:12 Tháng (Chính hãng)
Thanh toán:C.O.D / Bảo lãnh TT / Link hoạt
Vận chuyển:Miễn phí Tp.HCM, vùng lân cận
Thông tin nổi bật

Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450 là Bộ khuếch đại chuyển mạch cách ly Ex i NAMUR, 2 đầu ra rơle (N/O), cách ly 3 chiều, SIL 2.

Bộ khuếch đại chuyển mạch cách ly Ex i NAMUR cho cảm biến tiệm cận và công tắc trong khu vực Ex. Các tín hiệu được truyền qua 2 đầu ra rơle (tiếp điểm N/O) đến khu vực an toàn. Phát hiện lỗi đường dây (LFD), cách ly 3 chiều, SIL 2.; CO CQ, BH 12 tháng, có CK CO CQ, BH 12 tháng, có CK CO CQ, BH 12 tháng, có CK
 

- Tài liệu kỹ thuật của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450 ở đây.

 

Product properties của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Product type Isolating switch amplifier
Product family MACX Analog
Application Digital IN
No. of channels 1
Type Ex i signal conditioners with SIL functional safety
Configuration DIP switches
 

System properties của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Functionality
Configuration DIP switches
 

Electrical properties của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Electrical isolation 3-way isolation
Electrical isolation between input and output yes
Electrical isolation Input/output IEC/EN 60079-11
Standards/regulations IEC/EN 60079-11
Rated insulation voltage 375 VPP
Overvoltage category III
Pollution degree 2
Electrical isolation Input/supply, DIN rail connector IEC/EN 60079-11
Standards/regulations IEC/EN 60079-11
Rated insulation voltage 375 VPP
Overvoltage category II
Pollution degree 2
Electrical isolation Input/supply, DIN rail connector IEC/EN 61010-1
Standards/regulations IEC/EN 61010-1
Rated insulation voltage 300 Vrms
Overvoltage category II
Pollution degree 2
Insulation Safe isolation
Electrical isolation Output 1/output 2/input, power supply, DIN rail connector IEC/EN 61010-1
Standards/regulations IEC/EN 61010-1
Rated insulation voltage 300 Vrms
Overvoltage category III
Pollution degree 2
Insulation Safe isolation
Electrical isolation Output 1/output 2/input/power supply, DIN rail connector
Test voltage 2.5 kV AC (50 Hz, 60 s)
Overvoltage category III
Pollution degree 2
Supply
Nominal supply voltage 24 V DC -20 % ... +25 %
Supply voltage range 19.2 V DC ... 30 V DC
Max. current consumption 30 mA (24 V DC)
Power dissipation < 1 W
Power consumption < 1 W
 

Input data của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Signal: NAMUR
Description of the input Intrinsically safe
Number of inputs 1
Available input sources NAMUR proximity sensors (IEC/EN 60947-5-6)
Floating switch contacts
Switch contacts with resistance circuit
Switching threshold "0" signal current < 1.2 mA (blocking)
Switching threshold "1" signal, current > 2.1 mA (conductive)
Short-circuit current 8 mA
Switching hysteresis < 0.2 mA
Line fault detection < 0.05 mA ... 0.35 mA (Line break)
< 100 Ω ... 360 Ω (Short circuit)
Activated /deactivated via DIP switch
Non-load voltage 8 V DC
 

Output data của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Switching: Relay
Contact switching type 2 N/O contacts
Contact material AgSnO2, hard gold-plated
Maximum switching voltage 250 V AC (2 A)
120 V DC (0.2 A)
30 V DC (2 A)
Maximum switching capacity 500 VA
Recommended minimum load 5 V / 10 mA
Switching frequency ≤ 20 Hz (without load)
Signal
Number of outputs 2
Bộ khuếch đại Phoenix Contact MACX MCR-EX-SL-NAM-2RO; Bộ khuếch đại Phoenix Contact 2865450; Isolation switch amplifier Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450
 

Connection data của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Connection method Screw connection
Stripping length 7 mm
Screw thread M3
Conductor cross section rigid 0.2 mm² ... 2.5 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 14
Tightening torque 0.5 Nm ... 0.6 Nm
Test socket
Max. diameter 2 mm
 

Ex data của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Ex installation (EPL) Gc
Div. 2
Ex i circuits (EPL) Ga
Da
Ma
Div. 1
Safety data
Max. internal inductance Li negligible
Max. internal capacitance Ci 11 nF
Max. output voltage Uo 9.6 V
Max. output current Io 10 mA
Max. output power Po 25 mW
Safety-related maximum voltage Um 253 V AC
125 V DC
IIA/I (simple circuit): Max. external inductivity Lo / Max. external capacitance Co 1000 mH / 210 µF
IIB/IIIC (simple circuit): Max. external inductivity Lo / Max. external capacitance Co 1000 mH / 26 µF
IIC (simple circuit): Max. external inductivity Lo / Max. external capacitance Co 300 mH / 3.6 µF
IIC (mixed circuit): Max. external inductivity Lo / Max. external capacitance Co 100 mH / 500 nF, 50 mH / 570 nF, 5 mH / 590 nF, 1 mH / 590 nF, 10 µH / 590 nF
I/IIB/IIA/IIIC (mixed circuit): Max. external inductivity Lo / Max. external capacitance Co 100 mH / 1 µF, 5 mH / 1 µF, 1 mH / 1 µF, 10 µH / 1 µF
 

Signaling của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Status display Green LED (supply voltage)
LED yellow (switching state)
Red LED (line errors)
Bộ khuếch đại Phoenix Contact MACX MCR-EX-SL-NAM-2RO; Bộ khuếch đại Phoenix Contact 2865450; Isolation switch amplifier Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450
 

Dimensions của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Dimensional drawing  
Width 12.5 mm
Height 112.5 mm
Depth 113.7 mm
Depth NS 35/7,5 114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)
 

Material specifications của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Color gray (RAL 7042)
Flammability rating according to UL 94 V0 (Housing)
Housing material PA 6.6-FR
 

Environmental and real-life conditions của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Ambient conditions
Degree of protection IP20 (not assessed by UL)
Ambient temperature (operation) -40 °C ... 60 °C (Any mounting position)
-40 °C ... 70 °C (Derating)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Altitude range (≤ 2000 m)
Altitude ≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient temperature (operation) -40 °C ... 60 °C
-40 °C ... 70 °C (Derating)
Rated insulation voltage 253 V AC (Power supply, input / output)
125 V DC (Power supply, input / output)
Altitude range (≤ 3000 m)
Height range > 2000 m ... 3000 m
Ambient temperature (operation) -40 °C ... 54 °C
-40 °C ... 63 °C (Derating)
Rated insulation voltage 190 V AC (Power supply, input / output)
110 V DC (Power supply, input / output)
Altitude range (≤ 4000 m)
Height range > 3000 m ... 4000 m
Ambient temperature (operation) -40 °C ... 48 °C
-40 °C ... 56 °C (Derating)
Rated insulation voltage 60 V AC/DC (Power supply, input / output)
Altitude range (≤ 5000 m)
Height range > 4000 m ... 5000 m
Ambient temperature (operation) -40 °C ... 42 °C
-40 °C ... 49 °C (Derating)
Rated insulation voltage 60 V AC/DC (Power supply, input / output)
 

Approvals của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

CE
Certificate CE-compliant
Note and EN 61326
ATEX
Identification  II (1) G [Ex ia Ga] IIC
 II (1) D [Ex ia Da] IIIC
 II 3 (1) G Ex ec [ia Ga] nC IIC T4 Gc
 I (M1) [Ex ia Ma] I
Certificate IBExU 07 ATEX 1069 X
IECEx
Identification [Ex ia Ga] IIC
[Ex ia Da] IIIC
Ex ec [ia Ga] nC IIC T4 Gc
[Ex ia Ma] I
Certificate IECEx IBE 08.0001X
CCC / China-Ex
Identification [Ex ia Ga] IIC
[Ex ia Da] IIIC
Ex ec nC [ia Ga] IIC T4 Gc
Certificate 2022122316115975
UL, USA/Canada
Identification UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Div. 2, Groups IIC, IIB, IIA T4
Associated apparatus for use in Class I, Division 1, Groups A,B,C,D
Associated apparatus for use in Class II, Div.1 Groups E,F,G
Associated apparatus for use in Class III, Division 1
Associated apparatus for use in Class I, Zone 0,1,2, Groups IIC,IIB,IIA
Certificate , C.D.-No 83104549
UL, USA/Canada
Identification Class I Div 2; IS for Class I, II, III Div 1
UL 61010 Listed
Certificate , C.D.-No 83104549
KC-s
Identification [Ex ia] IIC/IIB
Certificate 17-KA4BO-0409X
Shipbuilding approval
Certificate DNV GL TAA00000AG
Safety Integrity Level (SIL, IEC 61508)
Identification 2
Certificate IN-AT-AS-MRL-24-00163
Systematic Capability
Identification 3
INMETRO
Identification [Ex ia Ga] IIC
[Ex ia Da] IIIC
Ex ec nC [ia Ga] IIC T4 Gc
[Ex ia Ma] I
Certificate DNV 18.0114 X
Shipbuilding data
Temperature B
Humidity B
Vibration A
EMC B
Enclosure Required protection according to the Rules shall be provided upon installation on board
 

EMC data của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Electromagnetic compatibility Conformance with EMC directive
Noise immunity EN 61000-6-2
EN 61326
Noise emission
Standards/regulations EN 61000-6-4
 

Standards and regulations của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Electrical isolation 3-way isolation
GB Standard
Standards/regulations GB/T 3836.1
GB/T 3836.3
GB/T 3836.4
GB/T 3836.8
 

Mounting của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

Mounting type DIN rail mounting
 

Commercial data của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450 

Item number 2865450
Packing unit 1 pc
Minimum order quantity 1 pc
Sales key DK1213
Product key DK1213
Catalog page Page 155 (C-5-2019)
GTIN 4046356160476
Weight per piece (including packing) 183.1 g
Weight per piece (excluding packing) 140 g
Customs tariff number 85365019
Country of origin DE
 

Classifications của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

ECLASS

ECLASS-11.0 27210121
ECLASS-12.0 27210121
ECLASS-13.0 27210121
ECLASS-14.0 ASSET 27250101

ETIM

ETIM 9.0 EC001485

UNSPSC

UNSPSC 21.0 39121000
 

Approvals của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

UL Listed

Approval ID: E330267
 

cUL Listed

Approval ID: E330267

Functional Safety

Approval ID: 07-06-39 R005 V2R2

DNV

Approval ID: TAA00000AG
 

EAC Ex

Approval ID: TR TS_S_103.01.00078
 

IECEx

Approval ID: IECEx IBE 08.0001X
 

cUL Listed

Approval ID: E199827
 

UL Listed

Approval ID: E199827
 

ATEX

Approval ID: IBExU07ATEX1069

INMETRO

Approval ID: DNV 18.0114 X
 

KC-s

Approval ID: 17-KA4BO-0409X
 

CCC

Approval ID: 2022122316115975
 

Environmental product compliance của Bộ khuếch đại chuyển mạch cách ly Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

EU RoHS
Fulfills EU RoHS substance requirements Yes
Exemption 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP) EFUP-50
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.) Lead (CAS: 7439-92-1)
2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol (CAS: 79-94-7)
SCIP b7380afc-6794-4c77-8a04-f3e9464b8db7
Bộ khuếch đại Phoenix Contact MACX MCR-EX-SL-NAM-2RO; Bộ khuếch đại Phoenix Contact 2865450; Isolation switch amplifier Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450

 

Tham khảo thêm các model khác cùng loại với Bộ khuếch đại Phoenix Contact MACX MCR-EX-SL-NAM-2RO - 2865450:

MACX MCR-EX-SL-NAM-R-SP - Isolation switch amplifier
2924045
Ex i NAMUR isolation amplifier. For operating proximity sensors and switches in a potentially explosive area. The signals are transmitted by a relay output (changeover contact) to a safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
MACX MCR-EX-SL-RPSSI-I - Power/input isolating amplifier
2865340
Ex i repeater power supply and input signal conditioner, HART-transparent. Transmits supplied or active 0/4 … 20 mA signals from the Ex area to a load (active or passive) in the safe area. 3-way electrical isolation, SIL 2 in accordance with IEC 61508, with screw connection
MACX MCR-EX-SL-2NAM-RO - Isolation switch amplifier
2865476
Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
MACX MCR-EX-SL-2NAM-RO-SP - Isolation switch amplifier
2924087
Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
MACX MCR-EX-SL-RPSSI-I-SP - Power/input isolating amplifier
2924016
Ex i repeater power supply and input signal conditioner, HART-transparent. Transmits supplied or active 0/4 … 20 mA signals from the Ex area to a load (active or passive) in the safe area. 3-way electrical isolation, SIL 2 in accordance with IEC 61508, with Push-in connection
MACX MCR-EX-SL-2NAM-R-UP-SP - Isolation switch amplifier
2924249
2-channel Ex i NAMUR signal conditioner with wide range power supply for proximity sensors and switches. In terms of signal output, for each channel there is a relay with a changeover contact available. Fault detection (LFD), 3-way isolation, SIL 2.
MACX MCR-EX-RTD-I-SP - Temperature measuring transducer
1050252
Ex i temperature transducer: converts signals from resistance temperature detectors installed in the Ex area and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely programmable, 3-way isolation, SIL, Push-in connection, standard configuration.
MACX MCR-EX-IDS-I-I-SP - Output signal conditioner
2908062
Ex i output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA … 20 mA signals with intrinsic safety to a load in the Ex area. 3-way electrical isolation, line fault detection (can be switched off via DIP switch), SIL 2 (SC3) in accordance with IEC 61508, Push-in connection.
MACX MCR-EX-SL-RPSSI-I-UP - Power/input isolating amplifier
2865793
Ex i repeater power supply and input signal conditioner, HART-transparent. Transmits supplied or active 0/4 … 20 mA signals from the Ex area to a load (active or passive) in the safe area. SIL 2 (1oo1) / SIL 3 (1oo2), wide-range supply.
MACX MCR-EX-SL-2NAM-T-SP - Isolation switch amplifier
2924090
Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
MACX MCR-EX-TC-I - Temperature measuring transducer
1050233
Ex i temperature transducer: converts signals from thermocouples installed in Ex areas and mV sources and transmits a 0/4…20 mA signal to a load in the safe area. Freely programmable. 3-way isolation, screw connection, SIL.
MACX MCR-EX-RTD-I - Temperature measuring transducer
1050222
Ex i temperature transducer: converts signals from resistance temperature detectors installed in the Ex area and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely programmable. 3-way isolation, SIL, screw connection, standard configuration.
MACX MCR-EX-SL-NAM-2RO - Isolation switch amplifier
2865450
Ex i NAMUR isolating amplifier for operating proximity sensors and switches in the Ex area. The signals are transmitted via 2 relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
MACX MCR-EX-SL-SD-21-60-LP - Solenoid driver
2865515
Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 58 mA. For gases up to Group IIB, loop-powered, electrical isolation, SIL 3. Screw connection.
MACX MCR-EX-SL-RPSS-2I-2I - Repeater power supply
2865382
Ex i measuring transducer repeater power supply, 2-channel; HART-transparent. Supplies Ex i 2-conductor measuring transducers and transmits the 4…20 mA signal from the Ex area to the safe area. 5-way electrical isolation, screw connection, up to SIL 3, PL.
MACX MCR-EX-SL-2NAM-T - Isolation switch amplifier
2865489
Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
MACX MCR-EX-SL-RPSS-2I-2I-SP - Repeater power supply
2924676
Ex i measuring transducer repeater power supply, 2-channel, HART-transparent. Supplies Ex i 2-conductor measuring transducers and transmits the 4…20 mA signal from the Ex area to the safe area. 5-way electrical isolation, Push-in connection, up to SIL 3, PL.
2908060
Ex i output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA … 20 mA signals with intrinsic safety to a load in the Ex area. 3-way electrical isolation, line fault detection (can be switched off via DIP switch), SIL 2 (SC3) in accordance with IEC 61508, screw connection.
MACX MCR-EX-SL-SD-21-40-LP-SP - Solenoid driver
Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 40 mA. For gases up to Group IIC, loop-powered, electrical isolation, SIL 3. Push-in connection.
MACX MCR-EX-SL-SD-24-48-LP - Solenoid driver
2865609
MACX MCR-EX-T-UIREL-UP - Temperature measuring transducer
2865751
Programmable temperature transducer with analog output and 3 limit value relays, intrinsically safe signal input, resistance thermometer in 2-, 3-, or 4-conductor technology, thermocouples, electrical isolation, wide-range power supply, screw connection, SIL, PL.
MACX MCR-EX-IDS-2I-2I-SP - Output signal conditioner
2904931
2-channel Ex i output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA … 20 mA signals with intrinsic safety to a load in the Ex area. 4-way electrical isolation, line fault detection, SIL 2 (SC3) in accordance with IEC 61508, Push-in connection.
2924236
Ex i-Measuring transducer repeater power supply and input signal conditioner transmits supplied or active 0 mA/4 mA ... 20 mA electrically isolated signals from the Ex area to two loads in the safe area. number of channels: 1, HART-transparent, Standard configuration, 3-way isolation, Safety Integrity Level (SIL, IEC 61508): 2, Performance Level (ISO 13849): d / KAT 2, Systematic Capability: 3, Push-in connection
MACX MCR-EX-AP-RPSS-I-I-SP - Power/input isolating amplifier
Ex i-Feed and input signal conditioner feeds 2-, 3- and 4-conductor measuring transducer and transmits 1:1 passive or active 0 mA / 4 mA ... 20 mA Ex i input signals as active non Ex i output signal. number of channels: 1, HART-transparent, Standard configuration, 3-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
MACX MCR-EX-SL-RPSSI-2I - Repeater power supply
2865366
MINI MCR-EX-RPSS-I-I - Repeater power supply
2908803
Ex i-Repeater power supply and input signal conditioner transmits supplied or active 0 mA/4 mA ... 20 mA signals from the Ex area to a load in the safe area.. HART-transparent, no-load voltage: 15 V DC, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
2865434
Ex i NAMUR isolation amplifier. For operating proximity sensors and switches in a potentially explosive area. The signals are transmitted by a relay output (changeover contact) to a safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
MACX MCR-EX-SL-NAM-2T-SP - Isolation switch amplifier
2924074
Ex i NAMUR isolating amplifier for operating proximity sensors and switches in the Ex area. The signals are transmitted via 2 transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
MACX MCR-EX-SL-SD-21-25-LP-SP - Solenoid driver
Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 25 mA. For gases up to Group IIC, loop-powered, electrical isolation, SIL 3. Push-in connection.
MINI MCR-EX-NAM-RO - Isolation switch amplifier
1157862
MACX MCR-EX-SL-2NAM-R-UP - Isolation switch amplifier
2865984
2-channel Ex i NAMUR signal conditioner with wide range power supply for proximity sensors and switches. In terms of signal output, for each channel there is a relay with a changeover contact available. Fault detection (LFD), 3-way isolation, SIL 2.
2865764
Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 40 mA. For gases up to Group IIC, loop-powered, electrical isolation, SIL 3. Screw connection.
MACX MCR-EX-SL-NAM-2RO-SP - Isolation switch amplifier
Ex i NAMUR isolating amplifier for operating proximity sensors and switches in the Ex area. The signals are transmitted via 2 relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
MACX MCR-EX-SL-UI-REL-SP - Limit value switch
2906165
MINI MCR-EX-NAM-2T-PT - Isolation switch amplifier
1157854
Ex i-NAMUR signal conditioner for operating proximity sensors and switches in the Ex area. The signals are transmitted to the safe area via 2 transistor outputs (passive). Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
2908856
Ex i-Measuring transducer repeater power supply and input signal conditioner, only output 1 is HART-transparent. Transmits supplied or active electrically isolated signals from the Ex area to two loads. number of channels: 1, HART-transparent, Standard configuration, Safety Integrity Level (SIL, IEC 61508): 2, Performance Level (ISO 13849): d / KAT 2, Systematic Capability: 3, Push-in connection
MACX MCR-EX-SL-UI-REL - Limit value switch
Limit value switch with Ex i input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical isolation, up to SIL2 (SC3), PLc Cat.1, screw connection.
MINI MCR-EX-NAM-T-PT - Isolation switch amplifier
2908808
MINI MCR-EX-IDS-I-I-PT - Output signal conditioner
2908806
Ex i-Output signal conditioner for isolating and transmitting 0 mA / 4 mA ... 20 mA signals from the controller to an intrinsically safe load in the Ex area. HART-transparent, no-load voltage: 27 V DC, Standard configuration, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
2924799
Programmable temperature transducer with analog output and 3 limit value relays, intrinsically safe signal input, resistance thermometer in 2-, 3-, or 4-conductor technology, thermocouples, electrical isolation, wide-range power supply, Push-in connection, SIL, PL.
MACX MCR-EX-SL-NAM-2T - Isolation switch amplifier
Ex i NAMUR isolating amplifier for operating proximity sensors and switches in the Ex area. The signals are transmitted via 2 transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
MACX MCR-EX-SL-SD-21-25-LFD - Solenoid driver
2905669
MACX MCR-EX-T-UI-UP-SP - Temperature measuring transducer
2924689
Programmable Ex-i temperature transducer with analog output and 1 limit value relay, standard configuration, resistance thermometer in 2-, 3-, or 4-conductor technology, thermocouples, electrical isolation, wide-range power supply, Push-in connection, SIL, PL.
2865421
2-channel Ex i output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA … 20 mA signals with intrinsic safety to a load in the Ex area. 4-way electrical isolation, line fault detection, SIL 2 (SC3) in accordance with IEC 61508, screw connection.
MACX MCR-EX-SL-SD-24-48-LFD - Solenoid driver
Ex i solenoid driver for controlling Ex i solenoid valves in hazardous areas, logic input, off-load voltage 24.3 V, current limitation at 48 mA, line fault transparency, error message output, up to SIL 3 according to IEC 61508; screw connection.
MACX MCR-EX-SL-RPSSI-I-UP-SP - Power/input isolating amplifier
2924029
MACX MCR-EX-T-UI-UP - Temperature measuring transducer
2865654
Freely programmable Ex-i temperature transducer with analog output and 1 limit value relay, standard configuration, resistance thermometer in 2-, 3-, or 4-conductor technology, thermocouples, electrical isolation, wide-range power supply, screw connection, SIL, PL.
2924867
Ex i solenoid driver for controlling Ex i solenoid valves in hazardous areas, logic input, off-load voltage 22.6 V, current limitation at 48 mA, line fault transparency, error message output, up to SIL 3 in accordance with IEC 61508, screw connection
MINI MCR-EX-RPSS-I-I-PT - Repeater power supply
Ex i-Repeater power supply and input signal conditioner transmits supplied or active 0 mA/4 mA ... 20 mA signals from the Ex area to a load in the safe area.. HART-transparent, no-load voltage: 15 V DC, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
In approx. 8 working days available in United Kingdom
MACX MCR-EX-SL-SD-24-48-LP-SP - Solenoid driver
Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 48 mA. For gases up to Group IIC, loop-powered, electrical isolation, SIL 3. Push-in connection.
In approx. 6 working days available in United Kingdom
MACX MCR-EX-SL-SD-21-60-LP-SP - Solenoid driver
Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 58 mA. For gases up to Group IIB, loop-powered, electrical isolation, SIL 3. Push-in connection.
In approx. 6 working days available in United Kingdom
MINI MCR-EX-NAM-RO-PT - Isolation switch amplifier
Ex i-NAMUR signal conditioner for operating proximity sensors and switches. The signals are transmitted to the control level via 1 solid-state relay at the output (passive). number of channels: 1, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
In approx. 6 working days available in United Kingdom
MACX MCR-EX-SL-SD-21-25-LP - Solenoid driver
Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 25 mA. For gases up to Group IIC, loop-powered, electrical isolation, SIL 3. Screw connection.
In approx. 26 working days available in United Kingdom
MACX MCR-EX-AP-RTD-RTD-SP - Temperature measuring transducer
Ex i-Resistance isolator for intrinsically safe operation of Pt 100 resistance thermometers in 2, 3, or 4-conductor technology and resistance-type sensors. The values measured at the Ex i input are transmitted 1:1 to the non Ex i output. number of channels: 1, Standard configuration, 3-way isolation, Push-in connection
Please contact us for more information.
MACX MCR-EX-TC-I-C - Temperature measuring transducer
Ex i temperature transducer: converts signals from thermocouples installed in Ex areas and mV sources and transmits a 0/4…20 mA signal to a load in the safe area. Order configuration, freely programmable. 3-way isolation, SIL.
Made to order
Product cannot be cancelled or returned
2924809
Programmable temperature transducer with analog output and 3 limit value relays, intrinsically safe signal input, resistance thermometer in 2-, 3-, or 4-conductor technology, thermocouples, electrical isolation, wide-range power supply, Push-in connection, SIL, PL.
Made to order
MACX MCR-EX-SL-NAM-NAM - Isolation switch amplifier
2866006
Ex i NAMUR isolation amplifier for operating Ex i proximity sensors and switches in the Ex area. Passive transistor output (resistive in accordance with EN 60947-5-6), line fault transparency, up to SIL 2 in accordance with IEC 61508, screw connection
MINI MCR-EX-SD-20-25-LP-PT - Solenoid driver
1157868
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 20 V DC, current limitation: 25 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
MINI MCR-EX-SD-21-48-LP - Solenoid driver
2908810
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 21 V DC, current limitation: 48 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MINI MCR-EX-SD-16-50-LFD-PT - Solenoid driver
1175904
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 16 V DC, current limitation: 50 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
MINI MCR-EX-SD-20-25-LP - Solenoid driver
1157867
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 20 V DC, current limitation: 25 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MINI MCR-EX-SD-16-50-LP - Solenoid driver
1157869
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 16 V DC, current limitation: 50 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MACX MCR-EX-AP-2REL-2DI-LP - Relay module
1292331
Ex i-Relay module isolates binary Ex i and non Ex i signal and control circuits, and is used for intrinsically safe activation of Ex i field currents via one changeover contact relay per channel. number of channels: 2, Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 2, Screw connection
MACX MCR-EX-AP-2T-2I-SP - Temperature measuring transducer
1290849
Ex i-Temperature transducer, input signals from resistance thermometers in 2, 3, or 4-conductor technology, thermocouples, and mV sources are converted into active 0 mA / 4 mA ... 20  mA non Ex i signals. number of channels: 2, Standard configuration, 5-way isolation, Push-in connection
MACX MCR-EX-RTD-I-SP-C - Temperature measuring transducer
1052652
Ex i temperature transducer: converts signals from resistance temperature detectors installed in the Ex area and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely programmable, 3-way isolation, SIL, Push-in connection, order configuration.
MACX MCR-EX-AP-RPSS-I-IR-SP - Power/input isolating amplifier
1290776
Ex i-Feed and input signal conditioner with 2 limit value relays, feeds 2-, 3-, and 4-conductor measuring transducer, transmits 1:1 passive or active 0 mA/4 mA ... 20 mA input signals and has 2 configurable limit value outputs. number of channels: 1, HART-transparent, Standard configuration, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 2, Push-in connection
MACX MCR-EX-SL-RPSSI-2I-1S - Repeater power supply
2908855
Ex i-Measuring transducer repeater power supply and input signal conditioner, only output 1 is HART-transparent. Transmits supplied or active electrically isolated signals from the Ex area to two loads. number of channels: 1, HART-transparent, Standard configuration, Safety Integrity Level (SIL, IEC 61508): 2, Performance Level (ISO 13849): d / KAT 2, Systematic Capability: 3, Screw connection
MINI MCR-EX-SD-16-50-LFD - Solenoid driver
1175902
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 16 V DC, current limitation: 50 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MACX MCR-EX-AP-IDS-2I-2I-LP - Output signal conditioner
1291963
Ex i-Output isolator isolates and transmits 0 mA / 4 mA ... 20 mA signals with intrinsic safety in potentially explosive areas. Suitable for fire and gas detectors. number of channels: 2, HART-transparent, no-load voltage: 25 V, Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MINI MCR-EX-SD-16-50-LP-PT - Solenoid driver
1157870
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 16 V DC, current limitation: 50 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
MINI MCR-EX-SD-21-48-LP-PT - Solenoid driver
2908811
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 21 V DC, current limitation: 48 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
MINI MCR-EX-SD-23-38-LP-PT - Solenoid driver
1277114
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 23 V DC, current limitation: 38 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
MACX MCR-EX-T-UI-UP-SP-C - Temperature measuring transducer
2924692
Freely programmable Ex-i temperature transducer with analog output and 1 limit value relay, order configuration, resistance thermometer in 2-, 3-, or 4-conductor technology, thermocouples, electrical isolation, wide-range power supply, Push-in connection, SIL, PL.
MINI MCR-EX-IDS-I-I - Output signal conditioner
2908805
Ex i-Output signal conditioner for isolating and transmitting 0 mA / 4 mA ... 20 mA signals from the controller to an intrinsically safe load in the Ex area. HART-transparent, no-load voltage: 27 V DC, Standard configuration, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MINI MCR-EX-SD-21-48-LFD - Solenoid driver
1175877
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 21 V DC, current limitation: 48 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MINI MCR-EX-SD-20-25-LFD - Solenoid driver
1175891
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 20 V DC, current limitation: 25 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MINI MCR-EX-NAM-2T - Isolation switch amplifier
1157852
Ex i-NAMUR signal conditioner for operating proximity sensors and switches in the Ex area. The signals are transmitted to the safe area via 2 transistor outputs (passive). Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MACX MCR-EX-AP-RTD-RTD - Temperature measuring transducer
1291894
Ex i-Resistance isolator for intrinsically safe operation of Pt 100 resistance thermometers in 2, 3, or 4-conductor technology and resistance-type sensors. The values measured at the Ex i input are transmitted 1:1 to the non Ex i output. number of channels: 1, Standard configuration, 3-way isolation, Screw connection
MINI MCR-EX-SD-20-25-LFD-PT - Solenoid driver
1175897
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 20 V DC, current limitation: 25 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
MACX MCR-EX-AP-2SD-25-35-LP - Solenoid driver
1291176
Ex i-Solenoid driver for intrinsically safe activation of Ex i solenoid valves, alarm transmitters, or displays installed in potentially explosive areas. number of channels: 2, Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MACX MCR-EX-AP-2F-2I-SP - Frequency measuring transducer
1290533
Ex i-Frequency transducer, the frequencies measured at the Ex i inputs (0.001 Hz ... 20 kHz) are output as 0 mA / 4 mA ... 20 mA non Ex i signals. number of channels: 2, Standard configuration, 5-way isolation, Push-in connection
MACX MCR-EX-AP-2F-2I - Frequency measuring transducer
1290530
Ex i-Frequency transducer, the frequencies measured at the Ex i inputs (0.001 Hz ... 20 kHz) are output as 0 mA / 4 mA ... 20 mA non Ex i signals. number of channels: 2, Standard configuration, 5-way isolation, Screw connection
MINI MCR-EX-NAM-T - Isolation switch amplifier
2908807
Ex i-NAMUR signal conditioner for operating proximity sensors and switches. The signals are transmitted to the control level via 1 transistor output (passive). Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MACX MCR-EX-AP-2T-2I - Temperature measuring transducer
1290780
Ex i-Temperature transducer, input signals from resistance thermometers in 2, 3, or 4-conductor technology, thermocouples, and mV sources are converted into active 0 mA / 4 mA ... 20  mA non Ex i signals. number of channels: 2, Standard configuration, 5-way isolation, Screw connection
MINI MCR-EX-SD-23-38-LFD-PT - Solenoid driver
1277119
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 23 V DC, current limitation: 38 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
MACX MCR-EX-SL-SD-21-25-LFD-SP - Solenoid driver
2905674
Ex i solenoid driver for controlling Ex i solenoid valves in hazardous areas, logic input, off-load voltage 21.1 V, current limitation at 25.1 mA, line fault transparency, error message output, up to SIL 3 according to IEC 61508; Push-in connection.
MACX MCR-EX-AP-RPSS-I-I - Power/input isolating amplifier
1291191
Ex i-Feed and input signal conditioner feeds 2-, 3- and 4-conductor measuring transducer and transmits 1:1 passive or active 0 mA / 4 mA ... 20 mA Ex i input signals as active non Ex i output signal. number of channels: 1, HART-transparent, Standard configuration, 3-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MACX MCR-EX-AP-2REL-2DI-LP-SP - Relay module
1292332
Ex i-Relay module isolates binary Ex i and non Ex i signal and control circuits, and is used for intrinsically safe activation of Ex i field currents via one changeover contact relay per channel. number of channels: 2, Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 2, Push-in connection
MACX MCR-EX-AP-RPSS-I-IR - Power/input isolating amplifier
1290774
Ex i-Feed and input signal conditioner with 2 limit value relays, feeds 2-, 3-, and 4-conductor measuring transducer, transmits 1:1 passive or active 0 mA/4 mA ... 20 mA input signals and has 2 configurable limit value outputs. number of channels: 1, HART-transparent, Standard configuration, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 2, Screw connection
MINI MCR-EX-SD-23-38-LFD - Solenoid driver
1277116
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 23 V DC, current limitation: 38 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MINI MCR-EX-SD-23-38-LP - Solenoid driver
1277111
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 23 V DC, current limitation: 38 mA, Standard configuration, Loop-powered, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
MACX MCR-EX-SL-NAM-NAM-SP - Isolation switch amplifier
2924883
Ex i NAMUR isolation amplifier for operating Ex i proximity sensors and switches in the Ex area. Passive transistor output (resistive in accordance with EN 60947-5-6), line fault transparency, up to SIL 2 in accordance with IEC 61508, Push-in connection
MINI MCR-EX-SD-21-48-LFD-PT - Solenoid driver
1175884
Ex i-Solenoid driver for controlling Ex i solenoid valves in the Ex area. no-load voltage: 21 V DC, current limitation: 48 mA, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
MACX MCR-EX-SL-SD-23-48-LFD-SP - Solenoid driver
2924870
Ex i solenoid driver for controlling Ex i solenoid valves in hazardous areas, logic input, off-load voltage 22.6 V, current limitation at 48 mA, line fault transparency, error message output, up to SIL 3 in accordance with IEC 61508, Push-in connection
MACX MCR-EX-SL-SD-24-48-LFD-SP - Solenoid driver
2906156
Ex i solenoid driver for controlling Ex i solenoid valves in hazardous areas, logic input, off-load voltage 24.3 V, current limitation at 48 mA, line fault transparency, error message output, up to SIL 3 according to IEC 61508, Push-in connection.
MACX MCR-EX-AP-2SD-25-35-LP-SP - Solenoid driver
1291186
Ex i-Solenoid driver for intrinsically safe activation of Ex i solenoid valves, alarm transmitters, or displays installed in potentially explosive areas. number of channels: 2, Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
MACX MCR-EX-AP-IDS-2I-2I-LP-SP - Output signal conditioner
1291983
Ex i-Output isolator isolates and transmits 0 mA / 4 mA ... 20 mA signals with intrinsic safety in potentially explosive areas. Suitable for fire and gas detectors. number of channels: 2, HART-transparent, no-load voltage: 25 V, Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection
SẢN PHẨM XEM NHIỀU
Gọi điện thoại