Bộ lưu điện UPS DC 24V 2A Phoenix Contact MINI-DC-UPS/24DC/2 - 2866640
Uninterruptible power supply with integrated power supply unit, 2 A, in combination with MINI-BAT/24/DC 0.8 AH or 1.3 AH
Product description
The MINI UPS modules with integrated power supply are particularly space-saving: UPS module and power supply in one housing. Only one energy storage is required to complete the UPS system.
Energy storage with lead AGM technology enables buffer times of up to 2 hours under nominal load for output voltages of 24 V DC or 12 V DC.
Technical data
Input data
DC operation |
Input voltage |
24 V DC |
Input voltage range |
100 V DC ... 350 V DC |
Voltage type of supply voltage |
DC |
Inrush current |
< 34 A (< 1.1 A2s) |
Inrush current integral (I2t) |
< 1.1 A2s |
Mains buffering time |
see diagram |
Buffer period |
20 min. (2 A) |
Rotary selector switch |
Can be set to: 0.5 min; 1 min; 2 min; 3 min; 5 min; 10 min; 15 min; 20 min; 30 min; permanent |
Current consumption |
0.6 A |
0.85 A (230 V AC) |
1.1 A |
1.5 A (120 V AC) |
Protective circuit |
Varistor |
Power factor (cos phi) |
approx. 0.5 |
Typical response time |
100 ms |
Input fuse |
3.15 A (slow-blow, internal) |
Permissible backup fuse |
B6 B10 B16 |
Recommended breaker for input protection |
6 A ... 16 A (Characteristics B, C, D, K) |
AC operation |
Nominal input voltage range |
100 V AC ... 240 V AC |
Input voltage range |
85 V AC ... 264 V AC |
Voltage type of supply voltage |
AC |
Output data
Efficiency |
> 83 % |
Nominal output voltage |
24 V DC (AC input voltage available: 22.5 to 29.5 V DC, AC input voltage not available: 27.9 to 19.2 V DC) |
Setting range of the output voltage (USet) |
22.5 V DC ... 29.5 V DC (normal mode; in the buffer mode, dependent on a battery voltage of 27.9 V DC ... 19.2 V DC) |
Nominal output current (IN) |
2 A |
Output current limit |
max. 3 A |
Bridging time |
1200 s |
Derating |
60 °C ... 70 °C (2.5%/K) |
Feedback voltage resistance |
35 V DC |
Protection against overvoltage at the output (OVP) |
< 35 V DC |
Max. capacitive load |
unlimited |
Control deviation |
< 1 % (change in load, static 10 % ... 90 %) |
Residual ripple |
< 50 mVPP |
Output power |
48 W |
Peak switching voltages nominal load |
< 100 mVPP |
Maximum no-load power dissipation |
3.8 W |
Power loss nominal load max. |
15 W |
Power dissipation |
3.8 W |
10.1 W |
2.1 W |
Rise time |
< 100 ms |
Connection in parallel |
yes |
Connection in series |
No |
Mains operation |
Nominal output voltage |
24 V DC |
Output voltage range |
22.5 V DC ... 29.5 V DC |
Nominal output current (IN) |
2 A |
Battery operation |
Nominal output voltage |
24 V DC |
Output voltage range |
19.2 V DC ... 27.6 V DC (UOUT = UBAT - 0,5 V DC) |
Nominal output current (IN) |
2 A |
Signal: Active (high = buffer module is loaded) |
Output description |
Power Good |
Maximum switching voltage |
≤ 24 V |
Output voltage |
+ 24 V |
Continuous load current |
≤ 20 mA |
Signal: Alarm |
Output description |
Relay output |
Maximum switching voltage |
≤ 24 V |
Output voltage |
24 V |
Continuous load current |
≤ 200 mA |
Signal: Battery charge |
Output description |
Relay output |
Maximum switching voltage |
≤ 24 V |
Output voltage |
24 V |
Continuous load current |
≤ 200 mA |
Signal: Battery mode |
Output description |
Relay output |
Maximum switching voltage |
≤ 24 V |
Output voltage |
24 V |
Continuous load current |
≤ 200 mA |
Energy storage
Charging current |
1 A |
Nominal capacity range |
0.8 Ah ... 1.3 Ah |
Memory medium |
external, battery 0.8 Ah / 1.3 Ah |
IQ technology |
no |
Network management |
No |
Connection data
Input |
Connection method |
Pluggable COMBICON screw connections |
Conductor cross section, rigid min. |
0.2 mm² |
Conductor cross section, rigid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
24 |
Conductor cross section AWG max. |
12 |
Stripping length |
8 mm |
Screw thread |
M3 |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Output |
Connection method |
Pluggable COMBICON screw connections |
Conductor cross section, rigid min. |
0.2 mm² |
Conductor cross section, rigid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
24 |
Conductor cross section AWG max. |
12 |
Stripping length |
8 mm |
Screw thread |
M3 |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Signal |
Conductor cross section, rigid min. |
0.2 mm² |
Conductor cross section, rigid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
24 |
Conductor cross section AWG max. |
12 |
Screw thread |
M3 |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Signaling
Types of signaling |
LED |
Signal output: Active (high = buffer module is loaded) |
Status display |
LED "Power Good", green |
Note on status display |
Buffer module is loaded: LED ON |
Signal output: Alarm |
Status display |
LED red |
Note on status display |
Malfunction/alarm: LED permanently lit |
Signal output: Battery charge |
Status display |
LED flashing yellow |
Note on status display |
Battery charge/battery is being charged: LED flashing |
Signal output: Battery mode |
Status display |
Yellow LED |
Note on status display |
Battery mode/buffer mode: LED permanently lit |
Electrical properties
Insulation voltage input/output |
4 kV (type test) |
2 kV (routine test) |
Product properties
Product type |
DC UPS with integrated power supply |
Product family |
MINI UPS – UPS with integrated power supply |
IQ technology |
no |
MTBF (IEC 61709, SN 29500) |
> 753000 h (40 °C) |
Insulation characteristics |
Protection class |
II (in closed control cabinet) |
Degree of pollution |
2 |
Dimensions
Width |
67.5 mm |
Height |
99 mm |
Depth |
107 mm |
Installation dimensions |
Installation distance right/left |
0 mm / 0 mm |
Installation distance top/bottom |
30 mm / 30 mm |
Mounting
Mounting type |
DIN rail mounting |
Assembly instructions |
alignable: horizontally 0 mm, vertically 50 mm |
Mounting position |
horizontal DIN rail NS 35, EN 60715 |
Material specifications
Housing material |
Plastic |
Type of housing |
Polyamide PA, color: green |
Environmental and real-life conditions
Ambient conditions |
Degree of protection |
IP20 |
Ambient temperature (operation) |
-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) |
Ambient temperature (storage/transport) |
-40 °C ... 85 °C |
Climatic class |
3K3 (in acc. with EN 60721) |
Max. permissible relative humidity (operation) |
95 % (at 25 °C, non-condensing) |
Shock |
18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) |
< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
15 Hz ... 150 Hz, 2.3g, 90 min. |
Standards and regulations
Rail applications |
EN 50121-4 |
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations |
EN 50178/VDE 0160 (PELV) |
Standard - Electrical safety |
EN 60950-1/VDE 0805 (SELV) |
EN 61558-2-17 |
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment |
EN 50178 |
Standard – Safety extra-low voltage |
EN 60950-1 (SELV) |
EN 60204 (PELV) |
Standard - Safe isolation |
DIN VDE 0100-410 |
Approvals
UL approvals |
UL Listed UL 508 |
UL/C-UL Recognized UL 60950-1 |
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
EMC data
Low Voltage Directive |
Conformance with Low Voltage Directive 2014/35/EC |
EMC requirements for noise emission |
EN 61000-6-3 |
EN 61000-6-4 |
EMC requirements for noise immunity |
EN 61000-6-1 |
EN 61000-6-2 |
Electromagnetic compatibility |
Conformance with EMC Directive 2014/30/EU |
Noise emission |
EN 55011 (EN 55022) |
Electrostatic discharge |
Standards/regulations |
EN 61000-4-2 |
Housing |
Level 3 |
Electrostatic discharge |
Contact discharge |
6 kV |
Discharge in air |
8 kV |
Comments |
Criterion B |
Electromagnetic HF field |
Standards/regulations |
EN 61000-4-3 |
Electromagnetic HF field |
Frequency range |
80 MHz ... 2 GHz |
Test field strength |
10 V/m |
Comments |
Criterion A |
Fast transients (burst) |
Standards/regulations |
EN 61000-4-4 |
Fast transients (burst) |
Input |
4 kV (level 4 - asymmetrical: conductor to ground) |
Output |
2 kV (level 3 - asymmetrical: conductor to ground) |
Signal |
1 kV (level 2 - asymmetrical: conductor to ground) |
Comments |
Criterion B |
Surge voltage load (surge) |
Standards/regulations |
EN 61000-4-5 |
Conducted interference |
Standards/regulations |
EN 61000-4-6 |
Conducted interference |
I/O/S |
Level 3 |
Frequency range |
10 kHz ... 80 MHz |
Comments |
Criterion A |
Voltage |
10 V |
Voltage dips |
Standards/regulations |
EN 61000-4-11 |
Emitted interference |
Standards/regulations |
EN 61000-6-3 |
Radio interference voltage in acc. with EN 55011 |
EN 55011 (EN 55022) Class B, area of application: Industry and residential |
Emitted radio interference in acc. with EN 55011 |
EN 55011 (EN 55022) Class B, area of application: Industry and residential |
Commercial data
Item number |
2866640 |
Packing unit |
1 pc |
Minimum order quantity |
1 pc |
Product key |
CMUM13 |
Catalog page |
Page 350 (C-4-2019) |
GTIN |
4046356113533 |
Weight per piece (including packing) |
496 g |
Weight per piece (excluding packing) |
447 g |
Customs tariff number |
85371091 |
Country of origin |
CN |
Classifications
ECLASS
ECLASS-11.0 |
27040705 |
ECLASS-12.0 |
27040705 |
ECLASS-13.0 |
27040705 |
ETIM
UNSPSC
Approvals
cUL Recognized
Approval ID: FILE E 211944
UL Recognized
Approval ID: FILE E 211944
EAC
Approval ID: EAC-Zulassung
EAC
Approval ID: EAC-Zulassung
UL Listed
Approval ID: FILE E 123528
EAC
Approval ID: RU S-DE.BL08.W.00764
UL Recognized
Approval ID: FILE E 211944
cUL Recognized
Approval ID: FILE E 211944
UL Listed
Approval ID: FILE E 123528
EAC
Approval ID: RU S-DE.BL08.W.00764
EAC
Approval ID: RU-DE.B.00184/20
EAC
Approval ID: RU-DE.B.00184/20
KC
Approval ID: R-R-PCK-2866640
cUL Listed
Approval ID: FILE E 199827
UL Listed
Approval ID: FILE E 199827
UL Listed
Approval ID: FILE E 199827
cUL Listed
Approval ID: FILE E 199827
Environmental product compliance
|
REACh SVHC |
Lead 7439-92-1 |
|
China RoHS |
Environmentally Friendly Use Period = 25; |
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” |
- Tài liệu kỹ thuật Phoenix Contact MINI-DC-UPS/24DC/2 - 2866640
ở đây.
Compatible products
Energy storage
MINI-BAT/24DC/0.8AH - 2866666
Energy storage
MINI-BAT/24DC/1.3AH - 2866417