Bộ nguồn 1AC 24DC 2.5A SC Phoenix Contact QUINT4-PS/1AC/24DC/2.5/SC - 2904598
Primary-switched power supply unit QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 2.5 A.
Alternative item: 2909576
Product description
In the power range of up to 100 W, QUINT POWER provides superior system availability in the smallest size. Preventative function monitoring and exceptional power reserves are available for applications in the low-power range.
Input data
AC operation |
Input voltage range |
100 V AC ... 240 V AC -15 % ... +10 % |
Electric strength, max. |
300 V AC 30 s |
Typical national grid voltage |
120 V AC |
230 V AC |
Voltage type of supply voltage |
AC/DC |
Inrush current |
typ. 10 A (at 25 °C) |
Inrush current integral (I2t) |
< 0.1 A2s |
Inrush current limitation |
4.3 A (after 1 ms) |
< 10 A |
Frequency range (fN) |
50 Hz ... 60 Hz -10 % ... +10 % |
Mains buffering time |
typ. 54 ms (120 V AC) |
typ. 54 ms (230 V AC) |
Current consumption |
0.85 A (100 V AC) |
0.7 A (120 V AC) |
0.39 A (230 V AC) |
0.37 A (240 V AC) |
Nominal power consumption |
71 VA |
Protective circuit |
Transient surge protection; Varistor |
Typical response time |
500 ms |
Input fuse |
3.15 A (slow-blow, internal) |
Recommended breaker for input protection |
6 A ... 16 A (Characteristic B, C or comparable) |
Discharge current to PE |
< 0.25 mA (264 V AC, 60 Hz) |
0.22 mA (264 V AC, 60 Hz) |
DC operation |
Input voltage range |
110 V DC ... 250 V DC -20 % ... +40 % |
Voltage type of supply voltage |
AC/DC |
Current consumption |
0.75 A (110 V DC) |
0.33 A (250 V DC) |
Output data
Efficiency |
typ. 91.9 % (120 V AC) |
typ. 92.6 % (230 V AC) |
Output characteristic |
U/I Advanced |
Nominal output voltage |
24 V DC |
Setting range of the output voltage (USet) |
24 V DC ... 28 V DC (constant capacity) |
Nominal output current (IN) |
2.5 A |
Static Boost (IStat.Boost) |
3.125 A (≤ 40 °C) |
Dynamic Boost (IDyn.Boost) |
5 A (≤60 °C (5 s), Input <150 V AC Derating 0.5 %/V) |
Derating |
> 60 °C (2.5 %/K) |
Feedback voltage resistance |
≤ 35 V DC |
Protection against overvoltage at the output (OVP) |
≤ 32 V DC |
Control deviation |
< 0.5 % (Static load change 10 % ... 90 %) |
< 2 % (Dynamic load change 10 % ... 90 %, (10 Hz)) |
< 0.1 % (change in input voltage ±10 %) |
Residual ripple |
< 40 mVPP (with nominal values) |
Short-circuit-proof |
yes |
No-load proof |
yes |
Output power |
60 W |
75 W |
120 W |
Maximum no-load power dissipation |
< 1 W (230 V AC) |
< 1 W (120 V AC) |
Power loss nominal load max. |
< 5 W (230 V AC) |
< 5 W (120 V AC) |
Crest factor |
typ. 1.69 (120 V AC) |
typ. 1,82 (230 V AC) |
Rise time |
50 ms (UOut = 10 % ... 90 %) |
Connection in parallel |
yes, for redundancy and increased capacity |
Connection in series |
yes |
Signal (configurable) |
Digital |
0 V DC 24 V DC 30 mA |
Default |
24 V DC 30 mA 24 V DC for UOut > 0.9 x USet |
Connection data
Input |
Connection method |
Screw connection |
Conductor cross section, rigid min. |
0.14 mm² |
Conductor cross section, rigid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.14 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Single conductor/terminal point, stranded, with ferrule, min. |
0.25 mm² |
Single conductor/terminal point, stranded, with ferrule, max. |
2.5 mm² |
Conductor cross section AWG min. |
26 |
Conductor cross section AWG max. |
14 |
Stripping length |
8 mm |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Output |
Connection method |
Screw connection |
Conductor cross section, rigid min. |
0.14 mm² |
Conductor cross section, rigid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.14 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Single conductor/terminal point, stranded, with ferrule, min. |
0.25 mm² |
Single conductor/terminal point, stranded, with ferrule, max. |
2.5 mm² |
Conductor cross section AWG min. |
26 |
Conductor cross section AWG max. |
14 |
Stripping length |
8 mm |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Signal |
Connection method |
Screw connection |
Conductor cross section, rigid min. |
0.14 mm² |
Conductor cross section, rigid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.14 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Single conductor/terminal point, stranded, with ferrule, min. |
0.25 mm² |
Single conductor/terminal point, stranded, with ferrule, max. |
2.5 mm² |
Conductor cross section AWG min. |
26 |
Conductor cross section AWG max. |
14 |
Stripping length |
8 mm |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Signaling
Types of signaling |
LED |
Signal output |
POut |
> PThr (LED lights up yellow, output power > PThr, depending on the rotary selector switch setting) |
UOut |
> 0.9 x USet (LED lights up green) |
< 0.9 x USet (LED flashes green) |
Electrical properties
Number of phases |
1.00 |
Insulation voltage input/output |
4 kV AC (type test) |
3 kV AC (routine test) |
Switching frequency |
4.00 kHz ... 70.00 kHz (Auxiliary converter stage) |
30.00 kHz ... 150.00 kHz (PFC stage) |
70.00 kHz ... 150.00 kHz (Main converter stage) |
Product properties
Product type |
Power supply |
Product family |
QUINT POWER |
MTBF (IEC 61709, SN 29500) |
> 1347000 h (25 °C) |
> 734000 h (40 °C) |
> 295000 h (60 °C) |
Environmental protection directive |
RoHS Directive 2011/65/EU |
WEEE |
Reach |
Insulation characteristics |
Protection class |
II |
Degree of pollution |
2 |
Life expectancy (electrolytic capacitors) |
Current |
2.5 A |
Temperature |
40 °C |
Time |
148000 h |
Additional text |
120 V AC |
Life expectancy (electrolytic capacitors) |
Current |
2.5 A |
Temperature |
40 °C |
Time |
153000 h |
Additional text |
230 V AC |
Life expectancy (electrolytic capacitors) |
Current |
2.5 A |
Temperature |
25 °C |
Time |
419000 h |
Additional text |
120 V AC |
Life expectancy (electrolytic capacitors) |
Current |
2.5 A |
Temperature |
25 °C |
Time |
432000 h |
Additional text |
230 V AC |
Dimensions
Dimensional drawing |
|
Width |
32 mm |
Height |
99 mm |
Depth |
90 mm |
Installation dimensions |
Installation distance right/left (active) |
15 mm / 15 mm (POut ≥50% ) |
Installation distance right/left (passive) |
5 mm / 5 mm (POut ≥50% ) |
Installation distance top/bottom (active) |
30 mm / 30 mm (POut ≥50% ) |
Installation distance top/bottom (passive) |
30 mm / 30 mm (POut ≥50% ) |
Installation distance top/bottom (active, passive) |
30 mm / 30 mm (POut ≤50 %) |
Mounting
Mounting type |
DIN rail mounting |
Assembly instructions |
DIN rail mounting |
With protective coating |
No |
Material specifications
Flammability rating according to UL 94 (housing / terminal blocks) |
V0 |
Housing material |
Plastic |
Type of housing |
Polycarbonate |
Hood version |
Polycarbonate |
Environmental and real-life conditions
Ambient conditions |
Degree of protection |
IP20 |
Ambient temperature (operation) |
-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) |
Ambient temperature (storage/transport) |
-40 °C ... 85 °C |
Ambient temperature (start-up type tested) |
-40 °C |
Maximum altitude |
≤ 5000 m (> 2000 m, observe derating) |
Climatic class |
3K3 (in acc. with EN 60721) |
Max. permissible relative humidity (operation) |
≤ 95 % (at 25 °C, non-condensing) |
Shock |
18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) |
< 15 Hz, ±2.5 mm amplitude; 15 Hz ... 100 Hz: 2.3 g 90 Min. (in accordance with IEC 60068-2-6) |
Standards and regulations
Standard – Limitation of mains harmonic currents |
EN 61000-3-2 |
Standard - Electrical safety |
IEC 61010-2-201 (SELV) |
Standard – Safety extra-low voltage |
IEC 61010-1 (SELV) |
IEC 61010-2-201 (PELV) |
Standard - Safe isolation |
IEC 61558-2-16 |
IEC 61010-2-201 |
Standard - safety for equipment for measurement, control, and laboratory use |
IEC 61010-1 |
Standard - Safety of transformers |
EN 61558-2-16 |
Standard - power supply devices for low voltage with DC output |
EN 61204-3 |
Overvoltage category |
EN 61010-1 |
II (≤ 5000 m) |
EN 62477-1 |
III (≤ 2000 m) |
Approvals
SIQ |
CB-Scheme (IEC 61010-1, IEC 61010-2-201) |
UL approvals |
UL Listed UL 61010-1 |
UL Listed UL 61010-2-201 |
UL 1310 Class 2 Power Units |
ANSI/UL 121201 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
EMC data
EMC requirements for noise emission |
EN 61000-6-3 |
EN 61000-6-4 |
EMC requirements for noise immunity |
EN 61000-6-1 |
EN 61000-6-2 |
Electromagnetic compatibility |
Conformance with EMC Directive 2014/30/EU |
EMC requirements, power plant |
IEC 61850-3 |
EN 61000-6-5 |
Conducted noise emission |
EN 55016 |
EN 61000-6-3 (Class B) |
Noise emission |
Additional basic standard EN 61000-6-5 (immunity in power station), IEC/EN 61850-3 (energy supply) |
Noise emission |
EN 55016 |
EN 61000-6-3 (Class B) |
Harmonic currents |
Frequency range |
0 kHz ... 2 kHz |
Flicker |
Frequency range |
0 kHz ... 2 kHz |
Electrostatic discharge |
Standards/regulations |
EN 61000-4-2 |
Electrostatic discharge |
Contact discharge |
8 kV (Test Level 4) |
Discharge in air |
8 kV (Test Level 3) |
Comments |
Criterion A |
Electromagnetic HF field |
Standards/regulations |
EN 61000-4-3 |
Electromagnetic HF field |
Frequency range |
80 MHz ... 1 GHz |
Test field strength |
20 V/m |
Frequency range |
1 GHz ... 6 GHz |
Test field strength |
10 V/m (Test Level 3) |
Comments |
Criterion A |
Fast transients (burst) |
Standards/regulations |
EN 61000-4-4 |
Fast transients (burst) |
Input |
4 kV (Test Level 4 - asymmetrical) |
Output |
4 kV (Test Level 4 - asymmetrical) |
Signal |
4 kV (Test Level 4 - asymmetrical) |
Comments |
Criterion B |
Surge voltage load (surge) |
Standards/regulations |
EN 61000-4-5 |
Surge voltage load (surge) |
Input |
1 kV (Test Level 3 - symmetrical) |
2 kV (Test Level 3 - asymmetrical) |
Output |
0.5 kV (Test Level 2 - symmetrical) |
0.5 kV (Test Level 1 - asymmetrical) |
Signal |
0.5 kV (Test Level 2 - symmetrical) |
0.5 kV (Test Level 1 - asymmetrical) |
Comments |
Criterion B |
Conducted interference |
Standards/regulations |
EN 61000-4-6 |
Conducted interference |
I/O/S |
asymmetrical |
Frequency range |
0.15 MHz ... 80 MHz |
Comments |
Criterion A |
Voltage |
10 V (Test Level 3) |
Power frequency magnetic field |
Standards/regulations |
EN 61000-4-8 |
Frequency |
16.67 Hz |
50 Hz |
60 Hz |
Test field strength |
100 A/m |
Additional text |
60 s |
Comments |
Criterion A |
Frequency |
50 Hz |
60 Hz |
Frequency range |
50 Hz ... 60 Hz |
Test field strength |
1 kA/m |
Additional text |
3 s |
Frequency |
0 Hz |
Test field strength |
300 A/m |
Additional text |
DC, 60 s |
Voltage dips |
Standards/regulations |
EN 61000-4-11 |
Voltage |
100 V AC |
Frequency |
60 Hz |
Voltage dip |
70 % |
Number of periods |
0.5 / 1 / 25 periods |
Additional text |
Test Level 2 |
Comments |
Criterion B |
Voltage dip |
40 % |
Number of periods |
5 / 10 / 50 periods |
Additional text |
Test Level 2 |
Comments |
Criterion B |
Voltage dip |
0 % |
Number of periods |
0.5 / 1 / 5 / 50 periods |
Additional text |
Test Level 2 |
Comments |
Criterion B |
Pulse-shape magnetic field |
Standards/regulations |
EN 61000-4-9 |
Test field strength |
1000 A/m |
Comments |
Criterion A |
Attenuated sinusoidal oscillations (ring wave) |
Standards/regulations |
EN 61000-4-12 |
Input |
2 kV (symmetrical) |
4 kV (asymmetrical) |
Comments |
Criterion B |
Asymmetrical conducted disturbance variables |
Standards/regulations |
EN 61000-4-16 |
Test level 1 |
16.67 Hz 50 Hz 60 Hz (Test Level 3) |
Voltage |
30 V (Permanent) |
Test level 2 |
16.67 Hz 50 Hz 60 Hz (Test Level 4) |
Voltage |
300 V (1 s) |
Comments |
Criterion A |
Attenuated oscillating wave |
Standards/regulations |
EN 61000-4-18 |
Input/Output/Signal |
1 kV (symmetrical) |
2.5 kV (asymmetrical) |
Comments |
Criterion B |
Criteria |
Criterion A |
Normal operating behavior within the specified limits. |
Criterion B |
Temporary impairment to operational behavior that is corrected by the device itself. |
Criterion C |
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements. |
Commercial data
Item number |
2904598 |
Packing unit |
1 pc |
Minimum order quantity |
1 pc |
Product key |
CMPI13 |
Catalog page |
Page 251 (C-4-2019) |
GTIN |
4055626156040 |
Weight per piece (including packing) |
316.02 g |
Weight per piece (excluding packing) |
243 g |
Customs tariff number |
85044095 |
Country of origin |
VN |
Classifications
ECLASS
ECLASS-11.0 |
27040701 |
ECLASS-13.0 |
27040701 |
ECLASS-12.0 |
27040701 |
ETIM
UNSPSC
Approvals
IECEE CB Scheme
Approval ID: SI-8860
EAC
Approval ID: RU S-DE.BL08.W.00764
UL Listed
Approval ID: FILE E 123528
cUL Listed
Approval ID: FILE E 123528
EAC
Approval ID: RU S-DE.BL08.W.00764
DNV
Approval ID: TAA00000BV
BV
Approval ID: 44621/B0 BV
cUL Listed
Approval ID: FILE E 199827
UL Listed
Approval ID: FILE E 199827
cULus Listed
cULus Listed
Environmental product compliance
EU RoHS |
Fulfills EU RoHS substance requirements |
Yes |
Exemption |
6(c), 7(c)-I |
China RoHS |
Environment friendly use period (EFUP) |
EFUP-25
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
EU REACH SVHC |
REACH candidate substance (CAS No.) |
Lead (CAS: 7439-92-1) |
SCIP |
93541367-712a-43ff-943d-708f0e440eff |
- Tài liệu kỹ thuật Phoenix Contact QUINT4-PS/1AC/24DC/2.5/SC - 2904598
ở đây.
Tham khảo thêm các model khác cùng loại:
STEP3-PS/1AC/5DC/3/PT/USB-C - Power supply unit
1335698
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, Integrated cable groove with strain relief, input: 1-phase, output: 5 V DC / 3 A, USB-C up to 15 W
STEP3-PS/1AC/5DC/3/PT/USB-A - Power supply unit
1335699
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, Integrated cable groove with strain relief, input: 1-phase, output: 5 V DC / 3 A, USB-A up to 15 W
STEP-PS/ 1AC/24DC/2.5 - Power supply unit
2868651
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/2.5 A
STEP-PS/ 1AC/12DC/3 - Power supply unit
2868570
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/3 A
STEP-PS/ 1AC/24DC/0.75 - Power supply unit
2868635
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/0.75 A
STEP-PS/ 1AC/24DC/1.75 - Power supply unit
2868648
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.75 A
STEP-PS/ 1AC/24DC/0.5 - Power supply unit
2868596
Primary-switched STEP POWER power supply for DIN rail and direct mounting, input: 1-phase, output: 24 V DC/0.5 A
STEP-PS/ 1AC/24DC/4.2 - Power supply unit
2868664
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/4.2 A
STEP3-PS/1AC/24DC/2.5/PT - Power supply unit
1088491
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 2.5 A, adjustable from 22 V DC ... 27 V DC
STEP-PS/ 1AC/12DC/1 - Power supply unit
2868538
Primary-switched STEP POWER power supply for DIN rail and direct mounting, input: 1-phase, output: 12 V DC/1 A
STEP-PS/ 1AC/12DC/5 - Power supply unit
2868583
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/5 A
STEP3-PS/1AC/24DC/5/PT - Power supply unit
1088478
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 5 A, adjustable from 22 V DC ... 27 V DC
STEP-PS/ 1AC/24DC/3.8/C2LPS - Power supply unit
2868677
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/3.8 A
STEP3-PS/1AC/24DC/1.3/PT - Power supply unit
1088494
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 1.3 A
STEP3-PS/1AC/24DC/0.63/PT - Power supply unit
1088495
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 0.63 A
STEP3-PS/1AC/24DC/3.75/PT/LED - Power supply unit
1285036
Primary-switched LED power supply, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 3.75 A
STEP3-PS/1AC/12DC/5/PT - Power supply unit
1170955
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 12 V DC / 5 A, adjustable from 9 V DC ... 17 V DC
STEP3-PS/1AC/48DC/2.5/PT - Power supply unit
1285035
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 48 V DC / 2.5 A, adjustable from 48 V DC ... 56 V DC, PoE application up to 120 W
STEP3-PS/1AC/KNX/640/LPT - Bus power supply
1477019
Primary-switched bus power supply, STEP POWER, Lever Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 30 V DC / 640 mA
STEP-PS/ 1AC/48DC/2 - Power supply unit
2868680
Primary-switched power supply, STEP POWER, screw connection, DIN rail mounting, input: 1-phase, output: 48 V DC / 2 A, adjustable from 30 V DC ... 56 V DC, PoE application up to 96 W
STEP-PS/ 1AC/ 5DC/2 - Power supply unit
2320513
Primary-switched STEP POWER power supply for DIN rail and direct mounting, input: 1-phase, output: 5 V DC/2 A
STEP-PS/ 1AC/24DC/0.75/FL - Power supply unit
2868622
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/0.75 A
STEP-PS/ 1AC/12DC/1.5 - Power supply unit
2868567
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/1.5 A
STEP-PS/ 1AC/15DC/4 - Power supply unit
2868619
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/4 A
STEP-PS/277AC/24DC/3.5 - Power supply unit
2904945
DIN rail power supply unit 24 V DC/3.5 A, primary switched-mode, 1-phase.
STEP3-PS/1AC/24DC/4/PT - Power supply unit
1140066
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 4 A, adjustable from 22 V DC ... 27 V DC
STEP3-PS/1AC/15DC/4/PT - Power supply unit
1170956
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 15 V DC / 4 A, adjustable from 9 V DC ... 17 V DC
STEP3-PS/1AC/12DC/1.3/PT - Power supply unit
1170952
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 12 V DC / 1.3 A
STEP-PS/ 1AC/ 5DC/6.5 - Power supply unit
2868541
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/6.5 A
STEP3-PS/1AC/5DC/3/PT - Power supply unit
1170954
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 5 V DC / 3 A
STEP3-PS/1AC/12DC/2.5/PT - Power supply unit
1170953
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 12 V DC / 2.5 A
STEP3-PS/1AC/24DC/3.75/PT/FL - Power supply unit
1088486
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 3.75 A
STEP-PS/ 1AC/12DC/1.5/FL - Power supply unit
2868554
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/1.5 A
STEP-PS/48AC/24DC/0.5 - Power supply unit
2868716
Primary-switched STEP POWER power supply for DIN rail and direct mounting, input: 1-phase, output: 24 V DC/0.5 A
STEP3-PS/1AC/24DC/3.75/PT/CO - Power supply, with protective coating
1321105
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, with protective coating, input: 1-phase, output: 24 V DC / 3.75 A
UNO-PS/1AC/24DC/ 60W - Power supply unit
2902992
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/60 W
UNO-PS/1AC/24DC/ 30W - Power supply unit
2902991
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/30 W
UNO-PS/1AC/24DC/100W - Power supply unit
2902993
Primary-switched UNO POWER power supply for DIN rail mounting, IEC 60335-1, input: 1-phase, output: 24 V DC / 100 W
UNO2-PS/1AC/24DC/240W - Power supply unit
1096432
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A, adjustable from 24 V DC ... 28 V DC
UNO2-PS/1AC/24DC/120W - Power supply unit
1110466
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 5 A, adjustable from 24 V DC ... 28 V DC
UNO-PS/1AC/12DC/ 30W - Power supply unit
2902998
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/30 W
UNO-PS/2AC/24DC/90W/C2LPS - Power supply unit
2904371
Primary-switched UNO POWER power supply for DIN rail mounting, input: 2-phase, output: 24 V DC/90 W
UNO2-PS/1AC/24DC/480W - Power supply unit
2910105
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 20 A, adjustable from 24 V DC ... 28 V DC
UNO-PS/1AC/24DC/150W - Power supply unit
2904376
Primary-switched UNO power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/150 W
UNO-PS/1AC/12DC/ 55W - Power supply unit
2902999
Primary-switched UNO POWER power supply for DIN rail mounting, IEC 60335-1, input: 1-phase, output: 12 V DC / 55 W
UNO-PS/1AC/12DC/100W - Power supply unit
2902997
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/100 W
UNO-PS/1AC/ 5DC/ 25W - Power supply unit
2904374
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/25 W
UNO2-PS/1AC/48DC/240W - Power supply unit
1110155
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 48 V DC / 5 A, adjustable from 42 V DC ... 56 V DC
UNO-PS/1AC/24DC/100W/H - Power supply unit
1088851
Primary-switched UNO POWER power supply for DIN rail mounting, IEC 60335-1, input: 1-phase, output: 24 V DC / 100 W
UNO2-PS/1AC/24DC/960W - Power supply unit
1110043
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 40 A, adjustable from 24 V DC ... 28 V DC
UNO-PS/1AC/24DC/90W/C2LPS - Power supply unit
2902994
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/90 W
UNO-PS/1AC/48DC/ 60W - Power supply unit
2902995
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 48 V DC/60 W
UNO-PS/1AC/15DC/ 55W - Power supply unit
2903001
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/55 W
UNO-PS/1AC/ 5DC/ 40W - Power supply unit
2904375
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/40 W
UNO-PS/1AC/15DC/100W - Power supply unit
2903002
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/100 W
UNO-PS/1AC/48DC/100W - Power supply unit
2902996
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 48 V DC/100 W
UNO-PS/1AC/12DC/ 55W/H - Power supply unit
1088850
Primary-switched UNO POWER power supply for DIN rail mounting, IEC 60335-1, input: 1-phase, output: 12 V DC / 55 W
UNO-PS/1AC/15DC/30W - Power supply unit
2903000
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/30 W
TRIO-PS67/1AC/24DC/3.75/M12 - Power supply unit
1278165
Primary-switched power supply unit TRIO POWER, M12 circular connector, Wall mounting, input: 1-phase, output: 24 V DC / 3.75 A
TRIO-PS67/1AC/24DC/3.75/IPD - Power supply unit
1278301
Primary-switched power supply unit TRIO POWER, IPD panel feed-through with Push-in spring connection, Wall mounting, input: 1-phase, output: 24 V DC / 3.75 A
TRIO-PS67/1AC/24DC/3.75/M12-A - Power supply unit
1376306
Primary-switched power supply unit TRIO POWER, M12 circular connector, Wall mounting, input: 1-phase, output: 24 V DC / 3.75 A
TRIO-PS67/1AC/24DC/3.75/INC - Power supply unit
1278302
Primary-switched power supply unit TRIO POWER, 7/8″ circular connector, Wall mounting, input: 1-phase, output: 24 V DC / 3.75 A
TRIO-PS67/1AC/24DC/10/M12 - Power supply unit
1111634
Primary-switched power supply unit TRIO POWER, M12 circular connector, Wall mounting, input: 1-phase, output: 24 V DC / 10 A