Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613 là Bộ cấp nguồn chuyển mạch chính QUINT POWER, Kết nối vít, Lắp thanh ray DIN, đầu vào 1 pha, đầu ra 110VDC 4A
- Tài liệu kỹ thuật Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613 ở đây.
Hình thực tế của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Bộ nguồn thuộc dòng QUINT POWER, nối vít, Lắp DIN rail, đầu vào 1 pha AC, đầu ra 110VDC 4A
Mô tả của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
- Thế hệ thứ tư của bộ nguồn QUINT POWER hiệu suất cao đảm bảo tính khả dụng của hệ thống vượt trội thông qua các chức năng mới. Ngưỡng tín hiệu và đường cong đặc tính có thể được điều chỉnh riêng lẻ thông qua giao diện NFC.
- Công nghệ SFB độc đáo và chức năng giám sát phòng ngừa của bộ nguồn QUINT POWER làm tăng tính khả dụng của ứng dụng của bạn.
Thông số kỹ thuật của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Input data của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Control input (configurable) Rem |
Output power ON/OFF (SLEEP MODE) |
Default |
Output power ON (>40 kΩ/24 V DC/open bridge between Rem and SGnd) |
AC operation |
Nominal input voltage range |
100 V AC ... 240 V AC |
Input voltage range |
100 V AC ... 240 V AC -10 % ... +10 % |
Derating |
< 100 V AC (1 %/V) |
Electric strength, max. |
300 V AC 60 s |
Typical national grid voltage |
120 V AC |
230 V AC |
Voltage type of supply voltage |
AC |
Inrush current |
typ. 11 A (at 25 °C) |
Inrush current integral (I2t) |
< 0.3 A2s |
Inrush current limitation |
11 A |
AC frequency range |
50 Hz ... 60 Hz -10 % ... +10 % |
Frequency range (fN) |
50 Hz ... 60 Hz -10 % ... +10 % |
Mains buffering time |
typ. 37 ms (120 V AC) |
typ. 38 ms (230 V AC) |
Current consumption |
6.3 A (100 V AC) |
5 A (120 V AC) |
2.6 A (230 V AC) |
2.5 A (240 V AC) |
Nominal power consumption |
474 VA |
Protective circuit |
Transient surge protection; Varistor, gas-filled surge arrester |
Power factor (cos phi) |
0.94 |
Switch-on time |
< 1 s |
Typical response time |
300 ms (from SLEEP MODE) |
Input fuse |
12 A (slow-blow, internal) |
Recommended breaker for input protection |
10 A ... 16 A (Characteristic B, C or comparable) |
Discharge current to PE |
< 3.5 mA |
0.7 mA (264 V AC, 60 Hz) |
DC operation |
Nominal input voltage range |
110 V DC ... 250 V DC |
Input voltage range |
110 V DC ... 250 V DC -18 % ... +40 % |
Derating |
< 110 V DC (1 %/V) |
Voltage type of supply voltage |
DC |
Current consumption |
5.6 A (110 V DC) |
2.3 A (250 V DC) |
Thông số đầu ra của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Efficiency |
typ. 93.5 % (120 V AC) |
typ. 94.7 % (230 V AC) |
Output characteristic |
U/I Advanced |
Smart HICCUP |
FUSE MODE |
Nominal output voltage |
110 V DC |
Setting range of the output voltage (USet) |
110 V DC ... 135 V DC (constant capacity) |
Nominal output current (IN) |
4 A |
Static Boost (IStat.Boost) |
5 A |
Dynamic Boost (IDyn.Boost) |
6 A (5 s) |
Selective Fuse Breaking (ISFB) |
24 A (15 ms) |
Magnetic circuit breaker tripping |
A1 ... A4 / B2 ... B4 / C1 ... C2 / Z1 ... Z4 |
Derating |
> 60 °C ... 70 °C (2.5 %/K) |
Feedback voltage resistance |
≤ 160 V DC |
Protection against overvoltage at the output (OVP) |
< 150 V DC |
Control deviation |
< 0.5 % (Static load change 10 % ... 90 %) |
< 4 % (Dynamic load change 10 % ... 90 %, (10 Hz)) |
< 0.25 % (change in input voltage ±10 %) |
Residual ripple |
< 600 mVPP (with nominal values) |
Short-circuit-proof |
yes |
No-load proof |
yes |
Output power |
440 W |
550 W |
660 W |
Apparent power |
336 VA (120 V, UOUT = 24 V, IOUT = stat. Boost) |
345 VA (230 V, UOUT = 24 V, IOUT = stat. Boost) |
Maximum no-load power dissipation |
< 7 W (120 V AC) |
< 7 W (230 V AC) |
Power loss nominal load max. |
< 31 W (120 V AC) |
< 25 W (230 V AC) |
Power dissipation SLEEP MODE |
< 7 W (120 V AC) |
< 7 W (230 V AC) |
Crest factor |
typ. 1.54 (120 V AC) |
typ. 1.57 (230 V AC) |
Rise time |
< 1 s (UOut = 10 % ... 90 %) |
Connection in parallel |
yes, for redundancy and increased capacity |
Connection in series |
yes |
Signal |
Signal ground SGnd |
Reference potential for Out1, Out2, and Rem |
Signal Out 1 (configurable) |
Digital |
24 V DC 20 mA |
Default |
24 V DC 20 mA 24 V DC for UOut > 0.9 x USet |
Signal Out 2 (configurable) |
Digital |
24 V DC 20 mA |
Analog |
4 mA ... 20 mA ±5 % (Load ≤400 Ω) |
Default |
24 V DC 20 mA 24 V DC for POut < PN |
Signal relay 13/14 (configurable) |
Default |
closed (Uout > 0.9 USet) |
Digital |
24 V DC 1 A |
30 V AC/DC 0.5 A |
Thông số kết nối dữ liệu của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Input |
Connection method |
Screw connection |
Conductor cross section, rigid min. |
0.2 mm² |
Conductor cross section, rigid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Single conductor/flexible terminal point with ferrule with plastic sleeve, min. |
0.25 mm² |
Single conductor/flexible terminal point with ferrule with plastic sleeve, max. |
2.5 mm² |
Single conductor/flexible terminal point with ferrule without plastic sleeve, min. |
0.25 mm² |
Single conductor/flexible terminal point with ferrule without plastic sleeve, max. |
2.5 mm² |
Conductor cross section AWG min. |
24 |
Conductor cross section AWG max. |
14 |
Stripping length |
6.5 mm |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Output |
Connection method |
Screw connection |
Conductor cross section, rigid min. |
0.2 mm² |
Conductor cross section, rigid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Single conductor/flexible terminal point with ferrule with plastic sleeve, min. |
0.25 mm² |
Single conductor/flexible terminal point with ferrule with plastic sleeve, max. |
2.5 mm² |
Single conductor/flexible terminal point with ferrule without plastic sleeve, min. |
0.25 mm² |
Single conductor/flexible terminal point with ferrule without plastic sleeve, max. |
2.5 mm² |
Conductor cross section AWG min. |
24 |
Conductor cross section AWG max. |
14 |
Stripping length |
6.5 mm |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Signal |
Connection method |
Push-in connection |
Conductor cross section, rigid min. |
0.2 mm² |
Conductor cross section, rigid max. |
1 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
1.5 mm² |
Single conductor/flexible terminal point with ferrule with plastic sleeve, min. |
0.2 mm² |
Single conductor/flexible terminal point with ferrule with plastic sleeve, max. |
0.75 mm² |
Single conductor/flexible terminal point with ferrule without plastic sleeve, min. |
0.2 mm² |
Single conductor/flexible terminal point with ferrule without plastic sleeve, max. |
1.5 mm² |
Conductor cross section AWG min. |
24 |
Conductor cross section AWG max. |
16 |
Stripping length |
8 mm |
Thông số hiển thị của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Types of signaling |
LED |
Floating signal contact |
Active signal output Out1 (digital, configurable) |
Active signal output Out2 (analog, configurable) |
Remote contact |
Signal ground SGnd |
Signal output |
POut |
> 100 % (LED lights up yellow, output power > 440 W) |
> 75 % (LED lights up green, output power > 330 W) |
> 50 % (LED lights up green, output power > 220 W) |
UOut |
> 0.9 x USet (LED lights up green) |
< 0.9 x USet (LED flashes green) |
Thông số chi tiết vể điện của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Number of phases |
1.00 |
Insulation voltage input/output |
4 kV AC (type test) |
2 kV AC (routine test) |
Insulation voltage output / PE |
0.5 kV DC (type test) |
0.5 kV DC (routine test) |
Insulation voltage input / PE |
3.5 kV AC (type test) |
2.4 kV AC (routine test) |
Switching frequency |
90.00 kHz ... 110.00 kHz (Auxiliary converter stage) |
80.00 kHz ... 340.00 kHz (Main converter stage) |
50.00 kHz ... 70.00 kHz (PFC stage) |
Thông số chi tiết về sản phẩm của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Product type |
Power supply |
Product family |
QUINT POWER |
MTBF (IEC 61709, SN 29500) |
> 1169000 h (25 °C) |
> 688000 h (40 °C) |
> 308000 h (60 °C) |
Environmental protection directive |
RoHS Directive 2011/65/EU |
WEEE |
Reach |
Data management status |
Article revision |
02 |
Insulation characteristics |
Protection class |
I |
Degree of pollution |
2 |
Life expectancy (electrolytic capacitors) |
Current |
2 A |
Temperature |
40 °C |
Time |
218000 h |
Additional text |
120 V AC |
Life expectancy (electrolytic capacitors) |
Current |
2 A |
Temperature |
40 °C |
Time |
322000 h |
Additional text |
230 V AC |
Life expectancy (electrolytic capacitors) |
Current |
4 A |
Temperature |
25 °C |
Time |
528000 h |
Additional text |
120 V AC |
Life expectancy (electrolytic capacitors) |
Current |
4 A |
Temperature |
25 °C |
Time |
817000 h |
Additional text |
230 V AC |
Life expectancy (electrolytic capacitors) |
Current |
4 A |
Temperature |
40 °C |
Time |
176000 h |
Additional text |
120 V AC |
Life expectancy (electrolytic capacitors) |
Current |
4 A |
Temperature |
40 °C |
Time |
272000 h |
Additional text |
230 V AC |
Thông số kích thước của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Dimensional drawing |
 |
Width |
70 mm |
Height |
130 mm |
Depth |
125 mm |
Installation dimensions |
Installation distance right/left |
5 mm / 5 mm |
Installation distance top/bottom |
50 mm / 50 mm |
Thông số lắp đặt của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Mounting type |
DIN rail mounting |
With protective coating |
no |
Thông số cơ học của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Flammability rating according to UL 94 (housing / terminal blocks) |
V0 |
Housing material |
Metal |
Thông số môi trường vận hành và tuổi thọ của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Ambient conditions |
Degree of protection |
IP20 |
Ambient temperature (operation) |
-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) |
Ambient temperature (storage/transport) |
-40 °C ... 85 °C |
Ambient temperature (start-up type tested) |
-40 °C |
Maximum altitude |
≤ 4000 m (> 2000 m, observe derating) |
Climatic class |
3K3 (in acc. with EN 60721) |
Max. permissible relative humidity (operation) |
≤ 95 % (at 25 °C, non-condensing) |
Shock |
18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) |
5 Hz ... 100 Hz resonance search 2.3g, 90 min., resonance frequency 2.3g, 90 min. (according to DNV GL Class C) |
Thông số Quy-Chuẩn của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Rail applications |
EN 50121-3-2 |
EN 50121-5 |
EN 50163 |
IEC 62236-3-2 |
IEC 62236-5 |
Standard – Limitation of mains harmonic currents |
EN 61000-3-2 |
Standard - Electrical safety |
IEC 61010-2-201 |
Standard - Safe isolation |
IEC 61010-2-201 |
Standard - safety for equipment for measurement, control, and laboratory use |
IEC 61010-1 |
Battery charging |
DIN 41773-1 |
Approval - requirement of the semiconductor industry with regard to mains voltage dips |
SEMI F47-0706, EN 61000-4-11 |
Overvoltage category |
EN 61010-1 |
II (≤ 4000 m) |
EN 62477-1 |
III (≤ 2000 m) |
Thông số Chứng thực của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
CSA |
CAN/CSA-C22.2 No. 61010-1-1 |
CAN/CSA-C22.2 No. 61010-1-12 |
Shipbuilding approval |
DNV GL applied for |
SIQ |
BG (type approved) |
CB-Scheme (IEC 61010-1, IEC 61010-2-201, IEC 60950-1) |
UL approvals |
UL Listed UL 61010-1 |
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) applied for |
Thông số EMC data của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Electromagnetic compatibility |
Conformance with EMC Directive 2014/30/EU |
Low Voltage Directive |
Conformance with Low Voltage Directive 2014/35/EC |
Interference emission |
Interference emission in accordance with EN 61000-6-3 (residential and commercial) and EN 61000-6-4 (industrial) |
EMC requirements for noise immunity |
EN 61000-6-1 |
EN 61000-6-2 |
Noise immunity |
Immunity in accordance with EN 61000-6-1 (residential), EN 61000-6-2 (industrial), and EN 61000-6-5 (power station equipment zone), IEC/EN 61850-3 (power supply) |
EMC requirements for power supply |
IEC 61850-3 (G,H) |
EN 61000-6-5 (switching devices) |
Conducted noise emission |
EN 55016 |
EN 61000-6-3 (Class B) |
Noise emission |
Additional basic standard EN 61000-6-5 (immunity in power station), IEC/EN 61850-3 (energy supply) |
Noise emission |
EN 55016 |
EN 61000-6-3 (Class B) |
DNV GL conducted interference |
Class A |
Additional text |
Area power distribution |
DNV GL noise radiation |
Class B |
Additional text |
Bridge and deck area |
Harmonic currents |
Standards/regulations |
EN 61000-3-2 |
EN 61000-3-2 (Class A) |
Frequency range |
0 kHz ... 2 kHz |
Flicker |
Standards/regulations |
EN 61000-3-3 |
EN 61000-3-3 |
Frequency range |
0 kHz ... 2 kHz |
Electrostatic discharge |
Standards/regulations |
EN 61000-4-2 |
Electrostatic discharge |
Contact discharge |
8 kV (Test Level 4) |
Discharge in air |
15 kV (Test Level 4) |
Comments |
Criterion A |
Electromagnetic HF field |
Standards/regulations |
EN 61000-4-3 |
Electromagnetic HF field |
Frequency range |
80 MHz ... 1 GHz |
Test field strength |
20 V/m (Test Level 3) |
Frequency range |
1 GHz ... 6 GHz |
Test field strength |
10 V/m (Test Level 3) |
Comments |
Criterion A |
Fast transients (burst) |
Standards/regulations |
EN 61000-4-4 |
Fast transients (burst) |
Input |
4 kV (Test Level 4 - asymmetrical) |
Output |
4 kV (Test Level 4 - asymmetrical) |
Signal |
4 kV (Test Level 4 - asymmetrical) |
Comments |
Criterion A |
Surge voltage load (surge) |
Standards/regulations |
EN 61000-4-5 |
Surge voltage load (surge) |
Input |
typ. 3 kV (Test Level 4 - symmetrical) |
typ. 6 kV (Test Level 4 - asymmetrical) |
Output |
1 kV (Test Level 3 - symmetrical) |
2 kV (Test Level 3 - asymmetrical) |
Signal |
4 kV (Test Level 4 - asymmetrical) |
Comments |
Criterion A |
Conducted interference |
Standards/regulations |
EN 61000-4-6 |
Conducted interference |
I/O/S |
asymmetrical |
Frequency range |
10 kHz ... 80 MHz |
Comments |
Criterion A |
Voltage |
10 V (Test Level 3) |
Power frequency magnetic field |
Standards/regulations |
EN 61000-4-8 |
Frequency |
16.7 Hz |
50 Hz |
60 Hz |
Test field strength |
100 A/m |
Additional text |
60 s |
Comments |
Criterion A |
Frequency |
50 Hz |
60 Hz |
Frequency range |
50 Hz ... 60 Hz |
Test field strength |
1 kA/m |
Additional text |
3 s |
Frequency |
0 Hz |
Test field strength |
300 A/m |
Additional text |
DC, 60 s |
Voltage dips |
Standards/regulations |
EN 61000-4-11 |
Voltage |
230 V AC |
Frequency |
50 Hz |
Voltage dip |
70 % |
Number of periods |
0.5 / 1 / 25 / 30 periods |
Additional text |
Test Level 2 |
Comments |
Criterion A: 0.5 / 1 / 25 / 30 periods |
Voltage dip |
40 % |
Number of periods |
5 / 10 / 50 periods |
Additional text |
Test Level 2 |
Comments |
Criterion A |
Voltage dip |
0 % |
Number of periods |
0,5 / 1 / 5 / 50 / 250 periods |
Additional text |
Test Level 2 |
Comments |
Criterion A: 0.5 / 1 period
Criterion B: 5 / 50 / 250 periods |
Pulse-shape magnetic field |
Standards/regulations |
EN 61000-4-9 |
Test field strength |
1000 A/m |
Comments |
Criterion A |
Attenuated sinusoidal oscillations (ring wave) |
Standards/regulations |
EN 61000-4-12 |
Input |
2 kV (Test Level 4 - symmetrical) |
4 kV (Test Level 4 - asymmetrical) |
Comments |
Criterion A |
Asymmetrical conducted disturbance variables |
Standards/regulations |
EN 61000-4-16 |
Test level 1 |
15 Hz 150 Hz (Test Level 4) |
Voltage |
30 V 3 V |
Test level 2 |
150 Hz 1.5 kHz (Test Level 4) |
Voltage |
3 V |
Test level 3 |
1.5 kHz 15 kHz (Test Level 4) |
Voltage |
3 V 30 V |
Test level 4 |
15 kHz 150 kHz (Test Level 4) |
Voltage |
30 V |
Test level 5 |
16.7 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 4) |
Voltage |
30 V (10 s) |
Test level 6 |
16.7 Hz 50 Hz 60 Hz (Test Level 4) |
Voltage |
300 V (1 s) |
Comments |
Criterion A |
Attenuated oscillating wave |
Standards/regulations |
EN 61000-4-18 |
Input, output (test level 1) |
100 kHz 1 MHz (Test Level 3 - symmetrical) |
Voltage |
1 kV |
Input, output (test level 2) |
10 MHz |
Voltage |
2 kV |
Input, output (test level 3) |
100 kHz 1 MHz (Test Level 3 - asymmetrical) |
Voltage |
2.5 kV |
Signals (test level 1) |
100 kHz 1 MHz (Test Level 3 - symmetrical) |
Voltage |
1 kV |
Signals (test level 2) |
100 kHz 1 MHz (Test Level 3 - asymmetrical) |
Voltage |
2.5 kV |
Comments |
Criterion A |
Attenuated oscillating magnetic field |
Standards/regulations |
EN 61000-4-10 |
Test field strength |
100 A/m |
Test level 1 |
100 kHz |
Test field strength |
100 A/m |
Test level 2 |
1 MHz |
Comments |
Criterion A |
Criteria |
Criterion A |
Normal operating behavior within the specified limits. |
Criterion B |
Temporary impairment to operational behavior that is corrected by the device itself. |
Criterion C |
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements. |
Thông số thương mại của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Item number |
2904613 |
Packing unit |
1 pc |
Minimum order quantity |
1 pc |
Product key |
CMPI14 |
GTIN |
4063151023461 |
Weight per piece (including packing) |
1,619 g |
Weight per piece (excluding packing) |
1,265 g |
Customs tariff number |
85044095 |
Country of origin |
TH |
Classifications của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
ECLASS của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
ECLASS-11.0 |
27040701 |
ECLASS-12.0 |
27040701 |
ECLASS-13.0 |
27040701 |
ETIM của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
UNSPSC của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
Approvals của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
NK
Approval ID: TA21182M
EAC
Approval ID: RU S-DE.BL08.W.00764
DNV
Approval ID: TAA00000BV
BV
Approval ID: 44621/B0 BV
Thông số an toàn môi trường của Bộ nguồn Phoenix Contact QUINT4-PS/1AC/110DC/4 - 2904613
EU RoHS |
Fulfills EU RoHS substance requirements |
Yes |
Exemption |
7(a), 7(c)-I |
China RoHS |
Environment friendly use period (EFUP) |
EFUP-25
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
EU REACH SVHC |
REACH candidate substance (CAS No.) |
Lead (CAS: 7439-92-1) |
SCIP |
0852a0eb-2ae0-4057-8ce5-81c3a4850200 |
Tham khảo các model khác cùng loại:
STEP3-PS/1AC/5DC/3/PT/USB-C - Power supply unit
1335698
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, Integrated cable groove with strain relief, input: 1-phase, output: 5 V DC / 3 A, USB-C up to 15 W
STEP3-PS/1AC/5DC/3/PT/USB-A - Power supply unit
1335699
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, Integrated cable groove with strain relief, input: 1-phase, output: 5 V DC / 3 A, USB-A up to 15 W
STEP3-PS/1AC/48DC/2.5/PT - Power supply unit
1285035
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 48 V DC / 2.5 A, adjustable from 48 V DC ... 56 V DC, PoE application up to 120 W
STEP-PS/ 1AC/24DC/2.5 - Power supply unit
2868651
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/2.5 A
STEP-PS/ 1AC/24DC/0.75 - Power supply unit
2868635
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/0.75 A
STEP-PS/ 1AC/24DC/1.75 - Power supply unit
2868648
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.75 A
STEP-PS/ 1AC/12DC/3 - Power supply unit
2868570
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/3 A
STEP-PS/ 1AC/24DC/0.5 - Power supply unit
2868596
Primary-switched STEP POWER power supply for DIN rail and direct mounting, input: 1-phase, output: 24 V DC/0.5 A
STEP-PS/ 1AC/24DC/4.2 - Power supply unit
2868664
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/4.2 A
STEP-PS/ 1AC/12DC/1 - Power supply unit
2868538
Primary-switched STEP POWER power supply for DIN rail and direct mounting, input: 1-phase, output: 12 V DC/1 A
STEP-PS/ 1AC/12DC/5 - Power supply unit
2868583
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/5 A
STEP3-PS/1AC/24DC/5/PT - Power supply unit
1088478
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 5 A, adjustable from 22 V DC ... 27 V DC
STEP3-PS/1AC/24DC/3.75/PT/LED - Power supply unit
1285036
Primary-switched LED power supply, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 3.75 A
STEP3-PS/1AC/24DC/2.5/PT - Power supply unit
1088491
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 2.5 A, adjustable from 22 V DC ... 27 V DC
STEP3-PS/1AC/24DC/0.63/PT - Power supply unit
1088495
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 0.63 A
STEP3-PS/1AC/KNX/640/LPT - Bus power supply
1477019
Primary-switched bus power supply, STEP POWER, Lever Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 30 V DC / 640 mA
STEP-PS/ 1AC/48DC/2 - Power supply unit
2868680
Primary-switched power supply, STEP POWER, screw connection, DIN rail mounting, input: 1-phase, output: 48 V DC / 2 A, adjustable from 30 V DC ... 56 V DC, PoE application up to 96 W
STEP3-PS/1AC/24DC/1.3/PT - Power supply unit
1088494
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 1.3 A
STEP3-PS/1AC/5DC/3/PT - Power supply unit
1170954
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 5 V DC / 3 A
STEP3-PS/1AC/12DC/1.3/PT - Power supply unit
1170952
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 12 V DC / 1.3 A
STEP3-PS/1AC/12DC/5/PT - Power supply unit
1170955
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 12 V DC / 5 A, adjustable from 9 V DC ... 17 V DC
STEP-PS/ 1AC/ 5DC/2 - Power supply unit
2320513
Primary-switched STEP POWER power supply for DIN rail and direct mounting, input: 1-phase, output: 5 V DC/2 A
STEP3-PS/1AC/24DC/4/PT - Power supply unit
1140066
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 4 A, adjustable from 22 V DC ... 27 V DC
STEP-PS/ 1AC/24DC/0.75/FL - Power supply unit
2868622
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/0.75 A
STEP-PS/ 1AC/24DC/3.8/C2LPS - Power supply unit
2868677
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/3.8 A
STEP-PS/48AC/24DC/0.5 - Power supply unit
2868716
Primary-switched STEP POWER power supply for DIN rail and direct mounting, input: 1-phase, output: 24 V DC/0.5 A
STEP-PS/277AC/24DC/3.5 - Power supply unit
2904945
DIN rail power supply unit 24 V DC/3.5 A, primary switched-mode, 1-phase.
STEP3-PS/1AC/15DC/4/PT - Power supply unit
1170956
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 15 V DC / 4 A, adjustable from 9 V DC ... 17 V DC
STEP-PS/ 1AC/12DC/1.5 - Power supply unit
2868567
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/1.5 A
STEP-PS/ 1AC/15DC/4 - Power supply unit
2868619
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/4 A
STEP-PS/ 1AC/ 5DC/6.5 - Power supply unit
2868541
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/6.5 A
STEP3-PS/1AC/12DC/2.5/PT - Power supply unit
1170953
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 12 V DC / 2.5 A
STEP3-PS/1AC/24DC/3.75/PT/FL - Power supply unit
1088486
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 24 V DC / 3.75 A
STEP-PS/ 1AC/12DC/1.5/FL - Power supply unit
2868554
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/1.5 A
STEP3-PS/1AC/24DC/3.75/PT/CO - Power supply, with protective coating
1321105
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, with protective coating, input: 1-phase, output: 24 V DC / 3.75 A
UNO-PS/1AC/24DC/ 60W - Power supply unit
2902992
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/60 W
UNO-PS/1AC/24DC/ 30W - Power supply unit
2902991
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/30 W
UNO2-PS/1AC/24DC/240W - Power supply unit
1096432
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A, adjustable from 24 V DC ... 28 V DC
UNO2-PS/1AC/24DC/120W - Power supply unit
1110466
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 5 A, adjustable from 24 V DC ... 28 V DC
UNO-PS/1AC/24DC/100W - Power supply unit
2902993
Primary-switched UNO POWER power supply for DIN rail mounting, IEC 60335-1, input: 1-phase, output: 24 V DC / 100 W
UNO-PS/1AC/12DC/ 30W - Power supply unit
2902998
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/30 W
UNO-PS/2AC/24DC/90W/C2LPS - Power supply unit
2904371
Primary-switched UNO POWER power supply for DIN rail mounting, input: 2-phase, output: 24 V DC/90 W
UNO-PS/1AC/12DC/ 55W - Power supply unit
2902999
Primary-switched UNO POWER power supply for DIN rail mounting, IEC 60335-1, input: 1-phase, output: 12 V DC / 55 W
UNO-PS/1AC/ 5DC/ 25W - Power supply unit
2904374
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/25 W
UNO2-PS/1AC/24DC/480W - Power supply unit
2910105
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 20 A, adjustable from 24 V DC ... 28 V DC
UNO-PS/1AC/24DC/150W - Power supply unit
2904376
Primary-switched UNO power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/150 W
UNO-PS/1AC/12DC/100W - Power supply unit
2902997
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/100 W
UNO2-PS/1AC/48DC/240W - Power supply unit
1110155
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 48 V DC / 5 A, adjustable from 42 V DC ... 56 V DC
UNO2-PS/1AC/24DC/960W - Power supply unit
1110043
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 40 A, adjustable from 24 V DC ... 28 V DC
UNO-PS/1AC/24DC/100W/H - Power supply unit
1088851
Primary-switched UNO POWER power supply for DIN rail mounting, IEC 60335-1, input: 1-phase, output: 24 V DC / 100 W
UNO-PS/1AC/24DC/90W/C2LPS - Power supply unit
2902994
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/90 W
UNO-PS/1AC/12DC/ 55W/H - Power supply unit
1088850
Primary-switched UNO POWER power supply for DIN rail mounting, IEC 60335-1, input: 1-phase, output: 12 V DC / 55 W
UNO-PS/1AC/15DC/30W - Power supply unit
2903000
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/30 W
UNO-PS/1AC/ 5DC/ 40W - Power supply unit
2904375
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/40 W
UNO-PS/1AC/48DC/ 60W - Power supply unit
2902995
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 48 V DC/60 W
UNO-PS/1AC/15DC/ 55W - Power supply unit
2903001
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/55 W
UNO-PS/1AC/15DC/100W - Power supply unit
2903002
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/100 W
UNO-PS/1AC/48DC/100W - Power supply unit
2902996
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 48 V DC/100 W
TRIO3-PS/3AC/24DC/40/8C/IOL - Power supply unit
1362792
Primary-switched power supply unit, TRIO POWER, Push-in connection, 8-channel electronic circuit breaker, IO-Link, DIN rail mounting, input: 3-phase, output: 24 V DC / 40 A, adjustable from 24 V DC ... 28 V DC
TRIO-PS-2G/1AC/24DC/5 - Power supply unit
2903148
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 1-phase, output: 24 V DC/5 A
TRIO-PS-2G/1AC/24DC/10 - Power supply unit
2903149
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: single phase, output: 24 V DC/10 A
TRIO3-PS/1AC/24DC/5 - Power supply unit
1159037
Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 5 A, adjustable from 24 V DC ... 28 V DC
TRIO-PS-2G/3AC/24DC/20 - Power supply unit
2903155
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 3-phase, output: 24 V DC/20 A
TRIO3-PS/1AC/24DC/10 - Power supply unit
1159038
Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A, adjustable from 24 V DC ... 28 V DC
TRIO-PS-2G/1AC/24DC/3/C2LPS - Power supply unit
2903147
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 1-phase, output: 24 V DC/3 A C2LPS
TRIO-PS-2G/3AC/24DC/5 - Power supply unit
2903153
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 3-phase, output: 24 V DC/5 A
TRIO-PS-2G/1AC/24DC/20 - Power supply unit
2903151
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: single-phase, output: 24 V DC/20 A
TRIO3-PS/1AC/24DC/20 - Power supply unit
1159039
Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 20 A, adjustable from 24 V DC ... 28 V DC
TRIO3-PS/1AC/24DC/10/4C/IOL - Power supply unit
1252696
Primary-switched power supply unit, TRIO POWER, Push-in connection, 4-channel electronic circuit breaker, IO-Link, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A, adjustable from 24 V DC ... 28 V DC
TRIO3-PS/1AC/24DC/20/8C/IOL - Power supply unit
1252697
Primary-switched power supply unit, TRIO POWER, Push-in connection, 8-channel electronic circuit breaker, IO-Link, DIN rail mounting, input: 1-phase, output: 24 V DC / 20 A, adjustable from 24 V DC ... 28 V DC
TRIO-PS-2G/3AC/24DC/40 - Power supply unit
2903156
Primary-switched TRIO power supply for DIN rail mounting, input: 3-phase, output: 24 V DC/40 A, dynamic boost, tool-free fast connection technology for solid and stranded conductors with ferrule
TRIO3-PS/3AC/24DC/20 - Power supply unit
1159044
Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 3-phase, output: 24 V DC / 20 A, adjustable from 24 V DC ... 28 V DC
TRIO-PS-2G/1AC/12DC/10 - Power supply unit
2903158
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 1-phase, output: 12 V DC/10 A
TRIO3-PS/3AC/24DC/10 - Power supply unit
1159042
Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 3-phase, output: 24 V DC / 10 A, adjustable from 24 V DC ... 28 V DC
TRIO-PS-2G/3AC/24DC/10 - Power supply unit
2903154
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 3-phase, output: 24 V DC/10 A
TRIO3-PS/3AC/24DC/40 - Power supply unit
1159045
Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 3-phase, output: 24 V DC / 40 A, adjustable from 24 V DC ... 28 V DC
TRIO-PS-2G/1AC/48DC/5 - Power supply unit
2903159
Primary-switched TRIO power supply for DIN rail mounting, input: 1-phase, output: 48 V DC / 5 A, dynamic boost, tool-free fast connection technology for solid and stranded conductors with ferrule
TRIO-PS/1AC/12DC/ 5 - Power supply unit
2866475
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/5 A
TRIO-PS-2G/1AC/12DC/5/C2LPS - Power supply unit
2903157
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 1-phase, output: 12 V DC/5 A C2LPS
TRIO3-PS/1AC/24DC/10/CO - Power supply unit
1523019
Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A, adjustable from 24 V DC ... 28 V DC
TRIO3-PS/1AC/24DC/5/CO - Power supply unit
1523018
Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 5 A, adjustable from 24 V DC ... 28 V DC
TRIO3-PS/3AC/24DC/20/8C/IOL - Power supply unit
1362791
Primary-switched power supply unit, TRIO POWER, Push-in connection, 8-channel electronic circuit breaker, IO-Link, DIN rail mounting, input: 3-phase, output: 24 V DC / 20 A, adjustable from 24 V DC ... 28 V DC
TRIO3-PS/1AC/24DC/20/CO - Power supply unit
1523020
Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 20 A, adjustable from 24 V DC ... 28 V DC
TRIO-PS/1AC/48DC/10 - Power supply unit
2866501
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 48 V DC/10 A
TRIO-PS-2G/1AC/24DC/10/B+D - Power supply unit
2903145
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: single phase, output: 24 V DC/10 A
TRIO-PS-2G/1AC/48DC/10 - Power supply unit
2903160
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: single phase, output: 48 V DC/10 A
TRIO-PS/1AC/5DC/10 - Power supply unit
2902646
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/10 A
TRIO-PS-2G/3AC/72DC/14 - Power supply unit
1076188
Primary-switched TRIO power supply for DIN rail mounting, input: 3-phase, output: 72 V DC/14 A, dynamic boost, tool-free fast connection technology for rigid and flexible conductors with ferrule
TRIO-PS-2G/230AC-400DC/48DC/5 - Power supply unit
1157806
Primary-switched TRIO power supply for DIN rail mounting, input: 230 V AC/400 V DC, output: 48 V DC / 5 A, dynamic boost, tool-free fast-connection technology for rigid and flexible conductors with ferrule
TRIO-PS-2G/1AC/24DC/5/B+D - Power supply unit
2903144
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 1-phase, output: 24 V DC/5 A
TRIO-PS/1AC/12DC/10 - Power supply unit
2866488
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/10 A
TRIO-PS/3AC/24DC/40 - Power supply unit
2866404
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 3-phase, output: 24 V DC/40 A
TRIO-PS/1AC/48DC/ 5 - Power supply unit
2866491
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 48 V DC/5 A
QUINT4-PS/1AC/24DC/10 - Power supply unit
2904601
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/10 A
QUINT4-PS/1AC/24DC/5 - Power supply unit
2904600
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/5 A
QUINT4-PS/1AC/24DC/20 - Power supply unit
2904602
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/20 A
QUINT4-PS/1AC/24DC/40 - Power supply unit
2904603
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/40 A
QUINT4-PS/1AC/24DC/1.3/SC - Power supply unit
2904597
Primary-switched power supply unit QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 1.3 A
QUINT4-PS/1AC/24DC/20/+ - Power supply unit
2904617
Primary-switched QUINT POWER supply for DIN rail mounting, with selectable output characteristic curve and SFB Technology (selective fuse breaking), protective coating and integrated decoupling MOSFET, input: 1-phase, output: 24 V DC / 20 A
QUINT4-PS/3AC/24DC/40 - Power supply unit
2904623
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/40 A
QUINT4-PS/1AC/24DC/2.5/SC - Power supply unit
2904598
Primary-switched power supply unit QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 2.5 A. Alternative item: 2909576
QUINT4-PS/3AC/24DC/20 - Power supply unit
2904622
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/20 A
QUINT4-PS/3AC/24DC/10 - Power supply unit
2904621
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/10 A
QUINT4-PS/1AC/110DC/4 - Power supply unit
2904613
Primary-switched power supply unit QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 110 V DC / 4 A
QUINT4-PS/1AC/24DC/2.5/PT - Power supply unit
2909576
Primary-switched power supply unit QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 2.5 A
QUINT4-PS/1AC/12DC/2.5/PT - Power supply unit
2904605
Primary-switched power supply unit QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 12 V DC / 2.5 A
QUINT4-PS/1AC/24DC/3.8/SC - Power supply unit
2904599
Primary-switched power supply unit QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 3.8 A
QUINT4-PS/1AC/2X15DC/2/PT - Power supply unit
2904596
Primary-switched power supply unit QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 15 V DC / 2 A
QUINT4-PS/1AC/48DC/10 - Power supply unit
2904611
Primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (Selective Fuse Breaking) technology, input: 1-phase, output: 48 V DC / 10 A
QUINT4-PS/3AC/24DC/5 - Power supply unit
2904620
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/5 A
QUINT4-PS/1AC/12DC/15 - Power supply unit
2904608
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (Selective Fuse Breaking) Technology, and NFC interface, input: 1-phase, output: 12 V DC / 15 A
QUINT4-SYS-PS/1AC/24DC/2.5/SC - Power supply unit
2904614
Primary-switched power supply, QUINT POWER, screw connection, DIN rail mounting, supply of devices possible via the TBUS DIN rail connector, protective coating, input: single-phase, output: 24 V DC/2.5 A
QUINT-PS/1AC/24DC/ 5/CO - Power supply, with protective coating
2320908
Primary-switched power supply unit QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 5 A
QUINT4-PS/1AC/48DC/20 - Power supply unit
2904612
QUINT POWER primary-switched power supply with free choice of output characteristic curve, SFB (Selective Fuse Breaking) Technology, and NFC interface, input: 1-phase, output: 48 V DC/20 A
QUINT4-PS/1AC/24DC/40/+ - Power supply unit
2904618
Primary-switched QUINT POWER supply for DIN rail mounting, with selectable output characteristic curve and SFB (Selective Fuse Breaking) Technology, protective coating and integrated decoupling MOSFET, input: 1-phase, output: 24 V DC / 40 A
QUINT4-PS/1AC/24DC/10/CO - Power supply unit
2904625
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, NFC interface, and protective coating, input: 1-phase, output: 24 V DC / 10 A
QUINT4-PS/1AC/5DC/5/PT - Power supply unit
2904595
Primary-switched power supply unit QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 5 V DC / 5 A
QUINT4-PS/1AC/24DC/1.3/PT - Power supply unit
2909575
Primary-switched power supply unit QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 1.3 A
QUINT-PS/1AC/12DC/20 - Power supply unit
2866721
Primary-switched power supply unit QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 12 V DC / 20 A
QUINT4-PS/1AC/24DC/10/+ - Power supply unit
2904616
Primary-switched QUINT POWER supply for DIN rail mounting, with selectable output characteristic curve and SFB (Selective Fuse Breaking) Technology, protective coating and integrated decoupling MOSFET, input: 1-phase, output: 24 V DC / 10 A
QUINT4-PS/1AC/48DC/5 - Power supply unit
2904610
Primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (Selective Fuse Breaking) technology, input: 1-phase, output: 48 V DC / 5 A
QUINT4-PS/1AC/12DC/7.5/PT - Power supply unit
2904607
Primary-switched power supply unit QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 12 V DC / 7.5 A
UTA 107/30 - Mounting adapter
2320089
Universal DIN rail adapter
QUINT-PS/3AC/24DC/20/CO - Power supply, with protective coating
2320924
Primary-switched power supply unit QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 3-phase, output: 24 V DC / 20 A
QUINT4-PS/1AC/48DC/10/CO - Power supply unit
2904626
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, NFC interface, and protective coating, input: 1-phase, output: 48 V DC / 10 A
QUINT4-PS/3AC/24DC/40/IOL - Power supply unit
1151047
Primary-switched power supply unit QUINT POWER, Screw connection, DIN rail mounting, input: 3-phase, output: 24 V DC / 40 A
UWA 130 - Mounting adapter
2901664
2-piece universal wall adapter for securely mounting the device in the event of strong vibrations. The profiles that are screwed onto the side of the device are screwed directly onto the mounting surface. The universal wall adapter is attached on the left/right.
QUINT4-PS/1AC/24DC/3.8/PT - Power supply unit
2909577
Primary-switched power supply unit QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 3.8 A
QUINT4-PS/3AC/48DC/20 - Power supply unit
2904627
QUINT POWER primary-switched power supply with free choice of output characteristic curve, SFB (Selective Fuse Breaking) Technology, and NFC interface, input: 3-phase, output: 48 V DC/20 A
UWA 182/52 - Mounting adapter
2938235
Universal wall adapter for securely mounting the device in the event of strong vibrations. The device is screwed directly onto the mounting surface. The universal wall adapter is attached on the top/bottom.
QUINT4-PS/3AC/24DC/20/IOL - Power supply unit
1151048
Primary-switched power supply unit QUINT POWER, Screw connection, DIN rail mounting, input: 3-phase, output: 24 V DC / 20 A