Trang chủ » Automation » Cấp nguồn | Power supply » Bộ nguồn | Power Supply Units

Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/ 2.5 - 2866268 | 1P 24VDC 2.5A

3,505

Nhà sản xuất:

Phoenix Contact

;

Xuất xứ: Germany

Giá sỉ:

Giá tốt nhất xem...0909186879 dienelectrics@gmail.com

Khuyến mãi:có discount

Thanh toán:C.O.D

Vận chuyển:Miễn phí Tp.HCM

Thông tin nổi bật

- Tiêu chuẩn IP20, RoHS
- Kích thước: (W)32 x (H)130 x (D)115mm
- Trọng lượng: 0.5kg
- Input: 85V...264V 1 AC; Output: 24V DC, 10A, 60W
- Hiệu suất sử dụng năng lượng: 86%
- Gắn trực tiếp DIN rail, bằng vít ...

THÔNG TIN THAM KHẢO

Phoenix Contact TRIO-PS/1AC/24DC/ 2.5 - 2866268 là Bộ nguồn 1AC 24VDC 2.5A

Output: 24VDC, 2.5A, metal housing

Input AC: 85VAC - 264VDC, vỏ kim loại

* Sản xuất tại Đức

- Tài liệu kỹ thuật Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/ 2.5 - 2866268 ở đây.

Ưu điểm của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/ 2.5 - 2866268

- Use the third negative terminal block as a grounding terminal block and minimize installation costs

- Maximum operational reliability thanks to high MTBF (mean time between failures) of more than 500,000 hours and high dielectric strength of up to 300 V AC

- Rugged design with metal housing and wide temperature range from -25 to +70°C

- Compensation of voltage drops by means of output voltage that can be adjusted on the front

Dimensions của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/ 2.5 - 2866268

Width	32 mm
Height	130 mm
Depth	115 mm

Ambient conditions của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/ 2.5 - 2866268

Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (> 55° C derating : 2.5%/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Climatic class	3K3 (in acc. with EN 60721)
Degree of pollution	2

Input data của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/ 2.5 - 2866268

Nominal input voltage range	100 V AC ... 240 V AC
Input voltage range	85 V AC ... 264 V AC (Derating < 90 V AC: 2,5 % / V)
Dielectric strength maximum	300 V AC
AC frequency range	45 Hz ... 65 Hz
Discharge current to PE	< 3.5 mA
Current consumption	0.95 A (120 V AC)
	0.5 A (230 V AC)
Nominal power consumption	11 W
Inrush surge current	< 15 A
Power failure bypass	> 20 ms (120 V AC)
	> 100 ms (230 V AC)
Input fuse	2 A (slow-blow, internal)
Choice of suitable circuit breakers	6 A ... 16 A (Characteristics B, C, D, K)
Power factor (cos phi)	0.72
Type of protection	Transient surge protection
Protective circuit/component	Varistor

Output data của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/ 2.5 - 2866268

Nominal output voltage	24 V DC ±1 %
Setting range of the output voltage (U_Set)	22.5 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (I_N)	2.5 A (U_OUT = 24 V DC)
Derating	55 °C ... 70 °C (2.5%/K)
Connection in parallel	Yes, for redundancy and increased capacity
Connection in series	yes
Feedback resistance	35 V DC
Circuit breaker against surge voltage at output by invasive foreign matter	< 35 V DC
Max. capacitive load	Unlimited
Active current limitation	Approx. 5 A (for short-circuit)
Control deviation	< 1 % (change in load, static 10 % ... 90 %)
	< 2 % (change in load, dynamic 10 % ... 90 %)
	< 0.1 % (change in input voltage ±10 %)
Residual ripple	< 30 mV_PP
Output power	60 W
Typical response time	< 1 s
Peak switching voltages nominal load	< 20 mV_PP
Maximum power dissipation in no-load condition	0.8 W
Power loss nominal load max.	10 W

General của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/ 2.5 - 2866268

Net weight	0.5 kg
Operating voltage display	Green LED
Efficiency	86 % (for 230 V AC and nominal values)
Insulation voltage input/output	4 kV AC (type test)
	2 kV AC (routine test)
Insulation voltage input / PE	2 kV AC (type test)
	2 kV AC (routine test)
Insulation voltage output / PE	500 V DC (type test)
Protection class	I (with PE connection)
Degree of protection	IP20
MTBF (IEC 61709, SN 29500)	> 2054000 h
Mounting position	horizontal DIN rail NS 35, EN 60715
Assembly instructions	Can be aligned: Horizontally 0 mm, vertically 50 mm

Connection data, input của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/ 2.5 - 2866268

Connection method	Screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	14
Stripping length	9 mm
Screw thread	M2,5

Connection data, output của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/ 2.5 - 2866268

Connection method	Screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	14
Stripping length	9 mm
Screw thread	M2,5

Signaling của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/ 2.5 - 2866268

Status display	"DC OK" LED green
Note on status display	U_OUT > 21.5 V: LED lights up

Standards and Regulations của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/ 2.5 - 2866268

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Noise immunity	EN 61000-6-2:2005
Connection in acc. with standard	CUL
Standards/regulations	EN 61000-4-2
Contact discharge	4 kV (Test Level 2)
Standards/regulations	EN 61000-4-3
Frequency range	80 MHz ... 1 GHz
Test field strength	10 V/m
Frequency range	1.4 GHz ... 2 GHz
Test field strength	3 V/m
Standards/regulations	EN 61000-4-4
Comments	Criterion B
Standards/regulations	EN 61000-4-5
	EN 61000-6-3
	EN 61000-4-6
Frequency range	0.15 MHz ... 80 MHz
Voltage	10 V (Test Level 3)
Standards/regulations	EN 61000-4-11
Low Voltage Directive	Conformance with LV directive 2006/95/EC
Standard - Electrical safety	EN 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations	EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage	EN 60950-1 (SELV)
	EN 60204 (PELV)
Standard - Safe isolation	DIN VDE 0100-410
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment	EN 50178
Standard – Limitation of mains harmonic currents	EN 61000-3-2
Shipbuilding approval	DNV GL (EMC A)
UL approvals	UL/C-UL listed UL 508
	UL/C-UL Recognized UL 60950-1
Shock	15g in all directions in acc. with IEC 60068-2-27
Vibration (operation)	< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
	15 Hz ... 150 Hz, 2.3g, 90 min.