Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466 | 1AC 24-48VDC 5A

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Video về Tìm hiểu chi tiết dòng sản phẩm Bộ nguồn LOGO Power của Siemens

• 

  Các model Cấp nguồn và phụ kiện của AB Allen-Bradley | Rockwell Automation Power supplies and accessories

• Xem thêm

Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466 là Bộ nguồn UNO2 1AC 24...48VDC 5A

Bộ cấp nguồn chuyển mạch chính, UNO POWER, Kết nối vít, Lắp thanh ray DIN, đầu vào: 1 pha, đầu ra: 24 V DC / 5 A, Có thể điều chỉnh từ 24 V DC ... 28 V DC

 

Technical data của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

Input data của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

AC operation
Supply system configuration	Star network (TN, TT, IT (PE))
Nominal input voltage range	100 V AC ... 240 V AC
Input voltage range	100 V AC ... 240 V AC -15 % ... +10 %
Derating	< 100 V AC (1 %/V)
Typical national grid voltage	120 V AC
	230 V AC
Voltage type of supply voltage	AC
Inrush current	typ. 35 A (at 25 °C)
Inrush current integral (I2t)	< 0.7 A2s
Frequency range (fN)	50 Hz ... 60 Hz ±10 %
Mains buffering time	typ. 25 ms (120 V AC)
	typ. 25 ms (230 V AC)
Current consumption	1.34 A (100 V AC)
	1.1 A (120 V AC)
	0.59 A (230 V AC)
	0.57 A (240 V AC)
Protective circuit	Transient surge protection; Varistor
Switch-on time	typ. 1 s
Device mains fuse	3.15 A internal (device protection), fast-blow
Recommended breaker for input protection	6 A ... 16 A (Characteristic B, C, D, K or comparable)
Discharge current to PE	< 0.25 mA

 

Output data của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

Efficiency	typ. 93 % (120 V AC)
	typ. 94 % (230 V AC)
Nominal output voltage	24 V DC
Setting range of the output voltage (USet)	24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN)	5 A
Short-circuit-proof	yes
No-load proof	yes
Crest factor	typ. 1.93 (120 V AC)
	typ. 2.05 (230 V AC)
Output power (PN)	120 W
Connection in parallel	yes, for increasing power and redundancy with diode
Connection in series	yes, for increased output voltage
Feedback voltage resistance	≤ 35 V DC
Protection against overvoltage at the output (OVP)	≤ 35 V DC
Residual ripple	typ. 70 mVPP (with nominal values)
Control deviation	< 1 % (change in load, static 10 % ... 90 %)
	< 3 % (change in load, dynamic 10 % ... 90 %)
	< 0.1 % (change in input voltage ±10 %)
Rise time	< 1 s (UOut = 10 % ... 90 %)
Minimum no-load power dissipation	< 0.4 W (120 V AC)
Maximum no-load power dissipation	< 0.75 W (230 V AC)
Minimum nominal load power dissipation	< 9 W (120 V AC)
Power loss nominal load max.	< 7.5 W (230 V AC)
Signal relay 13/14
Connection level	3.x
Connection labeling	3.1 (13), 3.2 (14)
Switch contact (floating)	OptoMOS
Switching voltage	max. 30 V AC/DC
	max. 60 V DC
Current carrying capacity	max. 50 mA
State condition	DC OK (UOut > 0,9 x UN) (Contact closed)
	UOUT < 0,9 x UN (Contact open)

 

Connection data của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

Input
Position	1.x
Identification	1.1 (L), 1.2 (N)
Conductor connection
Connection method	Screw connection
rigid	0.2 mm² ... 2.5 mm²
flexible	0.2 mm² ... 2.5 mm²
flexible with ferrule without plastic sleeve	0.25 mm² ... 2.5 mm²
flexible with ferrule with plastic sleeve	0.25 mm² ... 2.5 mm²
rigid (AWG)	24 ... 14 (Cu)
Stripping length	8 mm
Tightening torque	0.5 Nm ... 0.6 Nm
	4 lbf-in. ... 5 lbf-in.
Drive form screw head	Slotted L
Output
Position	2.x
Identification	2.1 (+), 2.2 (-)
Conductor connection
Connection method	Screw connection
rigid	0.2 mm² ... 2.5 mm²
flexible	0.2 mm² ... 2.5 mm²
flexible with ferrule without plastic sleeve	0.25 mm² ... 2.5 mm²
flexible with ferrule with plastic sleeve	0.25 mm² ... 2.5 mm²
rigid (AWG)	24 ... 14 (Cu)
Stripping length	8 mm
Tightening torque	0.5 Nm ... 0.6 Nm
	4 lbf-in. ... 5 lbf-in.
Drive form screw head	Slotted L
Signal
Position	3.x
Identification	3.1 (13), 3.2 (14)
Conductor connection
Connection method	Screw connection
rigid	0.2 mm² ... 2.5 mm²
flexible	0.2 mm² ... 2.5 mm²
flexible with ferrule without plastic sleeve	0.25 mm² ... 2.5 mm²
flexible with ferrule with plastic sleeve	0.25 mm² ... 2.5 mm²
rigid (AWG)	24 ... 14 (Cu)
Stripping length	8 mm
Tightening torque	0.5 Nm ... 0.6 Nm
	4 lbf-in. ... 5 lbf-in.
Drive form screw head	Slotted L

 

Signaling của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

LED signaling
Types of signaling	LED DC OK – signal state operation (UN = 24 V DC, IOut = IN)
Function	Visual operating state display
Color	green
LED off	Supply voltage input AC not present (Off)
LED on (green), DC OK	UOUT > 0,9 x UN (On (green), DC OK)

 

Electrical properties của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

Number of phases	1.00
Insulation voltage input/output	4 kV AC (type test)
	3.75 kV AC (routine test)

 

Product properties của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

Product type	Power supply
Product family	UNO POWER
MTBF (IEC 61709, SN 29500)	> 1442000 h (25 °C)
	> 813000 h (40 °C)
	> 428000 h (55 °C)
Environmental protection directive	RoHS Directive 2011/65/EU
	WEEE
	Reach
Insulation characteristics
Protection class	II
Degree of pollution	2

 

Dimensions của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

Item dimensions
Width	35 mm
Height	130 mm
Depth	129 mm
	125 mm (Device depth (DIN rail mounting))
Installation dimensions
Installation distance right/left (active, passive)	0 mm / 0 mm (POut ≥50% )
Installation distance top/bottom (active, passive)	30 mm / 30 mm (POut ≥50% )

 

Mounting của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

Mounting type	DIN rail mounting
Assembly instructions	alignable: 0 mm horizontally, 30 mm vertically
Mounting position	horizontal DIN rail NS 35, EN 60715
With protective coating	No

 

Material specifications của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

Flammability rating according to UL 94	V0 (Housing, terminal blocks)
Housing material	Plastic
Type of housing	Polycarbonate
Foot latch material	PBT (polybutylene terephthalate)
Housing material	Polycarbonate

 

Environmental and real-life conditions của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Ambient temperature (start-up type tested)	-40 °C
Maximum altitude	≤ 4000 m (> 2000 m, Derating: 10 %/1000 m)
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Shock (operation)	18 ms, 30g, per spatial direction (IEC 60068-2-27)
Vibration (operation)	10 Hz ... 50 Hz, amplitude ±0.2 mm
	50 Hz to 150 Hz, 2.3 g, 90 min.

 

Standards and regulations của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

Overvoltage category
EN 61010-1	II (≤ 4000 m)
Overvoltage category
EN 62477-1	III (≤3000 m)
Safety of power supply units up to 1100 V (insulation distances)
Standard designation	Safety of power supply units up to 1100 V (insulation distances)
Standards/specifications	DIN EN 61558-2-16
Electrical safety
Standard designation	Electrical safety
Standards/specifications	IEC 61010-2-201 (SELV)
Electronic equipment for use in power installations
Standard designation	Equipping high voltage installations with electronic equipment
Standards/specifications	EN 50178/VDE 0160 (PELV)
Safety for measurement, control, and laboratory equipment
Standard designation	Safety for equipment for measurement, control, and laboratory use
Standards/specifications	IEC 61010-1
Protective extra-low voltage
Standard designation	Protective extra-low voltage
Standards/specifications	IEC 61010-1 (SELV)
	IEC 61010-2-201 (PELV)
Safe isolation
Standard designation	Safe isolation
Standards/specifications	IEC 61558-2-16
	IEC 61010-2-201
Limitation of harmonic line currents
Standard designation	Limitation of harmonic line currents
Standards/specifications	EN 61000-3-2
Mains voltage dips
Standard designation	Requirement of the semiconductor industry with regard to mains voltage dips
Standards/specifications	SEMI F47 - 0706 (185 V AC)

 

Approvals của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

UL
Identification	UL/C-UL Listed UL 61010-1
UL
Identification	UL/C-UL Listed UL 61010-2-201
UL
Identification	UL/C-UL Listed ANSI/UL 121201 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
SIQ
Identification	CB scheme (IEC 61010-1, IEC 61010-2-201)

 

EMC data của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Interference emission	Interference emission in accordance with EN 61000-6-3 (residential and commercial) and EN 61000-6-4 (industrial)
EMC requirements for noise immunity	EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Conducted noise emission	EN 55016
	EN 61000-6-3 (Class B)
Noise emission	EN 55016
	EN 61000-6-3 (Class B)
Harmonic currents
Standards/regulations	EN 61000-3-2
	EN 61000-3-2 (Class A)
Frequency range	0 kHz ... 2 kHz
Flicker
Standards/regulations	EN 61000-3-3
Frequency range	0 kHz ... 2 kHz
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	6 kV (Test Level 3)
Discharge in air	8 kV (Test Level 3)
Comments	Criterion A
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 1 GHz
Test field strength	10 V/m (Test Level 3)
Frequency range	1 GHz ... 6 GHz
Test field strength	10 V/m (Test Level 3)
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	4 kV (Test Level 4 - asymmetrical)
Output	2 kV (Test Level 3 - asymmetrical)
Comments	Criterion A
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Input	2 kV (Test Level 4 - symmetrical)
	4 kV (Test Level 4 - asymmetrical)
Output	1 kV (Test Level 3 - symmetrical)
	2 kV (Test Level 3 - asymmetrical)
Comments	Criterion A
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Input/Output	asymmetrical
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V (Test Level 3)
Voltage dips
Standards/regulations	EN 61000-4-11
Voltage	230 V AC
Frequency	50 Hz
Voltage dip	70 %
Number of periods	25 / 30 periods
Comments	Criterion A
Voltage dip	40 %
Number of periods	12 periods
Additional text	Test Level 2
Comments	Criterion A
Voltage dip	0 %
Number of periods	1 period
Additional text	Test Level 2
Comments	Criterion B
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.

 

Commercial data của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

Item number	1110466
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	CM15
Product key	CMPV13
GTIN	4063151024659
Weight per piece (including packing)	485 g
Weight per piece (excluding packing)	310 g
Customs tariff number	85044095
Country of origin	VN

 

Classifications của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

ECLASS

ECLASS-11.0	27040701
ECLASS-12.0	27040701
ECLASS-13.0	27040701

 

ETIM

ETIM 8.0

EC002540

 

UNSPSC

UNSPSC 21.0

39121000

 

Approvals của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

cULus Listed

Approval ID: FILE E 123528
 

EAC

Approval ID: RU S-DE.BL08.W.00764
 

EAC

Approval ID: RU S-DE.BL08.W.00764
 

cULus Listed

Approval ID: FILE E 199827
 

Environmental product compliance của Bộ nguồn Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466

REACh SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 25;
	For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

 

- Tài liệu kỹ thuật Phoenix Contact UNO2-PS/1AC/24DC/120W - 1110466 ở đây.