Pepperl Fuchs UBE1000-18GM40-SE2-V1 | Ultrasonic through-beam barrier -Cảm biến lưới chắn thu-phát vi sóng 40mm Chuyển mạch 10-30VDC 10%SS NO PNP cULus cCSAus 1xM12 4-pin

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PEPPERL-FUCHS

• 

  Các model Cảm biến khoảng cách siêu âm Baumer Ultrasonic distance sensors

• 

  Các model Baumer Ultrasonic sensors

• Xem thêm

Cảm biến lưới chắn thu-phát vi sóng Pepperl Fuchs UBE1000-18GM40-SE2-V1 | Ultrasonic through-beam barrier

(40mm Chuyển mạch 10-30VDC 10%SS NO PNP cULus  cCSAus 1xM12 4-pin)

 

Technical data UBE1000-18GM40-SE2-V1

Product description
single head system

General data
detection range		15 ... 1000mm
standard measuring plate		100mm x 100mm
converter frequency		approx. 255 kHz
Indicators/Controls
LED green		power on
LED yellow		switching state
LED red		Disturbance, object unsafe
electrical data
operating voltage		10 ... 30 V DC, ripple 10% SS
idle current		≤ 20mA
Entry
input type		1 Learning input clearance : -UB ... +1 V, object: +6 V ... + UB input impedance: > 4.7 kΩ Learning pulse: ≥ 1 s
Exit
output type		closer pnp
rated operational current		200 mA, short circuit/overload proof
voltage drop		≤ 3V
switch-on delay		< 5ms
switching frequency		≤ 100Hz
Approvals and Certificates
UL approval		cULus Listed, General Purpose
CSA approved		cCSAus Listed, General Purpose
CCC approval		Products with a maximum operating voltage of ≤36 V do not require approval and are therefore not provided with a CCC label.
Environmental conditions
ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
storage temperature		-40 ... 85 °C (-40 ... 185 °F)
mechanical data
connection type		Device connector M12 x 1, 4-pin
Degree of protection		IP67
material
	Housing	Nickel-plated brass
	converter	epoxy resin/hollow glass sphere mixture; Foam polyurethane, cover PBT
Dimensions		25g

 

classifications

system	class code
ECLASS 11.0	27272801
ECLASS 10.0.1	27272801
ECLASS 9.0	27272801
ECLASS 8.0	27272801
ECLASS 5.1	27272801
ETIM 8.0	EC001847
ETIM 7.0	EC001847
ETIM 6.0	EC001847
ETIM 5.0	EC001847
UNSPSC 12.1	41111960

- Xem chi tiết Tài liệu kỹ thuật/ Datasheet Pepperl Fuchs UBE1000-18GM40-SE2-V1 ở đây.


Tham khảo thêm các model khác cùng loại:

UBE1000-18GM40-SE2-V1

Ultrasonic through-beam barrier
Single-head system, short design, 40 mm, function display visible from all sides, switching output, series: -18GM, operating voltage: 10 ... 30 V DC, ripple 10% SS , output type: NO contact pnp, UL approval: cULus Listed, General Purpose , CSA approval: cCSAus Listed, General Purpose, CCC approval: Products with a maximum operating voltage of ≤36 V do not require approval and are therefore not provided with a CCC marking., Connection type: M12 x 1 device plug, 4-pin
 

UBE1000-18GM40A-SE2-V1

Ultrasonic through-beam barrier
Single-head system, short design, 40 mm, function display visible from all sides, switching output, series: -18GM, operating voltage: 10 ... 30 V DC, ripple 10% SS , output type: NO contact pnp, UL approval: cULus Listed, General Purpose, CSA -Approval: cCSAus Listed, General Purpose, CCC approval: Products with a maximum operating voltage of ≤36 V do not require approval and are therefore not provided with a CCC marking., Connection type: M12 x 1 device plug, 4-pin
 

UBE4000-30GM-SA2-V15

Ultrasonic through-beam barrier
Safe detection of transparent materials, high switching frequency, adjustable sensitivity, one-way operation: one-way ultrasonic barrier, detection range: 0 ... 4000 mm, transmitter-receiver distance 500 mm ... 4000 mm, series: -30GM, operating voltage: 18 ... 30 V DC, ripple 10% SS , output type: 2 switching outputs pnp, NO/NC (antivalent), UL approval: cULus Listed, General Purpose, CSA approval: cCSAus Listed, General Purpose
 

UBE800-F77-SE2-V31

Ultrasonic through-beam barrier
Ultrasonic through-beam barrier, miniature design, easily visible LEDs for power on and switching status, high switching frequency, detection range: 0 ... 800 mm distance transmitter-receiver, series: -F77, operating voltage: 20 ... 30 V DC, ripple 10 % SS ; 12 ... 20 V DC sensitivity reduced to 80%, output type: 1 switching output pnp, NO contact, UL approval: cULus Listed, Class 2 Power Source
 

UBEC300-18GH40-SE2-V1

Ultrasonic through-beam barrier
Short design, 40 mm, stainless steel housing, chemically resistant, series: -18GM, operating voltage: 10 ... 30 V DC, ripple 10% SS , output type: normally open pnp, UL approval: cULus Listed, General Purpose, CSA approval: cCSAus Listed, General Purpose, CCC approval: Products with a maximum operating voltage of ≤36 V do not require approval and are therefore not provided with a CCC label., Connection type: M12 x 1 device plug, 4-pin
 

UBE800-F77-SE0-V31

Ultrasonic through-beam barrier
Ultrasonic through-beam barrier, miniature design, easily visible LEDs for power on and switching status, high switching frequency, detection range: 0 ... 800 mm distance transmitter-receiver, series: -F77, operating voltage: 20 ... 30 V DC, ripple 10 % SS ; 12 ... 20 V DC sensitivity reduced to 80%, output type: 1 switching output E0, npn, NO contact, UL approval: cULus Listed, Class 2 Power Source
 

UBE15M-F54-H1-V1

Ultrasonic sensor, transmitter
Multi-head system, large detection range, large possible offset between transmitter and receiver, separate evaluation, detection range: 0 ... 15000 mm, transmitter - receiver aligned, series: -F54, operating voltage: 16 ... 30 V DC, ripple 10 % SS
8 V DC at lower transmission power, UL approval: cULus Listed, General Purpose, CSA approval: cCSAus Listed, General Purpose
 

UBE15M-F54-H2-V1

Ultrasonic sensor, receiver
Multi-head system, large detection range, large possible offset between transmitter and receiver, separate evaluation, detection range: 0 ... 15000 mm, transmitter - receiver aligned, series: -F54, operating voltage: 10 ... 30 V DC, ripple 10 % SS
 

UBE15M-H1

Ultrasonic sensor, transmitter
Multi-head system, large detection range, large possible offset between transmitter and receiver, one or two converters can be connected, detection range: 0 ... 15000 mm, transmitter - receiver aligned, operating voltage: 16 ... 30 V DC, ripple 10% SS
8 V DC with lower transmission power, UL approval: cULus Listed, General Purpose, CSA approval: cCSAus Listed, General Purpose
 

UBE500-18GM40A-E2-V1-Y220366

Ultrasonic sensor, receiver
Single-head system, short design, 40 mm, function display visible from all sides, switching output, series: -18GM, operating voltage: 10 ... 30 V DC, ripple 10% SS , output type: NO contact pnp, UL approval: cULus Listed, General Purpose , CSA approval: cCSAus Listed, General Purpose, CCC approval: Products with a maximum operating voltage of ≤36 V do not require approval and are therefore not provided with a CCC marking., Connection type: M12 x 1 device plug, 4-pin
 

UBE500-18GM40A-V1-Y220367

Ultrasonic sensor, transmitter
Single-head system, short design, 40 mm, function display visible from all sides, test input, series: -18GM, operating voltage: 10 ... 30 V DC, ripple 10% SS , UL approval: cULus Listed, General Purpose, CSA approval: cCSAus Listed, General Purpose, CCC approval: Products with a maximum operating voltage of ≤36 V do not require approval and are therefore not provided with a CCC label., Connection type: M12 x 1 device plug, 4-pin, housing: stainless steel V4A
 

UBE800-F77-SE3-V31

Ultrasonic through-beam barrier
Ultrasonic through-beam barrier, miniature design, easily visible LEDs for power on and switching status, high switching frequency, detection range: 0 ... 800 mm distance transmitter-receiver, series: -F77, operating voltage: 20 ... 30 V DC, ripple 10 % SS ; 12 ... 20 V DC sensitivity reduced to 80%, output type: 1 switching output pnp, normally closed, UL approval: cULus Listed, Class 2 Power Source
 

UBEC300-18GH40-SE2-2M-Y274491

Ultrasonic through-beam barrier
Chemically highly resistant, short design, 40 mm, stainless steel housing, series: -18GM, operating voltage: 10 ... 30 V DC, ripple 10% SS , output type: normally open pnp, UL approval: cULus Listed, General Purpose, CSA approval: cCSAus Listed, General Purpose, CCC approval: Products with a maximum operating voltage of ≤36 V do not require approval and are therefore not provided with a CCC mark., Connection: cable, PTFE-coated, length 2 m
 

UBE1000-18GM40A-SE2-V1-Y205349

Ultrasonic through-beam barrier
Single-head system, short design, 40 mm, function display visible from all sides, switching output, series: -18GM, operating voltage: 10 ... 30 V DC, ripple 10% SS , output type: NO contact pnp, UL approval: cULus Listed, General Purpose , CSA approval: cCSAus Listed, General Purpose, CCC approval: Products with a maximum operating voltage of ≤36 V do not require approval and are therefore not provided with a CCC marking., Connection type: M12 x 1 device plug, 4-pin
 

UBE800-F77-SE1-V31

Ultrasonic through-beam barrier
Ultrasonic through-beam barrier, miniature design, easily visible LEDs for power on and switching status, high switching frequency, detection range: 0 ... 800 mm distance transmitter-receiver, series: -F77, operating voltage: 20 ... 30 V DC, ripple 10 % SS ; 12 ... 20 V DC sensitivity reduced to 80%, output type: 1 switching output E1, npn, normally closed, UL approval: cULus Listed, Class 2 Power Source