Pepperl Fuchs UC4000-L2-I-V15 | 277770 | Ultrasonic sensor -Cảm biến siêu âm 200-4000mm 10-30VDC 4-20MA 5-Pin M12

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PEPPERL-FUCHS

• 

  Các model Cảm biến khoảng cách siêu âm Baumer Ultrasonic distance sensors

• 

  Các model Baumer Ultrasonic sensors

• Xem thêm

Cảm biến siêu âm Pepperl Fuchs UC4000-L2-I-V15 | 277770 | Ultrasonic sensor

(200-4000mm 10-30VDC 4-20MA 5-Pin M12)

 

Datasheet excerpt: Technical data of  UC4000-L2-I-V15

Product Description
Single head system

General specifications
Sensing range		200 ... 4000 mm
Adjustment range		240 ... 4000 mm
Dead band		0 ... 200 mm
Standard target plate		100 mm x 100 mm
Transducer frequency		approx. 85 kHz
Nominal ratings
Response delay		minimum: 110 ms factory setting: 615 ms
Time delay before availability		≤ 1600 ms
Indicators/operating means
LED green		Operating display
LED yellow		object in evaluation range
LED red		error
Electrical specifications
Operating voltage		10 ... 30 V DC , ripple 10 %SS
No-load supply current		≤ 50 mA
Interface
Interface type		Serial interface (programming adapter required) 9600 BPS, no parity, 8 data bits, 1 stop bit
Input/Output
Input/output type		1 synchronization connection, bidirectional
	0 Level	0 ... 1 V
	1 Level	4 V ... UB
	Input impedance	> 12 kΩ
	Output rated operating current	< 12 mA
	Pulse length	0.5 ... 300 ms (level 1)
	Pulse interval	≥ 62.5 ms (level 0)
Synchronization frequency
	Common mode operation	≤ 16 Hz
	Multiplex operation	≤ 17 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 )
Input
Input type		1 program input
Level (evaluation limit 1)		0 ... 1 V
Level (evaluation limit 2)		4 V ... UB
Input impedance		> 12 kΩ
Pulse length		2 ... 10 s
Output
Output type		1 analog output 4 ... 20 mA
Resolution		Evaluation range [mm]/3200, however ≥ 0.4 mm
Deviation of the characteristic curve		≤ 0.2 % of full-scale value
Repeat accuracy		≤ 0.1 % of full-scale value
Load impedance		≤ 500 Ω at UB ≥ 14V ≤ 300 Ω at UB < 14V
Temperature influence		≤ 1.5 % of full-scale value
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 EN 60947-5-7:2003 IEC 60947-5-7:2003
Approvals and certificates
UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 5-pin
Degree of protection		IP67
Material
	Housing	PA-GF35
	Transducer	epoxy resin/hollow glass sphere mixture; polyurethane foam
Mass		120 g
Factory settings
Output		evaluation limit A1: 240 mm evaluation limit A2: 4000 mm output function: rising ramp
Beam width		wide
Evaluation procedure		low-pass behavior
General information
Supplementary information		Switch settings of the external programming adapter: "output load": pull-down "output logic": noninv

 

Classifications

System	Classcode
ECLASS 11.0	27272803
ECLASS 10.0.1	27272803
ECLASS 9.0	27272803
ECLASS 8.0	27272803
ECLASS 5.1	27272803
ETIM 8.0	EC001849
ETIM 7.0	EC001849
ETIM 6.0	EC001849
ETIM 5.0	EC001849

Accessories

V15-G-2M-PVC

Female cordset single-ended M12 straight A-coded, 5-pin, PVC cable grey
 

UC-PROG1-USB

Programming adapter, USB 2.0 interface, Simple insertion in the sensor connection lead
 

UB-PROG2

Programming unit
Microsoft .NET
Connection Software
Software for connecting people, information, systems, and devices, For applications developed using .NET, Required to run PACTware