S1SD-1AI-1U.1 Pepperl+Fuchs Isolating Amplifier - Bộ khuếch đại cách li tín hiệu analog

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PEPPERL-FUCHS

• 

  Tìm hiểu về điều hòa, lọc nhiểu, khuếch đại, chuyển đổi tín hiệu điều khiển và đo lường MCR

• Xem thêm

Chi tiết thông tin đặc tính sản phẩm

S1SD-1AI-1U.1 Pepperl+Fuchs Isolating Amplifier - Bộ khuếch đại cách li tín hiệu 1-kênh 24VDC 0/2-10V 0/4-20mA/ 0/2-10V 0/4-20mA

- 1-channel signal conditioner
- 24 V DC supply
- Input signal 0/2-10V 0/4-20mA
- Output Analog signal 0/2-10V 0/4-20mA
- Accuracy 0.1 %
- Configurable by DIP switches
- Connection via screw terminals

 

Datasheet excerpt: Technical data of  S1SD-1AI-1U.1

General specifications
Signal type		Analog input
Operation time		MTBF: 536 a acc. to SN 29500 stationary continuous operating, average ambient temperature 40 °C (104 °F)
Supply
Connection		Power Bus or terminals 1-, 2+
Rated voltage		16.8 ... 31.2 V DC
Power dissipation		0.6 W
Power consumption		0.7 W
Input
Connection side		field side
Transmission range		linearity range: -1 ... 110 %
Input I
	Connection	terminals 5+, 6-
	Input signal	0/4 ... 20 mA , max. 50 mA
	Input resistance	≤ 25 Ω
Input II
	Connection	terminals 7+, 8-
	Input signal	0/2 ... 10 V , max. 30 V
	Input resistance	> 100 kΩ
Output
Connection side		control side
Connection		terminals 3-, 4+
Analog voltage output		0/2 ... 10 V , load ≥ 2 kΩ
Analog current output		0/4 ... 20 mA, load ≤ 600 Ω
Ripple		≤ 10 mV eff
Transfer characteristics
Accuracy		max. 0.1 % of full-scale value
Influence of ambient temperature		< 100 ppm/K of full-scale value
Frequency range		0 ... 10 Hz , 0 ... 100 Hz , 0 ... 5 kHz
Settling time		70 ms , 7 ms , 150 µs
Galvanic isolation
Output/power supply		safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Input/Other circuits		safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Indicators/settings
Control elements		DIP-switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529:2001
Protection against electrical shock		EN 61010-1:2010
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Damaging gas		designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Core cross-section		0.5 ... 2.5 mm2 (20 ... 14 AWG)
Mass		approx. 70 g
Dimensions		6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
Certificate		DEMKO 16 ATEX 1750X
	Marking	II 3G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-15:2010
International approvals
UL approval		E106378
IECEx approval		IECEx UL 16.0116X
	Approved for	Ex nA IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

 

- Xem chi tiết Tài liệu kỹ thuật, Hướng dẫn sử dụng/ Datasheet, Manual, Catalogue Isolating Amplifier S1SD-1AI-1U.1 Pepperl+Fuchs