Bộ nguồn Phoenix Contact QUINT-PS/1AC/24DC/20 - 2866776
Mô tả sản phẩm
- Bộ nguồn QUINT POWER với chức năng tối đa
- Bộ ngắt mạch QUINT POWER bằng từ tính và do đó ngắt nhanh với tốc độ gấp sáu lần dòng điện danh định, để bảo vệ hệ thống có chọn lọc và do đó tiết kiệm chi phí. Mức độ sẵn sàng cao của hệ thống được đảm bảo bổ sung, nhờ vào giám sát chức năng phòng ngừa, vì nó báo cáo các trạng thái hoạt động quan trọng trước khi xảy ra lỗi.
- Khởi động đáng tin cậy các tải nặng diễn ra thông qua bộ dự trữ năng lượng tĩnh POWER BOOST. Nhờ điện áp có thể điều chỉnh, tất cả các dải giữa 5 V DC ... 56 V DC đều được bao phủ.
More about this source text
Thông số kỹ thuật
Thông số đầu vào
AC operation |
Nominal input voltage range |
100 V AC ... 240 V AC |
Input voltage range |
85 V AC ... 264 V AC |
90 V DC ... 350 V DC |
Input voltage range AC |
85 V AC ... 264 V AC |
Input voltage range DC |
90 V DC ... 350 V DC |
Electric strength, max. |
300 V AC |
Voltage type of supply voltage |
AC/DC |
Inrush current |
< 20 A |
Inrush current integral (I2t) |
< 3.2 A2s |
AC frequency range |
45 Hz ... 65 Hz |
Frequency range DC |
0 Hz |
Mains buffering time |
> 32 ms (120 V AC) |
> 32 ms (230 V AC) |
Current consumption |
5.1 A (120 V AC) |
2.3 A (230 V AC) |
4.9 A (110 V DC) |
2.4 A (220 V DC) |
Nominal power consumption |
569 VA |
Protective circuit |
Transient surge protection; Varistor |
Power factor (cos phi) |
0.89 |
Typical response time |
< 0.6 s |
Input fuse |
12 A (slow-blow, internal) |
Permissible backup fuse |
B10 B16 AC: |
Permissible DC backup fuse |
DC: Connect a suitable fuse upstream |
Recommended breaker for input protection |
10 A ... 16 A (AC: Characteristics B, C, D, K) |
Discharge current to PE |
< 3.5 mA |
Thông số đầu ra
Efficiency |
> 93 % (for 230 V AC and nominal values) |
Output characteristic |
U/I |
Nominal output voltage |
24 V DC ±1 % |
Setting range of the output voltage (USet) |
18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted) |
Nominal output current (IN) |
20 A (-25 °C ... 60 °C, UOUT = 24 V DC) |
POWER BOOST (IBoost) |
26 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC ) |
Selective Fuse Breaking (ISFB) |
120 A (12 ms) |
Magnetic circuit breaker tripping |
B2 / B4 / B6 / B10 / B16 / C2 / C4 / C6 |
Derating |
60 °C ... 70 °C (2.5%/K) |
Feedback voltage resistance |
max. 35 V DC |
Protection against overvoltage at the output (OVP) |
< 35 V DC |
Control deviation |
< 1 % (change in load, static 10 % ... 90 %) |
< 2 % (change in load, dynamic 10 % ... 90 %) |
< 0.1 % (change in input voltage ±10 %) |
Residual ripple |
< 30 mVPP (with nominal values) |
Short-circuit-proof |
yes |
Output power |
480 W |
Maximum no-load power dissipation |
8 W |
Power loss nominal load max. |
40 W |
Rise time |
< 0.1 s (UOUT (10 % ... 90 %)) |
Connection in parallel |
yes, for redundancy and increased capacity |
Connection in series |
yes |
Signal: DC OK active |
Output description |
UOUT > 0.9 x UN: High signal |
Switching voltage range |
18 V DC ... 24 V DC |
Maximum inrush current |
≤ 20 mA (short-circuit-proof) |
Continuous load current |
≤ 20 mA |
Signal: DC OK floating |
Output description |
Relay contact, UOUT > 0.9 x UN: Contact closed |
Maximum switching voltage |
30 V AC |
24 V DC |
Maximum inrush current |
0.5 A |
1 A |
Continuous load current |
≤ 1 A |
Signal: POWER BOOST, active |
Output description |
IOUT < IN: High signal |
Switching voltage range |
18 V DC ... 24 V DC |
Output voltage |
+ 24 V DC |
Maximum inrush current |
20 mA (short-circuit-proof) |
Continuous load current |
≤ 20 mA |
Signal: DC OK active |
Output description |
UOUT > 0.9 x UN: High signal |
Switching voltage range |
18 V DC ... 24 V DC |
Maximum inrush current |
≤ 20 mA (short-circuit-proof) |
Continuous load current |
≤ 20 mA |
Signal: DC OK floating |
Output description |
Relay contact, UOUT > 0.9 x UN: Contact closed |
Maximum switching voltage |
30 V AC |
24 V DC |
Maximum inrush current |
0.5 A |
1 A |
Continuous load current |
≤ 1 A |
Signal: POWER BOOST, active |
Output description |
IOUT < IN: High signal |
Switching voltage range |
18 V DC ... 24 V DC |
Output voltage |
+ 24 V DC |
Maximum inrush current |
20 mA (short-circuit-proof) |
Continuous load current |
≤ 20 mA |
Signal: DC OK active |
Output description |
UOUT > 0.9 x UN: High signal |
Switching voltage range |
18 V DC ... 24 V DC |
Maximum inrush current |
≤ 20 mA (short-circuit-proof) |
Continuous load current |
≤ 20 mA |
Signal: DC OK floating |
Output description |
Relay contact, UOUT > 0.9 x UN: Contact closed |
Maximum switching voltage |
30 V AC |
24 V DC |
Maximum inrush current |
0.5 A |
1 A |
Continuous load current |
≤ 1 A |
Signal: POWER BOOST, active |
Output description |
IOUT < IN: High signal |
Switching voltage range |
18 V DC ... 24 V DC |
Output voltage |
+ 24 V DC |
Maximum inrush current |
20 mA (short-circuit-proof) |
Continuous load current |
≤ 20 mA |
Thông số kết nối
Input |
Connection method |
Screw connection |
Conductor cross section solid min. |
0.2 mm² |
Conductor cross section solid max. |
6 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
4 mm² |
Conductor cross section AWG min. |
18 |
Conductor cross section AWG max. |
10 |
Stripping length |
7 mm |
Screw thread |
M4 |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Output |
Connection method |
Screw connection |
Conductor cross section solid min. |
0.2 mm² |
Conductor cross section solid max. |
6 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
4 mm² |
Conductor cross section AWG min. |
12 |
Conductor cross section AWG max. |
10 |
Stripping length |
7 mm |
Screw thread |
M4 |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Signal |
Connection method |
Screw connection |
Conductor cross section solid min. |
0.2 mm² |
Conductor cross section solid max. |
6 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
4 mm² |
Conductor cross section AWG min. |
18 |
Conductor cross section AWG max. |
10 |
Screw thread |
M4 |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Tín hiệu đèn báo LED signaling
Types of signaling |
LED |
Active switching output |
Relay contact |
Signal output: DC OK active |
Status display |
UOUT > 0.9 x UN: "DC OK" LED green |
Note on status display |
UOUT < 0.9 x UN: Flashing "DC OK" LED |
IOUT < IN: LED ON |
Signal output: DC OK floating |
Status display |
UOUT > 0.9 x UN: "DC OK" LED green |
Note on status display |
UOUT < 0.9 x UN: Flashing "DC OK" LED |
Signal output: POWER BOOST, active |
Status display |
IOUT > IN: LED "BOOST" yellow |
Electrical properties
Number of phases |
1.00 |
Insulation voltage input/output |
4 kV AC (type test) |
2 kV AC (routine test) |
Insulation voltage output / PE |
500 V DC (routine test) |
Insulation voltage input / PE |
3.5 kV AC (type test) |
2 kV AC (routine test) |
Thuộc tính sản phẩm
Product type |
Power supply |
MTBF (IEC 61709, SN 29500) |
> 900000 h (25 °C) |
> 520000 h (40 °C) |
> 235000 h (60 °C) |
Insulation characteristics |
Protection class |
I |
Degree of pollution |
2 |
Kích thước
Width |
90 mm |
Height |
130 mm |
Depth |
125 mm |
Alternative assembly |
Width |
122 mm |
Height |
130 mm |
Depth |
93 mm |
Lắp đặt
Mounting type |
DIN rail mounting |
Assembly instructions |
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically
alignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom |
Mounting position |
horizontal DIN rail NS 35, EN 60715 |
With protective coating |
No |
Thông số vật liệu
Housing material |
Metal |
Hood version |
Galvanized sheet steel, free from chrome (VI) |
Side element version |
Aluminum |
Điều kiện vận hành
Ambient conditions
|
Degree of protection |
IP20 |
Ambient temperature (operation) |
-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) |
Ambient temperature (storage/transport) |
-40 °C ... 85 °C |
Ambient temperature (start-up type tested) |
-40 °C |
Maximum altitude |
6000 m |
Climatic class |
3K3 (in acc. with EN 60721) |
Max. permissible relative humidity (operation) |
≤ 95 % (at 25 °C, non-condensing) |
Shock |
18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) |
< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
15 Hz ... 150 Hz, 2.3g, 90 min. |
Quy chuẩn
Rail applications |
EN 50121-4 |
EN 50121-3-2 |
HART FSK Physical Layer Test Specification Compliance |
Output voltage UOut compliant |
Standard – Limitation of mains harmonic currents |
EN 61000-3-2 |
Standard - Electrical safety |
IEC 61010-2-201 (SELV) |
Standard - Equipment safety |
BG (design tested) |
Standard - Approval for medical use |
IEC 60601-1, 2 x MOOP |
Standard – Safety extra-low voltage |
IEC 61010-1 (SELV) |
IEC 61010-2-201 (PELV) |
Standard - Safe isolation |
IEC 61010-2-201 |
Standard - safety for equipment for measurement, control, and laboratory use |
IEC 61010-1 |
Approval - requirement of the semiconductor industry with regard to mains voltage dips |
SEMI F47-0706 Compliance Certificate |
Overvoltage category |
EN 62477-1 |
III |
Approval data
CSA |
CAN/CSA-C22.2 No. 60950-1-07 |
CSA-C22.2 No. 107.1-01 |
Shipbuilding approval |
DNV GL (EMC B, only with upstream filter), ABS, LR, RINA, NK, BV |
SIQ |
BG (type approved) |
UL approvals |
UL Listed UL 508 |
UL/C-UL Recognized UL 60950-1 |
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
Thông số điện EMC
Low Voltage Directive |
Conformance with Low Voltage Directive 2014/35/EC |
Electromagnetic compatibility |
Conformance with EMC Directive 2014/30/EU |
EMC requirements for noise emission |
EN 61000-6-3 |
EN 61000-6-4 |
EMC requirements for noise immunity |
EN 61000-6-1 |
EN 61000-6-2 |
Noise emission |
EN 55011 (EN 55022) |
Noise immunity |
EN 61000-6-2 |
Electrostatic discharge |
Standards/regulations |
EN 61000-4-2 |
Electrostatic discharge |
Contact discharge |
8 kV (Test Level 4) |
Discharge in air |
15 kV (Test Level 4) |
Comments |
Criterion A |
Electromagnetic HF field |
Standards/regulations |
EN 61000-4-3 |
Electromagnetic HF field |
Frequency range |
80 MHz ... 1 GHz |
Test field strength |
20 V/m (Test Level 3) |
Frequency range |
1 GHz ... 2 GHz |
Test field strength |
10 V/m (Test Level 3) |
Frequency range |
2 GHz ... 3 GHz |
Test field strength |
10 V/m (Test Level 3) |
Comments |
Criterion A |
Fast transients (burst) |
Standards/regulations |
EN 61000-4-4 |
Fast transients (burst) |
Input |
4 kV (Test Level 4 - asymmetrical) |
Output |
2 kV (Test Level 3 - asymmetrical) |
Signal |
2 kV (Test Level 4 - asymmetrical) |
Comments |
Criterion A |
Surge voltage load (surge) |
Standards/regulations |
EN 61000-4-5 |
Input |
2 kV (Test Level 3 - symmetrical) |
4 kV (Test Level 4 - asymmetrical) |
Output |
1 kV (Test Level 2 - symmetrical) |
2 kV (Test Level 3 - asymmetrical) |
Signal |
1 kV (Test Level 2 - asymmetrical) |
Comments |
Criterion A |
Conducted interference |
Standards/regulations |
EN 61000-4-6 |
Conducted interference |
I/O/S |
asymmetrical |
Frequency range |
0.15 MHz ... 80 MHz |
Comments |
Criterion A |
Voltage |
10 V (Test Level 3) |
Emitted interference |
Standards/regulations |
EN 61000-6-3 |
Radio interference voltage in acc. with EN 55011 |
EN 55011 (EN 55022) Class B, area of application: Industry and residential |
Emitted radio interference in acc. with EN 55011 |
EN 55011 (EN 55022) Class B, area of application: Industry and residential |
Criterion A |
Normal operating behavior within the specified limits. |
Criterion B |
Temporary impairment to operational behavior that is corrected by the device itself. |
Thông số thương mại
Item number |
2866776 |
Packing unit |
1 pc |
Minimum order quantity |
1 pc |
Product Key |
CMPQ13 |
Catalog Page |
Page 159 (C-6-2015) |
GTIN |
4046356113557 |
Weight per Piece (including packing) |
2,103 g |
Weight per Piece (excluding packing) |
1,608 g |
Customs tariff number |
85044030 |
Country of origin |
TH |
- Tài liệu kỹ thuật (Datasheet) Phoenix Contact QUINT-PS/1AC/24DC/20 - 2866776
ở đây.
Tham khảo thêm các model khác cùng loại:
QUINT-PS/1AC/24DC/10 - 2866763
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 10 A
QUINT-PS/1AC/24DC/40 - 2866789
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 40 A
QUINT-PS/1AC/24DC/ 3.5 - 2866747
Primary-switched power supply unit, QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 3.5 A
QUINT-PS/3AC/24DC/40 - 2866802
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 3-phase, output: 24 V DC / 40 A
QUINT4-PS/3AC/24DC/40/IOL - 1151047
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, input: 3-phase, output: 24 V DC / 40 A
QUINT-PS/1AC/48DC/20 - 2866695
Primary-switched power supply unit, QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 48 V DC / 20 A
QUINT-PS/1AC/24DC/10/CO - 2320911
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 10 A
QUINT-PS/1AC/12DC/20 - 2866721
Primary-switched power supply unit, QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 12 V DC / 20 A
QUINT-PS/1AC/24DC/20/CO - 2320898
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 20 A
QUINT-PS/3AC/24DC/20/CO - 2320924
Primary-switched power supply unit, QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 3-phase, output: 24 V DC / 20 A
QUINT-PS/1AC/24DC/ 5/CO - 2320908
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 5 A
QUINT4-PS/3AC/24DC/20/IOL - 1151048
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, input: 3-phase, output: 24 V DC / 20 A
QUINT4-PS/1AC/110DC/4 - 2904613
Primary-switched power supply unit, QUINT POWER, Screw connection, input: 1-phase, output: 110 V DC / 4 A
QUINT-PS/3AC/48DC/20 - 2320827
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 3-phase, output: 48 V DC / 20 A
QUINT4-PS/1AC/2X15DC/2/PT - 2904596
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 15 V / 2 A
QUINT4-PS/1AC/24DC/2.5/SC - 2904598
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 2.5 A
QUINT4-PS/1AC/24DC/1.3/SC - 2904597
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 1.3 A
QUINT4-PS/1AC/24DC/3.8/SC - 2904599
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 3.8 A
QUINT4-PS/1AC/24DC/3.8/PT - 2909577
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 3.8 A
QUINT4-PS/1AC/12DC/2.5/PT - 2904605
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 12 V DC / 2.5 A
QUINT4-PS/1AC/5DC/5/PT - 2904595
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 5 V DC / 5 A
QUINT4-PS/1AC/24DC/2.5/PT - 2909576
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 2.5 A
QUINT4-PS/1AC/24DC/1.3/PT - 2909575
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 1.3 A
UPS-BAT-KIT/PB/2X12V/4AH - 1283116
Replacement battery, VRLA-AGM, 2x12 V DC, 4 Ah. Only for 1274117 UPS-BAT/PB/24DC/4AH, 2320267 QUINT-UPS/24DC/24DC/10/3.4AH from V/C 06, 2905908 TRIO-UPS-2G/1AC/1AC/120V/750VA, and 2905909 TRIO-UPS-2G/1AC/1AC/230V/750VA
UPS-BAT-KIT/PB/2X12V/1.2AH - 1283114
Replacement battery, VRLA-AGM, 2x12 V DC, 1.2 Ah. Only for 1274520 UPS-BAT/PB/24DC/1.2AH and 2320254 QUINT-UPS/24DC/24DC/5/1.3AH from V/C 05
QUINT4-PS/1AC/12DC/7.5/PT - 2904607
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 12 V DC / 7.5 A
QUINT4-SYS-PS/1AC/24DC/2.5/SC - 2904614
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 2.5 A
QUINT-PS/FAN/4 - 2320076
The fan for QUINT-PS/1AC and .../3AC can be mounted without the need for tools or other accessories. By using the fan, optimum cooling is ensured at high ambient temperatures or if the mounting position is rotated.
QUINT4-PS/3AC/48DC/20 - 2904627
QUINT POWER primary-switched power supply with free choice of output characteristic curve, SFB (Selective Fuse Breaking) Technology, and NFC interface, input: 3-phase, output: 48 V DC/20 A
QUINT4-PS/1AC/48DC/20 - 2904612
QUINT POWER primary-switched power supply with free choice of output characteristic curve, SFB (Selective Fuse Breaking) Technology, and NFC interface, input: 1-phase, output: 48 V DC/20 A
QUINT4-PS/1AC/24DC/20 - 2904602
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/20 A
QUINT4-PS/1AC/24DC/10 - 2904601
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/10 A
QUINT4-PS/1AC/24DC/5 - 2904600
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/5 A
QUINT4-PS/1AC/24DC/10/+ - 2904616
Primary-switched QUINT POWER supply for DIN rail mounting, with selectable output characteristic curve and SFB (Selective Fuse Breaking) Technology, protective coating and integrated decoupling MOSFET, input: 1-phase, output: 24 V DC / 10 A
QUINT4-PS/1AC/24DC/40 - 2904603
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/40 A
QUINT4-PS/3AC/24DC/40 - 2904623
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/40 A
QUINT4-PS/3AC/24DC/20 - 2904622
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/20 A
QUINT4-PS/3AC/24DC/10 - 2904621
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/10 A
QUINT4-PS/1AC/12DC/15 - 2904608
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (Selective Fuse Breaking) Technology, and NFC interface, input: 1-phase, output: 12 V DC / 15 A
QUINT4-PS/3AC/24DC/5 - 2904620
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/5 A
QUINT4-PS/1AC/24DC/20/+ - 2904617
Primary-switched QUINT POWER supply for DIN rail mounting, with selectable output characteristic curve and SFB Technology (selective fuse breaking), protective coating and integrated decoupling MOSFET, input: 1-phase, output: 24 V DC / 20 A
QUINT4-PS/1AC/48DC/10 - 2904611
Primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (Selective Fuse Breaking) technology, input: 1-phase, output: 48 V DC / 10 A
QUINT4-PS/1AC/48DC/10/CO - 2904626
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, NFC interface, and protective coating, input: 1-phase, output: 48 V DC / 10 A
QUINT4-PS/1AC/48DC/5 - 2904610
Primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (Selective Fuse Breaking) technology, input: 1-phase, output: 48 V DC / 5 A
QUINT4-PS/1AC/24DC/10/CO - 2904625
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, NFC interface, and protective coating, input: 1-phase, output: 24 V DC / 10 A
QUINT4-UPS/24DC/24DC/10 - 2907066
QUINT UPS with IQ Technology, for DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A
QUINT4-UPS/24DC/24DC/20 - 2907071
QUINT UPS with IQ Technology, for DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A
QUINT4-UPS/24DC/24DC/5 - 2906990
QUINT UPS with IQ Technology, for DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A
QUINT4-UPS/24DC/24DC/40 - 2907077
QUINT UPS with IQ Technology, for DIN rail mounting, input: 24 V DC, output: 24 V DC / 40 A, charging current: 5 A
QUINT4-UPS/24DC/24DC/10/USB - 2907067
QUINT UPS with IQ Technology, USB communication interface (Modbus/RTU), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A
QUINT4-UPS/1AC/1AC/1KVA - 2320283
Uninterruptible power supply with IQ technology for DIN rail mounting. Input: 120/230 V AC, output: 120/230 V AC/1 kVA. Provides information regarding the state of charge, remaining runtime, and service life of the rechargeable battery module at any time, thereby increasing system availability.
QUINT4-UPS/24DC/24DC/20/PN - 2907073
QUINT UPS with IQ Technology, RJ45 communication interfaces (PROFINET), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A
QUINT4-UPS/1AC/1AC/500VA/USB - 1067327
QUINT USV, IQ Technology, DIN rail mounting, input:120 V AC / 230 V AC, output:120 V AC / 230 V AC / 500 VA.
QUINT4-UPS/24DC/24DC/5/USB - 2906991
QUINT UPS with IQ Technology, USB communication interface (Modbus/RTU), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A
QUINT4-UPS/24DC/24DC/40/USB - 2907078
QUINT UPS with IQ Technology, USB communication interface (Modbus/RTU), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 40 A, charging current: 5 A
QUINT4-UPS/24DC/24DC/20/USB - 2907072
QUINT UPS with IQ Technology, USB communication interface (Modbus/RTU), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A
QUINT4-UPS/24DC/24DC/10/PN - 2907068
QUINT UPS with IQ Technology, RJ45 communication interfaces (PROFINET), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A
QUINT4-UPS/24DC/24DC/40/EIP - 2907080
QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherNet/IP™), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 40 A, charging current: 5 A
QUINT4-UPS/24DC/24DC/10/EIP - 2907069
QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherNet/IP™), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A
QUINT4-UPS/24DC/24DC/5/EIP - 2906994
QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherNet/IP™), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A
QUINT4-UPS/24DC/24DC/40/EC - 2907081
QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherCAT®), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 40 A, charging current: 5 A
QUINT4-UPS/24DC/24DC/20/EC - 2907076
QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherCAT®), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A
QUINT4-UPS/24DC/24DC/20/EIP - 2907074
QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherNet/IP™), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A
QUINT4-UPS/24DC/24DC/10/EC - 2907070
QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherCAT®), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A
QUINT4-UPS/24DC/24DC/40/PN - 2907079
QUINT UPS with IQ Technology, RJ45 communication interfaces (PROFINET), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 40 A, charging current: 5 A
QUINT4-UPS/24DC/24DC/5/EC - 2906996
QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherCAT®), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A
QUINT4-UPS/24DC/24DC/5/PN - 2906993
QUINT UPS with IQ Technology, RJ45 communication interfaces (PROFINET), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A
QUINT-UPS/ 24DC/ 24DC/10/3.4AH - 2320267
Uninterruptible energy supply with IQ technology and integrated energy storage for DIN rail mounting, input 24 V DC, output: 24 V DC / 10 A, energy storage: lead AGM 4 Ah, incl. mounted UTA 107/30 universal DIN rail adapter
QUINT4-DIODE/12-24DC/2X20/1X40 - 2907719
DIN rail diode module 12-24 V DC/2x20 A or 1x40 A. Uniform redundancy up to the consumer.
QUINT-UPS/ 24DC/ 24DC/ 5/1.3AH - 2320254
Uninterruptible energy supply with IQ technology and integrated energy storage for DIN rail mounting, input 24 V DC, output: 24 V DC / 5 A, energy storage: lead AGM 1.2 Ah, incl. mounted UTA 107/30 universal DIN rail adapter
QUINT-PS/2AC/1DC/24DC/20 - 2320830
Primary-switched DIN rail power supply unit. AC input: suitable for operation between two phases (400 V AC). DC input: suitable for operation in an FI intermediate circuit. Output: 24 V DC/20 A.
QUINT-DIODE/12-24DC/2X20/1X40 - 2320157
DIN rail diode module 12-24 V DC/2x20 A or 1x40 A. Uniform redundancy up to the consumer.
QUINT-UPS/ 24DC/ 24DC/20 - 2320238
Uninterruptible power supply with IQ technology for DIN rail mounting, input: 24 V DC, output: 24 V DC/20 A, including mounted universal DIN rail adapter UTA 107/30
QUINT-PS/1AC/24DC/20 - 2866776
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 20 A
QUINT-PS/1AC/24DC/ 5 - 2866750
Primary-switched power supply unit, QUINT POWER, Pluggable screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 5 A
QUINT-ORING/24DC/2X20/1X40 - 2320186
Active QUINT redundancy module for DIN rail mounting with ACB (Auto Current Balancing) Technology and monitoring functions, input: 24 V DC/2x 20 A, output: 24 V DC/1 x 40 A, including mounted UTA 107/30 universal DIN rail adapter
QUINT-ORING/24DC/2X10/1X20 - 2320173
Active QUINT redundancy module for DIN rail mounting with Auto Current Balancing ACB technology and monitoring functions, input: 24 V DC, output: 24 V DC/2 x 10 A or 1 x 20 A, including mounted UTA 107/30 universal DIN rail adapter
QUINT-PS/3AC/24DC/20 - 2866792
Primary-switched power supply unit, QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 3-phase, output: 24 V DC / 20 A
QUINT-ORING/24DC/2X40/1X80 - 2902879
Active QUINT redundancy module for DIN rail mounting with ACB (Auto Current Balancing) Technology and monitoring functions, input: 24 V DC/2x 40 A, output: 24 V DC/1 x 80 A, including mounted UTA 107/30 universal DIN rail adapter
QUINT-DIODE/48DC/2X20/1X40 - 2320160
DIN rail diode module 48 V DC/2x20 A or 1x40 A. Uniform redundancy up to the consumer.
QUINT-UPS/ 24DC/ 24DC/10 - 2320225
Uninterruptible power supply with IQ technology for DIN rail mounting, input: 24 V DC, output: 24 V DC/10 A, including mounted universal DIN rail adapter UTA 107/30
QUINT-UPS/24DC/24DC/5 - 2320212
Uninterruptible power supply with IQ technology for DIN rail mounting, input: 24 V DC, output: 24 V DC/5 A, including mounted universal DIN rail adapter UTA 107/30
QUINT-PS/3AC/24DC/ 5 - 2866734
Primary-switched power supply unit, QUINT POWER, Pluggable screw connection, SFB Technology (Selective Fuse Breaking), input: 3-phase, output: 24 V DC / 5 A
QUINT4-DIODE/48DC/2X20/1X40 - 2907720
DIN rail diode module 48 V DC/2x20 A or 1x40 A. Uniform redundancy up to the consumer.
QUINT-UPS/ 24DC/ 24DC/40 - 2320241
Uninterruptible power supply with IQ technology for DIN rail mounting, input: 24 V DC, output: 24 V DC/40 A, including mounted universal DIN rail adapter UTA 107/30
QUINT-UPS/ 24DC/12DC/5/24DC/10 - 2320461
Uninterruptible power supply with IQ technology for DIN rail mounting, input: 24 V DC, output: 24 V DC/10 A and 12 V DC/5 A, including mounted universal DIN rail adapter UTA 107/30
QUINT-UPS/ 1AC/ 1AC/500VA - 2320270
Uninterruptible power supply with IQ technology 1AC/1AC/500 VA. For 120 V AC/230 V AC applications. Provides information regarding the charging state, remaining runtime, and service life of your rechargeable battery module at all times and thereby increases system
QUINT-PS/3AC/24DC/10 - 2866705
Primary-switched power supply unit, QUINT POWER, Pluggable screw connection, SFB Technology (Selective Fuse Breaking), input: 3-phase, output: 24 V DC / 10 A
QUINT-PS/1AC/48DC/ 5 - 2866679
Primary-switched power supply unit, QUINT POWER, Pluggable screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 48 V DC / 5 A
UPS-BAT-KIT-WTR 2X12V/26AH - 2908369
Replacement battery for UPS-BAT/VRLA-WTR... energy storage
UPS-BAT-KIT-WTR 2X12V/13AH - 2908368
Replacement battery for UPS-BAT/VRLA-WTR... energy storage
UPS-BAT-KIT/PB/2X12V/12AH - 1283121
Replacement battery, VRLA-AGM, 2x12 V DC, 12 Ah
UPS-BAT-KIT/PB/2X12V/7AH - 1283119
Replacement battery, VRLA-AGM, 2x12 V DC, 7 Ah
QUINT-PS/1AC/12DC/15 - 2866718
Primary-switched power supply unit, QUINT POWER, Pluggable screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 12 V DC / 15 A
QUINT-PS/1AC/48DC/10 - 2866682
Primary-switched power supply unit, QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 48 V DC / 10 A
QUINT-PS-ADAPTER/2 - 2938183
Adapter for mounting QUINT-POWER power supply units, 1 A, 2.5 A, and 5 A, at a 90° angle to the DIN rail
UNO2-PS/1AC/48DC/240W - 1110155
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 48 V DC / 5 A
TRIO-PS-2G/1AC/24DC/10 - 2903149
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: single phase, output: 24 V DC/10 A
UNO-PS/1AC/24DC/ 60W - 2902992
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/60 W
UNO-PS/1AC/24DC/ 30W - 2902991
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/30 W
TRIO-PS-2G/1AC/24DC/5 - 2903148
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 1-phase, output: 24 V DC/5 A
TRIO-PS-2G/1500DC/24DC/1.5 - 1107892
Primary-switched TRIO POWER DC/DC converter with Push-in connection for DIN rail mounting, input: 1,500 V DC, output: 24 V DC / 1.5 A
QUINT-UPS/24DC/24DC/40/C1 - 2909892
Customer-specific uninterruptible power supply with IQ technology for DIN rail mounting; version with customer-specific parameters, input: 24 V DC, output: 24 V DC/40 A, including mounted UTA 107/30 universal DIN rail adapter
PT PE/S+1X2-24-ST - 2819008
Protective plug PT with surge voltage equipment protection for power supply units, visual error display, nominal voltage: 24 V and a 2-core floating signal circuit, nominal voltage: 24 V.
TRIO-PS-2G/1AC/24DC/20 - 2903151
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: single-phase, output: 24 V DC/20 A
STEP-PS/ 1AC/24DC/2.5 - 2868651
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/2.5 A
TRIO-PS67/1AC/24DC/3.75/M12 - 1278165
Primary-switched power supply unit, TRIO POWER, M12 circular connector, Wall mounting, input: 1-phase, output: 24 V DC / 3.75 A
STEP3-PS/1AC/15DC/4/PT - 1170956
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 15 V DC / 4 A
STEP3-PS/1AC/12DC/5/PT - 1170955
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 12 V DC / 5 A
TRIO-PS-2G/1AC/24DC/3/C2LPS - 2903147
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 1-phase, output: 24 V DC/3 A C2LPS
UNO-PS/1AC/24DC/100W - 2902993
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/100 W
STEP3-PS/1AC/24DC/3.75/PT/LED - 1285036
Primary-switched LED power supply, STEP POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 3.75 A
TRIO-PS67/1AC/24DC/10/IPD - 1111664
TRIO POWER primary-switched power supply in IP67 die-cast housing, input: 1-phase, output: 24 V DC / 10 A
STEP-PS/ 1AC/12DC/3 - 2868570
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/3 A
TRIO-UPS/1AC/24DC/ 5 - 2866611
Uninterruptible power supply with integrated power supply unit. For lead AGM energy storage of type MINI-BAT/24/DC/1.3 AH, QUINT-BAT/24DC 3.4 AH … 12 AH nominal capacity. Input: 1-phase, output: 24 V DC / 5 A. Screw connection technology
UNO-PS/1AC/24DC/150W - 2904376
Primary-switched UNO power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/150 W
TRIO-PS-2G/3AC/24DC/20 - 2903155
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 3-phase, output: 24 V DC/20 A
STEP-PS/ 1AC/24DC/1.75 - 2868648
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.75 A
TRIO-PS-2G/3AC/24DC/10 - 2903154
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 3-phase, output: 24 V DC/10 A
STEP-PS/ 1AC/24DC/0.75 - 2868635
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/0.75 A
STEP-PS/ 1AC/24DC/0.5 - 2868596
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/0.5 A
UNO2-PS/1AC/24DC/240W - 1096432
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A
STEP-PS/ 1AC/24DC/4.2 - 2868664
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/4.2 A
UNO-PS/1AC/ 5DC/ 25W - 2904374
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/25 W
TRIO-PS-2G/3AC/24DC/5 - 2903153
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 3-phase, output: 24 V DC/5 A
UNO-PS/1AC/12DC/ 55W - 2902999
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/55 W
TRIO-PS/1AC/12DC/ 5 - 2866475
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/5 A
UNO2-PS/1AC/24DC/120W - 1110466
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 5 A
UNO2-PS/1AC/24DC/480W - 2910105
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 20 A
TRIO-PS-2G/1AC/48DC/5 - 2903159
Primary-switched TRIO power supply for DIN rail mounting, input: 1-phase, output: 48 V DC / 5 A, dynamic boost, tool-free fast connection technology for solid and stranded conductors with ferrule
TRIO-PS-2G/1AC/48DC/10 - 2903160
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: single phase, output: 48 V DC/10 A
STEP-PS/ 1AC/ 5DC/6.5 - 2868541
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/6.5 A
STEP-PS/ 1AC/12DC/1 - 2868538
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/1 A
STEP3-PS/1AC/24DC/5/PT - 1088478
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 5 A
STEP3-PS/1AC/24DC/2.5/PT - 1088491
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 2.5 A
UNO-PS/2AC/24DC/90W/C2LPS - 2904371
Primary-switched UNO POWER power supply for DIN rail mounting, input: 2-phase, output: 24 V DC/90 W
TRIO-PS-2G/1AC/12DC/5/C2LPS - 2903157
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 1-phase, output: 12 V DC/5 A C2LPS
UNO-PS/1AC/12DC/ 30W - 2902998
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/30 W
STEP3-PS/1AC/24DC/1.3/PT - 1088494
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 1.3 A
TRIO-PS-2G/1AC/12DC/10 - 2903158
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 1-phase, output: 12 V DC/10 A
STEP-PS/ 1AC/24DC/3.8/C2LPS - 2868677
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/3.8 A
STEP-PS/ 1AC/12DC/1.5 - 2868567
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/1.5 A
STEP-PS/ 1AC/ 5DC/2 - 2320513
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/2 A
TRIO-PS-2G/3AC/24DC/40 - 2903156
Primary-switched TRIO power supply for DIN rail mounting, input: 3-phase, output: 24 V DC/40 A, dynamic boost, tool-free fast connection technology for solid and stranded conductors with ferrule
STEP-PS/ 1AC/12DC/5 - 2868583
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/5 A
TRIO-PS/1AC/12DC/10 - 2866488
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/10 A
TRIO-PS/3AC/24DC/40 - 2866404
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 3-phase, output: 24 V DC/40 A
STEP3-PS/1AC/12DC/1.3/PT - 1170952
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 12 V DC / 1.3 A
TRIO-PS-2G/1AC/24DC/10/B+D - 2903145
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: single phase, output: 24 V DC/10 A
STEP-PS/ 1AC/48DC/2 - 2868680
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 48 V DC/2 A
TRIO-PS/1AC/48DC/ 5 - 2866491
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 48 V DC/5 A
STEP3-PS/1AC/12DC/2.5/PT - 1170953
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 12 V DC / 2.5 A
UNO-PS/1AC/ 5DC/ 40W - 2904375
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/40 W
TRIO-PS-2G/1AC/24DC/5/B+D - 2903144
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 1-phase, output: 24 V DC/5 A
UNO-PS/1AC/12DC/100W - 2902997
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/100 W
STEP3-PS/1AC/24DC/0.63/PT - 1088495
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 0.63 A
UNO-PS/1AC/48DC/ 60W - 2902995
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 48 V DC/60 W
TRIO-PS/1AC/48DC/10 - 2866501
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 48 V DC/10 A
STEP-PS/277AC/24DC/3.5 - 2904945
DIN rail power supply unit 24 V DC/3.5 A, primary switched-mode, 1-phase.
STEP-PS/ 1AC/12DC/1.5/FL - 2868554
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/1.5 A
UNO-PS/1AC/24DC/100W/H - 1088851
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/100 W
UNO-PS/1AC/48DC/100W - 2902996
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 48 V DC/100 W
STEP-PS/ 1AC/24DC/0.75/FL - 2868622
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/0.75 A
TRIO-PS/600DC/24DC/20 - 2866530
DIN rail power supply unit, primary-switched, 1-phase, input: 600 V DC, output: 24 V DC/20 A
STEP3-PS/1AC/5DC/3/PT - 1170954
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 5 V DC / 3 A
UNO-PS/1AC/15DC/100W - 2903002
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/100 W
UNO-PS/1AC/15DC/30W - 2903000
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/30 W
UNO-PS/1AC/24DC/90W/C2LPS - 2902994
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/90 W
UNO-PS/1AC/12DC/ 55W/H - 1088850
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/55 W
STEP3-PS/1AC/24DC/4/PT - 1140066
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 4 A
STEP3-PS/1AC/24DC/3.75/PT/FL - 1088486
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 3.75 A
STEP-PS/ 1AC/15DC/4 - 2868619
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/4 A
TRIO-PS-IP67/1AC/24DC/20 - 1039830
TRIO POWER primary-switched power supply in IP67 die-cast housing, input: 1-phase, output: 24 V DC / 20 A
UNO-PS/1AC/15DC/ 55W - 2903001
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/55 W
TRIO-PS/1AC/5DC/10 - 2902646
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V DC/10 A
STEP-PS/48AC/24DC/0.5 - 2868716
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/0.5 A
TRIO-PS67/1AC/24DC/10/M12 - 1111634
TRIO POWER primary-switched power supply in IP67 die-cast housing, M12 circular connector, input: 1-phase, output: 24 V DC/10 A
TRIO-PS-2G/3AC/72DC/14 - 1076188
Primary-switched TRIO power supply for DIN rail mounting, input: 3-phase, output: 72 V DC/14 A, dynamic boost, tool-free fast connection technology for rigid and flexible conductors with ferrule
EM-CPS-PS/3AC/24DC/20/8C/IOL - 1067898
Primary-switched power supply unit, TRIO POWER, Snap-on connection, Cross Power System - installation, input: 3-phase, output: 24 V DC / 20 A
TRIO-PS67/1AC/24DC/8/INC - 1065976
TRIO POWER primary-switched power supply in IP67 die-cast housing, 7/8″ circular connector, input: 1-phase, output: 24 V DC/8 A
EM-CPS-PS/3AC/24DC/5 - 1064922
Primary-switched power supply unit, TRIO POWER, Snap-on connection, Cross Power System - installation, input: 3-phase, output: 24 V DC / 5 A
TRIO-PS-IP67/3AC/24DC/20 - 1039829
TRIO POWER primary-switched power supply in IP67 die-cast housing, input: 3-phase, output: 24 V DC / 20 A
TMP/EXT.POWER-SUPPLY 100-240V - 0803672
Replacement power supply for THERMOMARK PRIME, input voltage at 100 V AC to 240 V AC / 1.5 A / 50 Hz to 60 Hz, output voltage at 24 V DC / 4.16 A
QUINT4-PS/1AC/110DC/4/... - 1161606
Primary-switched power supply unit, QUINT POWER, Screw connection, output: 110 V DC / 4 A
QUINT-PS/ 3AC/24DC/20/TWINSET - 2901668
Primary-switched QUINT power supply for DIN rail mounting, input: 3-phase, output: 24 V DC/20 A, with integrated SFB (selective fuse breaking) technology, including mounted universal DIN rail adapter UTA 107
QUINT4-PS/3AC/48DC/20/... - 1197484
Customer-specifically programmed version of the primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (Selective Fuse Breaking) Technology, input: 3-phase, output: 24 V DC/20 A
QUINT4-PS/1AC/48DC/20/... - 1197483
Customer-specifically programmed version of the primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (Selective Fuse Breaking) Technology, input: 1-phase, output: 48 V DC/20 A
QUINT-PS/ 1AC/24DC/20/TWINSET - 2901665
DIN rail power supply unit 24 V DC/20 A, primary switched-mode, 1-phase. The SFB technology (Selective Fuse Breaking Technology) can now also be used to trigger standard power circuit breakers reliably and quickly.
QUINT-PS/1AC/48DC/10/SO1 - 1193383
QUINT4-PS/3AC/24DC/40/VASS - 1168603
Preconfigured and read-only version of the primary-switched QUINT POWER power supply with set output voltage and adjusted signaling, input: 3-phase, output: 24 V DC / 40 A
QUINT4-PS/3AC/24DC/20/KONF1 - 1035480
Preconfigured version of the primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (Selective Fuse Breaking) Technology, input: 3-phase,
output: 24 V DC / 20 A
QUINT4-PS/3AC/24DC/40/... - 2908941
Online configured version of the primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC / 40 A
QUINT4-PS/1AC/24DC/20/+/... - 2908940
Version of the QUINT POWER primary-switched power supply for DIN rail mounting programmed according to customer specifications, with selectable output characteristic curve and SFB (Selective Fuse Breaking) Technology, protective coating and integrated decoupling MOSFET, input: 1-phase, output: 24 V DC/20 A
QUINT4-PS/1AC/48DC/10/... - 2908939
Customer-specifically programmed version of the primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (selective fuse breaking) technology, input: 1-phase, output: 48 V DC/10 A
QUINT4-PS/1AC/48DC/5/... - 2908938
Online configured version of the primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 48 V DC / 5 A
QUINT4-PS/1AC/12DC/15/... - 2908937
Online configured version of the primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 12 V DC / 15 A
QUINT4-PS/1AC/24DC/40/... - 2908936
Customer-specifically programmed version of the primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (selective fuse breaking) technology, input: 1-phase, output: 24 V DC/40 A
QUINT4-PS/3AC/24DC/20/... - 2907873
Online configured version of the primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/20 A
QUINT4-PS/3AC/24DC/10/... - 2907872
Online configured version of the primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/10 A
QUINT4-PS/3AC/24DC/5/... - 2907870
Online configured version of the primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/5 A
QUINT4-PS/1AC/24DC/10/... - 2907867
Customer-specifically programmed version of the primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (selective fuse breaking) technology, input: 1-phase, output: 24 V DC/10 A
QUINT4-PS/1AC/24DC/20/... - 2907869
Customer-specifically programmed version of the primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (selective fuse breaking) technology, input: 1-phase, output: 24 V DC/20 A
QUINT4-PS/1AC/24DC/5/... - 2907866
Customer-specifically programmed version of the primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (Selective Fuse Breaking) technology, input: 1-phase, output: 24 V DC / 5 A
QUINT4-PS/1AC/24DC/20/S6 - 1385896
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/20 A
QUINT4-PS/1AC/24DC/20/+/C01 - 1364968
Preconfigured version of the primary-switched QUINT POWER power supply with preset output voltage (24.5 V), input: 1-phase, output: 24 V DC/20 A
QUINT4-PS/1AC/24DC/20/+/C02 - 1364965
Preconfigured version of the primary-switched QUINT POWER power supply with preset output voltage (26 V), input: 1-phase, output: 24 V DC/20 A
QUINT4-PS/3AC/24DC/20/CO - 1343940
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/20 A
QUINT4-PS/3AC/24DC/20/VASS - 1168602
Preconfigured and read-only version of the primary-switched QUINT POWER power supply with set output voltage and adjusted signaling, input: 3-phase, output: 24 V DC / 20 A
TRIO-DIODE/12-24DC/2X10/1X20 - 2866514
Redundancy module with function monitoring, 12 ... 24 V DC, 2x 10 A, 1x 20 A
TRIO-DIODE/48DC/2X10/1X20 - 2866527
Redundancy module with function monitoring, 48 V DC, 2x 10 A, 1x 20 A
TRIO-UPS-2G/1AC/1AC/230V/750VA - 2905909
1AC/1AC/750 VA uninterruptible power supply with integrated energy storage, lead AGM, VRLA technology, 24 V DC, 4 Ah for 230 V AC applications.
ME-MAX-NEF/QUINT10A - 2310769
Filter module for limiting conducted emitted interference from the power supply unit QUINT-PS-100-240AC/24DC/10 (Order no. 2938604).
UNO-UPS/24DC/24DC/60W - 2905907
Uninterruptible energy supply with integrated energy storage, lead AGM, VRLA technology, 24 V DC, 0.8 Ah.
STEP-UPS/24DC/24DC/3/46WH - 1081430
Uninterruptible power supply with integrated battery module. The STEP-BAT/LI-ION/18.5DC/46WH battery module can be re-ordered separately.
THERMOFOX/ADAPTER - 0805010
Power supply unit incl. 4 adapters for operation of the THERMOMARK GO and THERMOMARK GO.K / THERMOFOX printers.
IB IL DALI/PWR-PAC - 2897813
Inline, DALI master, integrated DALI power supply unit, safe electrical isolation, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields
TRIO-UPS-2G/1AC/1AC/120V/750VA - 2905908
1AC/1AC/750 VA uninterruptible power supply with integrated energy storage, lead AGM, VRLA technology, 24 DC, 4 Ah for 120 V AC applications.