Phoenix Contact PT 2X2-24DC-ST - 2838228 là Đầu cắm của chống sét lan truyền đường tín hiệu điều khiển 2-wire, 24VDC, HART-compatible
Đặc tính nổi bật của Đầu cắm chống sét Phoenix Contact PT 2X2-24DC-ST - 2838228
- Có thể kiểm tra phích cắm bằng CHECKMASTER
- Lắp đặt cùng với Đế cắm PT 2x2 ...- BE
- Dễ dàng bảo trì tối đa nhờ thiết kế hai mảnh
- Bộ phận Đế cắm vẫn là một phần không thể thiếu trong quá trình cài đặt
- Bảo vệ nhất quán mạch tín hiệu plug-in
- Bảo vệ tải hai mạch tín hiệu riêng biệt
- Ngắt kết nối trở kháng trung hòa của bộ phận lug này cho mục đích thử nghiệm và bảo trì
Bản vẽ của Đầu cắm chống sét Phoenix Contact PT 2X2-24DC-ST - 2838228

Diagram

Dimensional drawing: Hình vẽ hiển thị mô-đun hoàn chỉnh bao gồm đế cắm và thành phần lug cắm chính

Pictogram

Circuit diagram
Kích thước tiêu chuẩn của Đầu cắm chống sét Phoenix Contact PT 2X2-24DC-ST - 2838228
Height |
44.8 mm |
Width |
17.5 mm |
Depth |
51.7 mm |
Horizontal pitch |
1 Div. |
Complete module height |
90 mm |
Complete module width |
17.7 mm |
Complete module depth |
65.5 mm |
Điều kiện môi trường vận hành của Đầu cắm chống sét Phoenix Contact PT 2X2-24DC-ST - 2838228
Ambient temperature (operation) |
-40 °C ... 85 °C |
Ambient temperature (storage/transport) |
-40 °C ... 85 °C |
Altitude |
≤ 2000 m (amsl (above mean sea level)) |
Degree of protection |
IP20 |
Thông số chung của Đầu cắm chống sét Phoenix Contact PT 2X2-24DC-ST - 2838228
Housing material |
PA 6.6 |
Flammability rating according to UL 94 |
V-0 |
Color |
jet black RAL 9005 |
Overvoltage category |
2 |
Degree of pollution |
III |
Mounting type |
on base element |
Type |
Male |
Direction of action |
Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground |
Arrester can be tested with CHECKMASTER from software version: |
From SW rev. 1.00 |
Mô tả thêm của Đầu cắm chống sét Phoenix Contact PT 2X2-24DC-ST - 2838228
Note |
Technical data is valid in association with the following specified base elements: |
|
PT 2X2+F-BE 2839224 |
|
PT 2X2-BE 2839208 |
Mạch bảo vệ của Đầu cắm chống sét Phoenix Contact PT 2X2-24DC-ST - 2838228
IEC test classification |
C1 |
|
C2 |
|
C3 |
|
D1 |
Nominal voltage UN |
24 V DC |
Maximum continuous voltage UC |
28 V DC |
|
20 V AC |
Rated current |
450 mA (45°C) |
Operating effective current IC at UC |
≤ 5 µA |
Residual current IPE |
≤ 1 µA (with PT 2X2+F-BE) |
|
≤ 4 µA (with PT 2X2-BE) |
Nominal discharge current In (8/20) µs (line-line) |
10 kA |
Nominal discharge current In (8/20) µs (line-earth) |
10 kA |
Pulse discharge current Iimp (10/350) µs |
2.5 kA |
Total discharge current Itotal (8/20) µs |
20 kA |
Max. discharge current Imax (8/20) µs maximum (Core-Core) |
10 kA |
Max. discharge current Imax (8/20) µs maximum (Core-Earth) |
10 kA |
Nominal pulse current Ian (10/1000) µs (Core-Core) |
25 A |
Output voltage limitation at 1 kV/µs (core-core) spike |
≤ 45 V |
Output voltage limitation at 1 kV/µs (core-earth) spike |
≤ 450 V (with PT 2X2-BE) |
|
≤ 1 kV (with PT 2X2+F-BE) |
Output voltage limitation at 1 kV/µs (core-core) static |
≤ 40 V |
Output voltage limitation at 1 kV/µs (core-earth) static |
≤ 25 V (with PT 2X2-BE) |
|
≤ 50 V (with PT 2X2+F-BE) |
Residual voltage at In (line-line) |
≤ 40 V |
Residual voltage at In (line-signalground) |
≤ 450 V |
Residual voltage with Ian (10/1000)µs (conductor-conductor) |
≤ 50 V |
Voltage protection level Up (core-core) |
≤ 70 V (C1 - 1 kV/500 A) |
|
≤ 60 V (C2 - 6 kV / 3 kA) |
|
≤ 70 V (C2 - 10 kV / 5 kA) |
|
≤ 50 V (C3 - 25 A) |
Voltage protection level Up (core-ground) |
≤ 450 V (C1 - 1 kV / 500 A with PT 2X2-BE) |
|
≤ 500 V (C2 - 6 kV / 3 kA with PT 2X2-BE) |
|
≤ 550 V (C2 - 10 kV / 5 kA with PT 2X2-BE) |
|
≤ 1000 V (C2 - 10 kV / 5 kA with PT 2X2+F-BE) |
Voltage protection level Up static (core-core) |
≤ 40 V (C2 - 10 kV / 5 kA) |
Voltage protection level Up static (core-ground) |
≤ 50 V (C2 - 10 kV / 5 kA with PT 2X2-BE) |
|
≤ 100 V (C2 - 10 kV / 5 kA with PT 2X2+F-BE) |
Response time tA (line-line) |
≤ 1 ns |
Response time tA (line-earth) |
≤ 100 ns |
Input attenuation aE, sym. |
typ. 0.5 dB (≤ 1 MHz / 50 Ω) |
|
typ. 0.3 dB (≤ 400 kHz / 150 Ω) |
|
typ. 0.1 dB (≤ 70 kHz / 600 Ω) |
Cut-off frequency fg (3 dB), sym. in 50 Ohm system |
typ. 4.5 MHz |
Cut-off frequency fg (3 dB), sym. in 150 Ohm system |
typ. 1.5 MHz |
Cut-off frequency fg (3 dB), sym. in 600 Ohm system |
typ. 600 kHz |
Capacity (core-core) |
typ. 1.4 nF |
Capacity (core-earth) |
typ. 8 pF (with PT 2X2-BE) |
|
typ. 2 pF (with PT 2X2+F-BE) |
Resistance in series |
2.2 Ω ±10 % |
Surge protection fault message |
none |
Max. required back-up fuse |
500 mA (T) |
Impulse durability (conductor-conductor) |
C1 - 1 kV/500 A |
|
C2 - 6 kV/3 kA |
|
C2 - 10 kV/5 kA |
|
C3 - 25 A |
Impulse durability (conductor-ground) |
C1 - 1 kV/500 A |
|
C2 - 6 kV/3 kA |
|
C2 - 10 kV/5 kA |
|
D1 - 2.5 kA |
Kết nối dữ liệu của Đầu cắm chống sét Phoenix Contact PT 2X2-24DC-ST - 2838228
Connection method |
Screw connection (in connection with the base element) |
Screw thread |
M3 |
Tightening torque |
0.5 Nm |
Stripping length |
8 mm |
Conductor cross section flexible |
0.2 mm² ... 2.5 mm² |
Conductor cross section solid |
0.2 mm² ... 4 mm² |
Conductor cross section AWG |
24 ... 12 |
Thông số Quy-chuẩn của Đầu cắm chống sét Phoenix Contact PT 2X2-24DC-ST - 2838228
Standards/specifications |
IEC 61643-21 2000 + corrigendum 2001 + A1:2008, modified + A2:2012 |
|
EN 61643-21 2001 + A1:2009 + A2:2013 |
Tiêu chuẩn phân lớp của Đầu cắm chống sét Phoenix Contact PT 2X2-24DC-ST - 2838228
eCl@ss
eCl@ss 4.0 |
27140201 |
eCl@ss 4.1 |
27130801 |
eCl@ss 5.0 |
27130801 |
eCl@ss 5.1 |
27130801 |
eCl@ss 6.0 |
27130807 |
eCl@ss 7.0 |
27130807 |
eCl@ss 8.0 |
27130807 |
eCl@ss 9.0 |
27130807 |
ETIM
ETIM 2.0 |
EC000943 |
ETIM 3.0 |
EC000943 |
ETIM 4.0 |
EC000943 |
ETIM 5.0 |
EC000943 |
ETIM 6.0 |
EC000943 |
UNSPSC
UNSPSC 6.01 |
30212010 |
UNSPSC 7.0901 |
39121610 |
UNSPSC 11 |
39121610 |
UNSPSC 12.01 |
39121610 |
UNSPSC 13.2 |
39121620 |
Approvals của Đầu cắm chống sét Phoenix Contact PT 2X2-24DC-ST - 2838228
Tham khảo thêm các model khác cùng loại:
TTC-6-1X2-24DC-UT - Surge protection device
2906798
Surge protection for a 2-wire floating signal circuit, e.g., 0(4) mA ... 20 mA current loop, HART-compatible. Can be used in safety-related circuits up to SIL 3.
ATP-STTB 4 - Partition plate
3030747
Partition plate, depth: 53 mm, width: 2 mm, height: 88.7 mm, color: gray
TTC-3-1X2-24DC-PT - Surge protection device
2907325
Surge protection for a 2-wire floating signal circuit, e.g., 0(4) mA ... 20 mA current loop, HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT 1X2-24DC-ST - Surge protection plug
2856032
PT protective connector with protective circuit for a 2-wire floating signal circuit. HART-compatible.
PT 1X2-BE - Surge protection base-element
2856113
Base element for protective plug PT with protective circuit for a 2-core floating signal circuit. Mounting on NS 35/7.5 und NS 35/15, housing width: 17.5 mm.
PT 2X2-BE - Surge protection base-element
2839208
Base element for protective plug PT with protective circuit for two 2-wire floating signal circuit, bridge between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm
TTC-6P-1X2-24DC-PT-I - Surge protection device
2906815
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit, e.g., 0(4) mA ... 20 mA current loop, HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT 2X2+F-BE - Surge protection base-element
2839224
Base element for protective plug PT with protective circuit for two 2-wire floating signal circuit, gas-filled surge arrester between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm
TTC-6-1X2-24DC-PT - Surge protection device
2906804
Surge protection for a 2-wire floating signal circuit, e.g., 0(4) mA ... 20 mA current loop, HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6-TVSD-C-24DC-UT-I - Surge protection device
2906831
Fine surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
PT 4-BE - Surge protection base-element
2839402
Base element for protective plug PT with protective circuit for a 4-wire floating signal circuit, bridge between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm
PT 1X2+F-BE - Surge protection base-element
2856126
Base element for protective plug PT with protective circuit for a 2-core floating signal circuit. Integrated gas arrester as coarse protection between GND and PE. Mounting on NS 35/7.5 und NS 35/15, housing width: 17.5 mm.
LIT 1X2-24 - Surge protection device
2804610
Surge protection in a one-piece 6.2 mm wide DIN rail module for one floating signal circuit in 2-conductor technology. Tested in accordance with the following types of protection in Ex areas: Ex ia IIC / Ex iaD. HART-compatible.
CLT-10P/2-MOV-230V-I-P - Surge protection plug
1669983
Surge protection plug, directly pluggable on 2 terminal blocks, with integrated status indicator on the module for a 2-wire floating signal circuit with high nominal current. Nominal voltage: 230 V AC
TTC-6P-1X2-F-M-24DC-PT-I - Surge protection device
2906790
Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for a 2-wire floating signal circuit, e.g., 0(4) mA ... 20 mA current loop. Indirect grounding via gas discharge tube, HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT 2X2-24DC-ST - Surge protection plug
2838228
PT protective connector with protective circuit for two 2-wire floating signal circuits. 24 V DC nominal voltage. HART-compatible.
TTC-6P-2-HC-24DC-PT-I - Surge protection device
2906817
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit with high nominal current. Can be used in safety-related circuits up to SIL 3.
TTC-6-MOV-C-120AC-UT-I - Surge protection device
2906840
Medium surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
PT-BE/FM - Type 3 surge protection base element
2839282
Base element for protective plug PT, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm
TTC-6-1X2-M-24DC-PT-I - Surge protection device
2906726
Surge protection with integrated status indicator and knife disconnection for a 2-wire floating signal circuit, e.g., 0(4) ... 20 mA current loop, Ex e approval for zone 2, HART compatible. Can be used in safety-related circuits up to SIL 3.
TTC-3-LCP - Cover
2908843
End cover for terminating a row of TERMITRAB complete TTC-3... terminal blocks
TTC-6-FMRS-PT - Remote signaling set
2907811
Module set for the optical monitoring and floating remote signaling of adjacent surge protective devices in the TERMITRAB complete or CLIXTRAB product family. Suitable for directly grounded DIN rails.
TTC-6P-1X2-M-EX-24DC-UT-I - Surge protection device
2906824
Surge protection, consisting of a protective plug and base element, with integrated status indicator and disconnect knife for a 2-wire floating Ex-i signal circuit, e.g., 0(4) ... 20 mA current loop, HART compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6P-3-5DC-PT-I - Surge protection device
1061385
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 3-wire floating signal circuit with high nominal current.
TTC-6P-1X2-M-24DC-PT-I - Surge protection device
2906750
Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for a 2-wire floating signal circuit, e.g., 0(4) ... 20 mA current loop, Ex e approval for zone 2, HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6-2X1-24DC-UT - Surge protection device
2906799
Surge protection for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
LIT 2X1-24 - Surge protection device
2804636
Surge protection in one-piece 6.2 mm wide DIN rail module for two conductors with common reference potential.
TTC-6-LCP - Cover
2908729
End cover for terminating a row of TERMITRAB complete TTC-6... terminal blocks
PT-IQ-PTB-PT - Supply and remote module
2801296
Module for power supply and multi-stage, floating remote signaling of connected surge protection modules.
PT 4X1+F-BE - Surge protection base-element
2839376
Base element for protective plug PT with protective circuit for 4 signal wires, with gas-filled surge arrester between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm
TTC-6P-2X1-M-EX-24DC-UT-I - Surge protection device
2906825
Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for a 2-wire Ex i signal circuit with common reference potential, e.g., digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
TTC-6-2X1-F-M-24DC-UT-I - Surge protection device
2906767
Surge protection with integrated status indicator and disconnect knife for two signal wires with common reference potential. Indirect grounding via gas discharge tube, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
PT 2X1-24DC-ST - Surge protection plug
2856087
Surge protection plug for the base element, coarse and fine protection for two signal wires with common reference potential, common mode voltage coarse protection to ground. Design: 24 V DC
PT PE/S+1X2-24-ST - Surge protection plug
2819008
Protective plug PT with surge voltage equipment protection for power supply units, visual error display, nominal voltage: 24 V and a 2-core floating signal circuit, nominal voltage: 24 V.
TTC-6-1X2-F-M-24DC-UT-I - Surge protection device
2906764
Surge protection with integrated status indicator and knife disconnection for a 2-wire floating signal circuit, e.g., 0(4) mA ... 20 mA current loop. Indirect grounding via gas discharge tube, HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6P-1X2-24DC-UT-I - Surge protection device
2906809
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit, e.g., 0(4) mA ... 20 mA current loop, HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6-FMRS-UT - Remote signaling set
2907810
Module set for the optical monitoring and floating remote signaling of adjacent surge protective devices in the TERMITRAB complete or CLIXTRAB product family. Suitable for directly grounded DIN rails.
TTC-6P-2X1-F-M-24DC-PT-I - Surge protection device
2906794
Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for two signal wires with common reference potential, e.g., digital IN/OUT. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
PT 4X1-24DC-ST - Surge protection plug
2838322
Protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side. Nominal voltage: 24 V DC
TTC-6P-2X1-24DC-PT-I - Surge protection device
2906816
Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
CLT-10P/2-VF-230V-I-P - Surge protection plug
1088564
Surge protection plug, directly pluggable on 2 terminal blocks, with integrated status indicator on the module for a 2-wire floating signal circuit with high nominal current. Nominal voltage: 230 V AC
PT-IQ-2X1+F-24DC-PT - Surge protection device
2801248
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two signal wires with common reference potential. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
TTC-6P-4-24DC-PT-I - Surge protection device
1106014
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 4-wire floating signal circuit with high nominal current. Ideal for 4-conductor measurements, e.g., of temperatures and weights. Can be used in safety-related circuits up to SIL 3.
TTC-6P-2X1-24DC-UT-I - Surge protection device
2906810
Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
TTC-6P-1X2-M-24DC-UT-I - Surge protection device
2906738
Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for a 2-wire floating signal circuit, e.g., 0(4) ... 20 mA current loop, Ex e approval for zone 2, HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6P-3-24DC-PT-I - Surge protection device
1061383
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 3-wire floating signal circuit with high nominal current, Ex e approval for zone 2, HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT PE/S+1X2-BE - Surge protection base-element
2856265
Base element for protective plug PT with surge voltage device protection for the power supply unit and one 2-wire floating signal circuit, mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm
TTC-6-TVSD-C-12DC-PT-I - Surge protection device
2906847
Fine surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
LIT 4-12 - Surge protection device
2804704
Surge protection in one-piece 6.2 mm wide DIN rail module for four floating signal wires.
PT-IQ-1X2+F-24DC-UT - Surge protection device
2800977
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module, for one 2-wire floating signal circuit. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
PT 2X2-12DC-ST - Surge protection plug
2838254
PT protective connector with protective circuit for two 2-wire floating signal circuits. 12 V DC nominal voltage. HART-compatible.
TTC-6-MOV-C-24DC-PT-I - Surge protection device
2906854
Medium surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
TTC-6-2X1-24DC-PT - Surge protection device
2906805
Surge protection for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
S-PT-EX(I)-24DC-1/2" - Surge protection device
2882572
Surge protection in the IP67 screw-on module for measuring sensors in intrinsically safe circuits, direct mounting with 1/2'' NPT external thread, cable gland for the signal line, two-stage protective circuit. HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6P-1X2-24DC-I-P - Surge protection plug
2907840
Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 24 V DC
S-PT-EX-24DC-1/2" - Surge protection device
2800035
Surge protection for a floating signal circuit in the screw-on module with IP67 degree of protection for sensor heads, connection: ½-inch 14 NPT. Tested in accordance with the following types of protection in Ex areas: Ex d/Ex tD/Ex ia IIC/Ex iaD. Suitable for use in the fieldbus system in accordance with the FISCO concept, HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6-GDT-C-24AC-PT-I - Surge protection device
2906860
Coarse surge protection with integrated status indicator for a signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
TTC-6P-4-24DC-UT-I - Surge protection device
1106013
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 4-wire floating signal circuit with high nominal current. Ideal for 4-conductor measurements, e.g., of temperatures and weights. Can be used in safety-related circuits up to SIL 3.
PT 2X1+F-BE/FM - Surge protection base-element
2920049
Base element to accept a protective plug with diagnostic and status indicator for two signal wires with common reference potential, integrated spark gap to provide a high-resistance connection between the ground of the protective circuit of the plug and ground potential.
PT 1X2-24AC-ST - Surge protection plug
2856058
PT protective connector with protective circuit for a 2-wire floating signal circuit. HART-compatible.
TTC-6P-2X1-M-24DC-UT-I - Surge protection device
2906741
Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for two signal wires with common reference potential, e.g., digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
TTC-6-1X2-F-M-24DC-PT-I - Surge protection device
2906772
Surge protection with integrated status indicator and knife disconnection for a 2-wire floating signal circuit, e.g., 0(4) mA ... 20 mA current loop. Indirect grounding via gas discharge tube, HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6-MOV-D-24DC-UT-I - Surge protection device
2906841
Medium surge protection with integrated status indicator for one 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
S-PT-EX-48DC-1/2" - Surge protection device
2800054
Surge protection for a floating signal circuit in the screw-on module with IP67 degree of protection for sensor heads, connection: ½-inch 14 NPT. Tested in accordance with the following types of protection in Ex areas: Ex d/Ex tD/Ex ia IIC/Ex iaD. Suitable for use in the fieldbus system in accordance with the FISCO concept. Can be used in safety-related circuits up to SIL 3.
PT-IQ-2X2-EX-24DC-UT - Surge protection device
2801513
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module, for two 2-wire floating Ex i signal circuits. HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6P-2X1-24DC-I-P - Surge protection plug
2907843
Surge protection plug with integrated status indicator on the module for two signal wires with a common reference potential. Nominal voltage: 24 V DC
LIT 2X2-24 - Surge protection device
2804623
Surge protection in a one-piece 6.2 mm wide DIN rail module for two floating signal circuits in 2-conductor technology. Tested in accordance with the following types of protection in Ex areas: Ex ia IIC / Ex iaD. HART-compatible.
PT 2X1VA-230AC-ST - Surge protection plug
2839198
Protective plug PT with protective circuit for higher signal voltages, 2-channel, visual error warning. Nominal voltage: 230 V AC
TTC-6P-2X1-F-24DC-UT-I - Surge protection device
1065319
Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
S-PT-EX(I)-24DC - Surge protection device
2880671
Surge protection in the IP67 screw-on module for measuring sensors in intrinsically safe circuits, direct mounting with M20 x 1.5 external thread, cable gland for the signal line, two-stage protective circuit. HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT 4-12DC-ST - Surge protection plug
2839237
Protective plug PT with protective circuit for a 4-core floating signal circuit. Nominal voltage: 12 V DC
TTC-6P-2X1-F-24DC-PT-I - Surge protection device
1065320
Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
PT-IQ-PTB-P - Plug
2800989
Replacement plug for the PLUGTRAB PT-IQ-PTB... supply and remote signaling module
TTC-6-2-HC-M-24DC-UT-I - Surge protection device
2906719
Surge protection with integrated status indicator and knife disconnection for a 2-wire floating signal circuit with high nominal current. Can be used in safety-related circuits up to SIL 3.
CTM 2X1-110AC - Surge protection plug
2838526
LSA-PLUS plug (COMTRAB CTM) with protective circuit for 2-conductor signal circuits grounded on one side. Nominal voltage: 110 V AC
PT 4-F-ST - Surge protection plug
2858441
Surge protection plug for the base element, coarse protection for four signal lines grounded on one side.
PT 2X1-24DC/FM-ST - Surge protection plug
2920120
Surge protection plug with integrated diagnostic and status indicator on the module and remote indication contact for two signal wires with common reference potential. Nominal voltage: 24 V DC
LIT 4-24 - Surge protection device
2804678
Surge protection in one-piece 6.2 mm wide DIN rail module for four floating signal wires.
TTC-6P-1X2-12DC-PT-I - Surge protection device
2908193
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
TTC-6P-2X1-12DC-I-P - Surge protection plug
2907842
Surge protection plug with integrated status indicator on the module for two signal wires with a common reference potential. Nominal voltage: 12 V DC
TTC-6-TVSD-D-24DC-PT-I - Surge protection device
2906851
Fine surge protection with integrated status indicator for one 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
PT 4X1-24AC-ST - Surge protection plug
2838351
Protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side. Nominal voltage: 24 V AC
TTC-6P-2X1-12DC-PT-I - Surge protection device
2908202
Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
PT 2X1VA-120AC-ST - Surge protection plug
2839185
Protective plug PT with protective circuit for higher signal voltages, 2-channel, visual error warning. Nominal voltage: 120 V AC
TTC-6-1X2-M-EX-24DC-UT-I - Surge protection device
2906820
Surge protection with integrated status indicator and disconnect knife for one 2-wire floating Ex i signal circuit, e.g., 0(4) ... 20 mA current loop, HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT 1X2-24DC/FM-ST - Surge protection plug
2920078
Surge protection plug with integrated diagnostic and status indicator on the module and remote indication contact for a 2-wire floating signal circuit.
TTC-6P-2-HC-M-24DC-UT-I - Surge protection device
2906743
Surge protection, consisting of protective plug and base element, with integrated status indicator and knife disconnection for a 2-wire floating signal circuit with high nominal current. Can be used in safety-related circuits up to SIL 3.
TTC-6-MOV-C-48DC-PT-I - Surge protection device
2906855
Medium surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
TTC-6-TVSD-D-24DC-UT-I - Surge protection device
2906834
Fine surge protection with integrated status indicator for one 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
LIT 4X1-24 - Surge protection device
2804649
Surge protection in one-piece 6.2 mm wide DIN rail module for four conductors with common reference potential.
CTM 2X1- 24DC - Surge protection plug
2838500
LSA-PLUS plug (COMTRAB CTM) with protective circuit for 2-conductor signal circuits grounded on one side. Nominal voltage: 24 V DC
TTC-6-2X1-F-M-24DC-PT-I - Surge protection device
2906776
Surge protection with integrated status indicator and disconnect knife for two signal wires with common reference potential. Indirect grounding via gas discharge tube, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
TTC-6P-2-HC-24DC-UT-I - Surge protection device
2906811
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit with high nominal current. Can be used in safety-related circuits up to SIL 3.
CLT-20P/4-VF-230V-I-P - Surge protection plug
1088567
Surge protection plug, directly pluggable on 4 terminal blocks, with integrated status indicator on the module for a 4-wire floating signal circuit with high nominal current. Nominal voltage: 230 V AC
PT 1X2-12DC-ST - Surge protection plug
2856029
PT protective connector with protective circuit for a 2-wire floating signal circuit. HART-compatible.
PT 1X2- 5DC-ST - Surge protection plug
2856016
PT protective connector with protective circuit for a 2-wire floating signal circuit. HART-compatible.
TTC-6-2X1-M-24DC-UT-I - Surge protection device
2906716
Surge protection with integrated status indicator and disconnect knife for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
TTC-6-GDT-D-24AC-PT-I - Surge protection device
2906862
Coarse surge protection with integrated status indicator for a 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
PT 4X1-BE - Surge protection base-element
2839363
Base element for protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side, with bridge between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm
PT 2X1-VF-120AC - Surge protection device
2859327
Rail-mountable surge arrester for higher signal voltages. Protective circuit free of leakage current for two floating signals.
Nominal voltage: 120 V AC
TTC-6P-1X2-48DC-PT-I - Surge protection device
2908195
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
LIT 2-12 - Surge protection device
2804694
Surge protection in one-piece 6.2 mm wide DIN rail module for two floating signal wires. Tested in acc. with the protection types in Ex areas: Ex ia IIC / Ex iaD.
PT-IQ-PTB-BE-UT - Surge protection base-element
2905364
Base element for the PLUGTRAB PT-IQ-PTB... supply and remote signaling module
TTC-6-FC-UT - Fuse holder
1054762
Fuse carrier for surge protective devices of the TERMITRAB complete product range with screw connection technology. Multi-level connection on TTC-6 housings possible. For conventional 5x20 mm miniature fuses.
PT-IQ-PTB-UT - Supply and remote module
2800768
Module for power supply and multi-stage, floating remote signaling of connected surge protection modules.
CTM 1X2- 60DC - Surge protection plug
2838568
LSA-PLUS plug (COMTRAB CTM) with protection for conductor pairs in floating signal circuits. Nominal voltage: 60 V DC
TTC-6P-1X2-EX-24DC-UT-I - Surge protection device
1065312
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating Ex i signal circuit, e.g., 0(4) mA … 20 mA current loop, HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6P-2X2-24-PT-I - Surge protection device
1334595
Surge protection, consisting of protective plug and base element, with integrated status indicator for two 2-wire floating signal circuits, e.g., two 0(4) ... 20 mA current loops, HART-compatible.
TTC-6-GDT-C-110AC-UT-I - Surge protection device
2906844
Coarse surge protection with integrated status indicator for a signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
PT 2XEX(I)-24DC-ST - Surge protection plug
2838225
PT protective plug with protective circuit for two 2-wire floating Ex i signal circuits. Nominal voltage: 24 V DC, HART-compatible.
TTC-6-TVSD-C-12DC-UT-I - Surge protection device
2906829
Fine surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
S-PT-4-EX-24DC-1/2" - Surge protection device
2800037
Two-stage surge protection for three or four signals of floating signal circuits in the screw-on module with IP67 degree of protection for sensor heads, connection ½-inch 14 NPT. Tested in accordance with the following types of protection in Ex areas: Ex d/Ex tD/Ex ia IIC/Ex iaD. Suitable for use in the fieldbus system in accordance with the FISCO concept, HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT-IQ-4X1-24DC-PT - Surge protection device
2801271
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for four signal wires with common reference potential. Can be used in safety-related circuits up to SIL 3.
CTM 2X1- 60DC - Surge protection plug
2838542
LSA-PLUS plug with protective circuit for 2-conductor signal circuits grounded on one side. Nominal voltage: 60 V DC
PT 4-24AC-ST - Surge protection plug
2800078
Protective connector PT with protective circuit for a 4-wire floating signal circuit. Nominal voltage: 24 V AC
TTC-6-1X2-M-24DC-UT-I - Surge protection device
2906713
Surge protection with integrated status indicator and knife disconnection for a 2-wire floating signal circuit, e.g., 0(4) ... 20 mA current loop, Ex e approval for zone 2, HART compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6P-1X2-F-M-24DC-UT-I - Surge protection device
2906781
Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for a 2-wire floating signal circuit, e.g., 0(4) mA ... 20 mA current loop. Indirect grounding via gas discharge tube, HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6-TVSD-C-24DC-PT-I - Surge protection device
2906848
Fine surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
TTC-6-GDT-C-110AC-PT-I - Surge protection device
2906861
Coarse surge protection with integrated status indicator for a signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
CLT-10P/2-2-24V-I-P - Surge protection plug
1088570
Surge protection plug, directly pluggable on 2 terminal blocks, with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 24 V DC
TTC-6-2X1-M-24DC-PT-I - Surge protection device
2906729
Surge protection with integrated status indicator and disconnect knife for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
TTC-6P-4X1-24-PT-I - Surge protection device
1334594
Surge protection, consisting of protective plug and base element, with integrated status indicator for four signal wires with common reference potential, e.g., Digital IN/OUT.
TTC-6P-1X2-12DC-UT-I - Surge protection device
2908192
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
PT-IQ-17,5-TBUS-5-2.0 - DIN rail bus connectors
2906878
DIN rail connector for PT-IQ system for establishing remote signaling and the power supply when a surge protection module is snapped on.
PT 4- 5DC-ST - Surge protection plug
2839211
Protective plug PT with protective circuit for a 4-core floating signal circuit. Nominal voltage: 5 V DC
TTC-6P-2X1-F-M-24DC-UT-I - Surge protection device
2906784
Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for two signal wires with common reference potential, e.g., digital IN/OUT. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
PT 2X1-BE - Surge protection base-element
2856139
Base element for protective plug PT with protective circuit for 2 conductors of signal circuits grounded on one side. Mounting on NS 35/7.5 und NS 35/15, housing width: 17.5 mm.
TTC-3-2X1-24DC-PT - Surge protection device
2907326
Surge protection for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
S-PT-EX-24DC - Surge protection device
2800034
Surge protection for a floating signal circuit in the screw-on module with IP67 degree of protection for sensor heads, connection: M20 x 1.5. Tested in accordance with the following types of protection in Ex areas: Ex d/Ex tD/Ex ia IIC/Ex iaD. Suitable for use in the fieldbus system in accordance with the FISCO concept, HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT-IQ-1X2-EX-24DC-UT - Surge protection device
2801512
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module, for one 2-wire floating Ex i signal circuit, HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT-IQ-1X2-48DC-PT - Surge protection device
2801257
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module, for a 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
PT 4-24DC-ST - Surge protection plug
2839240
Protective plug PT with protective circuit for a 4-core floating signal circuit. Nominal voltage: 24 V DC
TTC-6P-2X1-M-24DC-PT-I - Surge protection device
2906753
Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for two signal wires with common reference potential, e.g., digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
S-PT-1X2-24DC-1/2" - Surge protection device
2882569
Surge protection in the IP67 screw-on module for measuring sensors, direct mounting with 1/2" NPT outer thread, cable gland for the signal line, two-stage protective circuit. HART-compatible. Can be used in safety-related circuits up to SIL 3.
S-PT-1X2-24DC - Surge protection device
2880668
Surge protection in the IP67 screw-on module for measuring sensors, direct mounting with M20 x 1.5 outer thread, cable gland for the signal line, two-stage protective circuit. HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6P-2X1-48DC-PT-I - Surge protection device
2908204
Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
TTC-6-2-HC-24DC-PT-I - Surge protection device
2908439
Surge protection with integrated status indicator for a 2-wire floating signal circuit with high nominal current. Can be used in safety-related circuits up to SIL 3.
TTC-6-2-HC-24DC-UT-I - Surge protection device
2908438
Surge protection with integrated status indicator for a 2-wire floating signal circuit with high nominal current. Can be used in safety-related circuits up to SIL 3.
PT-IQ-4X1+F-24DC-PT - Surge protection device
2801272
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for four signal wires with common reference potential. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
PT-IQ-4X1-24DC-P - Surge protection plug
2800813
Surge protection plug with integrated multi-stage status indicator on the module for four signal wires with common reference potential. 24 V DC nominal voltage.
PT 4X1-48DC-ST - Surge protection plug
2858014
Surge protection plug for the base element, common mode voltage coarse and fine protection for four lines with a common reference potential. Design: 48 V DC
PT-IQ-2X2-24DC-PT - Surge protection device
2801263
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two 2-wire floating signal circuits. Can be used in safety-related circuits up to SIL 3.
PT 2X1+F-BE - Surge protection base-element
2856142
Base element for protective plug PT with protective circuit for 2 conductors of signal circuits grounded on one side. Integrated gas arrester as coarse protection between GND and PE. Mounting on NS 35/7.5 und NS 35/15, housing width: 17.5 mm.
TTC-6P-1X2-12DC-I-P - Surge protection plug
2907839
Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 12 V DC
PT-IQ-1X2+F-24DC-PT - Surge protection device
2801256
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module, for one 2-wire floating signal circuit. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
PT 1X2-48DC-ST - Surge protection plug
2803658
Protective plug PT with protective circuit for a 2-wire floating signal circuit.
PT 4-EX(I)-24DC-ST - Surge protection plug
2839253
PT protective connector with protective circuit for a 4-wire floating Ex-i signal circuit. Nominal voltage: 24 V DC
PT 4+F-BE - Surge protection base-element
2839415
Base element for protective plug PT with protective circuit for a 4-wire floating signal circuit, gas-filled surge arrester between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5 and NS35/15, housing width: 17.5 mm
D-UKK 3/5 BK - End cover
2770228
End cover, width: 2.5 mm, height: 66.5 mm, color: black
TTC-6P-1X2-F-24DC-PT-I - Surge protection device
1065318
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit. Indirect grounding via gas discharge tube, HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT 2X2- 5DC-ST - Surge protection plug
2838241
PT protective connector with protective circuit for two 2-wire floating signal circuits. 5 V DC nominal voltage. HART-compatible.
TTC-6-2X1-M-EX-24DC-UT-I - Surge protection device
2906821
Surge protection with integrated status indicator and disconnect knife for a 2-wire Ex i signal circuit with common reference potential. Can be used in safety-related circuits up to SIL 3.
CLT-10P/2-2-12V-I-P - Surge protection plug
1088569
Surge protection plug, directly pluggable on 2 terminal blocks, with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 12 V DC
CT 10-18FS+F/PE-24 - Surge protection plug
2807926
LSA-PLUS plug (COMTRAB CT 10) with coarse/fine surge protection for 18 signal lines - GND and GND - PE coarse protection. Nominal voltage: 24 V DC. Version: 10 double wires.
PT-IQ-2X2-24DC-P - Surge protection plug
2800804
Surge protection plug with integrated multi-stage status indicator on the module for two 2-wire floating signal circuits. 24 V DC nominal voltage.
CLT-10P/2-2-60V-I-P - Surge protection plug
1088573
Surge protection plug, directly pluggable on 2 terminal blocks, with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 60 V DC
TTC-6-2XTVSD-24DC-PT - Surge protection device
2906808
Fine surge protection for two signal wires with common reference potential. Can be used in safety-related circuits up to SIL 3.
TTC-6-2XTVSD-12DC-PT - Surge protection device
2906807
Fine surge protection for two signal wires with common reference potential. Can be used in safety-related circuits up to SIL 3.
TTC-6-TVSD-C-48DC-UT-I - Surge protection device
2906832
Fine surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
PT-IQ-1X2-24DC-UT - Surge protection device
2800976
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module, for a 2-wire floating signal circuit, HART-compatible. Can be used in safety-related circuits up to SIL 3.
S-PT-4-EX-24DC - Surge protection device
2800036
Two-stage surge protection for three or four signals of floating signal circuits in the screw-on module with IP67 degree of protection for sensor heads, connection: M20 x 1.5. Tested in accordance with the following types of protection in Ex areas: Ex d/Ex tD/Ex ia IIC/Ex iaD. Suitable for use in the fieldbus system in accordance with the FISCO concept, HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6P-2X1-F-12DC-PT-I - Surge protection device
2908206
Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
TTC-6P-2X1-F-12DC-UT-I - Surge protection device
2908205
Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
PT 4-EX(I)-BE - Surge protection base-element
2839486
Base element for protective plug PT with protective circuit for a 4-core floating EEx ia signal circuit. Nominal voltage: 24 V DC, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm
PT-IQ-1X2-24DC-PT - Surge protection device
2801255
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module, for a 2-wire floating signal circuit, HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6P-2-HC-M-24DC-PT-I - Surge protection device
2906755
Surge protection, consisting of protective plug and base element, with integrated status indicator and knife disconnection for a 2-wire floating signal circuit with high nominal current. Can be used in safety-related circuits up to SIL 3.
PT 2X1-BE/FM - Surge protection base-element
2920036
Base element to accept a protective plug with diagnostic and status indicator for two signal wires with common reference potential.
PT 2X2-24AC-ST - Surge protection plug
2838283
PT protective connector with protective circuit for two 2-wire floating signal circuits. 24 V AC nominal voltage. HART-compatible.
PT 2X1VA- 60AC-ST - Surge protection plug
2839172
Protective plug PT with protective circuit for higher signal voltages, 2-channel, visual error display. Nominal voltage: 60 V AC
TTC-6P-2X2-24-I-P - Surge protection plug
1362694
Surge protection plug with integrated status indicator on the module for two 2-wire floating signal circuits. Nominal voltage: 24 V AC/DC
CTM 2X1- 12DC - Surge protection plug
2838584
LSA-PLUS plug (COMTRAB CTM) with protective circuit for 2-conductor signal circuits grounded on one side. Nominal voltage: 12 V DC
TTC-6-FMTX-PT - Remote signaling module transmitter
1193565
Transmitter module, for the visual monitoring and floating remote signaling of adjacent surge protective devices from the TERMITRAB complete or CLIXTRAB product family. Suitable for directly or indirectly grounded DIN rails.
S-PT-EX-48DC - Surge protection device
2800053
Surge protection for a floating signal circuit in the screw-on module with IP67 degree of protection for sensor heads, connection: M20 x 1.5. Tested in accordance with the following types of protection in Ex areas: Ex d/Ex tD/Ex ia IIC/Ex iaD. Suitable for use in the fieldbus system in accordance with the FISCO concept. Can be used in safety-related circuits up to SIL 3.
PT 2X1-VF-230AC - Surge protection device
2805460
Rail-mountable surge arrester for higher signal voltages. Protective circuit free of leakage current for two floating signals.
Nominal voltage: 230 V AC
PT-IQ-3-EX-BE-UT - Surge protection base-element
2905496
Base element for protective plug PLUGTRAB PT-IQ-1X2-EX
TTC-6P-3-24DC-I-P - Surge protection plug
1061384
Surge protection plug with integrated status indicator on the module for a 3-wire floating signal circuit with a high nominal current. Nominal voltage: 24 V DC
TTC-6P-4-24DC-I-P - Surge protection plug
1106015
Surge protection plug with integrated status indicator on the module for a 4-wire floating signal circuit with a high nominal current. Nominal voltage: 24 V DC
PT-IQ-2X2+F-24DC-PT - Surge protection device
2801264
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module, for two 2-wire floating signal circuits. Indirect grounding via gas discharge tube, HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT-IQ-JUMPER-2.0 - Plug-in bridge
2906879
Jumper for PT-IQ basis elements for preventing an error message from the PT-IQ-PTB when the protective plug is not inserted.
PT 2X1VA/S1-230AC-ST - Surge protection plug
2880024
PT protective plug with protective circuit for higher signal voltages, 2-channel. Nominal voltage: 230 V AC
TTC-6-GDT-D-60AC-PT-I - Surge protection device
2906863
Coarse surge protection with integrated status indicator for a 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
PT-IQ-2X1+F-24DC-UT - Surge protection device
2800788
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two signal wires with common reference potential. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
PT-IQ-EX-H-PP - Separating plate
2905024
Partition plate for NS-35/7,5 isolated DIN rails (DIN rail is isolated using the AB/NS support bracket) to ensure a clearance of 50 mm between the controller and surge protection for PT-IQ-EX systems.
PT-IQ-2X2-12DC-P - Surge protection plug
2800803
Surge protection plug with integrated multi-stage status indicator on the module for two 2-wire floating signal circuits. Nominal voltage: 12 V DC
TTC-6P-2X1-F-48DC-UT-I - Surge protection device
2908208
Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
TTC-6P-1X2-F-24DC-UT-I - Surge protection device
1065317
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit. Indirect grounding via gas discharge tube, HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-6-TVSD-D-48DC-PT-I - Surge protection device
2906852
Fine surge protection with integrated status indicator for one 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
CTM 1X2- 12DC - Surge protection plug
2838597
LSA-PLUS plug with protection for conductor pairs in floating signal circuits. Nominal voltage: 12 V DC
PT-IQ-2X1-24DC-UT - Surge protection device
2800787
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two signal wires with common reference potential. Can be used in safety-related circuits up to SIL 3.
PT-IQ-1X2-48DC-P - Surge protection plug
2800773
Surge protection plug with integrated multi-stage status indicator on the module for a 2-wire floating signal circuit. 48 V DC nominal voltage.
TTC-6-MOV-D-24DC-PT-I - Surge protection device
2906859
Medium surge protection with integrated status indicator for one 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
TTC-6P-1X2-48DC-UT-I - Surge protection device
2908194
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
PT-IQ-4X1+F-48DC-PT - Surge protection device
2801274
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for four signal wires with common reference potential. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
TTC-6P-1X2-F-12DC-PT-I - Surge protection device
2908198
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
PT-IQ-4X1-48DC-P - Surge protection plug
2800814
Surge protection plug with integrated multi-stage status indicator on the module for four signal wires with common reference potential. Nominal voltage: 48 V DC
TTC-6-FMTX-UT - Remote signaling module transmitter
1193555
Transmitter module, for the visual monitoring and floating remote signaling of adjacent surge protective devices from the TERMITRAB complete or CLIXTRAB product family. Suitable for directly or indirectly grounded DIN rails.
TTC-6P-2X1-F-48DC-PT-I - Surge protection device
2908209
Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
TTC-6P-2X1-48DC-I-P - Surge protection plug
2907844
Surge protection plug with integrated status indicator on the module for two signal wires with a common reference potential. Nominal voltage: 48 V DC
TTC-6-2-24DC-UT - Surge protection device
2906800
Surge protection for resistance-dependent measuring signals. Can be used in safety-related circuits up to SIL 3.
TTC-6-MOV-C-48DC-UT-I - Surge protection device
2906838
Medium surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
DP-UKK 3/5 BK - Spacer plate
2770833
Spacer plate, to compensate for level offsets, depth: 25 mm, width: 2.5 mm, height: 56 mm, color: black
PT-IQ-2X2+F-48DC-PT - Surge protection device
2801266
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two 2-wire floating signal circuits. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
PT 2X1-VF-120AC-ST - Surge protection plug
2856799
Protective connector with protective circuit free of leakage current for two floating signals. Connection in series, consisting of varistor and gas-filled surge arrester between signal wires and ground.
TTC-6-3-HF-F-12DC-PT - Surge protection device
1109712
Surge protection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).
TTC-6P-3-EX-24DC-UT-I - Surge protection device
1064665
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 3-wire floating Ex i signal circuit, HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT-IQ-2X2-48DC-P - Surge protection plug
2800810
Surge protection plug with integrated multi-stage status indicator on the module for two 2-wire floating signal circuits. Nominal voltage: 48 V DC
PT-IQ-5-BE-UT - Surge protection base-element
2905363
Base element for PLUGTRAB PT-IQ protective plug (5-HF, 4X1, 2X2)
S-PT-2XEX-24DC - Surge protection device
2800040
Surge protection for two floating signal circuits in the screw-on module with IP67 degree of protection for sensor heads, connection: M20 x 1.5. Tested in accordance with the following types of protection in Ex areas: Ex d/Ex tD/Ex ia IIC/Ex iaD. Suitable for use in the fieldbus system in accordance with the FISCO concept. Can be used in safety-related circuits up to SIL 3.
PT 1X2-BE/FM - Type 2 surge protection base element
2920010
Base element to accept a protective plug with diagnostic and status indicator for one floating double wire
TTC-6P-1X2-48DC-I-P - Surge protection plug
2907841
Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 48 V DC
PT-IQ-4X1+F-24DC-UT - Surge protection device
2800983
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for four signal wires with common reference potential. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
PT-IQ-2X2-24DC-UT - Surge protection device
2800980
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module, for two 2-wire floating signal circuits, HART-compatible. Can be used in safety-related circuits up to SIL 3.
TTC-EX-PP - Separating plate
1011977
Partition plate for NS-35/7,5 DIN rails to ensure a clearance of 50 mm between the remote signaling module and surge protection in TTC-EX systems.
TTC-6-MOV-C-60DC-PT-I - Surge protection device
2906857
Medium surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
TTC-6P-1X2-F-48DC-PT-I - Surge protection device
2908200
Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
TTC-6-GDT-C-24AC-UT-I - Surge protection device
2906842
Coarse surge protection with integrated status indicator for a signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
PT-IQ-4X1-24DC-UT - Surge protection device
2800982
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for four signal wires with common reference potential. Can be used in safety-related circuits up to SIL 3.
TTC-6-MOV-D-120AC-PT-I - Surge protection device
1109689
Medium surge protection with integrated status indicator for one 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
PT-IQ-2X2-EX-24DC-P - Surge protection plug
2801515
Surge protection plug with integrated multi-stage status indicator on the module for two 2-wire floating Ex-i signal circuits. Nominal voltage: 24 V DC
TTC-6P-1X2-EX-24DC-I-P - Surge protection plug
2907831
Surge protection plug with integrated status indicator on the module for one 2-wire floating Ex i signal circuit. Nominal voltage: 24 V DC
TTC-6-MOV-D-120AC-UT-I - Surge protection device
1109673
Medium surge protection with integrated status indicator for one 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
PT-IQ-2X1-24DC-P - Surge protection plug
2800776
Surge protection plug with integrated multi-stage status indicator on the module for two signal wires with common reference potential. 24 V DC nominal voltage.
PT-IQ-2X2-5DC-P - Surge protection plug
2800802
Surge protection plug with integrated multi-stage status indicator on the module for two 2-wire floating signal circuits. Nominal voltage: 5 V DC
CT 10-2PE/FS-24 - Surge protection plug
2807955
LSA-PLUS plug (COMTRAB CT 10) with coarse/fine surge protection, for 10 floating signal circuits. Nominal voltage: 24 V DC. Version: 10 double wires.
PT-IQ-3-BE-UT - Surge protection base-element
2910419
Base element for PLUGTRAB PT-IQ protective plug (3-HF, 2X1,1X2)
TTC-6-GDT-D-60AC-UT-I - Surge protection device
2906846
Coarse surge protection with integrated status indicator for a 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
CT 10-2PE/FSR-24 - Surge protection plug
2807968
LSA-PLUS plug (COMTRAB CT 10) with coarse/fine surge protection and decoupling resistor for 10 floating signal circuits. Nominal voltage: 24 V DC. Version: 10 double wires.
TTC-6P-2X1-EX-24DC-I-P - Surge protection plug
2907832
Surge protection plug with integrated status indicator for one 2-wire Ex i signal circuit with common reference potential. Nominal voltage: 24 V DC
PT-IQ-2X1-48DC-P - Surge protection plug
2800777
Surge protection plug with integrated multi-stage status indicator on the module for two signal wires with common reference potential. 48 V DC nominal voltage.
TTC-6P-2X1-48DC-UT-I - Surge protection device
2908203
Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.
TTC-6-FMRX-PT - Remote signaling module receiver
1193571
Receiver module, for the visual monitoring and floating remote signaling of adjacent surge protective devices from the TERMITRAB complete or CLIXTRAB product family. Suitable for directly or indirectly grounded DIN rails.
USLKG 4 BK/BK - Reference potential terminal block
2798789
Reference potential terminal block, When aligning with a feed-through terminal block with the same shape, an end cover must be interposed with insulation voltages of > 690 V, number of connections: 2, number of positions: 1, connection method: Screw connection, Rated cross section: 4 mm2, cross section: 0.2 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, NS 32, color: black
PT 4X1- 5DC-ST - Surge protection plug
2838306
Protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side. Nominal voltage: 5 V DC
SSA 3-6/S1 - Shield connection
2859233
Shield fast connection for 3 ... 6 mm cable diameter. Potential connecting cable: 250 mm, 1 mm2, color: green/yellow
PT-IQ-2X2+F-24DC-UT - Surge protection device
2800981
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module, for two 2-wire floating signal circuits. Indirect grounding via gas discharge tube, HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT 1X2-12DC/FM-ST - Surge protection plug
2920065
Surge protection plug with integrated diagnostic and status indicator on the module and remote indication contact for a 2-wire floating signal circuit.
TTC-6-TVSD-C-48DC-PT-I - Surge protection device
2906849
Fine surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
PT 2X1-VF-230AC-ST - Surge protection plug
2921365
Protective connector with protective circuit free of leakage current for two floating signals. Connection in series, consisting of varistor and gas-filled surge arrester between signal wires and ground.
CLT-10P/2-VF-230V-I-P/50 - Surge protection plug
1634908
Surge protection plug, directly pluggable on 2 terminal blocks, with integrated status indicator on the module for a 2-wire floating signal circuit with high nominal current. Nominal voltage: 230 V AC
PT-IQ-1X2-12DC-P - Surge protection plug
2800771
Surge protection plug with integrated multi-stage status indicator on the module for a 2-wire floating signal circuit. 12 V DC nominal voltage.
SSA 5-10 - Shield connection
2839512
Shield fast connection for 5 ... 10 mm cable diameter. Potential connecting cable: 200 mm, 1 mm2, color: black
PT-IQ-2X1+F-48DC-UT - Surge protection device
2800790
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two signal wires with common reference potential. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
PT-IQ-2X1-24DC-PT - Surge protection device
2801247
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two signal wires with common reference potential. Can be used in safety-related circuits up to SIL 3.
UBK 2-500 - Surge protection device
2798530
DIN rail module with coarse surge protection for two signal wires. Self-contacting grounding foot for mounting on NS 32 or NS 35/7.5, housing width: 17.5 mm. Design: 500 V AC
TTC-6-TVSD-D-48DC-UT-I - Surge protection device
2906835
Fine surge protection with integrated status indicator for one 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.
PT-IQ-1X2-EX-24DC-P - Surge protection plug
2801514
Surge protection plug with integrated multi-stage status indicator on the module for one 2-wire floating Ex-i signal circuit. Nominal voltage: 24 V DC
PT 2XEX(I)-BE - Surge protection base-element
2839279
Base element for protective plug PT with protective circuit for two 2-core floating EEx ia signal circuits. Mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm
TTC-6P-2-HC-24DC-I-P - Surge protection plug
2907845
Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit with high nominal current. Nominal voltage: 24 V DC
LIT 2-24 - Surge protection device
2804665
Surge protection in one-piece 6.2 mm wide DIN rail module for two floating signal wires. Tested in acc. with the protection types in Ex areas: Ex ia IIC / Ex iaD.
PT-IQ-4X1-48DC-UT - Surge protection device
2801219
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for four signal wires with common reference potential. Can be used in safety-related circuits up to SIL 3.
SSA 3-6 - Shield connection
2839295
Shield fast connection for 3 ... 6 mm cable diameter. Potential connecting cable: 200 mm, 1 mm2, color: black
CTM 1X2- 24DC - Surge protection plug
2838513
LSA-PLUS plug (COMTRAB CTM) with protection for conductor pairs in floating signal circuits. Nominal voltage: 24 V DC
TTC-6-FMRX-UT - Remote signaling module receiver
1193557
Receiver module, for the visual monitoring and floating remote signaling of adjacent surge protective devices from the TERMITRAB complete or CLIXTRAB product family. Suitable for directly or indirectly grounded DIN rails.
PT 4X1-48AC-ST - Surge protection plug
2804856
Protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side. Nominal voltage: 48 V AC
S-PT-2XEX-24DC-1/2" - Surge protection device
2800041
Surge protection for two floating signal circuits in the screw-on module with IP67 degree of protection for sensor heads, connection: ½ inch 14 NPT. Tested in accordance with the following types of protection in Ex areas: Ex d/Ex tD/Ex ia IIC/Ex iaD. Suitable for use in the fieldbus system in accordance with the FISCO concept. Can be used in safety-related circuits up to SIL 3.
PT-IQ-5-EX-BE-UT - Surge protection base-element
2905497
Base element for protective plug PLUGTRAB PT-IQ-2X2-EX
TTC-6-2-HC-M-24DC-PT-I - Surge protection device
2906731
Surge protection with integrated status indicator and knife disconnection for a 2-wire floating signal circuit with high nominal current. Can be used in safety-related circuits up to SIL 3.
TTC-6-MOV-C-24DC-UT-I - Surge protection device
2906837
Medium surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
TTC-6P-3-EX-24DC-I-P - Surge protection plug
1064663
Surge protection plug with integrated status indicator on the module for a 3-wire floating Ex i signal circuit. Nominal voltage: 24 V DC
CT 10-18FSR+F/PE-24 - Surge protection plug
2807939
LSA-PLUS plug (COMTRAB CT 10) with coarse/fine surge protection and decoupling resistor for 18 signal lines - GND and GND - PE coarse protection. Nominal voltage: 24 V DC. Version: 10 double wires.
TTC-6P-3-5DC-I-P - Surge protection plug
1061386
Surge protection plug with integrated status indicator on the module for a 3-wire floating signal circuit with a high nominal current. Nominal voltage: 5 V DC
PT-IQ-1X2-24DC-P - Surge protection plug
2800772
Surge protection plug with integrated multi-stage status indicator on the module for a 2-wire floating signal circuit. 24 V DC nominal voltage.
CTM 1X2-110AC - Surge protection plug
2838539
LSA-PLUS plug (COMTRAB CTM) for floating signal circuits, for protecting a double wire from analog and digital telecommunications interfaces (up to 50 Mbps). Nominal voltage: 110 V AC
PT-IQ-EX-L-PP - Separating plate
2905023
Partition plate for NS-35/7,5 DIN rails to ensure a clearance of 50 mm between the controller and surge protection for PT-IQ-EX systems.
TTC-6P-4X1-24-I-P - Surge protection plug
1362692
Surge protection plug with integrated status indicator on the module for four signal wires with common reference potential. Nominal voltage: 24 V AC/DC
PT 2X1-24AC/FM-ST - Surge protection plug
2920146
Surge protection plug with integrated diagnostic and status indicator on the module and remote indication contact for two signal wires with common reference potential. Nominal voltage: 24 V AC
TTC-6-MOV-C-120AC-PT-I - Surge protection device
2906858
Medium surge protection with integrated status indicator for one signal wire with grounded reference potential. Can be used in safety-related circuits up to SIL 3.
TTC-6-2-24DC-PT - Surge protection device
2906806
Surge protection for resistance-dependent measuring signals. Can be used in safety-related circuits up to SIL 3.
PT 2-F-ST - Surge protection plug
2859000
Surge protection plug for the base element, surge voltage coarse protection for two signal lines grounded on one side.
PT-IQ-1X2-5DC-P - Surge protection plug
2800770
Surge protection plug with integrated multi-stage status indicator on the module for a 2-wire floating signal circuit. 5 V DC nominal voltage.
S-PT-2XEX-48DC - Surge protection device
2800038
Surge protection for two floating signal circuits in the screw-on module with IP67 degree of protection for sensor heads, connection: M20 x 1.5. Tested in accordance with the following types of protection in Ex areas: Ex d/Ex tD/Ex ia IIC/Ex iaD. Suitable for use in the fieldbus system in accordance with the FISCO concept. Can be used in safety-related circuits up to SIL 3.
PT 4X1-12DC-ST - Surge protection plug
2838319
Protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side. Nominal voltage: 12 V DC
PT 1X2-24AC/FM-ST - Surge protection plug
2920094
Surge protection plug with integrated diagnostic and status indicator on the module and remote indication contact for a 2-wire floating signal circuit.
S-PT-EX(I)-24DC-3/4" - Surge protection device
2882585
Surge protection in the IP67 screw-on module for measuring sensors in intrinsically safe circuits, direct mounting with 3/4'' NPT external thread, cable gland for the signal line, two-stage protective circuit. HART-compatible. Can be used in safety-related circuits up to SIL 3.
PT 2X1-12DC/FM-ST - Surge protection plug
2920117
Surge protection plug with integrated diagnostic and status indicator on the module and remote indication contact for two signal wires with common reference potential. Nominal voltage: 12 V DC
CTM 2X1- 5DC - Surge protection plug
2838571
LSA-PLUS plug (COMTRAB CTM) for 2-conductor signal circuits grounded on one side. Nominal voltage: 5 V DC
PT 4X1-OC-BE - Surge protection base-element
2800614
Base element for PT protective plug with protective circuit for four conductors of signal circuits grounded on one side, without bridge between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7,5 and NS 35/15, without coding, housing width: 17.5 mm
PT-IQ-4X1+F-48DC-UT - Surge protection device
2801220
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for four signal wires with common reference potential. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
PT-IQ-2X2+F-12DC-PT - Surge protection device
2801262
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two 2-wire floating signal circuits. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.
S-PT-2XEX-48DC-1/2" - Surge protection device
2800039
Surge protection for two floating signal circuits in the screw-on module with IP67 degree of protection for sensor heads, connection: ½ inch 14 NPT. Tested in accordance with the following types of protection in Ex areas: Ex d/Ex tD/Ex ia IIC/Ex iaD. Suitable for use in the fieldbus system in accordance with the FISCO concept. Can be used in safety-related circuits up to SIL 3.
S-PT-1X2-24DC-3/4" - Surge protection device
2882598
Surge protection in the IP67 screw-on module for measuring sensors, direct mounting with 3/4" NPT outer thread, cable gland for the signal line, two-stage protective circuit. HART-compatible. Can be used in safety-related circuits up to SIL 3.
TT-SLKK5 OHNE VAR - Housing
2788304
TERMITRAB-SLKK5 without varistor for individual mounting of other components.
PT-IQ-5-HF-12DC-UT - Surge protection device
2800799
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for five signal wires. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps). Can be used in safety-related circuits up to SIL 3.