Pilz PNOZ m1p ETH (773103) là Bộ điều khiển an toànPNOZmulti Classic, mở rộng được, 2 Ethernet / Modbus TCP, 20DI an toàn, 4 đầu ra bán dẫn an toàn, 2 đầu ra rơ le an toàn.
- Tài liệu kỹ thuật Pilz PNOZ m1p ETH | 773103 ở đây.
Thông số kỹ thuật chung của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Approval |
CE
UKCA
cULus Listed
KCC
KOSHA
EAC (Eurasian)
TÜV |
Thông số kỹ thuật cụ thể của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Thông số kỹ thuật về điện của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Purpose of U1 |
System supply |
Supply voltage (V) |
24 V |
Type of supply voltage U1 |
DC |
Purpose of U2 |
Supply of SC outputs |
Supply voltage 2 (V) |
24 V |
Type of supply voltage U2 |
DC |
Tolerance of U2 |
|
Potential isolation U2 |
Yes |
Thông số kỹ thuật đầu vào của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Number of digital inputs |
20 |
Max. no. live inputs |
U_B <= 26.4 V : 20
U_B > 26.4 V : 15 |
Signal level at input at 0 |
-3 - +5 VDC |
U input to EN 61131-2 Type 1 |
24 V DC |
Potential isolation input |
No |
Thông số kỹ thuật đầu ra bán dẫn của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Number of semicond. outputs |
4 |
Potential isolation of S/C O |
Yes |
S/C output short circuit proof |
Yes |
Thong số kỹ thuật đầu ra bán dẫn (standard) của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Number of auxiliary outputs |
1 |
Galv. isol. n/safe SC O |
Yes |
Short circ. prot. n/safe S/C O |
Yes |
Signal level at 1 n/safe S/C O |
UB - 0.5 VDC at 0.5 A |
Thông số kỹ thuật đầu ra Test clock của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Number of test pulse outputs |
4 |
Thông số kỹ thuật đầu ra rơ le của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Number of relay outputs |
2 |
Utilisation cat. AC/DC1 stand. |
EN 60947-4-1 |
Voltage AC1 safety cont. |
240 V |
Max. current AC1 safety cont. |
6 A |
Voltage DC1 safety cont. |
24 V |
Max. current DC1 safety cont. |
6 A |
Utilisation cat. AC15/DC13sta. |
EN 60947-5-1 |
Voltage AC15 safety cont. |
230 V |
Max. current AC15 safety cont. |
3 A |
Voltage DC13 safety cont. |
24 V |
Pot. isolation relay outputs |
Yes |
Thông số kỹ thuật đầu ra Cascading như đầu ra tiêu chuẩn của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Number of cascading outputs |
1 |
Galv. isol. casc. aux. S/C O |
No |
Thông số kỹ thuật giao diện CANopen của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Number of Ethernet interfaces |
2 |
Thông số kỹ thuật điều kiện môi trường khi vận hành của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Ambient temperature standard |
EN 60068-2-14 |
Ambient temperature |
0 - 60 °C |
Storage temperature standard |
EN 60068-2-1/-2 |
Climatic suitability standard |
EN 60068-2-30
EN 60068-2-78 |
Humidity rating |
93 % r. h. at 40 °C |
Condensation permitted? |
Not permitted |
Perm. operating height ASL |
2000 m |
EMC to standard ... |
EN 61131-2 |
Vibration to standard ... |
EN 60068-2-6 |
Acc. shock to standard1 |
15g |
Clearance & creepage dist. to |
EN 61131-2 |
Overvoltage category |
III |
Pollution degree clear.&creep. |
2 |
Protection type standard |
EN 60529 |
Protection type, mounting |
|
Protection type, housing |
|
Terminal protection type |
|
Thông số kỹ thuật về Potential separation của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Potential isolation 1 between |
SC output and system voltage |
Type of potential isolation 1 |
Safe separation |
Potential isolation 2 between |
RL output and system voltage |
Type of potential isolation 2 |
Safe separation |
Thông số kỹ thuật cơ học của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Mounting position |
horizontal on top hat rail |
DIN-rail dimensions |
35 x 7.5 EN 50022 |
Housing material lower section |
PPO UL 94 V0 |
Housing material front plate |
ABS UL 94 V0 |
Connection terminal |
Screw terminal
Spring-loaded terminal |
Flex. cond. c/s AWG info |
24 - 16 AWG |
Cond.flex AWG w/o crimp conn. |
24 - 12 AWG |
Height dimension |
94 mm |
Width dimension |
135 mm |
Depth dimension |
121 mm |
Net weight |
518 g |
Gross weight |
537 g |
Thông số an toàn môi trường của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
RoHS directive |
2011/65/EU
2015/863/EU |
RoHS conformity |
yes |
RoHS exceptions |
yes |
RoHS except.s acc. to direct. |
7a
6c
7c I |
REACh compliance |
contains min. 1 SVHC-substance |
REACh included substances |
Lead
Lead oxide |
%-part of the pollutant |
> 0,1 |
CAS No. |
7439-92-1
1317-36-8 |
WEEE classifikation (08/2018) |
5 devices (feed size < 50cm) |
SCIP entry available |
0 |
Thông số thương mại của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Harmonized System Code |
85371091 |
UNSPSC 25 |
39122331 |
EAN-Code |
4046548061239 |
ECLASS version |
ECLASS-13 |
ECLASS Reference Feature |
27242207 |
ETIM Version |
ETIM-9.0 |
ETIM Reference Group |
EG000024 |
ETIM Reference Feature |
EC000236 |
Volume |
1.680 dm3 |
Obligatory accessories của Mô-đun điều khiển an toàn Pilz PNOZ m1p ETH | 773103
Basic Licence for PNOZmulti Config.
773010B
Basic licence for the software PNOZmulti Configurator for using the full version on a workstation, licence key for enabling the full functionality.
Chipcard 1 piece 32kB
779211
PNOZmulti chip card, 1 piece, 32 kB.
PNOZ m1p/m0p plug in screw terminals7
93100
1 set of plug-in screw terminals, PNOZmulti Classic base units.
PNOZmulti Chipcard 1 piece 8kb
779201
PNOZmulti chip card, 1 piece, 8 kB.
PNOZ m1p Set spring loaded terminals783100
1 set of spring-loaded terminals for PNOZmulti Classic base units.
Optional accessories
Time lim Licence 3Mth for PNOZmulti Conf
773010R
Temporary licence for the software PNOZmulti Configuration for use of the full version on workstation. Includes a licence key for activating the full functionality for a period of three months. Attention: Does not include software. This can be downloaded from the Pilz homepage.
Time lim Licence 4Mth for PNOZmulti Conf
773010Q
Temporary licence for the software PNOZmulti Configuration for use of the full version on a workstation. Includes a licence key for activating the full functionality for a period of four months. Attention: Does not include software. This can be downloaded from the Pilz homepage.
PNOZmulti Chipcard Set 10 piece 8KB
779200
PNOZmulti chip card, set 10 pieces, 8 kB.
Lite Licence for PNOZmulti Config.
773010L
Lite licence PNOZmulti Configurator, full version with the limitation to PNOZmulti m0p and mm0p, for use on a workstation, licence key for enabling the full functionality within m0p and mm0p. Note: Does not contain software! You can load the softwarefrom the Pilz Homepage .
PNOZmulti Chipcard Set 10 pieces 32k
B779212
PNOZmulti chip card, set 10 pieces, 32 kB.
PNOZmulti Seal 12 pieces
779250
Label for chip card, small controllers PNOZmulti, 12 pieces.
PNOZmulti Chipcard Holder (Sparepart)
779240
Bracket for chip card, for PNOZmulti, PSSu H PN, PSSu WR, PSSu WB.
PNOZ Chip Card Reader
779230
Chip card reader for PNOZmulti, PNOZ s30, PSSu H PN, PSSu WR, PSSu WB.
PNOZmulti Tool Kit
779000
Accessories package in the case consists of: Chip card 32 kB, sealPNOZmulti m1p, PU = 10 pieces, chip card reader, programming cable PNOZmulti, system manual PNOZmulti.
PNOZmulti Bus-Terminator
779110
Terminator PNOZmulti.
User Upgr Licence for PNOZmulti Config
773010V
Upgrade licence PNOZmulti Configurator, to upgrade the version number of an existing user licence, licence key to enable the full functionality. Note: Does not contain software! You can load thesoftware from the Pilz Homepage .
Project Upgr Licence for PNOZmulti Serv
773011W
Upgrade licence for updating the version number of an existing project licence for the service version of the software PNOZmulti Configurator. Includes a licence key for activating the service functionality. Attention: Does not include software. This can be downloaded from the Pilz homepage.
Project Upgr Licence f. PNOZmulti Config
773010W
Upgrade licence for updating the version number of an present project licence for the full version of the software PNOZmulti Configurator. Includes a licence key for activating the full functionality. Attention: Does not include software. This can be downloaded from the Pilz homepage.
Basic Upgr Licence for PNOZmulti Service
773011U
Upgrade service licence PNOZmulti Configurator, to upgrade the version number of an existing basic service licence, licence key to enable the service functionality. Note: Does not contain software! You can load the software from the Pilz Homepage.
Basic Upgr Licence for PNOZmulti Config
773010U
Upgrade licence for upgrading the version number of an existing basic licence of the full version of the software PNOZmultiConfigurator, licence key for enabling the full functionality.
User Upgr Licence for PNOZmulti Service
773011V
Upgrade service licence PNOZmulti Configurator, to upgrade the version number of an existing user service licence, licence key to enable the service functionality. Note: Does not include software! You can load the software from the Pilz Homepage.
KOP-XE
774639
PNOZplus, PNOZpower, PNOZmulti coupling connector, replacement need.
Basic Licence for PNOZmulti Service
773011B
Basic service licence PNOZmulti Configurator, for using the service version on a workstation, licence key to enable the service functionality. Note: Does not include software! You can load thesoftware from the Pilz Homepage .
User Licence for PNOZmulti Service
773011K
User service licence PNOZmulti Configurator, for using the service version on an additional workstation, licence key to enable the service functionality. Note: Does not include software! You can load the software from the Pilz Homepage.
Lite Licence for PNOZmulti Service
773011L
Lite service licence PNOZmulti Configurator, for using the service version limited to PNOZmulti m0p and mm0p, for use on a workstation, licence key for enabling the service functionality. Note: Does not contain software! You can load thesoftware from the Pilz Homepage .
Project Licence for PNOZmulti Service
773011G
Project licence for the software PNOZmulti Configurator for use of the service version on one several work stations. Includes a licence key for activating the service functionality. Attention: Does not include software. This can be downloaded from the Pilz homepage.
Project Licence for PNOZmulti Config
773010G
Project licence for the software PNOZmulti Configurator for use of the full version on one several workstations. Includes a licence key for activating the the full functionality. Attention: Does not include software. This can be downloaded from the Pilz homepage.
Tham khảo thêm các model khác cùng loại, liên quan:
773110
PNOZ m0p base unit not expandablePhase-out article
Configurable safe small controllers PNOZmulti Classic, base unit, not expandable, (link modules, 1 fieldbus module conne ...
773113
PNOZ m0p ETHPhase-out article
Configurable safe small controllers PNOZmulti Classic, base unit, not expandable (link modules, 1 fieldbus module connec ...
773100
PNOZ m1p base unitPhase-out article
Configurable safe small controllers PNOZmulti Classic, base unit, expandable, serial interface RS232, 20 safe digital in ...
773105
PNOZ m1p base unit coated versionPhase-out article
Configurable safe small controllers PNOZmulti Classic, base unit, expandable, serial interface RS232, 20 safe digital in ...
773103
PNOZ m1p ETHPhase-out article
Configurable safe small controllers PNOZmulti Classic, base unit, expandable, 2 Ethernet / Modbus TCP interfaces, 20 saf ...
773104
PNOZ m1p ETH coated versionPhase-out article
Configurable safe small controllers PNOZmulti Classic, base unit, expandable, 2 Ethernet / Modbus TCP interfaces, 20 saf ...
773120
PNOZ m2p base module press functionPhase-out article
Configurable safe small controllers PNOZmulti Classic, base unit, expandable, with press functionality, ser. Interface R ...
773123
PNOZ m2p ETHPhase-out article
Configurable safe small controllers PNOZmulti Classic, base unit, expandable, with press functionality, 2 Ethernet / Mod ...
773125
PNOZ m3p base unit burner functionPhase-out article
Configurable safe small controllers PNOZmulti Classic, base unit, expandable, with burner functionality, interface RS232 ...
773126
PNOZ m3p ETHPhase-out article
Configurable safe small controllers PNOZmulti Classic, base unit, expandable, with burner functionality, 2 Ethernet / Mo ...
779000
PNOZmulti Tool KitPhase-out article
Accessories package in the case consists of: Chip card 32 kB, sealPNOZmulti m1p, PU = 10 pieces, chip card reader, progr ...
779213
USB Memory 512MB
USB memory, 512 MB, for PNOZ m B1, base unit PNOZmulti 2.
783100
PNOZ m1p Set spring loaded terminalsPhase-out article
1 set of spring-loaded terminals for PNOZmulti Classic base units.
783400
PNOZmulti Set spring loaded terminalsPhase-out article
1 set of spring-loaded terminals for PNOZmulti Classic expansion modules PNOZ mi1p/mi2p/mo1p/mo3p/ml1p.
793536
PNOZ mo4p Set plug in screw terminals
Plug-in screw terminals, PNOZ mo4p, PNOZ mo5p, 1 set.
793400
PNOZ mi1p/mi2p/mo1p screw terminals
1 set of plug-in screw terminals, PNOZ mi1p, PNOZ mi2p, PNOZ mo1p, PNOZ mo3p, PNOZ ml1p.
793700
PNOZ mc1p Set plug in screw terminals
Plug-in screw terminals, PNOZ mc1p, PNOZ ma1p, 1 set.
751016
Set4 Spring Terminals
Set of spring-loaded terminals for PNOZ m B1, base unit, smallcontrollers PNOZmulti 2.
779211
Chipcard 1 piece 32kB
PNOZmulti chip card, 1 piece, 32 kB.
305160
PSS Conv USB / RS 232
Adapter for implementing the USB interface on RS232.
535130
PSEN im1
Interfaces PSEN im1 for connecting and evaluating several pressure-sensitive safety mats to the PNOZmulti system, 96 x 4 ...
773839
PNOZ msi1 Bp Adapter Si/Ha 25/25 5m
Adapter for PNOZ ms1p / PNOZ ms2p for Siemens/Heidenhain encoder,25-pin, 5 m, cable outlet right-hand side, for Siemens ...
773841
PNOZ msi1Bp Adapter Si/Ha 25/25 2,5m
Adapter for PNOZ ms1p / PNOZ ms2p for Siemens/Heidenhain encoder,25-pin, 2.5 m, cable outlet right-hand side, for Siemen ...
773840
PNOZ msi1Ap Adapter Si/Ha 25/25 2,5m
Adapter for PNOZ ms1p / PNOZ ms2p for Siemens/Heidenhain encoder, 2.5 m.
773842
PNOZ msi3Ap Adapter Si/Ha 15/15 2,5m
Adapter for PNOZ ms1p / PNOZ ms2p for Siemens/Heidenhain encoder,15-pin, 2.5 m, cable outlet left-hand side for Siemens ...
773855
PNOZ msi11p Adapter Cable 1,5m
Adapter cable speed monitor, RJ45 connector and open end, for PNOZ msXp and PNOZ s30, 1.5 m.
773857
PNOZ msi5p Adapter Bo/Rex 15/15 2,5m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 2.5 m, for Bosch ...
773872
PNOZ msi S025
Universal adapter, 25-pin D-Sub, for PNOZ msXp, PNOZ s30, PNOZmulti 2 speed monitor and PSS motion monitoring.
773874
PNOZ msi15p Adapter Tendo 15/15 2,5m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 2.5 m, for PMCten ...
773859
PNOZ msi6p Adapter Elau 9/9 7,5m
Adapter cable speed monitor, RJ45 connector and 9-pin encoderconnection, for PNOZ msXp and PNOZ s30, 7.5 m, for ELAU.
773854
PNOZ msi10p Adapter Cable 2,5m
Adapter cable speed monitor, RJ45 connector and open end, for PNOZ msXp and PNOZ s30, 2.5 m.
773858
PNOZ msi5p Adapter Bo/Rex 15/15 1,5m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 1.5 m, for Bosch ...
773867
PNOZ msi16p ADAPTER Baumuell 15/15 2,5m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 2.5 m, for Baumül ...
773863
PNOZ msi8p Adapter Lenze 9/9 1,5m
Adapter cable speed monitor, RJ45 connector and 9-pin encoderconnection, for PNOZ msXp and PNOZ s30, 1.5 m, for Lenze.
773860
PNOZ msi6p Adapter Elau 9/9 2,5m
Adapter cable speed monitor, RJ45 connector and 9-pin encoderconnection, for PNOZ msXp and PNOZ s30, 2.5 m, for ELAU.
773856
PNOZ msi 9p adapter cable 5m
Adapter cable speed monitor, RJ45 connector and open end, for PNOZ msXp and PNOZ s30, 5 m.
773843
PNOZ msi3Bp Adapter Si/Ha 15/15 2,5m
Adapter for PNOZ ms1p / PNOZ ms2p for Siemens/Heidenhain encoder,15-pin, 2.5 m, cable outlet right-hand side, for Siemen ...
773868
PNOZ msi12p Rockwell 15/15 2,5m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 2.5 m, for Rockwe ...
773865
PNOZ msi7p Adapter SEW 15/15 1,5m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 1.5 m, for SEW.
773845
PNOZ msi b4 Box Accessories
Shielded connection box PSEN msi b4, for connecting an incremental encoder to a proximity switch, with/without pull resi ...
773866
PNOZ msi4Bp Adapter SMC30 15/15 1,5m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 1.5 m, for SMC30.
773864
PNOZ msi7p Adapter SEW 15/15 2,5m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 2.5 m, for SEW.
773861
PNOZ msi6p Adapter Elau 9/9 1,5m
Adapter cable speed monitor, RJ45 connector and 9-pin encoderconnection, for PNOZ msXp and PNOZ s30, 1.5 m, for ELAU.
773871
PNOZ msi S15
Universal adapter, 15-pin D-Sub, for PNOZ msXp, PNOZ s30, PNOZmulti 2 speed monitor and PSS motion monitoring.
773870
PNOZ msi S09
Universal adapter, 9-pin D-Sub, for PNOZ msXp, PNOZ s30, PNOZmulti 2 speed monitor and PSS motion monitoring.
773844
PNOZ msi1AP Adapter Si/Ha 25/25 5m
Adapter for PNOZ ms1p / PNOZ ms2p for Siemens/Heidenhain encoder,25-pin, 5 m, cable outlet left-hand side for Siemens He ...
773869
PNOZ msi13p Fanuc 20/20 2,5m
Adapter cable speed monitor, RJ45 connector and 20-pin encoder connection, for PNOZ msXp and PNOZ s30, 2.5 m, for FANUC.
773862
PNOZ msi8p Adapter Lenze 9/9 2,5m
Adapter cable speed monitor, RJ45 connector and 9-pin encoderconnection, for PNOZ msXp and PNOZ s30, 2.5 m, for Lenze.
773882
PNOZ msi b1 Box 9p
Adapter box for speed monitoring module, PNOZmulti Classic, 3 x 9-pin D-Sub connector, 2 x socket, 1 x connector, can be ...
773891
PNOZ mli1p 10m screwPhase-out article
Cable for safe connection of 2 PNOZ ml1p, 5-pin shielded, plug-in screw terminals, 10 m.
773890
PNOZ mli1p 5m screwPhase-out article
Cable for safe connection of 2 PNOZ ml1p, 5-pin shielded, plug-in screw terminals, 5 m.
773893
PNOZ mli1p 5m springPhase-out article
Cable for safe connection of 2 PNOZ ml1p, 5-pin shielded, spring-loaded terminal, 5 m.
773880
PNOZ msi b1 Box 15p
Adapter box for speed monitoring module, PNOZmulti Classic, 3 x 15- pin D-Sub connector, 2 x socket, 1 x connector, can ...
773881
PNOZ msi b0 cable 15/RJ45
Cable with 15-pin, D-Sub connector for adapter box PNOZ msi b1 (773880), cable length 0.3 m.
773892
PNOZ mli1p 50m screwPhase-out article
Cable for safe connection of 2 PNOZ ml1p, 5-pin shielded, plug-in screw terminals, 50 m.
773884
PNOZ msi b0 cable 25/RJ45
Cable with 25-pin, D-Sub connector for adapter box PNOZ msi b1 (773883), cable length 2.5 m.
773877
PNOZ MSI1BP ADAPTER SI/HE 25/25 1,5M
Adapter for PNOZ ms1p / PNOZ ms2p for Siemens/Heidenhain encoder,25-pin, 1,5 m, cable outlet right-hand side.
773894
PNOZ mli1p 10m springPhase-out article
Cable for safe connection of 2 PNOZ ml1p, 5-pin shielded, spring-loaded terminal, 10 m.
773895
PNOZ mli1p 50m springPhase-out article
Cable for safe connection of 2 PNOZ ml1p, 5-pin shielded, spring-loaded terminal, 50 m.
773883
PNOZ msi b1 Box 25p
Adapter box for speed monitoring module, PNOZmulti Classic, 3 x 25- pin D-Sub connector, 2 x socket, 1 x connector, can ...
773897
PNOZ mli1p 1,5m screwPhase-out article
Cable for safe connection of 2 PNOZ ml1p, 5-pin shielded, plug-in screw terminals, 1.5 m.
773878
PNOZ msi14p Leroy 15/15 2,5m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 2.5 m, for Leroy.
773875
PNOZ msi17p Bos/Rex 15/15 5,0m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 5 m, for Bosch Re ...
773896
PNOZ mli1p 1,5m springPhase-out article
Cable for safe connection of 2 PNOZ ml1p, 5-pin shielded, spring-loaded terminal, 1.5 m.
773876
PNOZ MSI1AP ADAPTER SI/HE 25/25 1,5M
Adapter for PNOZ ms1p / PNOZ ms2p for Siemens/Heidenhain encoder,25-pin, 1.5 m, cable outlet left-hand side.
783800
PNOZms1p Set spring loaded terminals
Spring-loaded terminals, PNOZ ms1p, PNOZm2p, 1 set.
779200
PNOZmulti Chipcard Set 10 piece 8KB
PNOZmulti chip card, set 10 pieces, 8 kB.
783700
PNOZ mc1p Set spring loaded terminals
Spring-loaded terminals, PNOZ mc1p, PNOZ ma1p, 1 set.
779240
PNOZmulti Chipcard Holder (Sparepart)
Bracket for chip card, for PNOZmulti, PSSu H PN, PSSu WR, PSSu WB.
779250
PNOZmulti Seal 12 pieces
Label for chip card, small controllers PNOZmulti, 12 pieces.
783520
PNOZ mo2p Set spring loaded terminals
Spring-loaded terminals, PNOZ mo2p, 1 set.
779201
PNOZmulti Chipcard 1 piece 8kb
PNOZmulti chip card, 1 piece, 8 kB.
779112
PNOZmulti Bus-Terminator coated
Terminator PNOZmulti, coated version.
779212
PNOZmulti Chipcard Set 10 pieces 32kB
PNOZmulti chip card, set 10 pieces, 32 kB.
779230
PNOZ Chip Card Reader
Chip card reader for PNOZmulti, PNOZ s30, PSSu H PN, PSSu WR, PSSu WB.
783536
PNOZ mo4p Set spring loaded terminals
1 set of spring-loaded terminals, PNOZ mo4p/mo5p.
779110
PNOZmulti Bus-TerminatorPhase-out article
Terminator PNOZmulti.
783801
PNOZms1p 10 Set spring loaded terminals
Spring-loaded terminals, PNOZms1p, 10 sets.
774639
KOP-XE
PNOZplus, PNOZpower, PNOZmulti coupling connector, replacement need.
793100
PNOZ m1p/m0p plug in screw terminalsPhase-out article
1 set of plug-in screw terminals, PNOZmulti Classic base units.
793801
PNOZms1p 10 Set plug in screw terminalsPhase-out article
Plug-in screw terminals, PNOZ ms1p, 10 sets.
793520
PNOZ mo2p Set plug in screw terminals
Plug-in screw terminals, PNOZ mo2p, 1 set.
793800
PNOZms1p/ms2p Set plug in screw termsPhase-out article
Plug-in screw terminals, PNOZ ms1p, PNOZ ms2p, 1 set.
783543
Spring terminals PNOZ mmcxp, 10 pcs.
Spring-loaded terminals, for fieldbus modules on PNOZ mm0.xp, 10 sets.
773873
PNOZ MSI6P ADAPTER ELAU 9/9 4 m
Adapter cable speed monitor, RJ45 connector and 9-pin encoderconnection, for PNOZ msXp and PNOZ s30, 4 m, for ELAU.
779260
PNOZ mm0.xp connector left (10 pcs)
Connector for connecting the modules on the left-hand side of the base unit PNOZmulti, yellow/black (10 pieces).
783542
Spring terminals PNOZ mmcxp, 1 pc.
Spring-loaded terminals, for fieldbus modules on PNOZ mm0.xp, 1 set.
783540
Spring terminals PNOZ mml2p
Spring-loaded terminals, PNOZ mml2p, 1 set.
793542
Screw terminals PNOZ mmcxp, 1 pc.
Plug-in screw terminal, fieldbus modules on PNOZ mm0.xp, 1 set.
793543
Screw terminals PNOZ mmcxp, 10 pcs.
Plug-in screw terminal, fieldbus modules on PNOZ mm0.xp, 10 sets.
783538
Spring terminals PNOZ mmc2p, mml1p 1 pc.
Spring-loaded terminals, PNOZ mmc2p, PNOZ mml1p, 1 set.
793538
Screw terminals PNOZ mmc2p, mml1p 1 pc.
Plug-in screw terminals, PNOZ mmc2p, PNOZ mml1p, 1 set.
793539
Screw terminals PNOZ mmc2p,mml1p 10 pcs.
Plug-in screw terminals, PNOZ mmc2p, PNOZ mml1p, 10 sets.
793541
Screw terminals PNOZ mml2p 10 pcs.
Plug-in screw terminals, PNOZ mml2p, 10 sets.
793540
Screw terminals PNOZ mml2p
Plug-in screw terminals, PNOZ mml2p, 1 set.
779126
PNOZmulti accessory packagePhase-out article
Accessories package, set of plug-in spring-loaded terminals PNOZmulticlassic and PNOZmulti chip card 32 kB, PU = 1 piece ...
772800
PNOZmulti Mini accessory packagePhase-out article
Accessories package, set of plug-in spring-loaded terminals, 8-pin, PU =each 1 piece X1, X2, X3, X4, and PNOZmulti chip ...
773879
PNOZ MSI20P PARKER HD 15/15 2,5M
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 2.5 m, for PARKER ...
783544
Spring terminals PNOZ 2MM 1 set
Spring-loaded terminals, PNOZmulti 2 Motion Monitoring module 2MM, 1set.
783545
Spring terminals PNOZ 2MM 10 sets
Spring-loaded terminals, PNOZmulti 2 Motion Monitoring module 2MM, 10sets.
793545
Screw terminals PNOZ 2MM 10 sets
Plug-in screw terminals, PNOZmulti 2 Motion Monitoring 2MM, 10 sets.
793544
Screw terminals PNOZ 2MM 1 set
Plug-in screw terminal, PNOZmulti 2 Motion Monitoring 2MM, 1 set.
773848
PNOZ msi4Bp Adapter SMC30 15/15 5,0m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 5 m, for SMC30.
773849
PNOZ msi4Bp Adapter SMC30 15/15 2,5m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 2.5 m, for SMC30.
773885
PNOZ msi21p Adapter Bos/Rex 15/15 2,5m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 2.5 m, for Bosch ...
773888
PNOZ msi18p Adapter Bos/Rex 15/15 1,5m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 1.5 m, for Bosch ...
773886
PNOZ msi21p Adapter Bos/Rex 15/15 1,5m
Adapter cable speed monitor, RJ45 connector and 15-pin encoder connection, for PNOZ msXp and PNOZ s30, 1.5 m, for Bosch ...
750016
Set4 Screw Terminals
Set of plug-in screw terminals for PNOZ m B1, base unit, smallcontrollers PNOZmulti 2.
773832
PNOZ MSI22AP ADAPTER B&R ACOPOS 2,5m
Adapter for PNOZ s30 for B & R/Hiperface encoder, 2.5 m.
779261
PNOZ mm0.xp terminator left (10 pcs.)
Terminator on the left-hand side of the base unit PNOZmulti, yellow/black (10 pieces).
773847
PNOZ MSI19P ADAPTER ELAU PACDrive3 2,5m
PNOZ MSI9P ADAPTER ELAU PACDrive3 2.5 m, adapter cable for speed monitoring on ELAU PACDrive3.
773846
PNOZ MSI19P ADAPTER ELAU PACDrive3 1,5m
PNOZ MSI9P ADAPTER ELAU PACDrive3 1.5 m, adapter cable for speed monitoring on ELAU PACDrive3.
783541
Spring terminals PNOZ mml2p 10 pcs.
Spring-loaded terminals, PNOZ mml2p, 10 sets.
783539
Spring terminals PNOZ mmc2p,mml1p 10 pcs
Spring-loaded terminals, PNOZ mmc2p, PNOZ mml1p, 10 sets.
783537
PNOZ mo4p 10 Set spring loaded terminals
10 sets of spring-loaded terminals for PNOZ mo4p/mo5p.
793537
PNOZ mo4p 10 Set plug in screw terminals
10 sets of screw terminals for PNOZ mo4p and PNOZ mo5p.