Relay kiếng Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668 | 220VAC 2PDT 10A

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Full Video về Sự khác nhau giữa Contactor và Relay

• 

  Rờ le giám sát dòng Siemens SIRIUS 3RR24 cho 3RT2

• Xem thêm

Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668 là Relay kiếng 220VAC, 2 cặp tiếp điểm, test key, 10A

Plug-in industrial relay with power contacts, 2 PDTs, test key, status LED, mechanical switch position indicator, input voltage: 230 V AC
 

Your advantages của Relay kiếng Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668

Dimensions của Relay kiếng Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668

Width	21.2 mm
Height	35.6 mm
Depth	27.5 mm

 

Ambient conditions  của Relay kiếng Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668

Ambient temperature (operation)	-40 °C ... 55 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C

 

Coil side  của Relay kiếng Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668

Nominal input voltage UN	230 V AC
Input voltage range in reference to UN	see diagram
Mains frequency	50 Hz
	60 Hz
Typical input current at UN	6.5 mA
Typical response time	5 ms ... 15 ms (depending on phase relation)
Typical release time range	5 ms ... 20 ms (depending on phase relation)
Status display	Yellow LED
Power dissipation for nominal condition	1.5 W

 

Contact side  của Relay kiếng Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668

Contact type	2 PDT
Type of switch contact	Single contact
Contact material	AgNi
Maximum switching voltage	250 V AC/DC
Minimum switching voltage	5 V (At 24 mA)
Min. switching current	5 mA (at 24 V)
Maximum inrush current	30 A (20 ms, N/O contact)
Limiting continuous current	12 A
Interrupting rating (ohmic load) max.	288 W (at 24 V DC)
	124 W (at 48 V DC)
	108 W (at 60 V DC)
	52 W (at 110 V DC)
	48 W (at 220 V DC)
	3000 VA (for 250 V AC)
Switching capacity min.	0.12 W
Switching capacity in acc. with DIN VDE 0660/IEC 60947	2 A (at 24 V, DC13)
	0.22 A (at 120 V, DC13)
	0.11 A (at 250 V, DC13)
	3 A (at 120 V, AC15)
	1.5 A (at 240 V, AC15)

 

General  của Relay kiếng Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668

Test voltage relay winding/relay contact	2.5 kVrms (50 Hz, 1 min.)
Test voltage relay contact/relay contact	2.5 kVrms (50 Hz, 1 min.)
Test voltage PDT/PDT	2.5 kVrms (50 Hz, 1 min.)
Operating mode	100% operating factor
Degree of protection	RT I
Mechanical service life	Approx. 2x 107 cycles
Mounting position	any

 

Standards and Regulations  của Relay kiếng Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668

Connection in acc. with standard	CSA
Standards/regulations	IEC 60664
	IEC 61810
Rated insulation voltage	250 V AC
Rated surge voltage	4 kV
Insulation	Basic insulation
Degree of pollution	3
Overvoltage category	III

 

Environmental Product Compliance  của Relay kiếng Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668

China RoHS	Environmentally Friendly Use Period = 50
	For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

 

Classifications  của Relay kiếng Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668

eCl@ss

eCl@ss 5.0	27371601
eCl@ss 5.1	27371601
eCl@ss 6.0	27371601
eCl@ss 7.0	27371601
eCl@ss 8.0	27371601
eCl@ss 9.0	27371601

 

ETIM  của Relay kiếng Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668

ETIM 2.0	EC001437
ETIM 3.0	EC001437
ETIM 4.0	EC001437
ETIM 5.0	EC001437
ETIM 6.0	EC001437

 

UNSPSC  của Relay kiếng Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668

UNSPSC 6.01	30211916
UNSPSC 7.0901	39121515
UNSPSC 11	39121515
UNSPSC 12.01	39121515
UNSPSC 13.2	39122334

 

Approvals  của Relay kiếng Phoenix Contact REL-IR2/L-230AC/2X21 - 2903668