Pilz PMD s10 24-240VACDC | 760100 | True power monitoring device -Thiết bị đo giám sát công suất thực Màn hình cài đặt Lưu chip card 2-Changeover contacts 4-20mA 0-10VDC 24-240V AC/DC 100-550VAC 1-12A

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PILZ

• 

  Full Video về Sự khác nhau giữa Contactor và Relay

• 

  Rờ le giám sát dòng Siemens SIRIUS 3RR24 cho 3RT2

• Xem thêm

Thiết bị đo giám sát công suất thực  Pilz PMD s10 24-240VACDC | 760100 | True power monitoring device

(Màn hình cài đặt Lưu chip card 2-Changeover contacts 4-20mA 0-10VDC 24-240V AC/DC 100-550VAC 1-12A)

True power monitoring device for measuring and monitoring the true power of electrical loads, limit values that can be set via display, can be saved to chip card,relay output: 2 changeover contacts, analogue output: 4 - 20 mA and 0 - 10 V DC operating voltage: 24 - 240 V AC/DC, measuring voltage: 100 - 550 V AC, measuring current: 1 - 12 A, screw terminals.
 

General data

Approval

CE   cULus Listed

 

Technical data

Electrical data

Supply voltage (V)	24 - 240  V
Type of supply voltage U1	AC/DC
Power consumption AC	5  VA
Power consumption DC	3  W
Max. device circuit breaker	Max. conductor cross section

 

Measuring circuit

U meas. range analogue input	100 - 550  V
I meas. range analogue input	1 - 12  A
Freq. meas. range analog i/p	0, 15 - 400 Hz

 

Output signals during motor operation

Uout during motor mode 10-0 V

10 - 0 V

 

Output signals during generator operation

Uout during generator mode	0 - -10 V
Iout during generator mode	0 - -20 mA

 

Relay outputs

Utilisation cat. AC/DC1 stand.	EN 60947-4-1
Utilisation cat. AC15/DC13sta.	EN 60947-5-1
Safety contacts: AC at UL	240 VAC G. U.
Relay contact material	AgNi10

 

Environmental data

Climatic suitability to ...	EN 60068-2-78
Ambient temperature	-10 - 55  °C
Condensation permitted?	Not permitted
EMC to standard ...	EN 61000-6-2   EN 61000-6-4
Vibration to standard ...	EN 60068-2-6
Clearance & creepage dist. to	EN 60664-1
Overvoltage category	III / II
Pollution degree clear.&creep.	2
Protection type, mounting
Protection type, housing
Terminal protection type

 

Times

React.time analog o/p 15-60 Hz

70 - 16 ms

 

Mechanical data

Mounting position	any
Housing material lower section	PC
Housing material front plate	PC
Housing material upper part	PC
Connection terminal	Screw terminal
Terminal style	plug-in
Flex. cond. c/s AWG info	24 - 12 AWG
Height dimension	98  mm
Width dimension	45  mm
Depth dimension	120  mm
Net weight	340  g
Gross weight	350  g

- Xem chi tiết Tài liệu kỹ thuật/ Datasheet Pilz PMD s10 24-240VACDC | 760100 ở đây.


Tham khảo thêm các Model khác cùng loại:

760100
PMD s10 24-240VACDC

Please note that the housing colour has c ...
True power monitoring device for measuring and monitoring the true power of electrical loads, limit values that can be s ...
 

761100
PMD s10 C 24-240VACDC

Please note that the housing colour has c ...
True power monitor, Sigma housing, for monitoring underload and overload, limit values can be set via display, can besto ...
 

761120
PMD s20 C 24-240VAC/DC 10-200k / 2U

Please note that the housing colour has c ...
Insulation monitor, Sigma housing, for monitoring the insulation in galvanically isolated networks, limit values can be ...
 

760120
PMD s20 24-240VAC/DC 10-200k / 2U

Please note that the housing colour has c ...
Insulation monitor, Sigma housing, for monitoring the insulation in galvanically isolated networks, limit values can be ...