dienelectrics@gmail.com
0909186879 dienelectrics@gmail.com
SINAMICS G180 are compact devices, cabinet systems and cabinet units (air and liquid cooled) for variable-speed drives in plant and machinery construction; which have been specifically designed for applications in oil and gas, the chemical and process industries. They have been specially developed to address the requirements of drives with square law and constant load characteristics.
SINAMICS G180 represents the optimum drive solution that can be adapted to the various sector-specific requirements in the core sectors using a wide range of options and X options (special, customer-specific options).
SINAMICS G180 can be flexibly integrated into any automation concept, either using conventional control or via a bus system.
All of the drive requirements – from the motor through the converter transformer, cabling, converter, line conditions and link to the supervisory control level – are taken into consideration from the very start.
|
Brief overview |
|
|
|---|---|---|
|
Electrical data |
Basic connection |
|
|
Line voltages: |
Line system types: |
Output range: |
|
Voltage tolerance: |
-15 / +10 % |
|
Line frequency: |
47 to 63 Hz |
|
Output frequency: |
0 to 250 Hz (dependent on the power) |
|
Line cos phi: |
Approx. 0,99 |
|
Voltage rise at the motor: |
Typically, 500 ... 1000 V/µs, however < 1500 V/µs |
|
Motor cable lengths |
Depending on the type: 100 m up to 350 m for standard motor winding insulation systems |
|
Control modes: |
Vector control with encoder or U/f control |
|
Fixed speeds: |
3 fixed speeds + 1 minimum speed, parameterizable |
|
Skippable speed ranges: |
2, parameterizable |
|
Customer terminal strip: |
Terminal designations according to NAMUR recommendation NE37 |
|
Communication interface: |
Optionally available: |
|
Braking mode: |
Braking torque using over-saturation control |
|
Degree of protection: |
Compact units: IP20 (optional IP21) |
|
Cooling method: |
Air cooling: Forced air cooling AF according to EN 60146 |
|
Sound pressure level: |
Dependent on the power: 60 - 78 dB (A) at 50 Hz line frequency |
|
Cabinet system: |
Rittal TS 8 |
|
Compliance with standards: |
CE acc. to EMC Directive No. 2004/108/EC and |
|
Software functions: |
Autotuning function |
|
Protection functions: |
Ground fault monitoring at the output |
|
Safety functions: |
Optional STO (Integrated safety functions with drives) |
|
Motors that can be connected: |
Induction motors, Explosion-proof motors |
SINAMICS G180 are designed for operation with explosion-proof motors and optimized for EEx n, EEx e and EEx d types of protection.
- Integrated du/dt filter at the converter output
- Line filter at the converter input
- NAMUR terminals according to NE 37
- PELV (protective separation) according to IEC/EN 61800-5-1
- Insulation monitoring for 500 V & 690 V devices (IT line systems)
- Ex protection: ATEX-certified for motors in hazardous zones
- A main contactor can be eliminated (according to Directive 94/9 EC)
High level of protection for personnel and equipment is provided through protective separation of the safety extra-low voltage in accordance with IEC/EN 61800‑5‑1 at the analog and digital control inputs and outputs of the power unit.
- Communication via conventional terminal strip with freely programmable digital and analog inputs/outputs.
- Communication and parameter assignment using - PC with IMS (Inverter Management Software) via USB port
- External/internal operator panel
- Bus systems, such as Ethernet, PROFIBUS DP, CANopen or Modbus RTU or Modbus TCP
- Two control modes for induction motors:
Space vector control for standard applications (without feedback)
Field-orientated control to address dynamic requirements.
- Optimum braking without any supplementary equipment based on an oversaturation control system. With approximately 10% braking torque at high speeds and up to 50 % at low to mid-range speeds.
- Automatic slip compensation
- Stall protection provided by current limitation control
- Flying restart function for connection to rotating motor
- Parameterizable DC braking for precise deceleration/braking down to zero speed
- Torque control
- Automatic restart (auto restart)
- Integrated process controller for basic, higher-level closed-loop control tasks
- System losses are reduced as a result of the optimized clock cycle frequency
- The "random pattern" function significantly reduces motor noise.
- Short, straightforward commissioning and parameterization using the IMS (Inverter Management Software) commissioning tool
- All devices have a specific connection area
- The integrated du/dt filter allows long motor cables to be used
- Wide input voltage range
- Devices with 500 V and 690 V rated voltage are suitable for operation on ungrounded line supplies (IT line systems)
- ATEX-certified for motors in hazardous zones
- Petrochemical industry
- Power and utility industries
- Test stand systems
- Conveyor systems
- General machinery construction applications
- Branch Chemical Industry
