150-C25NBD Allen-Bradley SMC-3 Smart Motor Controller Khởi động mềm 3-wire 25A 480V 3-Phase 100-240VAC

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm ALLEN-BRADLEY

• 

  Các model Khởi động mềm Allen Bradley Soft starters Motor controllers

• 

  Các model Khởi động mềm Siemens 3RW50 | Siemens 3RW50 soft starters

• Xem thêm

Chi tiết thông tin đặc tính sản phẩm

150-C25NBD Allen-Bradley SMC-3 Smart Motor Controller Khởi động mềm 3-wire 25A 480V 3-Phase 100-240VAC

SMC-3, 3-Wire, Open Type, 201A, 480V, 3-Phase, 50/60Hz Max, Control Voltage 100-240V AC

 

Product Details SMC3 Controller

- Frame size 1: 45mm wide, 3 phase control facilitating true soft start capability up to 20kW
- Frame size 2: 72mm wide, 3 phase control facilitating true soft start capability up to 45kW
- Built in DIP switch-selectable electronic overload protection (Trip class 10, 15 or 20)
- Adjustable overload setting by means of rotary dial
- Built-in bypass
- Designed for full integration with the Allen-Bradley MCS range
- Seven ratings covering 3A to 37A
- Two control voltage ratings: 24Vac/dc and 100V to 240Vac. 50/60Hz over to 0 to 40°C
- DIP switch-selectable starting methods: soft start 2 to 15 seconds, current, limit, kick-start
- DIP switch-selectable stopping methods: soft stop 100%, 200% or 300% of start time, coast to rest
- Phase rotation checking
- Fault detection
- Phase loss/open line/load loss, Shorted SCR, Open gate, Over temperature - power section
- Phase unbalance - 15% of line rating, Overload, Phase reversal - pre-start only
- Fault indication; LED for power 'On' and fault indication



 

Cảnh báo/ Caution

-  kW ratings based on current limit value of 350%. Product should always be selected by Motor Full Load Current

 

Allen Bradley

Soft starters were developed to overcome the drawbacks of direct on line (DOL) and star-delta starting of single and three phase a.c. induction motors, such as high starting currents, voltage peaks and mechanical snatch.,Soft starters achieve these benefits by controlling the voltage applied to the motor at starting, giving a reduced but controlled starting current and torque to meet the requirements of the motor-driven load. From this starting value the voltage is gradually increased to full value via adjustable ramp times.,Typical applications that would benefit from the use of soft starters include conveyor belts, pumps, mechanical handling equipment, air conditioning systems, compressors, grain dryers and fans.,In addition to the above the installation of a soft starter provides the following major advantages:

- Reduced starting torque minimising stress on motor, bearings, drive belts and chains
- Prolonged equipment life and reduced maintenance
- Minimises voltage dip problems which may affect sensitive electronic equipment on site
- Energy saving through reduced peak kVA
- Allows minimum cable conductor size
- Elimination of high current transients: when a 3-phase motor switches from Star to Delta

 

Thông số kỹ thuật/ Specifications

Attribute	Value
Phase	3
Supply Voltage	200 → 460 V ac
Current Rating	25 A
Voltage Rating	460 V ac
Control Voltage	100 → 240 V ac
Power Rating	11 kW
IP Rating	IP2X
Overall Length	100mm
Overall Width	44.8mm
Overall Depth	139.7mm
Minimum Operating Temperature	-5°C
Maximum Operating Temperature	+50°C
Series	SMC-3

 

- Xem chi tiết Tài liệu kỹ thuật/ Datasheet Khởi động mềm SMC-3 Smart Motor Controller 150-C25NBD Allen-Bradley