Trang chủ » Drive-Control » Khởi động mềm | Soft Starters

Khởi động mềm Soft starter - Schneider - Soft Start Altistart 48 ATS48C21Q

2,608

Nhà sản xuất:

Schneider Electric

;

Xuất xứ: France

Giá sỉ:

Giá tốt nhất xem...0909186879 dienelectrics@gmail.com

Khuyến mãi:Có Discount

Bảo hành:12 Tháng (Chính hãng)

Thanh toán:C.O.D / Bảo lãnh TT / Link hoạt

Vận chuyển:Miễn phí Tp.HCM, vùng lân cận

Thông tin nổi bật

Khởi động mềm Schneider, Soft starter for asynchronous motor - ATS48 - 195 A - 230..415 V - 45..160 KW

THÔNG TIN THAM KHẢO

Chi tiết thông tin đặc tính sản phẩm

Khởi động mềm Soft starter - Schneider - Soft Start Altistart 48 ATS48C21Q

Thông tin chính yếu

range of product	Altistart 48
product or component type	Soft starter
product destination	Asynchronous motors
product specific application	Heavy duty industry and pumps
device short name	ATS48
[Us] rated supply voltage	230...415 V (- 15...10 %)
motor power kW	55 kW at 230 V (connection in the motor supply line) for standard applications 90 kW at 230 V (connection to the motor delta terminals) for severe applications 90 kW at 400 V (connection in the motor supply line) for severe applications 110 kW at 230 V (connection to the motor delta terminals) for standard applications 110 kW at 400 V (connection in the motor supply line) for standard applications 132 kW at 400 V (connection to the motor delta terminals) for severe applications 160 kW at 400 V (connection to the motor delta terminals) for standard applications 45 kW at 230 V (connection in the motor supply line) for severe applications
power dissipation in W	For severe applications 468 W For standard applications 580 W
utilisation category	AC-53A
type of start	Start with torque control (current limited to 5 In)
IcL starter rating	210 A (connection in the motor supply line) for severe applications 364 A (connection to the motor delta terminals) for severe applications 364 A (connection to the motor delta terminals) for standard applications 210 A (connection in the motor supply line) for standard applications
IP degree of protection	IP00

Thông tin bổ sung
assembly style	With heat sink
function available	External bypass (optional)
supply voltage limits	195...456 V
supply frequency	50...60 Hz (- 5...5 %)
network frequency	47.5...63 Hz
device connection	In the motor supply line To the motor delta terminals
factory setting current	195 A
[Uc] control circuit voltage	220 - 15 % to 415 + 10 %, 50/60 Hz
control circuit consumption	50 W
discrete output number	2
discrete output type	(LO1) logic output 0 V common configurable (LO2) logic output 0 V common configurable (R1) relay outputs fault relay NO (R2) relay outputs end of starting relay NO (R3) relay outputs motor powered NO
output absolute accuracy precision	+/- 5 %
minimum switching current	Relay outputs 10 mA at 6 V DC
maximum switching current	Logic output 0.2 A at 30 V DC Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5, L/R = 20 ms Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5, L/R = 20 ms
discrete input number	5
discrete input type	PTC, 750 Ohm at 25 °C (Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
discrete input voltage	24 V (<= 30 V)
discrete input logic	Positive logic (Stop, Run, LI3, LI4) state 0 < 5 V and <= 2 mA, state 1 > 11 V and >= 5 mA
supply inrush current	Adjustable 0.4...1.3 Icl
analogue output type	(AO) current output 0-20 mA or 4-20 mA <= 500 Ohm
communication port protocol	Modbus
connector type	1 RJ45
communication data link	Serial
physical interface	RS485 multidrop
transmission rate	4800, 9600 or 19200 bps
installed device	31
protection type	Phase failure (line) Thermal protection (motor) Thermal protection (starter)
marking	CE
type of cooling	Forced convection
operating position	Vertical +/- 10 degree
height	380 mm
width	320 mm
depth	265 mm
product weight	18.2 kg
power range	30...50 kW at 200...240 V 3 phases 55...100 kW at 380...440 V 3 phases 55...100 kW at 200...240 V 3 phases 110...220 kW at 380...440 V 3 phases 110...220 kW at 200...240 V 3 phases
motor starter type	Soft starter

Tiêu chuẩn môi trường hoạt động
electromagnetic compatibility	Conducted and radiated emissions conforming to IEC 60947-4-2 level A Damped oscillating waves conforming to IEC 61000-4-12 level 3 Electrostatic discharge conforming to IEC 61000-4-2 level 3 Immunity to electrical transients conforming to IEC 61000-4-4 level 4 Immunity to radiated radio-electrical interference conforming to IEC 61000-4-3 level 3 Voltage/current impulse conforming to IEC 61000-4-5 level 3
standards	EN/IEC 60947-4-2
product certifications	CCC CSA C-Tick DNV GOST NOM 117 SEPRO TCF UL
vibration resistance	1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f = 2...13 Hz) conforming to EN/IEC 60068-2-6
shock resistance	15 gn for 11 ms conforming to EN/IEC 60068-2-27
noise level	54 dB
pollution degree	Level 3 conforming to IEC 60664-1
relative humidity	0...95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation	40...60 °C with current derating of 2 % per °C -10...40 °C without derating
ambient air temperature for storage	-25...70 °C
operating altitude	<= 1000 m without derating > 1000...2000 m with current derating of 2.2 % per additional 100 m