Khởi động mềm AB Allen-Bradley Rockwell 150-F108NZD

Khởi động mềm AB Allen-Bradley Rockwell 150-F108NZD

848
Nhà sản xuất:

Allen-Bradley

;   

Xuất xứ: USA

Giá sỉ:

Giá tốt nhất xem...0909186879 dienelectrics@gmail.com

Khuyến mãi:Có Discount
Bảo hành:12 Tháng (Chính hãng)
Thanh toán:C.O.D / Bảo lãnh TT / Link hoạt
Vận chuyển:Miễn phí Tp.HCM, vùng lân cận
Thông tin nổi bật

Khởi động mềm AB Allen-Bradley Rockwell 150-F108NZD

 

Thông số kỹ thuật

 

Thông số điện
With display Yes
Voltage type for actuating AC
Rated operating voltage Ue 230 V
Rated control supply voltage at AC 50 Hz 100 V
Rated control supply voltage at AC 60 Hz 100 V
Overload current for line connected devices 27 A
Overload current for delta connected devices 47 A
Controller type Soft starter
Control options None
Trip classes 10, 15, 20 and 30
Trip current rating 117% of motor FLC
Transformer control module 75VA @ 100...240V AC (-15%, +10%)
Heatsink fan rating 20VA @ 110/120V AC or 220/240V AC
Repetitive peak inverse voltage rating 1800V per UL/CSA/NEMA for power circuit
Operating frequency 50/60 Hz for power circuit
Line connected motor power, max 90 kW @ 690V/Y AC, 50 Hz, 3-phase
Delta connected motor power, max 90 kW @ 400/415V AC, 50 Hz, 3-phase
Rated impulse voltage 6000V per IEC for power circuit
Dielectric withstand 2500V per IEC for power circuit
Line connected motor current 27...108 A @ 600/Y/690V AC, 3-phase
Delta connected motor current 47...187 A @ 500/575V AC, 3-phase
Ampere tested european style, max 6,9 gRB 73xxx400 6,6URD33xxx500 @ 690V for maximum FLC
Ampere tested north american style, max A070URD33xxx500 @ 690V for maximum FLC
Insulation voltage Rated 690V per IEC for power circuit
Rated operational voltage 230...690V/Y (–15%, +10%) per IEC for power circuit
Input OFF-state current <10 mA AC, <3 mA DC for control circuit @ input OFF-state voltage
Short-circuit protection device list Standard fuse, circuit breaker and high capacity time delay class CC/J/L
Number of contacts 1 for auxiliary contacts
High capacity available fault current, max 70 kA @ 600V, maximum current 300 A time delay Class J or Class L fuse for inside delta connected motors
Type of current AC for auxiliary contacts
Conventional thermal current (Ith) AC/DC: 5 A for auxiliary contacts
Type of control circuit Electromagnetic relay for auxiliary contacts
Type of contacts Programmable NO/NC for auxiliary contacts
Utilization category MG 1 per UL/CSA/NEMA for power circuit
Standard controller feature Status indication: stopped, starting, stopping, at speed, alarm and fault
Standard available fault current, max 70 kA @ 690V for maximum FLC
Optional controller feature SMB smart motor braking control: provides motor braking without additional equipment for applications that require the motor to stop quickly, braking current is adjustable from 0...400% of the motor’s full-load current rating
Integrated motor overload protection Yes
Short circuit protection device performance (SCPD) type Type 1
Number of sensors, max 6 for PTC input ratings
Inrush current control module 5 A @ 24V DC (-15%, +10%)
Voltage at PTC terminals (RPTC = open), max 30V for PTC input ratings
Transient watts control module 60 W @ 24V DC (-15%, +10%)
Steady state watts control module 24 W @ 24V DC (-15%, +10%)
Voltage at PTC terminals (RPTC = 4 kΩ), max <7.5 for PTC input ratings
Response time 800 ms for PTC input ratings
Inrush time control module 250 ms @ 24V DC (-15%, +10%)
Transient time control module 500 ms @ 24V DC (-15%, +10%)
Cold resistance of PTC sensor chain, max 1500 Ohm for PTC input ratings
Tachometer input 0...5V DC, 4.5V DC = 100% Speed
Allen bradley power supply control module, min 1606-XLP50E @ 24V DC (-15%, +10%)
Short circuit trip resistance 25 Ohm ± 10 Ohm for PTC input ratings
Response resistance 3400 Ohm ± 150 Ohm for PTC input ratings
Reset resistance 1600 Ohm ± 100 Ohm for PTC input ratings
Input OFF-state voltage, max 50V AC, 10V DC/12V AC for control circuit
Input ON-state voltage, min 85V AC, 19.2V DC/20.4V AC for control circuit
Rated operational current 3 A @ 120V AC, 1.5 A @ 240V AC for auxiliary contacts
Input ON-state current 20 mA @ 120V AC/40mA @ 240V AC, 7.6 mA @ 24V AC/DC for control circuit
Contact type auxiliary contacts 19/20 (Aux #1), 29/30 (Aux #2), 31/32 (Aux #3) and 33/34 (Aux #4)


Thông số môi trường vận hành

 

Steady state heat dissipation with control and fan power 91 W
Storage and transportation temperature -20 °C
Humidity 5...95% (noncondensing)
Operating temperature Open: -5 to 50 °C (23 to 122 °F)
Protection against electrical shock IP2X (with terminal covers) per IEC for power circuit
EMC emission levels Radiated emission: Class A
EMC immunity levels Surge transient: per EN/IEC 60947-4-2
Altitude 2000 m
Pollution degree 2

Thông số cơ học
Weight 15 kg
Shock Operational: 5.5 G
Width 196.4 mm (7.74 inch)
Depth 212.2 mm (8.35 inch)
Height 443.7 mm (17.47 inch)
Power pole construction Heatsink hockey puck thyristor modular design
Vibration Operational: 1.0 G peak, 0.15 mm (0.006 inch) displacement
Make 3600VA for auxiliary contacts
Break 360VA for auxiliary contacts
Internal bypass Yes
Function Single direction
Power terminal markings NEMA, CENELEC EN50 012
Control terminals Clamping yoke connection, M3 screw clamp


Thông số lắp đặt
Line/load side power terminals One M10 x 1.5 diameter hole per power pole
Number of poles 3
Enclosure Open type
Control modules construction Thermoset and thermoplastic moldings
Metal parts construction Plated brass, copper or painted steel


Chứng nhận
- China CCC
- Eurasion Economic Community
- Australian RCM
Sản phẩm cùng loại
Gọi điện thoại