Cảm biến tương phản 13mm PNP M12 5-Pin Sick KTX-WP92142252ZZZZ | 1078068

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm SICK

• 

  Phân biệt sự khác nhau giữa Cảm biến màu sắc Color sensors và Cảm biến tương phản Contrast sensors

• Xem thêm

Cảm biến tương phản 13mm PNP M12 5-Pin Sick KTX-WP92142252ZZZZ | 1078068

 

Features

Special applications	Standard
Device type	Standard
Dimensions (W x H x D)	30 mm x 53 mm x 78.5 mm
Sensing distance	≤ 13 mm
Sensing distance tolerance	± 5 mm
Housing design	Large
Light source	LED, RGB 1)
Wave length	470 nm, 525 nm, 625 nm
Light emission	Short device side
Light spot size	3.8 mm x 0.9 mm
Light spot direction	Horizontal 2)
Receiving filters	None
Teach-in mode	1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Output function	Light/dark switching
Delay time	Adjustable
Special features	-
Delivery status	2-point teach-in
Parameter presettings	None
Setting the key lock	Standard

¹⁾ Average service life: 100,000 h at T_U = +25 °C.
²⁾ In relation to long side of housing.
 

Mechanics/electronics

Supply voltage	10.8 V DC ... 28.8 V DC 1)
Ripple	≤ 5 Vpp 2)
Current consumption	< 100 mA 3)
Switching frequency	50 kHz 4) 5)
Response time	10 µs 6) 7)
Jitter	5 µs 8)
Switching output	PNP
Switching output (voltage)	PNP: HIGH = VS - 3 V / LOW = 0 V
Output current Imax.	100 mA 9)
Input, teach-in (ET)	Teach: U = 10 V ... < VS
Input, blanking input (AT)	Blanked: U = 10 V ... < Uv
Input, fine/coarse (F/C)	Coarse: U = 10 V ... < Uv
Input, light/dark (L/D)	Light: U = 10 V ... < Uv
Retention time (ET)	25 ms, non-volatile memory
Connection type	Male connector M12, 5-pin
Protection class	III
Circuit protection	UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression
Enclosure rating	IP67
Weight	94 g
Housing material	Plastic, VISTAL®
Optics material	Plastic, COP

¹⁾ Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
²⁾ May not exceed or fall below U_v tolerances.
³⁾ Without load.
⁴⁾ With light/dark ratio 1:1.
⁵⁾ 1-point teach-in (color mode): 16 kHz.
⁶⁾ Signal transit time with resistive load.
⁷⁾ 1-point teach-in (color mode): 30 µs.
⁸⁾ 1-point teach-in (color mode): 15 µs.
⁹⁾ Total current of all Outputs.
 

Ambient data

Ambient operating temperature	–20 °C ... +60 °C
Ambient temperature, storage	–25 °C ... +75 °C
Shock load	According to IEC 60068-2-27 (30 g/11 ms)
UL File No.	E181493

 

Classifications

eCl@ss 5.0	27270906
eCl@ss 5.1.4	27270906
eCl@ss 6.0	27270906
eCl@ss 6.2	27270906
eCl@ss 7.0	27270906
eCl@ss 8.0	27270906
eCl@ss 8.1	27270906
eCl@ss 9.0	27270906
eCl@ss 10.0	27270906
eCl@ss 11.0	27270906
eCl@ss 12.0	27270906
ETIM 5.0	EC001820
ETIM 6.0	EC001820
ETIM 7.0	EC001820
ETIM 8.0	EC001820
UNSPSC 16.0901	39121528

- Tài liệu kỹ thuật Sick KTX-WP92142252ZZZZ 1078068 ở đây.


Tham khảo thêm các model khác cùng loại:
KTX-WB9124225AZZZZ 
Part no.: 1221672
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 1.2 mm x 5.3 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9214225AZZZZZZZZDZZZZZZ1 
Part no.: 1221531
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP92342242ZZZZ 
Part no.: 1078137
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.9 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WN91342252ZZZZ 
Part no.: 1078133
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: NPN
Light spot size: 3.9 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91341252ZZZZ 
Part no.: 1078147
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: PNP
Light spot size: 3.9 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91342242ZZZZ 
Part no.: 1078135
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: PNP
Light spot size: 3.9 mm x 0.9 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WP92342252ZZZZ 
Part no.: 1078134
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91342252ZZZZ 
Part no.: 1078132
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: PNP
Light spot size: 3.9 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9A64225AZZZZ 
Part no.: 1220795
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 70 mm
Switching output: Push-pull: PNP/NPN
Light spot size: Ø 10 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9134125AZZZZ 
Part no.: 1220792
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 3.9 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9134225AZZZZ 
Part no.: 1220791
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 3.9 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9A94125AZZZZ 
Part no.: 1220802
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 150 mm
Switching output: Push-pull: PNP/NPN
Light spot size: Ø 12 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9A94225AZZZZ 
Part no.: 1220801
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 150 mm
Switching output: Push-pull: PNP/NPN
Light spot size: Ø 12 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9494125AZZZZ 
Part no.: 1220799
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 150 mm
Switching output: Push-pull: PNP/NPN
Light spot size: Ø 3.3 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9494225AZZZZ 
Part no.: 1220798
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 150 mm
Switching output: Push-pull: PNP/NPN
Light spot size: Ø 3.3 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9A64125AZZZZ 
Part no.: 1220796
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 70 mm
Switching output: Push-pull: PNP/NPN
Light spot size: Ø 10 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WN91342242ZZZZ 
Part no.: 1078136
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: NPN
Light spot size: 3.9 mm x 0.9 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WP91341242ZZZZ 
Part no.: 1078146
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: PNP
Light spot size: 3.9 mm x 0.9 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WB9A64125UZZZZ 
Part no.: 1078148
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 70 mm
Switching output: Push-pull: PNP/NPN
Light spot size: Ø 10 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9134125UZZZZ 
Part no.: 1220793
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 3.9 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9A64225UZZZZ 
Part no.: 1078141
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 70 mm
Switching output: Push-pull: PNP/NPN
Light spot size: Ø 10 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WN9234224IZZZZ 
Part no.: 1078139
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: NPN
Light spot size: 0.9 mm x 3.9 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WP9GA4124IZZZZ 
Part no.: 1078157
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 200 mm
Switching output: PNP
Light spot size: 30 mm x 35 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WP9134224IZZZZ 
Part no.: 1078138
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: PNP
Light spot size: 3.9 mm x 0.9 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WB9134225UZZZZ 
Part no.: 1078140
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 3.9 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WN91341242ZZZZ 
Part no.: 1078145
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 40 mm
Switching output: NPN
Light spot size: 3.9 mm x 0.9 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WBN1142252ZZZZ 
Part no.: 1220041
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: N-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WBN1141252ZZZZ 
Part no.: 1220055
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: N-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WBN114225AZZZZ 
Part no.: 1220042
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: N-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WBN114125AZZZZ 
Part no.: 1220056
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: N-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP92142252ZZZZ 
Part no.: 1220994
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WN91141252ZZZZ 
Part no.: 1078098
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91141252ZZZZ 
Part no.: 1078097
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB91142259ZZZZ 
Part no.: 1078096
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP92141252ZZZZ 
Part no.: 1078099
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WN92141252ZZZZ 
Part no.: 1078100
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91141242ZZZZ 
Part no.: 1078101
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WN91141242ZZZZ 
Part no.: 1078102
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WN91142242ZZZZ 
Part no.: 1078071
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WN92142242ZZZZ 
Part no.: 1078073
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WP91242252ZZZZ 
Part no.: 1078074
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: PNP
Light spot size: 1.2 mm x 5.3 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91142242ZZZZ 
Part no.: 1078070
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WN91242252ZZZZ 
Part no.: 1078075
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: NPN
Light spot size: 1.2 mm x 5.3 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP92242252ZZZZ 
Part no.: 1078076
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: PNP
Light spot size: 5.3 mm x 1.2 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91242242ZZZZ 
Part no.: 1078077
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: PNP
Light spot size: 1.2 mm x 5.3 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WN91242242ZZZZ 
Part no.: 1078078
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: NPN
Light spot size: 1.2 mm x 5.3 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WP92242242ZZZZ 
Part no.: 1078079
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: PNP
Light spot size: 5.3 mm x 1.2 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WB94142252ZZZZ 
Part no.: 1078094
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: Ø 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WN91142252ZZZZ 
Part no.: 1078067
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WN9114225UZZZZ 
Part no.: 1218271
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP92142242ZZZZ 
Part no.: 1078072
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WP91142252ZZZZ 
Part no.: 1078066
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP92142252ZZZZ 
Part no.: 1078068
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WN92142252ZZZZ 
Part no.: 1078069
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9114125AZZZZ 
Part no.: 1081728
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WN91142252ZZZZ 
Part no.: 1081724
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91142252ZZZZ 
Part no.: 1081723
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91141252ZZZZ 
Part no.: 1081725
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WN91141252ZZZZ 
Part no.: 1081726
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9114225AZZZZ 
Part no.: 1081727
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9124225AZZZZ 
Part no.: 1078083
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 1.2 mm x 5.3 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9224225AZZZZ 
Part no.: 1078084
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 5.3 mm x 1.2 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9114225AA90Z 
Part no.: 1078086
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Automation function, AFC90 (time stamp)
KTX-WB9114125AZZZZ 
Part no.: 1081721
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9214125AZZZZ 
Part no.: 1081722
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9114124UZZZZ 
Part no.: 1084196
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WP9214225AZZZZ 
Part no.: 1078081
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9114225AZZZZ 
Part no.: 1078080
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9214225AZZZZ 
Part no.: 1078082
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9214125UZZZZ 
Part no.: 1078112
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9124125UZZZZ 
Part no.: 1078113
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 1.2 mm x 5.3 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP9214225UZZZZ 
Part no.: 1078154
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP9114225UZZZZ 
Part no.: 1078164
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 2-point teach-in
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9114224UZZZZ 
Part no.: 1084195
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WP9114124IZZZZ 
Part no.: 1078109
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WB9114125UZZZZ 
Part no.: 1078111
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP9114125UZZZZ 
Part no.: 1078110
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB91141259ZZZZ 
Part no.: 1079090
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP9114224IZZZZ 
Part no.: 1078087
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WN9114224IZZZZ 
Part no.: 1078088
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WN9414224IZZZZ 
Part no.: 1078089
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: Ø 0.9 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WP9114225UZZZZ 
Part no.: 1078090
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9114225UZZZZ 
Part no.: 1078091
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9214225UZZZZ 
Part no.: 1078092
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9124225UZZZZ 
Part no.: 1078093
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 1.2 mm x 5.3 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WS91141242ZZZZ 
Part no.: 1078167
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP, NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WP91241252ZZZZ 
Part no.: 1078104
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: PNP
Light spot size: 1.2 mm x 5.3 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91241242ZZZZ 
Part no.: 1078106
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: PNP
Light spot size: 1.2 mm x 5.3 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WN91241242ZZZZ 
Part no.: 1078107
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: NPN
Light spot size: 1.2 mm x 5.3 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WN91241252ZZZZ 
Part no.: 1078105
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: NPN
Light spot size: 1.2 mm x 5.3 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP92241242ZZZZ 
Part no.: 1078108
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 25 mm
Switching output: PNP
Light spot size: 5.3 mm x 1.2 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WN94142252ZZZZ 
Part no.: 1078153
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: Ø 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP92141242ZZZZ 
Part no.: 1078103
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WS91142242ZZZZ 
Part no.: 1078166
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP, NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WN91142252ZZZZ 
Part no.: 1219737
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91142252ZZZZ 
Part no.: 1219607
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9114225UZZZZ 
Part no.: 1219608
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9114224UZZZZ 
Part no.: 1219610
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard
KTX-WB91142252ZZZZ 
Part no.: 1219736
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91142252ZZZZ 
Part no.: 1219605
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP9214125UZZZZ 
Part no.: 1223322
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP9114125UZZZZ 
Part no.: 1223321
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: Analog
Teach-in mode: 2-point teach-in
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91141252ZZZZ 
Part no.: 1222540
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP91141252ZZZZ 
Part no.: 1109466
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WN91141252ZZZZZ 
Part no.: 1109467
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: NPN
Light spot size: 0.9 mm x 3.8 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WP92142252ZZZZ 
Part no.: 1128351
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: -
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: PNP
Light spot size: 3.8 mm x 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard
KTX-WB9414125AZZZZ 
Part no.: 1113486
Contrast sensors
KTX Prime
Light source: LED, RGB
Communication interface: IO-Link
Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Sensing distance: 13 mm
Switching output: Push-pull: PNP/NPN
Light spot size: Ø 0.9 mm
Connection type Detail: Male connector M12, 5-pin
Device type: Standard

 

Contrast sensors

KTX Prime

Contrast detection with TwinEye-Technology in tried-and-tested housing. Innovation in familiar housing for the very best sensor performance
 

Your Benefits

- 1:1 replacement for existing KT series - assembly compatibility
- TwinEye-Technology for better performance on glossy or jittering materials - less machine downtime and more process stability
- Multi-functional sensor adjustment for individual sensor adjustment
- Excellent contrast resolution and a large dynamic range for good performance on complex materials
- High flexibility thanks to a range of teach-in processes
- Integrated color mode - stable detection even with complex color differences
- Job storage in sensor - flexible process design and format change
- Diagnostics and visualization as well as easy format change via IO-Link
 

Overview

Contrast detection with TwinEye-Technology in tried-and-tested housing. Innovation in familiar housing for the very best sensor performance

Outstanding performance for a variety of applications, even with difficult framework conditions: The new KTX Prime with familiar hole pattern, high-precision RGB LED and VISTAL® housing impresses with TwinEye-Technology, color mode, high switching frequency, excellent gray line resolution, 7-segment display and IO-Link. The response time of 10 µs and a jitter of 5 µs ensure accurate detection of contrast differences, even at high machine speeds. Thanks to various teach-in processes, integrated color mode and variable sensor adjustment, commissioning is more flexible and the processes more stable. The KTX Prime provides additional diagnosis and analysis data via IO-Link. The new KTX Prime - it can easily do more.
 

At a glance

- TwinEye-Technology for increased depth of field and sensing distance tolerance
- 50 kHz switching frequency and 5 μs jitter
- Large dynamic range means reliable detection of contrasts on glossy materials
- 7-segment display
- Color mode
- Assembly feedback
- IO-Link and automation functions
- Flexible sensor setting thanks to various sensor parameters
 

Applications

- Fields of applications
- Applications in which contrast is a distinguishing feature
- Print mark detection for controlling the cutting process
- Print control in the printing industry
- Positioning tubes
- Label alignment on bottles
- Monitoring of wafers
- Roll end monitoring
- Color control in yarn or line production
 

Examples of application

Precise detection of print marks

Wrapping machines use packaging materials on a roll, e.g. films. To cut these in the correct location, the cutting position is indicated by a print mark on the film. To ensure optimal sensor operation and to avoid scrap when changing over the foil, it is important to be able to quickly and precisely adjust the sensor at foil changeover. The KTS Prime smart sensor continuously checks for correct alignment of the sensor with the print marks during changeover, and reports the current alignment quality via the integrated display and also via IO-Link to a panel attached to the machine. This enables the correct adjustment of the sensor to be continuously monitored during machine operation.

Following product families can be used
KTX Prime
Contrast detection with TwinEye-Technology in tried-and-tested housing. Innovation in familiar housing for the very best sensor performance

- TwinEye-Technology for increased depth of field and sensing distance tolerance
- 50 kHz switching frequency and 5 μs jitter
- Large dynamic range means reliable detection of contrasts on glossy materials
- 7-segment display
- Color mode
- Assembly feedback
- IO-Link and automation functions
- Flexible sensor setting thanks to various sensor parameters

KTS Prime
Innovative TwinEye-Technology for better contrast detection

- TwinEye-Technology for increased depth of field and sensing distance tolerance
- 50 kHz switching frequency and 5 μs jitter
- Large dynamic range means reliable detection of contrasts on glossy materials
- 7-segment display
- Color mode
- Assembly feedback
- IO-Link and automation functions
- Flexible sensor setting thanks to various sensor parameters

KTM Prime
Mini, easy, speedy, robust

- High grayscale resolution
- Very large dynamic range means reliable detection of contrasts on glossy materials
- Static and dynamic teach-in in a single variant
- Switching frequency: Up to 15 kHz
- Sensing distance: 12.5 mm for RGB and white LED, up to 250 mm as laser variant
- IO-Link interface
 

Contrast mark detection

Fast, precise KTS and KTX contrast sensors features multi-colored light sources, such as RGB, white light or laser. They detect colors from very faint to high-gloss qualities. The contrast sensors have conventional interfaces, making them ideal for integration in all important industrial networks.

Following product families can be used
KTS Core
Universal contrast detection in modern housing

- White LED or RGB LED
- High gray line resolution
- Very large dynamic range means reliable detection of contrasts on glossy materials
- 25 kHz switching frequency
- Display for easy sensor adjustment
- 2-point and dynamic teach-in
- Manual switching threshold adjustment
- Light/dark switching

KTX Prime
Contrast detection with TwinEye-Technology in tried-and-tested housing. Innovation in familiar housing for the very best sensor performance

- TwinEye-Technology for increased depth of field and sensing distance tolerance
- 50 kHz switching frequency and 5 μs jitter
- Large dynamic range means reliable detection of contrasts on glossy materials
- 7-segment display
- Color mode
- Assembly feedback
- IO-Link and automation functions
- Flexible sensor setting thanks to various sensor parameters

KTS Prime
Innovative TwinEye-Technology for better contrast detection

- TwinEye-Technology for increased depth of field and sensing distance tolerance
- 50 kHz switching frequency and 5 μs jitter
- Large dynamic range means reliable detection of contrasts on glossy materials
- 7-segment display
- Color mode
- Assembly feedback
- IO-Link and automation functions
- Flexible sensor setting thanks to various sensor parameters
 

Detecting print marks

The KTX Prime or KTS Prime contrast sensors also detect narrow print marks precisely and very fast. This initiates further processes, such as perforation or folding at the correct position. The OMR codes (Optical Mark Recognition) control the insertion machine.

Following product families can be used
KTX Prime
Contrast detection with TwinEye-Technology in tried-and-tested housing. Innovation in familiar housing for the very best sensor performance

- TwinEye-Technology for increased depth of field and sensing distance tolerance
- 50 kHz switching frequency and 5 μs jitter
- Large dynamic range means reliable detection of contrasts on glossy materials
- 7-segment display
- Color mode
- Assembly feedback
- IO-Link and automation functions
- Flexible sensor setting thanks to various sensor parameters

KTS Prime
Innovative TwinEye-Technology for better contrast detection

- TwinEye-Technology for increased depth of field and sensing distance tolerance
- 50 kHz switching frequency and 5 μs jitter
- Large dynamic range means reliable detection of contrasts on glossy materials
- 7-segment display
- Color mode
- Assembly feedback
- IO-Link and automation functions
- Flexible sensor setting thanks to various sensor parameters
 

Technical overview

Technical data overview

Dimensions (W x H x D)	30 mm x 53 mm x 78.5 mm
Sensing distance	13 mm 40 mm 25 mm 150 mm 70 mm 200 mm
Type of light	LED, RGB 1)
Light spot size	0.9 mm x 3.8 mm 3.8 mm x 0.9 mm 0.9 mm x 3.9 mm Ø 0.9 mm 1.2 mm x 5.3 mm 3.9 mm x 0.9 mm 5.3 mm x 1.2 mm Ø 3.3 mm Ø 10 mm Ø 12 mm 30 mm x 35 mm
Switching frequency	11.5 kHz 2) 3) 50 kHz 2) 4) 70 kHz 2) 5) 6.25 kHz 2) 6) 25 kHz 2) 7)
Response time	42 µs 8) 9) 10 µs 10) 8) 3 µs 11) 8) 80 µs 12) 8) 20 µs 13) 8)
Switching output	Push-pull: PNP/NPN NPN PNP PNP, NPN
Adjustment	N-point teach-in, 2-point teach-in, teach-in dynamic, auto mode 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode 2-point teach-in
Connection type	Male connector M12, 5-pin / male connector M12, 4-pin
Communication interface	- IO-Link Analog

¹⁾ Average service life: 100,000 h at T_U = +25 °C.
²⁾ With light/dark ratio 1:1.
³⁾ Contrast mode: 35 kHz.
⁴⁾ 1-point teach-in (color mode): 16 kHz.
⁵⁾ 1-point teach-in (color mode): 23 kHz.
⁶⁾ 1-point teach-in (color mode): 2 kHz.
⁷⁾ 1-point teach-in (color mode): 8 kHz.
⁸⁾ Signal transit time with resistive load.
⁹⁾ Contrast mode: 14 µs.
¹⁰⁾ 1-point teach-in (color mode): 30 µs.
¹¹⁾ 1-point teach-in (color mode): 9 µs.
¹²⁾ 1-point teach-in (color mode): 240 µs.
¹³⁾ 1-point teach-in (color mode): 60 µs.