Product finder

Emergency stop modules

Emergency stop module, extremly small RK 5942

Width: 17,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
 

Emergency stop module UF 6925

Width: 17,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
 

Emergency stop module BG 5924

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC, AC/DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
 

Emergency stop module BG 5925

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC, AC/DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
 

Emergency stop module LG 5924

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
 

Emergency Stop Module LG 5925

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, AC/DC
Thermal current Ith max.: 8 A
1- / 2-channel: 1, 2
 

Safety Module for Elevator Controls LG 5925/034

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC/DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
 

Emergency Stop Module With Time Delay LG 5928

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 1, 2
 

Emergency stop module BD 5935

Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 10 A
1- / 2-channel: 1, 2
 

Emergency stop module BD 5987

Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 10 A
1- / 2-channel: 1, 2
 

Emergency stop module with voltage failure detection BH 5903

Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
 

Emergency stop module with time delay BH 5928

Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC, AC/DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
 

Emergency Stop Module With Time Delay BI 5928

Width: 67,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
 

Emergency stop module IP 5924

Width: 70 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, AC/DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
 

Emergency stop module with voltage failure detection BL 5903

Width: 90 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
 

Emergency stop module BN 5930.48/203

Width: 100 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 10 A
1- / 2-channel: 1, 2
 

Emergency stop module BN 5930.48/204

Width: 100 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 10 A
1- / 2-channel: 1, 2
 

Emergency stop module BN 5983

Width: 100 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 10 A
1- / 2-channel: 1, 2


Speed monitor, speed monitoring

Speed or standstill monitor BH 5932

Width: 45 mm
Classification: For initiators and encoders
Cat. / PL acc. to EN ISO 13849-1: 3/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, AC/DC
Thermal current Ith max.: 4 A
1- / 2-channel: 2
 

Standstill monitor LH 5946

Width: 45 mm
Classification: Sensorless
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 5 A
1- / 2-channel: 2
Measuring motor voltage max.: 690 V
 

Speed and standstill monitor UH 5947

Width: 45 mm
Classification: For initiators and encoders
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC, AC/DC
Thermal current Ith max.: 5 A
1- / 2-channel: 2
 

Speed monitor UH 6932

Width: 45 mm
Classification: For initiators and encoders
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
 

Speed and frequency monitor UH 6937

Width: 45 mm
Classification: Sensorless
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
Measuring motor voltage max.: 690 V
 

Standstill monitor UG 6946

Width: 22,5 mm
Classification: Sensorless
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 5 A
1- / 2-channel: 2
Measuring motor voltage max.: 690 V


Multifunctional safety solutions

Multifunctional safety timer with instantaneous contacts UG 6960

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
Application: Not-Aus, Lichtgitter, Schaltmatte, Schutztür, Zweihand
Safe output contacts, redundant NO contacts: 4
 

Multifunctional safety timer UG 6961

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
Application: Not-Aus, Lichtgitter, Schaltmatte, Schutztür, Zweihand
Safe output contacts, redundant NO contacts: 2
 

Multifunctional safety module UG 6970

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
Application: Not-Aus, Lichtgitter, Schaltmatte, Schutztür, Zweihand
Safe output contacts, redundant NO contacts: 4
 

Multifunctional safety module UG 6980

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
Application: Not-Aus, Lichtgitter, Schaltmatte, Schutztür, Zweihand
Safe output contacts, redundant NO contacts: 2
 

Multifunction safety module BH 5910

Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
Application: Not-Aus, Lichtgitter, Schutztür, Zweihand
Safe output contacts, redundant NO contacts: 3
 

Control Unit BH 5911

Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter
Safe output contacts, redundant NO contacts: 2, 3
 

Input module BG 5913.08/_0___

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Schutztür, Zweihand
Safety integrity level according to EN 574: lll A, lll C
 

Input module BG 5913.08/_1___

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Schutztür, Zweihand
Safety integrity level according to EN 574: lll C
 

Input module BG 5913.08/_2___

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Schutztür, Zweihand
Safety integrity level according to EN 574: lll C
 

Input module BG 5913.08/_3___

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Zweihand
Safety integrity level according to EN 574: lll C
 

Input Module BH 5913.08/_0___

Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Schutztür, Zweihand
Safety integrity level according to EN 574: lll A, lll C
Galvanically isolated inputs: Yes
 

Input Module BG 5914.08/_0___

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 2/d
SIL CL acc. to IEC/EN 62061: 2
Application: Not-Aus, Lichtgitter
 

Input Module BH 5914.08/_0___

Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 2/d
SIL CL acc. to IEC/EN 62061: 2
Application: Not-Aus, Lichtgitter
Galvanically isolated inputs: Yes
 

Input Module BG 5915.08/_1___

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Schutztür
 

Input Module BH 5915.08/_1___

Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Schutztür
Galvanically isolated inputs: Yes
 

Output Module With Output Contacts BG 5912

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safe output contacts, redundant NO contacts: 3, 4
Safe output contacts, time delay: 2, 3
 

Diagnostic Module for Profibus DP BH 5552

Width: 45 mm
 

Control unit UG 6911.10

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 8
2-channel safety outputs OSSD: 2
 

Control unit UG 6911.12/080

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 8
1-channel safety outputs OSSD: 4
 

Input / Output module UG 6916.10

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 8
2-channel safety outputs OSSD: 2
 

Input / Output module UG 6916.12/080

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 8
1-channel safety outputs OSSD: 4
 

Input module UG 6913.08

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 8
 

Input module UG 6913.12

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 12
 

Input module UG 6913.16

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 16
 

Output module OSSD UG 6912.02

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
2-channel safety outputs OSSD: 2
 

Output module OSSD UG 6912.04

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
2-channel safety outputs OSSD: 4
 

Output module relay UG 6912.14

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety NO contacts: 1 x 2
NC contacts: 1 x 1
 

Output module relay UG 6912.28

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety NO contacts: 2 x 2
NC contacts: 2 x 1
 

Output module relay UG 6914.04/000

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety NO contacts: 4
 

Output module relay UG 6914.04/008

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety NO contacts: 4
 

Speed monitoring module UG 6917/002

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors
 

Speed monitoring module UG 6917/102

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors, 1 TTL Encoder
 

Speed monitoring module UG 6917/202

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors, 1 HTL Encoder
 

Speed monitoring module UG 6917/302

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors, 1 Sin/Cos Encoder
 

Speed monitoring module UG 6917/112

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors, 2 TTL Encoder
 

Speed monitoring module UG 6917/222

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors, 2 HTL Encoder
 

Speed monitoring module UG 6917/332

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors, 2 Sin/Cos Encoder
 

Bus Extender UG 6918

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
 

Fieldbus module CANopen UG 6951

Width: 22,5 mm
 

Fieldbus module PROFIBUS DP UG 6952

Width: 22,5 mm
 

Fieldbus module PROFINET UG 6954

Width: 22,5 mm
 

Fieldbus module Ethernet/IP UG 6955

Width: 22,5 mm
 

Fieldbus module EtherCAT UG 6956

Width: 22,5 mm
 

Fieldbus module Modbus TCP/IP UG 6958

Width: 22,5 mm
 

Fieldbus module Modbus RTU UG 6959

Width: 22,5 mm


Wireless Safety System

Radio controlled safety module UH 6900

Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Frequency band: 433 / 434, 869 MHz
2-channel safety inputs max.: 3
 

Radio controlled safety module (Group controller) UH 6900 GC

Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Frequency band: 433 / 434, 869 MHz
2-channel safety inputs max.: 3
 

Radio controlled safety module (Group receiver) UH 6900 GR

Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Frequency band: 433 / 434, 869 MHz
2-channel safety inputs max.: 3
 

Radio Controlled Safety Module BI 6910

Width: 67,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
Application: Not-Aus, Lichtgitter, Schutztür, Start, Wireless
Safe output contacts, redundant NO contacts: 3
NC contacts: 1
 

Radio controlled enabling switch RE 6910

Width: 75 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
 

Radio controlled safety module BI 5910

Width: 67,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
Application: Not-Aus, Lichtgitter, Schutztür, Start, Wireless
Safe output contacts, redundant NO contacts: 3
NC contacts: 1
 

Remote Control for E-Stop RE 5910

Width: 46 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e


Residual current monitors, Residual current monitoring

Residual current monitor, Type A IL 5882

Width: 35 mm
Adjustable measuring ranges: 0,01 - 10, 0,01 - 30 A
Operate delay: Yes
Classification: Type A (AC, DC pulsating)
 

Residual current monitor, Type A SL 5882

Width: 35 mm
Adjustable measuring ranges: 0,01 - 10, 0,01 - 30 A
Operate delay: Yes
Classification: Type A (AC, DC pulsating)
 

Residual current monitor, Type B RN 5883

Width: 52,5 mm
Adjustable measuring ranges: 0,01 - 3 A
Operate delay: Yes
Classification: Type B (AC, DC even and pulsating)
 

Residual current monitor, Type A, with integrated transformer IR 5882

Width: 105 mm
Adjustable measuring ranges: 0,01 - 10, 0,01 - 30 A
Operate delay: Yes
Classification: Type A (AC, DC pulsating)


Insulation monitors

Insulation monitor MK 5880N

Width: 22,5 mm
Response value: 5 - 100 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC, DC
 

Insulation monitor IL 5880

Width: 35 mm
Response value: 5 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC, DC
 

Insulation monitor IL 5881

Width: 35 mm
Response value: 5 - 500 kΩ
IMD type: DC
Nominal voltage IT system: DC 12 - 280, DC 24 - 500 V
Auxiliary voltage: DC
 

Insulation monitor SL 5880

Width: 35 mm
Response value: 5 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC, DC
 

Insulation monitor SL 5881

Width: 35 mm
Response value: 5 - 500 kΩ
IMD type: DC
Nominal voltage IT system: DC 12 - 280, DC 24 - 500 V
Auxiliary voltage: Without, AC, DC
 

Insulation monitor AI 897

Width: 45 mm
Response value: 10 - 80 kΩ
IMD type: AC
Nominal voltage IT system: AC 24 - 500 V
Auxiliary voltage: Without
 

Insulation Monitoring Relay BD 5877/241

Width: 45 mm
Response value: 200 - 2000 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 400 V
Auxiliary voltage: AC
 

Insulation monitor MH 5880

Width: 45 mm
Response value: 5 - 100 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC, DC
 

Insulation monitor UH 5892

Width: 45 mm
Response value: 50 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 400, DC 0 - 600 V
Auxiliary voltage: AC/DC
 

Insulation monitor IN 5880/711

Width: 52,5 mm
Classification: For medically used rooms
Response value: 50 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC
 

Insulation monitor RN 5897/010

Width: 52,5 mm
Response value: 1 - 250 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 250, AC 0 - 690 (Vorschaltgerät), DC 0 - 300, DC 0 - 1000 (Vorschaltgerät) V
Auxiliary voltage: DC, AC/DC
 

Insulation monitor RN 5897/020

Width: 52,5 mm
Classification: For DC charging stations
Response value: 1 - 100 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 250, AC 0 - 690 (Vorschaltgerät), DC 0 - 300, DC 0 - 1000 (Vorschaltgerät) V
Auxiliary voltage: DC, AC/DC
 

Insulation monitor RN 5897/240

Width: 52,5 mm
Classification: For DC charging stations
Response value: 1 - 500 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 690 (Vorschaltgerät), DC 0 - 1000 (Vorschaltgerät) V
Auxiliary voltage: DC, AC/DC
 

Insulation monitor RN 5897/300

Width: 52,5 mm
Classification: For mobile power generators
Response value: 10 - 250 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 300, DC 0 - 300 V
Auxiliary voltage: DC, AC/DC
 

Insulation monitor RN 5897/320

Width: 52,5 mm
Classification: For DC charging stations
Response value: 1 - 100 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 690 (Vorschaltgerät), DC 0 - 1000 (Vorschaltgerät) V
Auxiliary voltage: DC, AC/DC
 

Insulation Monitor IP 5880

Width: 35 mm
Response value: 5 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC/DC
 

Insulation monitor IP 5880/711

Width: 70 mm
Classification: For medically used rooms
Response value: 50 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC
 

Insulation monitor RP 5888

Width: 70 mm
Response value: 5 - 5000 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC/DC
 

Insulation monitor LK 5894

Width: 90 mm
Response value: 1 - 250 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 690, DC 0 - 690 V
Auxiliary voltage: DC
 

Insulation monitor LK 5895

Width: 90 mm
Classification: For photovoltaic systems
Response value: 1 - 250 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 1000, DC 0 - 1000 V
Auxiliary voltage: DC
 

Insulation monitor LK 5896

Width: 90 mm
Classification: For photovoltaic systems
Response value: 1 - 250 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 1000, DC 0 - 1000 V
Auxiliary voltage: DC
 

Insulation monitor LK 5896/900

Width: 90 mm
Response value: 1 - 250 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 1000, DC 0 - 1000 V
Auxiliary voltage: DC
 

Insulation Monitor EH 5878

Width: 96 mm
Response value: 50 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC
 

Insulation monitor AN 5873

Width: 100 mm
Response value: 50 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: 3AC 24 - 690, DC 0 - 1000 V
Auxiliary voltage: AC
 

Insulation Monitor AN 5892

Width: 100 mm
Response value: 50 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 1000, DC 0 - 1500 V
Auxiliary voltage: AC
 

Insulation monitor AN 5892/800

Width: 100 mm
Response value: 50 kΩ
IMD type: DC
Nominal voltage IT system: DC 100 - 1000 V
Auxiliary voltage: AC
 

IT Line Monitor IR 9112/710

Width: 105 mm
Response value: 50 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 300 V
Auxiliary voltage: AC
 

IT Line Monitor IS 9112/711

Width: 140 mm
Response value: 50 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 300 V
Auxiliary voltage: AC
 

IT Line Monitor IS 9112/712

Width: 140 mm
Response value: 50 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 300 V
Auxiliary voltage: AC


Smart motor starters, multifunctional motor starters

Smart motorstarter UG 9256

Width: 22,5 mm
1- / 3-phase: 3
Auxiliary voltage: DC 24 V
Load voltage up to: 3AC 200 - 480 V
Load current up to: 9 A
 

Smart motorstarter with autom. phase sequence correction UG 9256/804

Width: 22,5 mm
1- / 3-phase: 3
Auxiliary voltage: DC 24 V
Load voltage up to: 3AC 200 - 480 V
Load current up to: 9 A
 

Smart motorstarter with autom. phase sequence correction UG 9256/807

Width: 22,5 mm
1- / 3-phase: 3
Auxiliary voltage: DC 24 V
Load voltage up to: 3AC 200 - 480 V
Load current up to: 9 A
 

Smart motorstarter, for Modbus UG 9410

Width: 22,5 mm
1- / 3-phase: 3
Auxiliary voltage: DC 24 V
Load voltage up to: 3AC 200 - 480 V
Load current up to: 5 A
Bus interface: Modbus RTU
 

Smart motorstarter, for Modbus UG 9411

Width: 22,5 mm
1- / 3-phase: 1
Auxiliary voltage: DC 24 V
Load voltage up to: AC 230 V
Load current up to: 7 A
Bus interface: Modbus RTU


Softstarters

Softstarter with softstop UG 9019

Widths: 22,5 mm
Load voltage up to: 3AC 480 V
For three-phase motors, 400 V up to: 4 kW
 

Softstarter IL 9017

Widths: 35 mm
Load voltage up to: AC 230 V
For single-phase motors, 230 V up to: 1,5 kW
 

Softstarter with softstop IL 9017/300

Widths: 35 mm
Load voltage up to: AC 230 V
For single-phase motors, 230 V up to: 1,5 kW
 

Softstarter SL 9017

Widths: 35 mm
Load voltage up to: AC 230 V
For single-phase motors, 230 V up to: 1,5 kW
 

Softstarter BA 9010

Widths: 45 mm
Load voltage up to: 3AC 230 / 400 V
For three-phase motors, 400 V up to: 5,5 kW
For single-phase motors, 230 V up to: 3 kW
 

Softstarter With Softstop BA 9018

Widths: 45 mm
Load voltage up to: 3AC 400 V
For three-phase motors, 400 V up to: 5,5 kW
 

Softstarter with softstop BA 9019

Widths: 45 mm
Load voltage up to: 3AC 460 V
For three-phase motors, 400 V up to: 5,5 kW
 

Softstarter with softstop BA 9026

Widths: 45 mm
Load voltage up to: 3AC 460 V
For three-phase motors, 400 V up to: 5,5 kW
 

Softstarter and softstop device GF 9016

Widths: 52,5, 45 mm
Load voltage up to: 3AC 400 V
For three-phase motors, 400 V up to: 22 kW
 

Softstarter UH 9018

Widths: 45 mm
Load voltage up to: 3AC 400 V
For three-phase motors, 400 V up to: 7,5 kW
 

Softstarter PF 9015

Widths: 67,5 mm
Load voltage up to: 3AC 480 V
For three-phase motors, 400 V up to: 7,5 kW
 

Softstarter for heating pumps PF 9029

Widths: 67,5 mm
Load voltage up to: 3AC 460 V
For three-phase motors, 400 V up to: 18,5 kW
 

Softstart / Softstop with reverse function RP 9210/300

Widths: 72 mm
Load voltage up to: 3AC 400 V
For three-phase motors, 400 V up to: 0,75 kW
 

Softstarter BI 9025

Widths: 90 mm
Load voltage up to: 3AC 480 V
For three-phase motors, 400 V up to: 15 kW
 

Softstarter with DC-brake BI 9028

Widths: 90 mm
Load voltage up to: 3AC 480 V
For three-phase motors, 400 V up to: 15 kW
 

Softstarter For 1-phase Motors BI 9028/900

Widths: 90 mm
Load voltage up to: AC 230 V
For single-phase motors, 230 V up to: 5 kW
 

Softstarter BL 9025

Widths: 90 mm
Load voltage up to: 3AC 480 V
For three-phase motors, 400 V up to: 11 kW
 

Softstarter BN 9011

Widths: 100 mm
Load voltage up to: 3AC 230 / 400 V
For three-phase motors, 400 V up to: 11 kW
For single-phase motors, 230 V up to: 5,5 kW
 

Softstarter with DC-brake GF 9229

Widths: 103, 205 mm
Load voltage up to: 3AC 575 V
For three-phase motors, 400 V up to: 30 kW
 

Softstarter IR 9027

Widths: 105 mm
Load voltage up to: 3AC 400 V
For three-phase motors, 400 V up to: 5,5 kW
 

Softstarter with braking function BL 9028

Widths: 112,5 mm
Load voltage up to: 3AC 480 V
For three-phase motors, 400 V up to: 15 kW
 

Softstarter With DC-Brake BL 9228

Widths: 90, 112,5 mm
Load voltage up to: AC 480 V
For three-phase motors, 400 V up to: 15 kW