Thông tin chi tiết của
Bộ nguồn Phoenix Contact 24V-20A Power supply unit - TRIO-PS/1AC/24DC/20 - 2866381
Output: 24VDC, 20A
Input AC: 85VAC - 264VDC, vỏ kim loại
Your advantages
- Use the third negative terminal block as a grounding terminal block and minimize installation costs
- Maximum operational reliability thanks to high MTBF (mean time between failures) of more than 500,000 hours and high dielectric strength of up to 300 V AC
- Rugged design with metal housing and wide temperature range from -25 to +70°C
- Compensation of voltage drops by means of output voltage that can be adjusted on the front
Bản vẽ thiết kế của Bộ nguồn Phoenix Contact 24-20A Power supply unit - TRIO-PS/1AC/24DC/20 - 2866381

Dimensions
Width |
115 mm |
Height |
130 mm |
Depth |
152.5 mm |
Ambient conditions
Degree of protection |
IP20 |
Ambient temperature (operation) |
-25 °C ... 70 °C (> 55° C derating : 2.5%/K) |
Ambient temperature (storage/transport) |
-40 °C ... 85 °C |
Max. permissible relative humidity (operation) |
≤ 95 % (at 25 °C, non-condensing) |
Climatic class |
3K3 (in acc. with EN 60721) |
Degree of pollution |
2 |
Input data
Nominal input voltage range |
100 V AC ... 240 V AC |
Input voltage range |
85 V AC ... 264 V AC (Derating < 90 V AC: 2,5 % / V) |
Dielectric strength maximum |
300 V AC |
AC frequency range |
45 Hz ... 65 Hz |
Discharge current to PE |
< 3.5 mA |
Current consumption |
4.6 A (120 V AC) |
|
2.4 A (230 V AC) |
Inrush surge current |
< 15 A |
Power failure bypass |
> 13 ms (120 V AC) |
|
> 13 ms (230 V AC) |
Input fuse |
10 A (slow-blow, internal) |
Choice of suitable circuit breakers |
16 A (Characteristics B, C, D, K) |
Power factor (cos phi) |
0.99 |
Type of protection |
Transient surge protection |
Protective circuit/component |
Varistor |
Output data
Nominal output voltage |
24 V DC ±1 % |
Setting range of the output voltage (USet) |
22.5 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted) |
Nominal output current (IN) |
20 A (UOUT = 24 V DC) |
Derating |
55 °C ... 70 °C (2.5%/K) |
Connection in parallel |
Yes, for redundancy and increased capacity |
Connection in series |
yes |
Feedback resistance |
35 V DC |
Circuit breaker against surge voltage at output by invasive foreign matter |
< 35 V DC |
Max. capacitive load |
Unlimited |
Active current limitation |
Approx. 25 A (for short-circuit) |
Control deviation |
< 1 % (change in load, static 10 % ... 90 %) |
|
< 2 % (change in load, dynamic 10 % ... 90 %) |
|
< 0.1 % (change in input voltage ±10 %) |
Residual ripple |
< 10 mVPP |
Output power |
480 W |
Typical response time |
< 1 s |
Peak switching voltages nominal load |
< 80 mVPP |
Maximum power dissipation in no-load condition |
4 W |
Power loss nominal load max. |
46 W |
General
Net weight |
2.2 kg |
Operating voltage display |
Green LED |
Efficiency |
91 % (for 230 V AC and nominal values) |
Insulation voltage input/output |
4 kV AC (type test) |
|
2 kV AC (routine test) |
Insulation voltage input / PE |
2 kV AC (type test) |
|
2 kV AC (routine test) |
Insulation voltage output / PE |
500 V DC (type test) |
Protection class |
I (with PE connection) |
Degree of protection |
IP20 |
MTBF (IEC 61709, SN 29500) |
> 915000 h |
Mounting position |
horizontal DIN rail NS 35, EN 60715 |
Assembly instructions |
Can be aligned: Horizontally 0 mm, vertically 50 mm |
Connection data, input
Connection method |
Screw connection |
Conductor cross section solid min. |
0.2 mm² |
Conductor cross section solid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
24 |
Conductor cross section AWG max. |
14 |
Stripping length |
9 mm |
Screw thread |
M2,5 |
Connection data, output
Connection method |
Screw connection |
Conductor cross section solid min. |
0.5 mm² |
Conductor cross section solid max. |
6 mm² |
Conductor cross section flexible min. |
0.5 mm² |
Conductor cross section flexible max. |
4 mm² |
Conductor cross section AWG min. |
20 |
Conductor cross section AWG max. |
10 |
Stripping length |
14 mm |
Screw thread |
M3 |
Signaling
Status display |
"DC OK" LED green |
Note on status display |
UOUT > 21.5 V: LED lights up |
Standards and Regulations
Electromagnetic compatibility |
Conformance with EMC Directive 2014/30/EU |
Noise immunity |
EN 61000-6-2:2005 |
Connection in acc. with standard |
CUL |
Standards/regulations |
EN 61000-4-2 |
Contact discharge |
4 kV (Test Level 2) |
Standards/regulations |
EN 61000-4-3 |
Frequency range |
80 MHz ... 1 GHz |
Test field strength |
10 V/m |
Frequency range |
1.4 GHz ... 2 GHz |
Test field strength |
3 V/m |
Standards/regulations |
EN 61000-4-4 |
Comments |
Criterion B |
Standards/regulations |
EN 61000-4-5 |
|
EN 61000-6-3 |
|
EN 61000-4-6 |
Frequency range |
0.15 MHz ... 80 MHz |
Voltage |
10 V (Test Level 3) |
Standards/regulations |
EN 61000-4-11 |
Low Voltage Directive |
Conformance with LV directive 2006/95/EC |
Standard - Electrical safety |
EN 60950-1/VDE 0805 (SELV) |
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations |
EN 50178/VDE 0160 (PELV) |
Standard – Safety extra-low voltage |
EN 60950-1 (SELV) |
|
EN 60204 (PELV) |
Standard - Safe isolation |
DIN VDE 0100-410 |
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment |
EN 50178 |
Standard – Limitation of mains harmonic currents |
EN 61000-3-2 |
UL approvals |
UL/C-UL listed UL 508 |
|
UL/C-UL Recognized UL 60950-1 |
Shock |
18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) |
< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
|
15 Hz ... 150 Hz, 2.3g, 90 min. |
Classifications
eCl@ss
eCl@ss 4.0 |
27040702 |
eCl@ss 4.1 |
27040702 |
eCl@ss 5.0 |
27049002 |
eCl@ss 5.1 |
27049002 |
eCl@ss 6.0 |
27049002 |
eCl@ss 7.0 |
27049002 |
eCl@ss 8.0 |
27049002 |
eCl@ss 9.0 |
27040701 |
ETIM
ETIM 2.0 |
EC001039 |
ETIM 3.0 |
EC001039 |
ETIM 4.0 |
EC000599 |
ETIM 5.0 |
EC002540 |
ETIM 6.0 |
EC002540 |
UNSPSC
UNSPSC 6.01 |
30211502 |
UNSPSC 7.0901 |
39121004 |
UNSPSC 11 |
39121004 |
UNSPSC 12.01 |
39121004 |
UNSPSC 13.2 |
39121004 |
Approvals